|
|
|
Bits Drill And Boring - Accessories
|
BLUM® CABINET PROFILE DRILLING TEMPLATE ACCURATELY LOCATES HARDWARE WITHOUT AN EXPENSIVE BORING MACHINE
|
| Cabinet Profile Drilling Jig
|
|
THE 1 METER LONG RAIL OF THE BLUM® CABINET PROFILE DRILLING TEMPLATE CLAMPS DIRECTLY TO THE CABINET SIDE. FOUR TEMPLATES CAN BE ADJUSTED ALONG THE LENGTH OF THE RAIL TO ACCURATELY LOCATE HOLES FOR TANDEM™ DRAWER SLIDES, AVENTOS™ LIFT SYSTEMS LOCATING PINS AND HINGE MOUNTING BASEPLATES. GUIDE CAN BE MOVED FROM LEFT TO RIGHT SIDE OF CABINET WITHOUT CHANGING SETUPS TO ASSURE UNIFORMITY IN BORING.
|
|
|
|
Fasteners - Knock Down (kd)
|
HEAVY DUTY COUNTERTOP CONNECTORS ARE SUPER FAST AND SUPER STRONG
|
| Flipbolt Countertop Connector
...plus other(s)
|
ZINC PLATED, HIGH CARBON STEEL FLIPBOLT CONNECTORS (PATENT PENDING) ARE FAST AND EASY TO USE AND REQUIRE NO TOOLS FOR MOST COUNTERTOP INSTALLATIONS:
SIMPLY HAND TIGHTEN ENCLOSED NUT ON ONE END, THEN LOWER FLIP LEVER ON THE OTHER END TO SECURELY LOCK IN PLACE. 3-1/2" LONG BOLT IS THREADED ABOUT 3/4 OF ITS LENGTH; CROSSPIECES ARE EACH 1" WIDE. ROUTER TEMPLATE MAKES INSTALLATION SIMPLE. USE A 1/2" DIAMETER TOP BEARING HINGE MORTISING BIT OR A 1/2" DIAMETER BIT WITH A TEMPLATE GUIDE. SOLD INDIVIDUALLY.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
KV8092 4X4 POCKET DOOR™ SLIDES HANDLE LARGE OR HEAVY DOORS
|
| 18" 8092 Pocket Door Slide
...plus other(s)
|
PERFECT FOR LARGE ENTERTAINMENT AND HOME THEATER CABINETS, KNAPE & VOGT® KV8092 4X4 POCKET DOOR™ SLIDES HAVE BEEN SPECIFICALLY DESIGNED TO HOLD DOORS UP TO 75 LBS. AND UP TO 72"H X 26"W. MORE IMPORTANTLY, SLIDE INSTALLATION REQUIRES 44% LESS HARDWARE THAN COMPETING PRODUCTS:
SELF-CLOSING, THREE-WAY ADJUSTABLE ISOMETRIC DESIGN - EBONY FINISH. DUAL RACK-AND-PINION DESIGN ELIMINATES DOOR SAG. METAL BALL RETAINER HAS THREE BEARINGS PER INCH OF RACE FOR SMOOTH AND QUIET OPERATION. SLIDE TRACK INDEXING SYSTEM SPEEDS INSTALLATION. HINGE BASES PRE-MOUNTED FOR FASTER INSTALLATION. HINGE OPTIONS ALLOW STANDARD INSET APPLICATION ALONG WITH FREE SWING, PARTIAL OVERLAY, THICK DOOR AND EXTRA THICK DOOR APPLICATIONS.
EACH DOOR REQUIRES (SOLD SEPARATELY):
1 - 4X4 POCKET DOOR™ SLIDE PACK INCLUDING 2 SLIDES, 2 RACKS, DOOR ROLLER HARDWARE AND SHAFT HARDWARE. 1 - SHAFT TO BE CUT 2" SHORTER THAN DOOR HEIGHT. 2 - HINGE PACKS (ONE PAIR PER PACK).
INSTRUCTIONS DESCRIBE HOW TO DETERMINE HINGE HOLE CENTERS, POSITION SLIDE CHANNELS INSIDE CASE, PREPARE SHAFT AND GEAR ASSEMBLY, HANG DOOR AND ADJUST HINGES AND INSTALL GUIDE ROLLERS (NOT RECOMMENDED FOR RECEDING OR FLIPPER DOOR APPLICATIONS.)
8090PCR - CASSETTE ROLLER (SEE INSET) MOUNTS ONTO CABINET SIDE TO ALLOW RAISED PANEL DOORS TO CLEAR SLIDES WHEN CLOSING (REQUIRED TO SUPPORT RAISED PANEL DOORS; NOT REQUIRED WITH FLAT PANEL DOORS). MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA
|
|
|
|
Hardware Hinges - Accessories
|
BRUSSO® HINGE ROUTING JIGS TAKE THE HAZARD OUT OF HINGING BOX LIDS
|
| Template For 811-418 Hinge
...plus other(s)
|
HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES. IF YOU MAKE A LOT OF BOXES, USE TWO FOR TIME SAVINGS AND BETTER ACCURACY:
105-170 - JIG FITS 936-134 & 811-418 HINGES. 105-173 - JIG FITS 811-419 & 105-164 HINGES. 105-179 - JIG FITS 936-141 & 811-425 HINGES. 105-182 - JIG FITS 105-830 HINGES. 116-468 - TEMPLATE FITS 936-148 & 811-428 HINGES.
COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED).
USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Hinges - Butt
|
BRUSSO® BUTT HINGES FOR SMALL BOXES
|
| 3/4"l Spans 5/16" Stop Hinge
...plus other(s)
|
BRUSSO® BUTT HINGES ARE MILLED FROM SOLID BRASS AND FEATURE A FLAWLESS SATIN FINISH:
811-418 JB-101 FULL MORTISE BUTT HINGES - (3/4" LONG X 3/32" LEAF THICKNESS, SPANS 5/16" MATERIAL) HAVE BUILT-IN STOPS TO ALLOW LID TO REMAIN OPEN AT 95°. 811-425 JB-103 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" LEAF THICKNESS, SPAN 7/16" MATERIAL); OPERATION SIMILAR TO JB-101. 811-419 JB-102 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" LEAF THICKNESS, SPANS 5/16" MATERIAL); OPERATION SIMILAR TO JB-101. 105-830 JB-804 STOP HINGES - (1-1/4" X 1-1/32, 3/16 LEAF THICKNESS, 1/8" RADIUS CORNER) PROVIDE BUILT-IN STOPS, ALLOWING LID TO REMAIN OPEN AT ABOUT 95° - USE WHEN ADDITIONAL STAYS NOT DESIRED. MORTISE FLAT INTO BOX AND LID. 936-148 CB-407 BUTT HINGE (2 X 1-1/2, 3/32 LEAF THICKNESS) HINGE PINS ARE TOOL STEEL, FITTED TO PRECISION-REAMED BORES. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED)..
OPTIONAL HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES:
TJ-101 JIG - JB-101 HINGES. TJ-102 JIG - JB-102 HINGES. TJ-103 JIG - JB-103 HINGES. TJ-804 JIG - JB-804 HINGES. COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED). USA. 936-148 IS LIMITED TO QUANTITY ON HAND.
|
|
|
|
Hardware Hinges - Concealed
|
SOSS® INVISIBLE HINGES - BEAUTIFUL WHEN OPEN, INVISIBLE WHEN CLOSED
|
| 3/8"x1" Soss Hinge-sat. Brass
...plus other(s)
|
SAFETY AND SECURITY AS WELL AS A CLEAN, CONTEMPORARY LOOK ARE EASY WITH SOSS® INVISIBLE HINGES:
WHEN CLOSED, HINGES CANNOT BE SEEN OR TAMPERED WITH - WHEN OPEN, RIVETED PINS CANNOT BE REMOVED (HINGE OPENS TO 180°). HIGH-STRENGTH PLATED STEEL AND HEAVY-DUTY ZINC ALLOY CASTINGS. CHOOSE FROM SB-SATIN BRASS, SC-SATIN CHROME, EE-EBONY EPOXY FINISHES IN A NUMBER OF SIZES. TO INSTALL, MORTISE OUT WOOD DOOR AND JAMB USING A DRILL BIT AND CLEAN UP WITH A CHISEL (PAPER TEMPLATE, INSTRUCTIONS AND MOUNTING SCREWS INCLUDED). SMALLER HINGES SOLD IN CARDED PAIRS; 2-3/4 AND LARGER HINGES SOLD EACH. IMPORTED.
FOR FASTER AND MORE ACCURATE HINGE INSTALLATION, THE OPTIONAL SOSS® ROUTER GUIDE TEMPLATE ENSURES A PERFECT MORTISE:
INDIVIDUALLY HANDCRAFTED TEMPLATE FASTENS TO DOOR AND JAMB WITH NAILS - GUIDE PINS LOCATE THE DEEP MORTISE. ROUTER, ROUTER BIT AND 3/4" O.D. GUIDE BUSHING WITH LOCK NUT REQUIRED (NOT INCLUDED). 101 SERIES TEMPLATE - USE WITH 1/4" DIA BIT. 103 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 203 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 204 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 208 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 216 SERIES TEMPLATE - USE WITH 1/2" DIA BIT.
|
|
|
|
Machinery - Boring
|
KREG® SEMI-AUTOMATIC POCKET HOLE MACHINE...WHEN IT'S TIME TO MOVE UP
|
| Pneumatic Pocket Hole Machine
...plus other(s)
|
IF YOUR PRODUCTION NEEDS HAVE OUTPACED MANUAL JIGS, IT MIGHT BE TIME TO CONSIDER THE ADDED SPEED AND CONVENIENCE OF THE KREG® SEMI-AUTOMATIC FOREMAN:
DB55 PNEUMATIC FEATURES A 3/4HP PNEUMATIC MOTOR, AUTOMATIC AIR CLAMPING - 90-120 RECOMMENDED PSI; 5.3 CFM @ 90 PSI MINIMUM COMPRESSOR CAPACITY. DB110 ELECTRIC IS ENTIRELY ELECTRIC - NO COMPRESSED AIR REQUIRED. LEVER OPERATED - ONE-SECOND CYCLE TIME. 3/8" DIA. STEP BIT PRODUCES FLAT BOTTOM, ROUND SIDED POCKET HOLES SO SCREW HEADS SEAT FLUSH AND HOLES CAN BE PLUGGED. 1/2" TO 1-1/2" MATERIAL CAPACITY. STABLE WORK SURFACE HAS EASILY ADJUSTABLE "SWING-STOP" MATERIAL POSITIONING GUIDES. HINGED TOP ALLOWS EASY ACCESS TO DRILL BIT AND MOTOR. 6-3/4"H (19" INCLUDING HANDLE) X 13-5/8"W X 22-5/8"D. 35 LBS. NET WEIGHT; 40 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. USA
|
|
|
|
Plans - Home Furniture
|
DETAILED PLANS AND HARDWARE LET YOU FURNISH YOUR HOME OFFICE A STEP AT A TIME
|
| Executive Desk Hdwre Pk
...plus other(s)
|
HOME OFFICE COLLECTION PLANS FOR THIS UNIQUE GROUPING WILL ACCOMMODATE THE MODERN REQUIREMENTS OF YOUR COMPUTER AND OFFICE WHILE MAINTAINING A WARM, TRADITIONAL FEEL. DETAILED PLANS SHOW YOU HOW TO BUILD:
931-899 - EXECUTIVE DESK WITH FILE DRAWER, 6 STORAGE DRAWERS AND PENCIL DRAWER - 54"L X 27"W X 30"H. 931-906 - H114 - EXECUTIVE DESK HARDWARE PAK (CONTAINS EIGHT 7" LONG SOLID OAK HANDLES, EIGHT 1-1/8 X 1/4" NYLON REAR DRAWER GUIDES (2-3/8" X 1-3/4" OVERALL), SIXTEEN NYLON DRAWER SADDLES, SMALL PACKAGE OF 1" LONG BRADS AND MISCELLANEOUS PHILLIPS HEAD SCREWS AND BRACKETS).
931-871 - FAX/PRINTER STAND THAT ALLOWS YOU TO FEED AND STORE PAPER UNDERNEATH - 21"L X 24"W X 30"H. 931-878 - H111 - FAX/PRINTER STAND HARDWARE PAK (CONTAINS FOUR 2" X 15/16" ANTIQUE BRASS FINISH NON-MORTISE HINGES - (MOUNTING SCREWS INCLUDED), ONE 1" DIA. BRASS KNOB, TWO FRICTION-MOUNT MAGNETIC CATCHES (REQUIRES 9/16" DIA. HOLE), FOUR SHELF SUPPORTS AND MISCELLANEOUS PHILLIPS HEAD SCREWS).
931-885 - COMPUTER DESK/HUTCH WITH PULLOUT MOUSE PAD AND KEYBOARD TRAY - 30"L X 26"W X 77"H. 931-892 - H110 - COMPUTER DESK & HUTCH HARDWARE PAK (CONTAINS FOUR 7" LONG SOLID OAK HANDLES, THREE 1-1/8 X 1/4" NYLON REAR DRAWER GUIDES (2-3/8" X 1-3/4" OVERALL), SIX NYLON DRAWER SADDLES, TWO 2" X 15/16" ANTIQUE BRASS FINISH NON-MORTISE HINGES - (MOUNTING SCREWS INCLUDED), ONE 1" DIA. BRASS KNOB, FOUR SHELF BRACKETS, ONE FRICTION-FIT MAGNETIC CATCH (9/16" DIA. HOLE REQUIRED), SMALL PACKAGE OF 1" LONG BRADS, SMALL PACKAGE OF PHILLIPS HEAD SCREWS AND MISCELLANEOUS PHILLIPS HEAD SCREWS AND BRACKETS).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Plans - Not Listed Elsewhere
|
INCRA® PLANS LET YOU MAKE WOODEN HINGES FOR INCREDIBLY DETAILED BOXES
|
| Incra Hinge Plan
|
USE INCRA® WOODEN HINGE PLANS TO MAKE BEAUTIFUL WOODEN HINGES FOR JEWELRY BOXES OR CIGAR HUMIDORS:
EACH STEP IS SHOWN IN DETAIL - VERY IMPRESSIVE ON GIFTS AND OTHER SPECIAL BOXES. USE CONTRASTING OR MATCHING WOODS FOR DIFFERENT EFFECTS - INCLUDES FREE ALUMINUM GUIDE FOR DRILLING HINGE PIVOT PIN HOLES. CONSTRUCTION REQUIRES INCRA® JIG, ROUTER TABLE AND ROUTER, 3/8" BULL NOSE ROUTER BIT, 3/8" STRAIGHT BIT, 1/8" DRILL BIT AND 1/8" DIA. BRASS ROD. USA.
|
|
|
|
Portable Power Tool Accessories - Jigs And Fixtures
|
FASTER, MORE ACCURATE CABINET HINGE PLATE INSTALLATIONS - WITHOUT MEASURING!
|
| Scp-0105 Hinge Plate Jig
|
DESIGNED FOR SALICE® CAST AND STAMPED STEEL HINGE PLATES, THE EZ-MOUNT SCP-0105 HINGE PLATE JIG AND DOOR HINGE CENTERING GUIDE LETS YOU INSTALL CABINET HINGE PLATES MUCH MORE QUICKLY, WITHOUT TIME-CONSUMING MEASUREMENTS OR FLIMSY PAPER TEMPLATES:
SIMPLY PRESS YOUR MODEL BAR3R09, BAR3R69, BAV3L09F OR BAV3L69F HINGE PLATE INTO THE DURABLE ABS PLASTIC JIG. USING THE BUILT-IN HANDGRIP, ALIGN THE JIG WITH THE CABINET TOP OR BOTTOM. THEN, DRILL MOUNTING HOLES USING THE HINGE PLATE AS A GUIDE, SCREW HINGE PLATE INTO PLACE AND REMOVE JIG FROM INSTALLED HARDWARE. DIRECTIONS FOR ALIGNING AND BORING CABINET DOOR HINGE MOUNTING HOLES INCLUDED (BORING MACHINE OR REGULAR DRILL PRESS REQUIRED). COMES WITH ONE OVERLAY DOOR JIG, ONE INSET DOOR JIG AND INSTRUCTIONS. USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
EASILY AND ACCURATELY INSTALL DOOR HINGES USING YOUR ROUTER AND THE PORTER-CABLE® HINGE BUTT TEMPLATE KIT
|
| Hinge Butt Template Kit
...plus other(s)
|
THE PORTER-CABLE® MODEL 59381 HINGE BUTT TEMPLATE KIT IS EASY TO USE AND PERMITS MORTISING DOORS AND JAMBS FROM 78" TO 84" LONG AND ENSURES PERFECTS MATCHING OF HINGE LOCATIONS:
FEATURES INCLUDE SPRING LOADED NAILS, THAT STAY UP PRIOR TO DRIVING, AND CAN BE REMOVED WITH CLAW HAMMER; THICKNESS PINS TO MOUNT DOORS TO JAMB WITHOUT JAMB STOPS; END GAUGES FOR EACH END OF THE TEMPLATE; AND A FULL LENGTH LOCATOR WITH EACH TEMPLATE SECTION. INCLUDES TEMPLATES FOR 6'6", 6'8" AND 7'0" JAMBS AND DOORS; A HINGE TEMPLATE CAN BE ADJUSTED FOR CUTTING 3" TO 6" MORTISES FOR COMMON HINGE SIZES. ALSO INCLUDES 1/2" DIA. MORTISING BIT, TEMPLATE GUIDE, LOCK NUT, CARRYING CASE AND INSTRUCTION MANUAL. 878-955 - MODEL 517 LOCK FACE TEMPLATE IS USED TO QUICKLY ROUT LOCK FACES INTO DOORS AFTER THE BOX LOCK MORTISE HAS BEEN COMPLETED; AUTOMATICALLY SELF CENTERING AND SELF BEVELING.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
IMPROVED PORTER-CABLE® DOOR HINGE TEMPLATE LETS YOU ROUT BOTH DOOR AND DOOR FRAME HINGES
|
| Passage Door Hinge Template W/hss Bit
...plus other(s)
|
THE PORTER-CABLE® 59370 DOOR HINGE TEMPLATE AND YOUR ROUTER MAKE INSTALLATIONS FASTER AND EASIER BY ACCOMMODATING FIVE DOOR THICKNESSES AND EIGHT HINGE SIZES:
THICKNESSES INCLUDE 1-3/8", 1-3/4", 2", 2-1/4" AND 2-1/2". HINGES RANGE FROM 2-1/2" TO 6" INCLUSIVE, IN 1/2" INCREMENTS. TWO, QUICK ADJUST RATCHETING ROUTER BIT GUIDES HANDLE 1/4", 5/8" RADIUS AND SQUARE CORNER HINGES (CORNER CHISEL REQUIRED - NOT INCLUDED). COMPLEMENTARY STRIKE AND LATCH TEMPLATE 59375 (SOLD SEPARATELY) HAS A DOUBLE WINDOW DESIGN AND THREE ADJUSTABLE INSERTS TO HANDLE 1" AND 1-1/8" LATCH PLATE WIDTHS AND 2-1/4" AND 2-3/4" STRIKE PLATE SIZES - TEMPLATE CENTER MARKS ENABLE QUICK AND SIMPLE ALIGNMENT. EACH TEMPLATE COMES WITH FOUR POSITIVE PLACEMENT LOCK-IN PINS, TWO DOUBLE HEADED NAILS, HSS BEARING GUIDED ROUTER BIT, INSTRUCTION MANUAL AND QUICK REFERENCE INSTRUCTION CARD. LOCK-IN PINS ENABLE QUICK AND SECURE PLACEMENT OF TEMPLATE ONTO DOOR OR JAMB. EXTENDED TEMPLATE PLATFORM PROVIDES ADDED STABILITY FOR YOUR ROUTER. DOUBLE HEADED NAILS ENSURE EASY REMOVAL FROM DOOR AND FRAME. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
TOOL FREE GUIDE BUSHINGS FOR BOSCH MODEL 1613, 1614, 1617, 1618 OR 1619 ROUTERS
|
| 1/4" Radius Hinge Template Guide
...plus other(s)
|
TOOL FREE, BOSCH ROUTER GUIDE BUSHINGS SNAP IN AND OUT FOR QUICK, EASY ROUTING:
888-029 - SET OF 4 TEMPLATE GUIDE BUSHINGS (SMALL DOVETAIL, 1/4" AND 5/8" RADIUS HINGE, 3/8" GENERAL APPLICATION). 932-299 - THREADED TEMPLATE GUIDE BUSHING ADAPTER ALLOWS USE OF PORTER-CABLE®, BLACK & DECKER® OR SIMILAR BUSHINGS. ROUTER SUB-BASE ALIGNMENT KIT FOR TEMPLATE GUIDE BUSHINGS. USA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
SET - BOSCH GUIDE BUSHING SET
|
| Set - Bosch Guide Bushing Set
...plus other(s)
|
COMBINE THE LEIGH D4R-24 DOVETAIL JIG WITH YOUR FAVORITE 1/2" OR 8MM COLLET ROUTER AND YOU CAN EASILY PRODUCE LARGE AND SMALL THROUGH, ANGLED THROUGH, HALF BLIND, RABBETED HALF BLIND, END-ON-END AND SLIDING DOVETAIL JOINTS:
JIG CAN ACCOMMODATE BOARDS UP TO 24" WIDE X 1-1/2" THICK WITH INFINITE PIN, TAIL WIDTH AND SPACING ADJUSTMENTS FOR A CLASSIC HAND CUT LOOK. INCLUDES 1/2" DIA. 8° DOVETAIL, 5/16" DIA. STRAIGHT AND 1/2" DIA. 14° DOVETAIL BITS (8MM SHANKS), 7/16" O.D. UNIVERSAL GUIDE BUSHING, 1/2"-TO-8MM COLLET REDUCER, USER GUIDE, INSTRUCTIONAL DVD, CAM-ACTION SPEED CLAMPS, CROSSCUT/SLIDING DOVETAIL GUIDE BAR, SQUARE DRIVER AND ASSEMBLY WRENCH. REQUIRES 7/16" AND 5/8" BUSHINGS (NOT INCLUDED).
M2 LEIGH MULTIPLE MORTISE AND TENON ATTACHMENT ATTACHES DIRECTLY TO THE D4R-24 AND REPLACES DOVETAILING FINGERS SO YOU CAN CUT PERFECT MULTIPLE MORTISE AND TENON JOINTS FROM 5/16" X 5/8" TO 1-1/2" X 2-1/2": CUSTOMIZE THE FIT AND DESIGN TO SUIT YOUR REQUIREMENTS AND SELECT FROM THREE CORNER RADII (5/32", 1/4" OR SQUARE (WITH CHISELING). 1/2" HSS SPIRAL UPCUT BIT AND INSTRUCTIONS INCLUDED.
ISOLOC TEMPLATES ARE PRECISION CNC-MACHINED ALUMINUM ALLOY AND COME WITH AN INSTRUCTION MANUAL AND PATENTED 5-PIECE VGS VARIABLE TEMPLATE GUIDEBUSH SYSTEM WITH NOMINAL 1/2" OD GUIDE.
AC-D24 ROUTER BIT AND VACUUM ATTACHMENT ACCESSORY KIT AND THE VRS-D24 VACUUM AND ROUTER SUPPORT PROVIDE CONVENIENCE AND VERSATILITY.
FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
IMPROVED PORTER-CABLE® DOOR HINGE TEMPLATE LETS YOU ROUT BOTH DOOR AND DOOR FRAME HINGES
|
| Hinge Template + Carbide Router Bit
...plus other(s)
|
THE PORTER-CABLE® 59370 DOOR HINGE TEMPLATE AND YOUR ROUTER MAKE INSTALLATIONS FASTER AND EASIER BY ACCOMMODATING FIVE DOOR THICKNESSES AND EIGHT HINGE SIZES:
THICKNESSES INCLUDE 1-3/8", 1-3/4", 2", 2-1/4" AND 2-1/2". HINGES RANGE FROM 2-1/2" TO 6" INCLUSIVE, IN 1/2" INCREMENTS. TWO, QUICK ADJUST RATCHETING ROUTER BIT GUIDES HANDLE 1/4", 5/8" RADIUS AND SQUARE CORNER HINGES (CORNER CHISEL REQUIRED - NOT INCLUDED). COMPLEMENTARY STRIKE AND LATCH TEMPLATE 59375 (SOLD SEPARATELY) HAS A DOUBLE WINDOW DESIGN AND THREE ADJUSTABLE INSERTS TO HANDLE 1" AND 1-1/8" LATCH PLATE WIDTHS AND 2-1/4" AND 2-3/4" STRIKE PLATE SIZES - TEMPLATE CENTER MARKS ENABLE QUICK AND SIMPLE ALIGNMENT. EACH TEMPLATE COMES WITH FOUR POSITIVE PLACEMENT LOCK-IN PINS, TWO DOUBLE HEADED NAILS, HSS BEARING GUIDED ROUTER BIT, INSTRUCTION MANUAL AND QUICK REFERENCE INSTRUCTION CARD. LOCK-IN PINS ENABLE QUICK AND SECURE PLACEMENT OF TEMPLATE ONTO DOOR OR JAMB. EXTENDED TEMPLATE PLATFORM PROVIDES ADDED STABILITY FOR YOUR ROUTER. DOUBLE HEADED NAILS ENSURE EASY REMOVAL FROM DOOR AND FRAME. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.