|
|
|
Machinery Accessories - Band Saws
|
COOL BLOCKS® FINE TUNE YOUR BAND SAW
|
| Cool Blocks 14" Jet, Grizzly
...plus other(s)
|
THE HEAT AND FRICTION CAUSED BY METAL GUIDE BLOCKS ARE ELIMINATED WITH PATENTED OLSON® COOL BLOCKS®, WHICH REPLACE YOUR STANDARD UPPER AND LOWER BLADE GUIDES, ALLOWING BLADES TO RUN COOLER, QUIETER AND LAST LONGER - FOUR-PIECE SETS REQUIRE NO BAND SAW MODIFICATION:
CB50000 - DELTA® 14"
|
|
|
|
Machinery Accessories - Band Saws
|
BRETT-GUARD® BAND SAW GUARD ADDS SAFETY AND VISIBILITY TO YOUR WORK
|
| Brett Band Saw Guard, Jet 14"
...plus other(s)
|
BUILT-IN 120V LIGHT NOT ONLY ILLUMINATES THE CUTTING LINE BUT ALSO BRIGHTENS THE WORK AREA WHEN YOU USE THE BRETT-GUARD® BAND SAW GUARD, FROM HTC PRODUCTS:
GUARD MOUNTS AT AN ANGLE TO PREVENT INTERFERENCE WITH SAW GUIDE COMPONENTS. A SINGLE KNOB ADJUSTS THE CLEAR, PLEXIGLAS SHIELD. ATTACHED TO THE BLADE SUPPORT ARM, IT MOVES AS YOU ADJUST DEPTH OF CUT. A-100-4 FITS JET® 14" BANDSAWS. A-100-14 FITS DELTA® 14" BANDSAWS. MOUNTING BRACKET, POWER CORD, HARDWARE AND INSTRUCTIONS INCLUDED. SHIPPING WEIGHT 6 LBS.
|
|
|
|
Machinery Accessories - Band Saws
|
CERAMIC GUIDE BLOCKS AND BEARINGS IMPROVE BAND SAW PERFORMANCE
|
| Ceramic Guide Blocks For Jet 14"
...plus other(s)
|
GET COOLER, QUIETER BANDSAW OPERATION WITH ALUMINA-OXIDE SPACEAGE CERAMIC GUIDEBLOCKS® AND THRUST BEARINGS. FOUR-PIECE GUIDE BLOCK SETS HANDLE UPPER AND LOWER GUIDES AND WORK WITH ANY BLADE WIDTH:
108-443 SET FITS DELTA® 14" BAND SAWS (THREE 1/2" X 1/2" X 3/4" BLOCKS; ONE 1/2" X 3/8" X 1"). 108-737 SET IS DESIGNED FOR JET®, GRIZZLY®, OTHER IMPORTED 14" PLUS GENERAL 15" BAND SAWS (FOUR 1/2" X 1/2" X 3/4" BLOCKS). 126-461 TWO-PIECE THRUST BEARING SET (1-3/16 DIA. W/WASHERS) REPLACES DELTA®, JET®, GRIZZLY® AND OTHER IMPORTED 14" BAND SAW UPPER AND LOWER BEARINGS. INSTALLATION INSTRUCTIONS INCLUDED. LIFETIME MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
ZERO CLEARANCE TABLE INSERTS FOR DELTA® AND JET® BAND SAWS
|
| Zero Clearance Insert (yellow)
...plus other(s)
|
MADE OF 30% GLASS FILLED ABS PLASTIC FOR EXTREME DURABILITY AND RESILIENCY, ZERO CLEARANCE TABLE INSERTS HELP PROTECT BAND SAW BLADES IN CASE OF ACCIDENTAL CONTACT:
SPECIFICALLY DESIGNED TO FIT DELTA® AND JET 14" BAND SAWS. 2.49" DIA. X 3/32" THICK; KEEP SEVERAL ON HAND FOR USE WITH VARIOUS BLADES. A LOCATOR LINE MAKES IT EASY TO MAKE THE INITIAL CUT TO FIT THE DESIRED BLADE FOR PERFECT ZERO CLEARANCE CUTTING. SOLD IN PACKAGES OF FOUR - DELTA® INSERTS ARE YELLOW; JET® ARE WHITE.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
WOODTEK 13" PORTABLE THICKNESS PLANER
|
| 13" Knives, Wdtk 115-946 & Jet 13"
...plus other(s)
|
|
|
|
Machinery Accessories - Lathes
|
JET® LIVE CENTER
|
| Live Center System, #1mt
...plus other(s)
|
JET® LIVE CENTERS ARE CONSTRUCTED WITH TWO HIGH QUALITY SEALED BALL BEARINGS MOUNTED IN TANDEM AND LUBRICATED FOR LIFE:
AVAILABLE IN #1 OR #2 MORSE TAPER. SYSTEM INCLUDES LIVE CENTER BODY, ADJUSTABLE CENTER POINT, REVERSIBLE BULL NOSE CONE, FULL POINT CONE AND KNOCK OUT ROD. 90-DAY MANUFACTURER'S WARRANTY. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ECONOMY DRIVE CENTERS - 136-883. JET DRIVE CENTERS - 136-922. ONEWAY DRIVE CENTERS - 882-917. SORBY STEBCENTERS - 137-168.
|
|
|
|
Machinery Accessories - Lathes
|
JET® SPINDLE ADAPTERS
|
| 3/4"x16tpi To 1"x8tpi Adapter
...plus other(s)
|
IF YOU HAVE MORE THAN ONE LATHE WITH DIFFERENT SPINDLE SIZES, JET® SPINDLE ADAPTERS CAN HELP YOU AVOID THE EXPENSE AND INCONVENIENCE OF BUYING MULTIPLE CHUCKS AND FACEPLATES:
SPINDLE ADAPTERS ALLOW YOU TO SWAP CHUCKS, FACEPLATES AND OTHER SPINDLE ACCESSORIES FROM ONE LATHE TO ANOTHER. MANUFACTURED TO THE STRICTEST TOLERANCES. 90-DAY MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Mobile Bases
|
EASY MACHINE MOVEMENT, GUARANTEED - HTC MOBILE BASES WORK BETTER THAN ANY CASTER SYSTEM
|
| Mobile Base, Jet 14" Band Saw
...plus other(s)
|
MAKE YOUR POWER TOOLS EASY TO MOVE OR STORE. WHEN YOU WANT ONE, SIMPLY ROLL IT ON ITS HTC MOBILE BASE TO WHERE YOU NEED IT - WHEN YOU'RE DONE, ROLL IT BACK:
THREE POINT LEVELING SYSTEM PROVIDES A SOLID, STABLE STANCE THAT REQUIRES NO TILTING OR ADJUSTING - SEAMLESS WELDING WITH ALL STEEL TUBULAR CONSTRUCTION FOR EXTRA STRENGTH. TWO RIGID WHEELS WITH LOCKING MECHANISMS AND ONE LOCKING SWIVEL WHEEL RAISE MACHINES 3/4" ABOVE FLOOR, ELIMINATING THE NEED TO RECALIBRATE MACHINE SETTINGS THAT CAN BE THROWN OFF BY RAISING AND LOWERING THE MACHINE
HRC-10 - (FITS INSIDE LEGS) DELTA® OLDER 50-315 CONTRACTOR'S SAW® WITH 25" STANDARD FENCE. HRD-10 - DELTA® 34-444, 36-440 AND 36-444 10" CONTRACTOR'S SAW® AND BENCH SAWS. HRLB-6 - DELTA® OLDER MODEL 14" BANDSAW, 6" BELT AND/OR 12" DISC SANDER AND OLDER MODEL 6" JOINTER WITH ENCLOSED TAPERED STANDS; ENCO® 199-9001, -9005, -9011 14" BANDSAWS. HRS-10 - DELTA® UNISAW® WITH 25" FENCE; JET JTAS-10 10" TABLESAW WITH STANDARD FENCE; GRIZZLY® G-1023, G-1023Z TABLESAWS; STAR TOOLS/ENLON IMPORT S3202, EN3202 TABLESAWS; JET OVS-10 SPINDLE SANDER; BRIDGEWOOD® YC-15P PLANER; DELTA® 43-370 THROUGH -386, TWO SPEED SHAPERS. HRBS-14 - DELTA® OLDER MODEL 50-312 FLARED LEG 14" BANDSAW. HRO-14 - DELTA® 28-275 AND 50-313 14" FOUR LEG BANDSAWS; DELTA® 43-355 SHAPER. HRSS-18 - DELTA® 40-560, -601, -640 16", 18", 20" SCROLL SAWS; LOBO MACHINERY CORP. JT-8 8" JOINTER. HRL-12 - DELTA® 12" STANDARD DUTY LATHE. HRJ-15 - DELTA® DJ-15 6" JOINTER; JET OLDER MODEL JBS-14 OS 14" BANDSAW; STAR TOOLS/ENLON IMPORT ENBS14N 14" BANDSAW; BRIDGEWOOD® YC-8J 8" JOINTER. HRD-10-X - DELTA® 34-445 & 36-490, -455 10" CONTRACTOR'S SAW® AND BENCH SAWS WITH 30" FENCE. HRS-8-X - DELTA® 36-751 10" CABINET SAW WITH 30" FENCE. HRS-8-G - DELTA® 36-752 10" CABINET SAW WITH 52" FENCE. HSJ-1413 - JET JWBS-14C 14" CLOSED STAND BANDSAW. HJTS-761 - JET 10" CONTRACTOR SAW; STAR TOOLS/ENLON IMPORT S3501 14.5" BANDSAW. HSK-593 - DELTA® 17-900 DRILL PRESS; GENERAL INTERNATIONAL 75-100 & 75-200 17" DRILL PRESSES; JET JDP-17MF 16-1/2" DRILL PRESS. HPB-30-S - JET JWBS-18 18" BANDSAW; POWERMATIC OLDER 30-B & 33-B BELT AND DISC SANDERS WITHOUT DUST COLLECTORS. HRS-2158 - DELTA® 40-650 18" THREE LEG SCROLL SAW; DEWALT® 20" DW-788 THREE LEG SCROLL SAW. HSB-2665 - DELTA® 31-250 18" X 36" DRUM SANDER. HDS-210 - DELTA® 31-280 6" BELT/12" DISC SANDER. HRS-10-G - DELTA® UNISAW® WITH 50" EXTENSION FENCE; JET JTAS-10 TABLESAW WITH 52" FENCE; GRIZZLY® G-1023 TABLESAW WITH 50" EXTENSION FENCE. HRLB-8 - DELTA® 8" LONG BED JOINTER (OLD STYLE). HRJ-8 - DELTA® 37-350 8" JOINTER. HRL-16 - DELTA® DL-40 ELECTRONIC LATHE. HRL-700 - DELTA® 46-705 LATHE; JET JWL-1236 LATHE. HRS-8 - DELTA® 36-755 10" CABINET SAW WITH 25" FENCE; BRIDGEWOOD® BW-310SL SHAPER. HRLS-5 - DELTA® 28-280 14" BANDSAW. LIFETIME MANUFACTURER'S WARRANTY. USA. LOCATE MOBILE BASES FOR WOODTEK® PRODUCTS BY ENTERING THE MACHINE'S SIX DIGIT PRODUCT NUMBER INTO THE WOODWORKER.COM WIZARD QUERY® SEARCH BOX.
|
|
|
|
Machinery Accessories - Table Saws
|
MERLIN TABLE SAW SPLITTER INSTALLS OR REMOVES IN SECONDS
|
| Merlin Spltr -jet/general Contr Rt
...plus other(s)
|
THE MTK SERIES MERLIN TABLE SAW SPLITTER ADDS SAFETY AND CONVENIENCE AND CAN BE INSTALLED OR REMOVED WITHOUT TOOLS IN A MATTER OF SECONDS:
INCLUDES 0.075" THICK SPLITTER BLADE SUITABLE FOR THIN AND REGULAR KERF SAWBLADES, REAR MOUNT ASSEMBLY AND UNIVERSAL RECEIVER, WHICH FITS INSIDE SAW THROAT USING EXISTING HOLES FROM FACTORY-SUPPLIED SPLITTER ASSEMBLY. ADJUSTABLE UP AND DOWN AND SIDE TO SIDE FOR PERFECT ALIGNMENT. ANTI-KICKBACK PROTECTION PROVIDED BY FOUR SHARPENED PIVOTING PAWLS THAT ACT ON THIN AND THICK MATERIAL ALIKE.
MTK120 - DELTA® 10" UNISAW® (RIGHT TILT) AND JET® XACTA TAS-10 (RIGHT TILT). MTK121 - DELTA® 10 UNISAW® (LEFT TILT) AND JET® XACTA (LEFT TILT). MTK130 - DELTA® CONTRACTOR'S SAW® (RIGHT TILT). MTK140 - GENERAL® 350 (RIGHT TILT). MTK150 - GENERAL® 10" CONTRACTOR 50-175 (RIGHT TILT) AND JET® CONTRACTOR JWTS. MTK200 - POWERMATIC® MODEL 66 (LEFT TILT). MTK220 - SEARS® 10" MODEL 113299120C (RIGHT TILT).
|
|
|
|
Machinery Accessories - Table Saws
|
PRODUCTION-GRADE 5HP JET® 12" RIGHT TILTING ARBOR TABLE SAW INCLUDES EXTENSION TABLE AND SUPPORT LEGS
|
| Dado Insert For Jet 12" Saw
...plus other(s)
|
|
12" XACTA SAW 1PH, STACK DADO & INSERT DADO INSERT FOR JET 12" SAW 10" CARBIDE STACK DADO 1" ARBOR
|
|
|
|
Machinery - Band Saws
|
JET® 14" BAND SAWS
|
| 14" Band Saw, Closed Stand, 1hp
...plus other(s)
|
WITH ALL OF ITS FEATURES, THE JET® JWBS-14CS (708115K) 14" CLOSED STAND WOODWORKING BAND SAW WILL BE A WELCOME ADDITION TO YOUR SHOP:
1HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. MICRO ADJUSTABLE BLADE GUIDE WITH GRAPHITE IMPREGNATED JET BLOCKS™ FOR SMOOTHER RUNNING. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 15" X 15" CAST IRON TABLE TILTS 45°R AND 10°L. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. SIMILAR JWBS-14MW (708116K) 14" CLOSED STAND METALWORKING BAND SAW FEATURES THREE SPEEDS (735, 1,470, 2,350 SFPM) FOR NON-FERROUS METAL AND WOODWORKING APPLICATIONS. 68"H X 26"W X 19"D. 185 LBS. NET WEIGHT; 200 LBS. SHIPPING WEIGHT. JWBS-14OS (708113A) 14" OPEN STAND WOODWORKING BAND SAW FEATURES: 3/4HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 14" X 14" CAST IRON TABLE TILTS 45°R AND 15°L. 16GA STEEL STAND - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. 68"H X 24"W X 26-1/2"D. 172 LBS. NET WEIGHT; 187 LBS. SHIPPING WEIGHT.
5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
FROM GENERAL CUTTING TO RESAWING, JET® 16", 18" AND 20" WOODWORKING BAND SAWS CAN HANDLE IT ALL
|
| Jwbs-16b 16" Band Saw 1-1/2hp 1ph
...plus other(s)
|
JET® PROFESSIONAL WOODWORKING BAND SAWS FEATURE TRIANGULAR COLUMN AND STEEL STANDS FOR ROCK SOLID STABILITY:
BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. CAST IRON TABLES TILT 45°R AND 10°L. PUSH BUTTON, MECHANICAL ON/OFF SWITCH (JWBS-18X-3 AND JWBS-20 HAVE MAGNETIC SWITCHES).
JWBS-16B 16" BAND SAW 708749B: 1-1/2HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 10" DEPTH RESAW CAPACITY; 16-3/8" WIDE CUTTING CAPACITY. 17" X 17" TABLE. 123" SAWBLADE. 71"H X 22"W X 30-3/4"D. 310 LBS. NET WEIGHT; 345 LBS. SHIPPING WEIGHT.
JWBS-18QT 18" BAND SAW 710750B: 1-3/4HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 410 LBS. NET WEIGHT; 450 LBS. SHIPPING WEIGHT.
JWBS-18QT-3 18" BAND SAW 710751B: 3HP, 1PH, 230V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 460 LBS. SHIPPING WEIGHT.
JWBS-20QT-3 20" BAND SAW 708754B: 3HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
JWBS-20QT-5 20" BAND SAW 708755B: 5HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT AND MITER GAUGE (JWBS-16 EXCLUDED), 4TPI 3/4" WIDE SAWBLADE, 4" DUST PORT, FOOT BRAKE (JWBS-20 ONLY) AND INSTRUCTIONS INCLUDED. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
IT'S TOUGH TO MATCH THE JET® 18" WOODWORKING BANDSAW FOR FEATURES, QUALITY AND PRICE
|
| Jwbs-18qt 18" Band Saw 1-3/4hp 1ph
|
ONE OF THE MOST POPULAR JET® BANDSAWS, THE JWBS-18 18" WOODWORKING BANDSAW HAS EVERYTHING NEEDED TO RUN RIGHT OUT OF THE BOX:
1-1/2HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 10-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 133" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D; 320 LBS. NET WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 20" WOODWORKING BANDSAW IS POWERED BY A 2HP INDUSTRIAL STRENGTH MOTOR
|
| Jwbs-20qt-3 20" Band Saw 3hp 1ph
|
A TRUE CUTTING AND RESAWING WORKHORSE, THE JET® JWBS-20 20" WOODWORKING BANDSAW COMES WITH ALL OF THE FEATURES EXPECTED BY PROFESSIONAL OR SERIOUS AMATEUR WOODWORKERS - EVEN A FOOT BRAKE AS STANDARD EQUIPMENT:
2HP, 230V, 1PH TEFC MOTOR - 3,450 SFPM. PUSH BUTTON, MAGNETIC ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 20" FRAME TO BLADE CLEARANCE. 21" X 21" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 150" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 75"H X 22"W X 30-3/4"D; 500 LBS. NET WEIGHT. LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 18" WOODWORKING BANDSAW WITH ROLLER GUIDES
|
| Jwbs-18qt-3 18" Band Saw 3hp 1ph
|
THE JET® JWBS-18X-3 18" WOODWORKING BANDSAW HAS BIG-MACHINE CAPACITY WITH A FOOTPRINT SLIGHTLY LARGER THAN A 14" MACHINE:
3HP, 230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 137" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 435 LBS. SHIPPING WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
JET® 15" BENCHTOP OR FLOOR MOUNT DRILL PRESS - IT'S YOUR CHOICE
|
| 15" Benchtop Drill Press 16-spd
...plus other(s)
|
WHETHER YOU SELECT THE BENCHTOP OR THE FLOOR MODEL, THE JET® 15" VARIABLE SPEED DRILL PRESS IS A FULLY FUNCTIONING, HEAVY DUTY MACHINE WITH 16 SPEEDS RANGING FROM 200 TO 3,630 RPM:
3/4HP, 115/230V, 1PH MOTOR - 5/8" CHUCK, 3-1/8" SPINDLE TRAVEL, MT-2/JT-33 SPINDLE TAPER. UPFRONT, MECHANICAL PUSH BUTTON ON/OFF SWITCH. 2-7/8" DIA. COLUMN - DEPTH STOP DISPLAYS INCH/MM AND FEATURES QUICK SET BOLT. ROTATING, ±45° 13" X 16" CRANK OPERATED TABLE HAS "X" PATTERN MOUNTING GROOVES. BUILT IN WORKLIGHT (BULB NOT INCLUDED), CHUCK KEY AND INSTRUCTIONS INCLUDED. 39-1/2"H X 13"W X 31"D (BENCHTOP MODEL). 150 LBS. NET WEIGHT; 163 LBS. SHIPPING WEIGHT. 63"H X 13"W X 31"D (FLOOR MODEL). 180 LBS. NET WEIGHT; 193 LBS. SHIPPING WEIGHT. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
JET® 16-1/2" FLOOR MOUNT DRILL PRESS HAS PRODUCTION FACILITY CAPABILITIES
|
| 16-1/2" Drill Press 16-spd, 3/4hp
...plus other(s)
|
WITH 16 SPEEDS RANGING FROM 200 TO 3,630 RPM, THE JET® JDP-17MF 16-1/2" DRILL PRESS CAN BE COUNTED UPON FOR CONSISTENT PERFORMANCE UNDER CONTINUING WORKLOADS:
3/4HP, 1PH, 115/230V MOTOR - 5/8" CHUCK, 4-3/8" SPINDLE TRAVEL, MT-2 SPINDLE TAPER. UPFRONT, MECHANICAL PUSH BUTTON ON/OFF SWITCH. 3-1/8" DIA. COLUMN - 1/2" DIA. POSITIVE DEPTH STOP WITH DUAL LOCKING NUT. ROTATING ±45° 13-3/4" DIA. CRANK OPERATED TABLE WITH QUICK RELEASE CLAMP. BUILT IN WORKLIGHT (BULB NOT INCLUDED), CHUCK KEY AND INSTRUCTIONS INCLUDED. 66" HIGH W/11-1/8" X 19-5/8" BASE. 178 LBS. NET WEIGHT; 191 LBS. SHIPPING WEIGHT. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
JET® 16" PLANER IS A GREAT VALUE PLUS AN EXTRA INCH WIDER
|
| 16"os Planer 3hp/1ph/230v
...plus other(s)
|
|
HEAVY DUTY CAST IRON AND STEEL CONSTRUCTION. 2 SPEED GEAR BOX WITH AUTOMATIC CHAIN TENSIONER. PRECISION GROUND CAST IRON BED WITH ADJUSTABLE BED ROLLERS. 3 HP TEFC WITH 3 V BELT POWER TRANSMISSION. INFEED AND OUTFEED BED EXTENSIONS WITH 3 ROLLERS ANGLED 4" CHIP CHUTE KEEPS DUST HOSE OUT OF WAY. MAGNETIC SWITCH FOR POWER INTERRUPTION SHUT DOWN. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
JET® 12" PLANER-JOINTER COMBO IDEAL FOR SHOPS WITH LIMITED FLOOR SPACE
|
| Jjp-12 Jointer Planer Combo Mach
...plus other(s)
|
FEATURING QUICK CHANGE OVER BETWEEN OPERATIONS, THE JET® JJP-12 12" PLANER-JOINTER COMBO MACHINE ALLOWS JOINTING AND PLANING BOARDS OF THE SAME WIDTH:
3HP, 230V, 1PH, 16A TEFC MOTOR - V-BELT TRANSMISSION FOR SMOOTH AND CONSISTENT POWER. JOINTER CUTTING CAPACITY: 1/8" X 12"; PLANER: 5/32" X 12". 5,500 RPM CUTTERHEAD SPEED; 16,500 CPM - 2-3/4" DIA. HSS THREE-KNIFE CUTTERHEAD. JACK SCREW KNIFE ADJUSTMENT. 12" X 55" CAST IRON TABLE AND 6" X 43" FENCE; FENCE TILTS 90°-45°R. FULLY ADJUSTABLE INFEED AND OUTFEED BEDS. 4" DIA. DUST PORT - MINIMUM 400 CFM REQUIRED. 500 LBS. NET WEIGHT; 525 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Lathes
|
JET® MINI LATHES
|
| Jml-1014 Mini Lathe, 6-spd, 1/2hp
...plus other(s)
|
THE JET® MINI LATHES ARE MADE OF HEAVY DUTY CAST IRON WITH NON-SKID RUBBER FEET. THESE LATHES ARE AVAILABLE IN SIX-SPEED AND VARIABLE SPEED MODELS WITH A SPEED RANGE BETWEEN 500 AND 3900 RPM. THE HEADSTOCK HAS 1"-8TPI SPINDLE THREADS WITH 24-POINT INDEXING AND A SECURE SPINDLE LOCK. THE TAILSTOCK IS SELF-EJECTING WITH A 3/8" THROUGH HOLE. AN OPTIONAL 28" BED EXTENSION INCREASES THE BETWEEN CENTERS CAPACITY TO 42" AND AN OPTIONAL ADJUSTABLE FLOOR STAND FITS BOTH MODELS:
INCLUDES 6" TOOL REST, 3" FACEPLATE, SPUR CENTER, LIVE CENTER, KNOCKOUT ROD, SAFETY GOGGLES AND INSTRUCTION MANUAL. NET WEIGHT - 72 LBS, SHIPPING WEIGHT - 80 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
JET® JML-1014 MINI LATHE. 1/2 HP, 115VAC, 5A, 1PH MOTOR. SIX SPEEDS: 500, 840, 1240, 1800, 2630, 3975 RPM.
JET® JML-1014VS MINI LATHE. 1/2 HP, 115VAC, 5A, 1PH MOTOR. VARIABLE SPEEDS FROM 500 TO 3900 RPM.
SPECIFICATIONS:
SWING OVER BED - 10" (7-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 14". HEADSTOCK SHAFT: 1"-8TPI THREADS, #2MT, 3/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS: 14-1/8"H, 28-1/8"W, 10-1/4"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. CARBON STEEL TURNING TOOLS - 873-826. SORBY LIVE CENTER SYSTEM - 137-177. ONEWAY TALON CHUCK - 959-627. NOVA G3 CHUCK - 962-546. VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Advanced Search Tools
Browse
will
