|
|
|
Bits Drill And Boring - Accessories
|
ACCURATELY POSITION BLUM® ADAPTER PLATES FOR FACE FRAME HINGES
|
| Platemate Boring Template
...plus other(s)
|
THE BLUM® PLATEMATE™ JIG CLAMPS TO FACE FRAMES USING LEVER ACTION TO ACCURATELY POSITION ADAPTER PLATES:
ADJUSTMENT KNOB ALLOWS ACCURATE BORING IN FRAMES FROM 5/8" TO 1" THICK. SPACER SCREWS ALLOW FOR QUICK USE WITHOUT MEASURING FOR EACH PLATE. INCLUDES 2.5MM PILOT BIT AND EXTENSION, 5MM STOP COLLAR, REVERSING BUSHING SET FOR 32MM OR 40MM HOLE SPACING. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM UNIVERSAL INDIVIDUAL TEMPLATE MAKES CABINET HARDWARE SETUP SIMPLE AND ACCURATE
|
| Universal Individual Template
|
THE UNIVERSAL INDIVIDUAL TEMPLATE™ ALLOWS YOU TO USE YOUR CORDED OR CORDLESS DRILL TO ACCURATELY MARK AND BORE MOUNTING HOLES FOR A WIDE VARIETY OF FONT COLOR=#FF9900>BLUM® CABINET HARDWARE.
EASILY ADJUSTS AND LOCKS TO GIVE PROPER SETBACK FOR AVENTOS™ LOCATING PINS, TANDEM™ AND TANDEMBOX™ RUNNERS, HINGE MOUNTING PLATES AND BLUMOTION™ AND TIP-ON™ ADAPTER PLATES. SET INCLUDES UNIVERSAL INDIVIDUAL TEMPLATE, 2.5MM AND 5MM STOP COLLARS FOR TWIST BITS (BITS NOT INCLUDED). AUSTRIA
|
|
|
|
Bits Router/straight/hinge Mortising
|
IMPROVED PORTER-CABLE® DOOR HINGE TEMPLATE LETS YOU ROUT BOTH DOOR AND DOOR FRAME HINGES
|
| Carbide Bit For 59370 & 59375 Templates
...plus other(s)
|
THE PORTER-CABLE® 59370 DOOR HINGE TEMPLATE AND YOUR ROUTER MAKE INSTALLATIONS FASTER AND EASIER BY ACCOMMODATING FIVE DOOR THICKNESSES AND EIGHT HINGE SIZES:
THICKNESSES INCLUDE 1-3/8", 1-3/4", 2", 2-1/4" AND 2-1/2". HINGES RANGE FROM 2-1/2" TO 6" INCLUSIVE, IN 1/2" INCREMENTS. TWO, QUICK ADJUST RATCHETING ROUTER BIT GUIDES HANDLE 1/4", 5/8" RADIUS AND SQUARE CORNER HINGES (CORNER CHISEL REQUIRED - NOT INCLUDED). COMPLEMENTARY STRIKE AND LATCH TEMPLATE 59375 (SOLD SEPARATELY) HAS A DOUBLE WINDOW DESIGN AND THREE ADJUSTABLE INSERTS TO HANDLE 1" AND 1-1/8" LATCH PLATE WIDTHS AND 2-1/4" AND 2-3/4" STRIKE PLATE SIZES - TEMPLATE CENTER MARKS ENABLE QUICK AND SIMPLE ALIGNMENT. EACH TEMPLATE COMES WITH FOUR POSITIVE PLACEMENT LOCK-IN PINS, TWO DOUBLE HEADED NAILS, HSS BEARING GUIDED ROUTER BIT, INSTRUCTION MANUAL AND QUICK REFERENCE INSTRUCTION CARD. LOCK-IN PINS ENABLE QUICK AND SECURE PLACEMENT OF TEMPLATE ONTO DOOR OR JAMB. EXTENDED TEMPLATE PLATFORM PROVIDES ADDED STABILITY FOR YOUR ROUTER. DOUBLE HEADED NAILS ENSURE EASY REMOVAL FROM DOOR AND FRAME. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Fasteners - Knock Down (kd)
|
HEAVY DUTY COUNTERTOP CONNECTORS ARE SUPER FAST AND SUPER STRONG
|
| Flipbolt Countertop Connector
...plus other(s)
|
ZINC PLATED, HIGH CARBON STEEL FLIPBOLT CONNECTORS (PATENT PENDING) ARE FAST AND EASY TO USE AND REQUIRE NO TOOLS FOR MOST COUNTERTOP INSTALLATIONS:
SIMPLY HAND TIGHTEN ENCLOSED NUT ON ONE END, THEN LOWER FLIP LEVER ON THE OTHER END TO SECURELY LOCK IN PLACE. 3-1/2" LONG BOLT IS THREADED ABOUT 3/4 OF ITS LENGTH; CROSSPIECES ARE EACH 1" WIDE. ROUTER TEMPLATE MAKES INSTALLATION SIMPLE. USE A 1/2" DIAMETER TOP BEARING HINGE MORTISING BIT OR A 1/2" DIAMETER BIT WITH A TEMPLATE GUIDE. SOLD INDIVIDUALLY.
|
|
|
|
Hardware Hinges - Accessories
|
BRUSSO® HINGE ROUTING JIGS TAKE THE HAZARD OUT OF HINGING BOX LIDS
|
| Template For 811-418 Hinge
...plus other(s)
|
HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES. IF YOU MAKE A LOT OF BOXES, USE TWO FOR TIME SAVINGS AND BETTER ACCURACY:
105-170 - JIG FITS 936-134 & 811-418 HINGES. 105-173 - JIG FITS 811-419 & 105-164 HINGES. 105-179 - JIG FITS 936-141 & 811-425 HINGES. 105-182 - JIG FITS 105-830 HINGES. 116-468 - TEMPLATE FITS 936-148 & 811-428 HINGES.
COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED).
USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Home Improvement - Outdoor Living
|
ONLY A FEW OF THESE 8' DELUXE BARN HARDWARE PACKS REMAIN
|
| Hdwr.kit-8' Barn
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
THE 8' DELUXE BARN HARDWARE PACK WAS ORIGINALLY AN OPTIONAL ITEM FOR FULL SIZE 8' DELUXE BARN TEMPLATES, WHICH SHOWED HOW TO BUILD A STORAGE BARN WITH DOOR. WOODWORKER'S SUPPLY® NO LONGER CARRIES THE TEMPLATES, BUT WE DO HAVE A FEW OF THE HARDWARE PACKS IN INVENTORY:
KITS INCLUDE METAL FRAMING BRACKETS AND FASTENERS BUT DO NOT INCLUDE TEMPLATES, DIRECTIONS OR DECORATIVE HARDWARE SUCH AS HASPS AND HINGES. LIMITED TO QUANTITIES ON HAND
|
|
|
|
Kits
|
ONLY A FEW OF THESE 12' DELUXE BARN HARDWARE PACKS REMAIN
|
| Hdwr.kit-12' Barn
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
THE 12' DELUXE BARN HARDWARE PACK WAS ORIGINALLY AN OPTIONAL ITEM FOR FULL SIZE 12' DELUXE BARN TEMPLATES, WHICH SHOWED HOW TO BUILD A 12' X 10' X 8' STORAGE BARN WITH 6' X 8' DOOR. WOODWORKER'S SUPPLY® NO LONGER CARRIES THE TEMPLATES, BUT WE DO HAVE A FEW OF THE HARDWARE PACKS IN INVENTORY:
KITS INCLUDE METAL FRAMING BRACKETS AND FASTENERS BUT DO NOT INCLUDE TEMPLATES, DIRECTIONS OR DECORATIVE HARDWARE SUCH AS HASPS AND HINGES. LIMITED TO QUANTITIES ON HAND
|
|
|
|
Portable Power Tool Accessories - Drills
|
ONE INNOVATIVE TEMPLATE HANDLES BASEPLATE LAYOUTS FOR 95% OF ALL EURO HINGES
|
| Ez-template Base Plate Jig
|
DESIGNED FOR FACE FRAME AND FRAMELESS HINGES, THE WOODWORKER'S SUPPLY® UNIVERSAL BASEPLATE MOUNTING TEMPLATE EASILY ACCOMMODATES AMEROCK®, BLUM®, GRASS, LAMA, MEPLA-ALFIT, RUCA, SALICE, WOODTEK® AND MANY OTHER CONCEALED HINGE INSTALLATIONS:
JUST MATCH PRE-DRILLED TEMPLATE PILOT HOLES TO BASEPLATE, MARK LOCATIONS ONTO CABINET USING AN AWL OR PENCIL AND DRILL AT MARKED LOCATIONS. CAN BE MODIFIED FOR USE AS A JIG WITH A SELF-CENTERING DRILL BIT. ENLARGE PILOT HOLES TO MATCH THE MOUNTING PATTERN OF THE HINGE BEING INSTALLED OR DRILL ADDITIONAL HOLES FOR CUSTOMIZED APPLICATIONS (DRILL BIT NOT INCLUDED). CENTER LINE, SCRIBE MARKS AND MEASUREMENTS ARE LASER-ETCHED INTO DURABLE 1/8" X 2-3/4" X 4" ACRYLIC TEMPLATE. COMPLETE INSTRUCTIONS, HARDWARE AND WOOD HANDLE INCLUDED. FORGET ABOUT MEASURING AND FLIMSY PAPER TEMPLATES WHILE AVOIDING COSTLY DRILLING MISTAKES! USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SELF-CENTERING DRILL BITS
|
|
|
|
Portable Power Tool Accessories - Jigs And Fixtures
|
FASTER, MORE ACCURATE CABINET HINGE PLATE INSTALLATIONS - WITHOUT MEASURING!
|
| Scp-0105 Hinge Plate Jig
|
DESIGNED FOR SALICE® CAST AND STAMPED STEEL HINGE PLATES, THE EZ-MOUNT SCP-0105 HINGE PLATE JIG AND DOOR HINGE CENTERING GUIDE LETS YOU INSTALL CABINET HINGE PLATES MUCH MORE QUICKLY, WITHOUT TIME-CONSUMING MEASUREMENTS OR FLIMSY PAPER TEMPLATES:
SIMPLY PRESS YOUR MODEL BAR3R09, BAR3R69, BAV3L09F OR BAV3L69F HINGE PLATE INTO THE DURABLE ABS PLASTIC JIG. USING THE BUILT-IN HANDGRIP, ALIGN THE JIG WITH THE CABINET TOP OR BOTTOM. THEN, DRILL MOUNTING HOLES USING THE HINGE PLATE AS A GUIDE, SCREW HINGE PLATE INTO PLACE AND REMOVE JIG FROM INSTALLED HARDWARE. DIRECTIONS FOR ALIGNING AND BORING CABINET DOOR HINGE MOUNTING HOLES INCLUDED (BORING MACHINE OR REGULAR DRILL PRESS REQUIRED). COMES WITH ONE OVERLAY DOOR JIG, ONE INSET DOOR JIG AND INSTRUCTIONS. USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
EASILY AND ACCURATELY INSTALL DOOR HINGES USING YOUR ROUTER AND THE PORTER-CABLE® HINGE BUTT TEMPLATE KIT
|
| Hinge Butt Template Kit
...plus other(s)
|
THE PORTER-CABLE® MODEL 59381 HINGE BUTT TEMPLATE KIT IS EASY TO USE AND PERMITS MORTISING DOORS AND JAMBS FROM 78" TO 84" LONG AND ENSURES PERFECTS MATCHING OF HINGE LOCATIONS:
FEATURES INCLUDE SPRING LOADED NAILS, THAT STAY UP PRIOR TO DRIVING, AND CAN BE REMOVED WITH CLAW HAMMER; THICKNESS PINS TO MOUNT DOORS TO JAMB WITHOUT JAMB STOPS; END GAUGES FOR EACH END OF THE TEMPLATE; AND A FULL LENGTH LOCATOR WITH EACH TEMPLATE SECTION. INCLUDES TEMPLATES FOR 6'6", 6'8" AND 7'0" JAMBS AND DOORS; A HINGE TEMPLATE CAN BE ADJUSTED FOR CUTTING 3" TO 6" MORTISES FOR COMMON HINGE SIZES. ALSO INCLUDES 1/2" DIA. MORTISING BIT, TEMPLATE GUIDE, LOCK NUT, CARRYING CASE AND INSTRUCTION MANUAL. 878-955 - MODEL 517 LOCK FACE TEMPLATE IS USED TO QUICKLY ROUT LOCK FACES INTO DOORS AFTER THE BOX LOCK MORTISE HAS BEEN COMPLETED; AUTOMATICALLY SELF CENTERING AND SELF BEVELING.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
IMPROVED PORTER-CABLE® DOOR HINGE TEMPLATE LETS YOU ROUT BOTH DOOR AND DOOR FRAME HINGES
|
| Passage Door Hinge Template W/hss Bit
...plus other(s)
|
THE PORTER-CABLE® 59370 DOOR HINGE TEMPLATE AND YOUR ROUTER MAKE INSTALLATIONS FASTER AND EASIER BY ACCOMMODATING FIVE DOOR THICKNESSES AND EIGHT HINGE SIZES:
THICKNESSES INCLUDE 1-3/8", 1-3/4", 2", 2-1/4" AND 2-1/2". HINGES RANGE FROM 2-1/2" TO 6" INCLUSIVE, IN 1/2" INCREMENTS. TWO, QUICK ADJUST RATCHETING ROUTER BIT GUIDES HANDLE 1/4", 5/8" RADIUS AND SQUARE CORNER HINGES (CORNER CHISEL REQUIRED - NOT INCLUDED). COMPLEMENTARY STRIKE AND LATCH TEMPLATE 59375 (SOLD SEPARATELY) HAS A DOUBLE WINDOW DESIGN AND THREE ADJUSTABLE INSERTS TO HANDLE 1" AND 1-1/8" LATCH PLATE WIDTHS AND 2-1/4" AND 2-3/4" STRIKE PLATE SIZES - TEMPLATE CENTER MARKS ENABLE QUICK AND SIMPLE ALIGNMENT. EACH TEMPLATE COMES WITH FOUR POSITIVE PLACEMENT LOCK-IN PINS, TWO DOUBLE HEADED NAILS, HSS BEARING GUIDED ROUTER BIT, INSTRUCTION MANUAL AND QUICK REFERENCE INSTRUCTION CARD. LOCK-IN PINS ENABLE QUICK AND SECURE PLACEMENT OF TEMPLATE ONTO DOOR OR JAMB. EXTENDED TEMPLATE PLATFORM PROVIDES ADDED STABILITY FOR YOUR ROUTER. DOUBLE HEADED NAILS ENSURE EASY REMOVAL FROM DOOR AND FRAME. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
TOOL FREE GUIDE BUSHINGS FOR BOSCH MODEL 1613, 1614, 1617, 1618 OR 1619 ROUTERS
|
| 1/4" Radius Hinge Template Guide
...plus other(s)
|
TOOL FREE, BOSCH ROUTER GUIDE BUSHINGS SNAP IN AND OUT FOR QUICK, EASY ROUTING:
888-029 - SET OF 4 TEMPLATE GUIDE BUSHINGS (SMALL DOVETAIL, 1/4" AND 5/8" RADIUS HINGE, 3/8" GENERAL APPLICATION). 932-299 - THREADED TEMPLATE GUIDE BUSHING ADAPTER ALLOWS USE OF PORTER-CABLE®, BLACK & DECKER® OR SIMILAR BUSHINGS. ROUTER SUB-BASE ALIGNMENT KIT FOR TEMPLATE GUIDE BUSHINGS. USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
SET - BOSCH GUIDE BUSHING SET
|
| Set - Bosch Guide Bushing Set
...plus other(s)
|
COMBINE THE LEIGH D4R-24 DOVETAIL JIG WITH YOUR FAVORITE 1/2" OR 8MM COLLET ROUTER AND YOU CAN EASILY PRODUCE LARGE AND SMALL THROUGH, ANGLED THROUGH, HALF BLIND, RABBETED HALF BLIND, END-ON-END AND SLIDING DOVETAIL JOINTS:
JIG CAN ACCOMMODATE BOARDS UP TO 24" WIDE X 1-1/2" THICK WITH INFINITE PIN, TAIL WIDTH AND SPACING ADJUSTMENTS FOR A CLASSIC HAND CUT LOOK. INCLUDES 1/2" DIA. 8° DOVETAIL, 5/16" DIA. STRAIGHT AND 1/2" DIA. 14° DOVETAIL BITS (8MM SHANKS), 7/16" O.D. UNIVERSAL GUIDE BUSHING, 1/2"-TO-8MM COLLET REDUCER, USER GUIDE, INSTRUCTIONAL DVD, CAM-ACTION SPEED CLAMPS, CROSSCUT/SLIDING DOVETAIL GUIDE BAR, SQUARE DRIVER AND ASSEMBLY WRENCH. REQUIRES 7/16" AND 5/8" BUSHINGS (NOT INCLUDED).
M2 LEIGH MULTIPLE MORTISE AND TENON ATTACHMENT ATTACHES DIRECTLY TO THE D4R-24 AND REPLACES DOVETAILING FINGERS SO YOU CAN CUT PERFECT MULTIPLE MORTISE AND TENON JOINTS FROM 5/16" X 5/8" TO 1-1/2" X 2-1/2": CUSTOMIZE THE FIT AND DESIGN TO SUIT YOUR REQUIREMENTS AND SELECT FROM THREE CORNER RADII (5/32", 1/4" OR SQUARE (WITH CHISELING). 1/2" HSS SPIRAL UPCUT BIT AND INSTRUCTIONS INCLUDED.
ISOLOC TEMPLATES ARE PRECISION CNC-MACHINED ALUMINUM ALLOY AND COME WITH AN INSTRUCTION MANUAL AND PATENTED 5-PIECE VGS VARIABLE TEMPLATE GUIDEBUSH SYSTEM WITH NOMINAL 1/2" OD GUIDE.
AC-D24 ROUTER BIT AND VACUUM ATTACHMENT ACCESSORY KIT AND THE VRS-D24 VACUUM AND ROUTER SUPPORT PROVIDE CONVENIENCE AND VERSATILITY.
FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
MAXIMIZE THE VERSATILITY OF YOUR ROUTER WITH DEWALT® TEMPLATE GUIDES
|
| 5/16" Od Template Guide Bushing
...plus other(s)
|
TEMPLATE GUIDES FIT ALL PORTER-CABLE®, ROCKWELL®, MOST BLACK & DECKER®, SKIL®, MILWAUKEE® AND OTHER ROUTERS BY USING ADAPTERS:
DW6980 - 1/4" DOVETAILING. DW6981 - 1/2" DOVETAILING AND GENERAL ROUTING. DW6982 - FOR USE WITH STANLEY T-3 TEMPLATE. DW6983 - GENERAL ROUTING. DW6984 - GENERAL ROUTING. DW6985 - GENERAL ROUTING. DW6986 - LOCK FACE ROUTING. DW6987 - HINGE BUTT ROUTING. 42237 - LOCK NUT FOR ALL TEMPLATE GUIDES. RA1110 - BOSCH STANDARD ROUTER ADAPTER. RA1100 - BOSCH 1617 ROUTER ADAPTER.
ROUTER SUB-BASE ALIGNMENT KIT FOR TEMPLATE GUIDE BUSHINGS. ONE YEAR MANUFACTURER'S WARRANTY. USA. NOTE: DIMENSION "D" REFERS TO THE TEMPLATE GUIDE "DISTANCE PAST BASE."
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.