|
|
|
Hardware Glass Door - Glass Door Hinges
|
THESE GLASS DOOR HINGES REQUIRE NO CUTTING OR DRILLING TO MOUNT
|
| Overlay Glass Door Hinge-chrome
...plus other(s)
|
OVERLAY AND INSET GLASS DOOR HINGES MOUNT ONTO THE INSIDE OF THE CASE USING SCREWS. OVERLAY LOCATES ITSELF AUTOMATICALLY INTO THE CORNER AND WILL OPEN TO 194°; NO CUTTING OR DRILLING REQUIRED:
HEAVY STEEL HINGES FIT 3/16" TO 1/4" THICK TEMPERED GLASS (HINGE MOUNTING SCREWS NOT INCLUDED). DOOR DIMENSIONS SHOULD NOT EXCEED 16" X 19" AND WEIGH NO MORE THAN 8 LB. OVERLAY HINGES PRODUCE A 7/16" OVERLAY ON THE SIDEWALL AND TOP EDGE. SELECT FROM BRASS, POLISHED CHROME OR BLACK FINISH.
|
|
|
|
Hardware Glass Door - Glass Door Hinges
|
GLASS DOOR PIVOT HINGES IN THREE COLORS
|
| Chrome Glass Door Pivot Hinge
...plus other(s)
|
ATTACH THESE GLASS DOOR PIVOT HINGES, AVAILABLE WITH CHROME, BRASS OR BLACK FINISH, TO GLASS PANELS 3/16" TO 1/4" THICK WITH SET SCREWS:
PAIR INCLUDES TOP AND BOTTOM HINGE WHICH WORK LEFT OR RIGHT. DESIGNED FOR INSET APPLICATION (SCREWS INCLUDED).
|
|
|
|
Hardware Glass Door - Glass Door Locks
|
SECURE SLIDING GLASS DOORS WITH A REMOVABLE LOCK
|
| Sliding Glass Door Lock
|
THE SAME RATCHETED BAR AND BARREL LOCK SEEN ON DISPLAY CASES ACROSS THE COUNTRY:
STEEL WITH A POLISHED CHROME FINISH, THE LOCK INCLUDES THE BARREL, RATCHET AND TWO KEYS. 5-1/2" LONG; FITS 3/16" TO 1/4" THICK GLASS.
|
|
|
|
Hardware Glass Door - Glass Door Pulls
|
GLASS DOOR STRIKE PLATE AND PULL
|
| Black Strike And Pull
...plus other(s)
|
COMBINATION STRIKE PLATE AND PULL ADHERES TO ANY GLASS PANEL WITH A PRESSURE SENSITIVE ADHESIVE PAD (PAD INCLUDED):
CHOOSE FROM CHROME, BLACK OR BRASS FINISHES. FITS GLASS FROM 3/16" TO 1/4" THICK. DESIGNED TO WORK WELL WITH MOST MAGNETIC CATCHES (MAGNETIC CATCHES NOT INCLUDED).
|
|
|
|
Hardware Glass Door - Glass Door Pulls
|
GLASS DOOR PULLS IN FOUR FINISHES
|
| Aluminum Glass Door Pull
...plus other(s)
|
|
2-3/4"T X 1"W GLASS DOOR PULLS PRESS FIT ONTO 1/4" GLASS AND WOOD DOORS. SOLID ALUMINUM AVAILABLE IN CLEAR, BRASS, BLACK AND BRONZE FINISHES.
|
|
|
|
Hardware Glass Door - Glass Retainers
|
QUICKLY AND SECURELY INSTALL GLASS PANELS IN WOODEN FRAMES
|
| Glass Panel Molding
|
EASILY INSTALL GLASS PANELS WITH FREUD® FLEXIBLE GLASS PANEL MOLDING.
MOLDING FITS INTO GROOVES .130" TO .145" IN WIDTH. CUTS EASILY WITH UTILITY KNIFE. REMAINS FLEXIBLE FOR EASY INSTALLATION AND SECURE FIT. NEUTRAL FRUITWOOD COLOR. SOLD IN CONVENIENT 25' LONG ROLLS.
|
|
|
|
Hardware Glass Door - Glass Retainers
|
TWO PIECE RETAINERS PROVIDE PANEL FASTENING WITH A SOFT TOUCH
|
| Glass Retainer Starter Kit-650 Pc
...plus other(s)
|
TENN-TEX PLASTICS® INTRODUCES A PANEL RETAINER SYSTEM THAT COMBINES A CAST POLYCARBONATE RIGID MOUNT WITH A VARIETY OF PLIABLE INSERTS ALLOWING YOU TO MOUNT NEARLY ANY THICKNESS PANEL IN FRAME RABBETS OF NEARLY ANY DEPTH:
THE TWO PIECE SYSTEM CONSISTS OF A CLEAR RIGID MOUNT THAT CAN BE COUPLED WITH RESILIENT INSERTS FROM 1/16" TO 29/64" THICK TO HANDLE A WIDE COMBINATION OF PANEL THICKNESSES AND RABBET DEPTHS. THE INSERTS ARE MADE FROM A CLEAR, RESILIENT POLYMER THAT PROVIDES A SECURE MOUNT WITH A SOFT TOUCH TO PROTECT FRAGILE PANELS; INSERTS ATTACH SECURELY TO MOUNTING CLIPS. ALLOW ABOUT 1/16" MORE THAN THE OFFSET BETWEEN THE PANEL AND FRAME FOR THE INSERTS TO COMPRESS. (I.E. A PANEL THAT IS FLUSH WITH THE FRAME WOULD REQUIRE A 1/16" INSERT.) 158-567 STARTER KIT INCLUDES 100 RETAINER CLIPS, 50 EACH 1/16", 3/16", 5/32", 13/64", 17/64", 5/16", 23/64" AND 29/64" RESILIENT INSERTS, AND 100 - #6X1/2" FH WOOD SCREWS, ALL IN A COMPARTMENTED STORAGE BOX WITH A CHART TO SELECT THE BEST INSERT FOR YOUR APPLICATION. A COPY OF THE SELECTION CHART IS AVAILABLE BELOW. INDIVIDUAL COMPONENTS ARE SOLD IN BAGS OF 50 EACH. MADE IN USA
|
|
|
|
Hardware Glass Door - Glass Retainers
|
GLASS RETAINING CLIPS
|
| .060" Tapered Panel Retainers
...plus other(s)
|
THE TAPERED PADS OF THESE RETAINING CLIPS FLATTEN OUT AS A SCREW IS TIGHTENED TO BOTH HOLD AND CUSHION THE PANE OF GLASS:
LOW PROFILE DESIGN MAKES THEM PRACTICALLY UNNOTICEABLE AFTER INSTALLATION. SELECT FROM FOUR PAD LENGTHS TO MATCH FLUSH TO 1/4" OFFSET MOUNTING. MOUNTING SCREWS INCLUDED WITH ALL PACKAGE SIZES. IMPORTED.
|
|
|
|
Hardware Glass Door - Glass Retainers
|
PANEL RETAINING CLIPS
|
| Glass Retaining Clips
...plus other(s)
|
PANEL RETAINING CLIPS HAVE A THUMBSCREW WITH A NON MARRING TIP THAT CAN SAFELY SECURE GLASS OR PANELS IN CABINET DOORS OR LIGHTING FIXTURES:
ACCOMMODATE MATERIALS UP TO 9/16" THICK. STATUARY BRONZE FINISH (MOUNTING SCREWS INCLUDED). SOLD IN BAGS OF 10 OR 100.
|
|
|
|
Hardware Glass Door - Sliding Glass Tracks
|
COMPLETE GLASS CABINET DOOR ASSEMBLIES IN TWO SIZES, TWO FINISHES
|
| 3' Aluminum Track-1/4" Glass
...plus other(s)
|
GLASS CABINET DOOR TRACK ASSEMBLY KITS INCLUDE UPPER GUIDE, TWO SHOES, DOUBLE TRACK, FOUR ROLLERS, CLIP GUIDES, GLAZING VINYL AND MOUNTING SCREWS - ALL THE HARDWARE NECESSARY TO MAKE ATTRACTIVE, FUNCTIONAL SLIDING GLASS DOORS:
3' OR 4' LONG - ALUMINUM OR BRONZE FINISH. GREAT FOR BATHROOM MEDICINE CABINETS AND BARS. FIT 1/4" THICK GLASS (NOT INCLUDED). FOR BEST FIT, GLASS PANELS SHOULD BE CUT 1-7/32" SHORTER THAN THE HEIGHT OF THE OPENING.
|
|
|
|
Advanced Search Tools
Browse
will