|
|
|
Hardware Casters And Glides - Adjustable Glides
|
HEAVY-DUTY FURNITURE SWIVEL GLIDES WITH MOUNTING PLATES
|
| Swivel Glide W/plate
|
FEATURING 1-1/2" LONG STEEL STUDS WITH 1-1/8" DIA. HIGH-DENSITY PLASTIC FEET, THESE FURNITURE SWIVEL GLIDES COME WITH 1-1/4" DIA. METAL MOUNTING PLATES WITH 3/8-16 THREADS:
INSTALLATION REQUIRES DRILLING 7/16" DIA. X 1-1/2" DEEP HOLES INTO LEGS IN ADDITION TO MOUNTING PLATE PILOT HOLES (SCREWS INCLUDED). NICKEL CHROME FINISH - BASE SWIVELS ABOUT 15° UNDER LOAD. SOLD IN BAGS OF FOUR. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
BLUM® CABINET LEVELING SYSTEM HANDLES UNEVEN FLOORS
|
| Cabinet Leveler-screw-on
...plus other(s)
|
FROM BLUM®, THIS SYSTEM LETS YOU LEVEL CABINETS UP TO 850 POUNDS QUICKLY AND EASILY. USE THE COMPLETE SYSTEM OF LEVELERS, TOE-KICK CLIPS AND COVER CAPS TO BEST FIT YOUR NEEDS :
LEVELERS ADJUST FROM 3-3/4" TO 5-1/2" TO ACCOMMODATE UNEVEN FLOORING. 850-POUND WEIGHT CAPACITY. LEVELERS ARE BLACK ABS PLASTIC CONSTRUCTION. SCREW ON LEVELERS MOUNT THROUGH A 10MM HOLE BORED IN THE CABINET BASE. ADJUSTMENTS MUST BE MADE AT THE BASE OF THE LEVELER. PRESS-IN LEVELERS MOUNT INTO A 30MM DIAMETER X 12MM DEEP BORE IN THE BOTTOM OF THE CABINET BASE. ADJUSTMENTS CAN BE MADE THROUGH THE CABINET BOTTOM. TOE KICK CLIPS SNAP ON TO LEVELING LEGS FOR SIMPLE INSTALLATION. TOE KICK CLIPS ARE AVAILABLE WITH EITHER SCREW-ON OR PRESS IN MOUNTING PLATES. OPTIONAL WHITE NYLON COVER CAPS FIT INTO MOUNTING SCREWS OR INTO ADJUSTMENT HOLE IN PRESS-IN LEGS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
30MM FORSTNER BIT - 913-700. 10MM BRAD POINT BIT- 944-161 .
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
TABLE SHOX® AUTOMATICALLY ADJUST WOBBLY TABLES
|
| Table Shox Hydraulic Leveler
|
TABLE SHOX® AUTOMATICALLY RE-ADJUSTS EACH TIME THE TABLE IS MOVED.
EASILY MOUNT TO TABLES WITH 1/4-20 THREADED STUDS. ADJUSTS UP TO 5/16 ON ANY UNEVEN SURFACE. STEEL MECHANISM WITH POLYURETHANE AND NON-SKID IMPACT RESISTANT NYLON SHELL. LEVELERS HAVE SWIVELING ACTION FOR INCREASED STABILITY. WILL ACCOMMODATE 100 LB. PER LEG OR 400 LB FOR A TABLE. SUITABLE FOR INDOOR OR OUTDOOR USE. PACKED IN BAGS OF 4 EACH.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
SUPERLEVEL® AND SUPERLEVEL II® AUTOMATICALLY ADJUST TO STOP WOBBLY TABLES OR EQUIPMENT
|
| Superlevel Self Levelling Glide
...plus other(s)
|
|
SUPERLEVEL® MOUNTS TO TABLE BASES OR EQUIPMENT CASES BY 1/4-20X3/8" THREADED STUDS. SUPERLEVEL II® MOUNTS WITH A 3M™ VHB ADHESIVE PAD. BOTH STYLES WILL ACCOMMODATE LOADS OF 125 LB. PER LEG OR 500 LB. PER TABLE. LEVELERS OPERATE AUTOMATICALLY NO MANUAL ADJUSTMENT NECESSARY TO ACCOMMODATE UP TO 1/4" OF "WOBBLE" BY MEANS OF A SPRING AND RAMP MECHANISM. BUILT TO LAST USING HIGH IMPACT PLASTIC AND STAINLESS STEEL COMPONENTS. CORROSION RESISTANT PARTS MAY BE USED INDOORS OR OUTDOORS. BASE DIAMETER IS 1.28" AND BOTH STYLES ARE NOMINALLY 1" INSTALLED HEIGHT. AVAILABLE IN BAGS OF 4.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
CABINET LEVELERS HANDLE UNEVEN FLOORS
|
| Cabinet Leveling Legs
|
|
EASILY LEVEL A SINGLE CABINET OR A FULL WALL-LENGTH RUN WITH THESE ADJUSTABLE LEVELERS. MADE FROM DURABLE ABS PLASTIC, THE TOP FLANGE SCREWS ON TO THE CABINET BASE AND THE LEG RESTS ON A 1-3/4" DIAMETER ADJUSTABLE FOOT. LEVELERS ADJUST FROM 3-3/4 TO 6-1/8" IN HEIGHT. WEIGHT CAPACITY IS 200 LB. PER LEG OR 800 LB. PER SET OF 4 LEGS. SETS INCLUDE BRACKETS WHICH SCREW ON TO THE TOE KICK AND CLIP ON TO THE ADJUSTABLE LEG. PACKAGE INCLUDES 4 LEGS, 2 TOE KICK BRACKETS AND MOUNTING SCREWS TO FASTEN THE LEGS TO THE CABINET BASE.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
SWIVEL GLIDES EASILY HANDLE ANGLED LEGS
|
| 1/4-20 Swivel Glide W/t-nuts
|
IDEAL LEVELERS FOR TABLES, CHAIRS OR ANY FURNITURE WITH ANGLED LEGS:
WHITE NYLON BASE WITH NICKEL PLATED METAL CAP. 1-1/4" DIAMETER BASE WITH 1" LONG 1/4-20 THREADED STUD. NYLON CAP HAS A 7/8" DIAMETER FOOTPRINT. SWIVEL UP TO 20° TO ACCOMMODATE UNEVEN SURFACES OR ANGLED LEGS. SOLD IN SETS OF 4 WITH 1/4-20 X 9/16" T-NUTS INCLUDED. FOR WOODEN LEGS, BORE A 5/16" DIAMETER X 1" HOLE TO MOUNT.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
INNOVATIVE ULTRA GLIDE™ LEVELERS ADD STRENGTH AND STABILITY TO THIN PANELS
|
| Ultra-glide Leveler 1/4-20 X 2" Oal
|
UNIQUE DESIGN ALLOWS USE IN COMPOSITE FURNITURE PANELS AS THIN AS 3/4" WITH ADDED RESISTANCE TO LATERAL (SLIDING) PRESSURE AND NO DROP OUT WHEN FURNITURE IS LIFTED:
ULTRA GLIDE™ LEVELERS MOUNT INTO A 5/16" X 1-1/2" DEEP BORE IN FURNITURE PANELS OR LEGS. UNLIKE STANDARD T-NUT LEVELERS, ULTRA GLIDE™ LEVELERS INSTALL USING A PROPELL NUT WITH LEFT-HAND KNIFE THREADS WHICH LOCK INTO THE MOUNTING SURFACE, ELIMINATING DROP OUT WHEN FURNITURE IS LIFTED. THE 1-1/2" LONG 1/4-20 THREADED STUD HAS A 5/16" DIAMETER STEEL PILOT SLEEVE AT THE TOP WHICH RIDES IN THE BORE AND PROVIDES LATERAL SUPPORT WHEN FURNITURE IS SLID ALONG THE FLOOR. 11/16" DIAMETER FOOT IS MOLDED TO THE STUD AND INCORPORATES A HEX SHAPE THAT ALLOWS ADJUSTMENT USING A 5/8" OPEN-END WRENCH. SOLD IN BAGS OF 10 COMPLETE LEVELERS. TAIWAN.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
PLATED STEEL FURNITURE GLIDES WITH PROTECTIVE RUBBER FEET
|
| 1" Plated Glide W/t-nut
...plus other(s)
|
WITH 1" LONG STEEL STUDS AND 1-1/16" DIA. RUBBER FEET, PLATED STEEL FURNITURE GLIDES HELP PREVENT MARRING AND SCRATCHING:
INSTALLATION REQUIRES DRILLING 5/16" DIA. X 1-1/4" DEEP HOLES INTO LEGS. 1" DIA. METAL TEE NUTS WITH 1/4-20 THREADS INCLUDED. SOLD IN BAGS OF FOUR AND 100. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
CABINET LEVELING SYSTEM DESIGNED TO SUPPORT HEAVY LOADS
|
| Set - Pair Of Cabinet Levelers
...plus other(s)
|
ENSURE ACCURATE CABINET LEVELING AND STUDY SUPPORT USING MEIER MODEL 300-Z2-Z2 HEAVY DUTY LEVELERS, WHICH PROVIDE AN IMPRESSIVE 330-LB. LOAD CAPACITY, EACH:
HEIGHT ADJUSTS A FULL INCH USING 6MM HEX WRENCH (SOLD SEPARATELY). 1-1/2" DIA. BASE FEATURES METAL INSERT AND LARGE FLOATING ABS FOOT. MOUNTING HARDWARE, WHITE COVER PLUGS AND COMPLETE INSTRUCTIONS INCLUDED. SOLD IN PAIRS OR INDIVIDUALLY.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
FURNITURE INSERT LEVELERS INSTALL AND ADJUST EASILY
|
| 14mm Levelers 6"
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
HEAVY DUTY LEVELERS ALLOW PRECISE CABINET ADJUSTMENTS
|
| Hd Adjustable Leveler
...plus other(s)
|
THE STEEL BRACKET ON EACH OF THESE CABINET LEVELERS CATCHES THE BOTTOM EDGE OF THE CABINET BOX WHILE SCREWS FASTEN THE LEVELER INTO PLACE:
937-023 - ADJUSTABLE LEVELER FASTENS ONTO EITHER CABINET SIDE WITH INCLUDED SCREWS.. HEIGHT ADJUSTMENTS ARE MADE THROUGH CABINET FLOOR WITH 5/32" HEX WRENCH (NOT INCLUDED) - HEIGHT ADJUSTS 2-3/4". INCLUDES NON-MARRING PLASTIC CAP TO PROTECT FLOORS. MINIMUM HEIGHT REQUIREMENT IS 2-1/4" FOR MOUNTING. 943-713 - ADJUSTABLE LEVELERS SCREW MOUNT INTO CABINET CORNERS (SOLD IN PAIRS - LEFT AND RIGHT; SCREWS INCLUDED). HEIGHT ADJUSTMENTS ARE MADE THROUGH CABINET FLOOR WITH FLAT BLADE SCREWDRIVER - HEIGHT ADJUSTS 2-1/4". STEEL FOOT WITH PLASTIC CAP WILL NOT MARK FLOORS. 2-1/4" MINIMUM HEIGHT CLEARANCE.
|
|
|
|
Hardware Casters And Glides - Tack-on Glides
|
POLY TACK GLIDES INSTALL EASILY ON WOODEN FURNITURE LEGS
|
| 5/8" Gray Tack Glides
...plus other(s)
|
SIMPLY NAIL THESE GLIDES IN PLACE ON WOODEN LEGS FOR EASE OF MOVEMENT AND PROTECTION FOR HARD FLOORS.
LINEAR POLYMER BASE PROVIDES EASY GLIDING ON MOST HARD SURFACES. HELD IN PLACE BY 23/32" LONG TACK. AVAILABLE IN GRAY(TAUPE) OR WHITE IN 5/8" OR 3/4" DIAMETER. SOLD IN BAGS OF 100 PIECES. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Tack-on Glides
|
FURNITURE POLY TACK GLIDES INSTALL EASILY
|
| 3/4" Gray Tack Glides
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Tack-on Glides
|
RUBBER CUSHIONS ADD DURABILITY TO THESE TACK GLIDES
|
| Plasti-cushion Tack Glide
...plus other(s)
|
NICKEL PLATED STEEL FURNITURE TACK GLIDES GLIDE SMOOTHLY AND HAVE 7/8" DIA. BASES WITH 7/8" NAIL LENGTHS:
SIMPLY POUND INTO THE BOTTOM OF WOOD LEGS. SOLD IN BAGS OF 10 AND 100. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Tack-on Glides
|
TAP-IN GLIDES PROTECT FLOORS AND WOODEN FUNITURE LEGS
|
| Tap-in Glides Brown 7/8"
...plus other(s)
|
AVAILABLE IN BROWN OR WHITE, TAP-IN GLIDES COME IN THREE SIZES - 7/8", 1" AND 1-1/2" DIA. - AND WORK WELL WITH WOOD AS WELL AS RATTAN AND CANE LEGS:
WOOL FELT BOTTOM ATTACHES TO A PLASTIC BASE THAT HAS A METAL RING SPECIFICALLY MADE FOR TAPPING INTO END GRAIN. SMALLER DIAMETER GLIDES COME IN PACKAGES OF 16 WHILE 1-1/2" DIA. GLIDES COME IN PACKAGES OF 8. USA.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)