|
|
|
Hardware Hinges - Concealed
|
SALICE® SINGLE PIVOT HINGE ALLOWS FULL 270° OPENING ON OVERLAY DOORS
|
| 270d Full O/l Single Pvt Hinge-screw-on
...plus other(s)
|
IDEAL FOR MOST CRITICAL APPLICATIONS, WHERE STABILITY AND ENDURANCE ARE REQUIRED. THESE HINGES ARE CERTIFIED FOR APPLICATIONS IN PUBLIC ENVIRONMENTS IN COMPLIANCE WITH FIR LEVEL 5 AND ANSI GRADE 1 REQUIREMENTS:
BRIGHT NICKEL DIE CAST CUP AND ARM WITH SINGLE PIVOT DESIGN. FITS STANDARD 35MM BORING PATTERN WITH 45MM FASTENER SPREAD; CUP BORING DEPTH IS 12MM MINIMUM. SPRING ACTION SELF CLOSING. COMPENSATING SIDE ADJUSTMENT FROM -3MM TO +3MM. HEIGHT ADJUSTMENT ±2MM SNAP ON MOUNTING OF HINGE ARM TO DOMI™ SERIES 200 MOUNTING PLATES. DEPTH ADJUSTMENT OFROM-.5MM TO +2.8MM. ANTI-SLIDING SAFETY STOP. CAN BE MOUNTED WITH THE HINGE KNUCKLE RECESSED INTO THE DOOR EDGE OR LEFT EXPOSED BEYOND THE EDGE OF THE DOOR, FOR RECESSED KNUCKLE APPLICATIONS CUP BORING CENTER DISTANCE IS 18.5MM FROM THE DOOR EDGE AND A RELIEF OF 8MM X 43MM MUST BE MILLED INTO THE DOOR EDGE TO ACCOMMODATE THE HINGE MECHANISM. FOR EXPOSED KNUCKLE APPLICATIONS, HINGE CUP BORING CENTER DISTANCE IS 10.5MM FROM THE DOOR EDGE, ALLOWING AN OPENING FOR THE HINGE MECHANISM. MAY BE USED ON INSET, HALF OVERLAY OR FULL OVERLAY DOORS ON FRAMELESS (PANEL) CABINETS. PLATE HEIGHT REQUIREMENTS RANGE FROM 0MM TO 18MM DEPENDING ON APPLICATION. AVAILABLE IN SCREW-ON OR PRESS-IN (8MM DOWEL) STYLES ALL SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FH NICKEL PLATED WOOD SCREWS PURCHASE SEPARATELY FOR COMPLETE APPLICATION INFORMATION, REFER TO THE .PDF BROCHURE BELOW. MANUFACTURER'S LIMITED LIFETIME WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Specialty
|
270° PIVOT HINGES FOR CABINETS AND FURNITURE
|
| 270 Degree Hinge-nickel
...plus other(s)
|
270° PIVOT HINGES ALLOW TOTAL ACCESS TO TELEVISIONS, DVDS, VCRS AND PULLOUTS:
WRAP-AROUND DESIGN SURFACE MOUNTS TO CABINET WALL AND 35MM DOOR HOLE. CUP AND ARM SEPARATE WITHOUT TOOLS. ±1/8" VERTICAL ADJUSTMENT IS ACCOMPLISHED WITHOUT LOOSENING MOUNTING SCREWS. AVAILABLE IN FOUR FINISHES. USES #6 SCREWS (NOT INCLUDED). NOTE: HINGE KNUCKLE IS EXPOSED OUTSIDE CABINET.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SURFACE MOUNT HINGE SCREWS - 946-161.
|
|
|
|
Hardware Hinges - Specialty
|
DOUBLE LOCKING BIFOLD DOOR HINGES
|
| Dbl Locking Bi Fold Hinge
|
THE SPRING LOADED CYLINDER OF THE DOUBLE LOCKING HINGE HOLDS BI-FOLD DOORS CLOSED, HALF OR FULLY OPEN, YET RELEASES EASILY:
MINIMUM STILE WIDTH IS 1-1/8". BLACK, POWDER COAT FINISH LASTS FOR YEARS. WORKS GREAT WITH 270° HINGES AS AN ALTERNATIVE TO POCKET DOORS. HINGE MEASURES 2-1/2" X 2-1/2" (SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Surface Mounted
|
SURFACE MOUNT 270° OVERLAY DOOR HINGE
|
| Ovrlay Dr Hng 270 Opn Ant Br
|
EASY TO INSTALL SURFACE MOUNT OVERLAY HINGE ATTACHES TO THE EDGE AND SIDE OF THE DOOR AND CABINET ADDING STRENGTH AND SUPPORT. 270° OPENING MAKES THESE A GOOD CHOICE FOR ENTERTAINMENT CENTERS:
DESIGNED FOR 5/8" THICK DOORS. HINGE IS MANUFACTURED FROM ANTIQUE BRASS PLATED 0.045 GAUGE STEEL. FIXED PIN HINGES ARE SOLD IN PAIRS WITH MOUNTING SCREWS INCLUDED.
|
|
|
|
Advanced Search Tools
Browse
will