|
|
|
Hardware Casters And Glides - Adjustable Glides
|
HEAVY DUTY FURNITURE SWIVEL GLIDES
|
| Swivel Glide W/plate
|
FEATURING 1-1/2" LONG STEEL STUDS WITH 1-1/8" DIA. HIGH-DENSITY PLASTIC FEET, THESE FURNITURE SWIVEL GLIDES COME WITH 1-1/4" DIA. METAL MOUNTING PLATES WITH 3/8-16 THREADS:
INSTALLATION REQUIRES DRILLING 7/16" DIA. X 1-1/2" DEEP HOLES INTO LEGS IN ADDITION TO MOUNTING PLATE PILOT HOLES (SCREWS INCLUDED). NICKEL CHROME FINISH - BASE SWIVELS ABOUT 15° UNDER LOAD. SOLD IN BAGS OF FOUR. IMPORTED."
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
BLUM® CABINET LEVELING SYSTEM HANDLES UNEVEN FLOORS
|
| Cabinet Leveler-screw-on
...plus other(s)
|
FROM BLUM®, THIS SYSTEM LETS YOU LEVEL CABINETS UP TO 850 POUNDS QUICKLY AND EASILY. USE THE COMPLETE SYSTEM OF LEVELERS, TOE-KICK CLIPS AND COVER CAPS TO BEST FIT YOUR NEEDS :
LEVELERS ADJUST FROM 3-3/4" TO 5-1/2" TO ACCOMMODATE UNEVEN FLOORING. 850-POUND WEIGHT CAPACITY. LEVELERS ARE BLACK ABS PLASTIC CONSTRUCTION. SCREW ON LEVELERS MOUNT THROUGH A 10MM HOLE BORED IN THE CABINET BASE. ADJUSTMENTS MUST BE MADE AT THE BASE OF THE LEVELER. PRESS-IN LEVELERS MOUNT INTO A 30MM DIAMETER X 12MM DEEP BORE IN THE BOTTOM OF THE CABINET BASE. ADJUSTMENTS CAN BE MADE THROUGH THE CABINET BOTTOM. TOE KICK CLIPS SNAP ON TO LEVELING LEGS FOR SIMPLE INSTALLATION. TOE KICK CLIPS ARE AVAILABLE WITH EITHER SCREW-ON OR PRESS IN MOUNTING PLATES. OPTIONAL WHITE NYLON COVER CAPS FIT INTO MOUNTING SCREWS OR INTO ADJUSTMENT HOLE IN PRESS-IN LEGS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
30MM FORSTNER BIT - 913-700. 10MM BRAD POINT BIT- 944-161 .
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
HYDRAULIC LEVELERS FOR TABLE LEGS
|
| Table Shox Hydraulic Leveler
|
AUTOMATICALLY ADJUST TO UNEVEN SURFACES TO KEEP TABLES LEVEL:
RE-ADJUSTS EACH TIME THE TABLE IS MOVED.EASILY MOUNT TO TABLES WITH 1/4-20 THREADED STUDS.ADJUSTS UP TO 5/16 ON ANY UNEVEN SURFACE. STEEL MECHANISM WITH POLYURETHANE AND NON-SKID IMPACT RESISTANT NYLON SHELL. LEVELERS HAVE SWIVELING ACTION FOR INCREASED STABILITY. WILL ACCOMMODATE 100 LB. PER LEG OR 400 LB FOR A TABLE. SUITABLE FOR INDOOR OR OUTDOOR USE. PACKED IN BAGS OF 4 EACH.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
SELF LEVELING GLIDES FOR CHAIRS AND FURNITURE
|
| Superlevel Self Levelling Glide
...plus other(s)
|
AUTOMATICALLY ADJUST TO STOP WOBBLY TABLES, CHAIRS OR EQUIPMENT:
SUPER LEVEL™ MOUNTS TO TABLE BASES OR EQUIPMENT CASES BY 1/4-20X3/8" THREADED STUDS. SUPERLEVEL II™ MOUNTS WITH A 3M™ VHB ADHESIVE PAD. BOTH STYLES WILL ACCOMMODATE LOADS OF 125 LB. PER LEG OR 500 LB. PER TABLE. LEVELERS OPERATE AUTOMATICALLY NO MANUAL ADJUSTMENT NECESSARY TO ACCOMMODATE UP TO 1/4" OF "WOBBLE" BY MEANS OF A SPRING AND RAMP MECHANISM. BUILT TO LAST USING HIGH IMPACT PLASTIC AND STAINLESS STEEL COMPONENTS. CORROSION RESISTANT PARTS MAY BE USED INDOORS OR OUTDOORS. BASE DIAMETER IS 1.28" AND BOTH STYLES ARE NOMINALLY 1" INSTALLED HEIGHT. AVAILABLE IN BAGS OF 4."
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
CABINET LEVELING LEGS
|
| Cabinet Leveling Legs
|
|
EASILY LEVEL A SINGLE CABINET OR A FULL WALL-LENGTH RUN WITH THESE ADJUSTABLE LEVELERS. MADE FROM DURABLE ABS PLASTIC, THE TOP FLANGE SCREWS ON TO THE CABINET BASE AND THE LEG RESTS ON A 1-3/4" DIAMETER ADJUSTABLE FOOT. LEVELERS ADJUST FROM 3-3/4 TO 6-1/8" IN HEIGHT. WEIGHT CAPACITY IS 200 LB. PER LEG OR 800 LB. PER SET OF 4 LEGS. SETS INCLUDE BRACKETS WHICH SCREW ON TO THE TOE KICK AND CLIP ON TO THE ADJUSTABLE LEG. PACKAGE INCLUDES 4 LEGS, 2 TOE KICK BRACKETS AND MOUNTING SCREWS TO FASTEN THE LEGS TO THE CABINET BASE."
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
ADJUSTABLE FURNITURE GLIDES
|
| 1/4-20 Swivel Glide W/t-nuts
|
IDEAL LEVELERS FOR TABLES, CHAIRS OR ANY FURNITURE WITH ANGLED LEGS:
WHITE NYLON BASE WITH NICKEL PLATED METAL CAP. 1-1/4" DIAMETER BASE WITH 1" LONG 1/4-20 THREADED STUD. NYLON CAP HAS A 7/8" DIAMETER FOOTPRINT. SWIVEL UP TO 20° TO ACCOMMODATE UNEVEN SURFACES OR ANGLED LEGS. SOLD IN SETS OF 4 WITH 1/4-20 X 9/16" T-NUTS INCLUDED. FOR WOODEN LEGS, BORE A 5/16" DIAMETER X 1" HOLE TO MOUNT."
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
INNOVATIVE ULTRA GLIDE™ LEVELERS ADD STRENGTH AND STABILITY TO THIN PANELS
|
| Ultra-glide Leveler 1/4-20 X 2" Oal
|
UNIQUE DESIGN ALLOWS USE IN COMPOSITE FURNITURE PANELS AS THIN AS 3/4" WITH ADDED RESISTANCE TO LATERAL (SLIDING) PRESSURE AND NO DROP OUT WHEN FURNITURE IS LIFTED:
ULTRA GLIDE™ LEVELERS MOUNT INTO A 5/16" X 1-1/2" DEEP BORE IN FURNITURE PANELS OR LEGS. UNLIKE STANDARD T-NUT LEVELERS, ULTRA GLIDE™ LEVELERS INSTALL USING A PROPELL NUT WITH LEFT-HAND KNIFE THREADS WHICH LOCK INTO THE MOUNTING SURFACE, ELIMINATING DROP OUT WHEN FURNITURE IS LIFTED. THE 1-1/2" LONG 1/4-20 THREADED STUD HAS A 5/16" DIAMETER STEEL PILOT SLEEVE AT THE TOP WHICH RIDES IN THE BORE AND PROVIDES LATERAL SUPPORT WHEN FURNITURE IS SLID ALONG THE FLOOR. 11/16" DIAMETER FOOT IS MOLDED TO THE STUD AND INCORPORATES A HEX SHAPE THAT ALLOWS ADJUSTMENT USING A 5/8" OPEN-END WRENCH. SOLD IN BAGS OF 10 COMPLETE LEVELERS. TAIWAN.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
ADJUSTABLE PLATED STEEL FURNITURE GLIDES.
|
| 1" Plated Glide W/t-nut
...plus other(s)
|
ADJUSTABLE PLATED STEEL GLIDES PROTECT BOTH THE FURNITURE LEGS AND THE FLOOR. WITH 1" LONG STEEL STUDS AND 1-1/16" DIA. RUBBER FEET, PLATED STEEL FURNITURE GLIDES HELP PREVENT MARRING AND SCRATCHING:
INSTALLATION REQUIRES DRILLING 5/16" DIA. X 1-1/4" DEEP HOLES INTO LEGS. 1" DIA. METAL TEE NUTS WITH 1/4-20 THREADS INCLUDED. SOLD IN BAGS OF FOUR AND 100. IMPORTED."
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
CABINET LEVELING SYSTEM DESIGNED TO SUPPORT HEAVY LOADS
|
| Set - Pair Of Cabinet Levelers
...plus other(s)
|
ENSURE ACCURATE CABINET LEVELING AND STUDY SUPPORT USING MEIER MODEL 300-Z2-Z2 HEAVY DUTY LEVELERS, WHICH PROVIDE AN IMPRESSIVE 330-LB. LOAD CAPACITY, EACH:
HEIGHT ADJUSTS A FULL INCH USING 6MM HEX WRENCH (SOLD SEPARATELY). 1-1/2" DIA. BASE FEATURES METAL INSERT AND LARGE FLOATING ABS FOOT. MOUNTING HARDWARE, WHITE COVER PLUGS AND COMPLETE INSTRUCTIONS INCLUDED. SOLD IN PAIRS OR INDIVIDUALLY.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
14MM X 6" CABINET LEVELER"
|
| 14mm Levelers 6"
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
HEAVY DUTY CABINET LEVELERS
|
| Hd Adjustable Leveler
...plus other(s)
|
THE STEEL BRACKET ON EACH OF THESE CABINET LEVELERS CATCHES THE BOTTOM EDGE OF THE CABINET BOX AND WOOD SCREWS FASTEN THE LEVELER INTO PLACE:
937-023 - ADJUSTABLE LEVELER FASTENS ONTO EITHER CABINET SIDE WITH INCLUDED SCREWS.. HEIGHT ADJUSTMENTS ARE MADE THROUGH CABINET FLOOR WITH 5/32" HEX WRENCH (NOT INCLUDED) - HEIGHT ADJUSTS 2-3/4". INCLUDES NON-MARRING PLASTIC CAP TO PROTECT FLOORS. MINIMUM HEIGHT REQUIREMENT IS 2-1/4" FOR MOUNTING. 943-713 - ADJUSTABLE LEVELERS SCREW MOUNT INTO CABINET CORNERS (SOLD IN PAIRS - LEFT AND RIGHT; SCREWS INCLUDED). HEIGHT ADJUSTMENTS ARE MADE THROUGH CABINET FLOOR WITH FLAT BLADE SCREWDRIVER - HEIGHT ADJUSTS 2-1/4". STEEL FOOT WITH PLASTIC CAP WILL NOT MARK FLOORS. 2-1/4" MINIMUM HEIGHT CLEARANCE.
"
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
SELF ADJUSTING FOREVERGLIDES® ELIMINATE FURNITURE WOBBLE
|
| 1-1/4" Forever Glide-dark Oak
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
SOLID BEECHWOOD MAKES THESE CASTERS ATTRACTIVE STANDOUTS FROM THE REST
|
| 2" Beechwood Swivel Plate Caster
...plus other(s)
|
YOU WON'T SEE METAL OR PLASTIC WHEELS WHEN YOU INSTALL SELBY TOMORROW'S CASTERS. THAT'S BECAUSE THESE CASTERS FEATURE WHEELS THAT ARE SOLID, FINISHED BEECHWOOD - TWO SIZES FOR VERSATILITY:
141-755, 141-758 - 2" OD CASTER W/TIRE X 7/8" WIDE, 2-5/8" OVERALL HEIGHT, 1-5/8" SQUARE PLATE, 350 LBS. LOAD CAPACITY PER SET OF 4 CASTERS. 141-761, 141-764 - 3" OD CASTER W/TIRE X 15/16" WIDE, 3-15/16" OVERALL HEIGHT, 2-3/8" SQUARE PLATE, 440 LBS. LOAD CAPACITY PER SET OF 4 CASTERS. NON-MARKING POLYURETHANE TIRE AND SOUND DEADENER. STEEL PLATE AND YOKE WITH BALL BEARING SWIVEL. AVAILABLE WITH OR WITHOUT TOE ACTION BRAKES.
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
TWIN WHEEL NYLON CASTERS FEATURE PERFORMANCE AND DURABILITY FOR LIGHT DUTY APPLICATIONS
|
| 50mm Twin Wheel Caster-nylon-stem Mt
...plus other(s)
|
AVAILABLE IN TWO DIFFERENT STYLES, THESE TWIN-WHEEL CASTERS, ARE MADE FROM TOUGH NYLON FOR DURABILITY:
AVAILABLE WITH 5/16" X 1-1/2" STEM OR 1-1/2" SQUARE PLATE WITH 3/16" HOLES. STEEL SOCKETS INCLUDED WITH STEM MOUNT CASTERS. SCREWS NOT INCLUDED WITH PLATE MOUNT CASTERS. DESIGNED FOR USE ON OFFICE EQUIPMENT, FURNITURE AND UTILITY CARTS. NOT RATED FOR USE ON CHAIRS. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
MADICO® ULTIMATE FLOOR PROTECTION KIT™ PROTECTS A VARIETY OF FLOOR SURFACES
|
| Ultimate Floor Protection Kit-12 Pc
|
FELTAC™ FELT PADS PLUS SLIDEX™ HDPE (HIGH DENSITY POLYETHYLENE) PADS PLUS RUBBERIZED ANTI-SKID PADS GIVE YOU ALL THE OPTIONS YOU NEED TO PROTECT YOUR FLOORS:
FELTAC™ PADS ARE PRODUCED BY A UNIQUE MANUFACTURING PROCESS THAT COMBINES THE DURABILITY OF TIGHTLY WOVEN POLYESTER FIBERS WITH A DEEPLY INJECTED PVAC RESIN FOR STABILITY, A SOFT LOWER SURFACE AND A BONDED ADHESIVE THAT KEEPS THE PADS IN PLACE. FELTAC™ PSA PADS PROVIDE HARD WEARING AND LONG LASTING FLOOR PROTECTION, EVEN IF FLOORS AND PADS ARE WET. SUPER SLIDEX™ HIGH DENSITY POLYETHYLENE PADS HAVE A RIGID, SLIPPERY SURFACE THAT GLIDES EASILY OVER CARPETS AND RUGS. RUBBERIZED ANTI-SKID PADS KEEP FURNITURE IN PLACE ON NEARLY ANY FLOOR. SOLD IN A PACK OF 12 PADS, INCLUDING 4 EA 4" ROUND PSA FELT PADS, 4 EA 4" ROUND SLIDEX™ HDPE PADS AND 4EA 4" ROUND ANTI-SKID PADS. CANADA.
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
MADICO® FELTAC™ PSA FELT PADS PROTECT HARD SURFACE FLOORS
|
| Feltac Sliders Super Pack - 104 Pc
|
MADE FROM TIGHTLY KNIT POLYESTER FIBERS, FELTAC™ FELT PADS STRIKE THE PERFECT BALANCE BETWEEN STABILITY AND DURABILITY:
MADICO'S UNIQUE MANUFACTURING PROCESS COMBINES A THICK UPPER LAYER OF DENSE POLYESTER FELT INJECTED WITH PVAC RESIN FOR STABILITY WITH A SOFT FELT LOWER LAYER THAT PROTECTS THE FLOOR FINISH. A PEEL-AND-STICK ADHESIVE IS BONDED TO THE TOP LAYER ENSURING THAT THE PADS REMAIN ATTACHED DURING REPEATED MOVING OF FURNITURE, EVEN IF THE FLOOR AND PADS ARE WET. NEUTRAL BEIGE COLOR BLENDS WITH ALL ENVIRONMENTS. SOLD IN A PACK OF 104 PADS: 1 EA 6" X 9" PSA CUT TO FIT PAD, 24 EA 3/4" PSA PADS, 24 EA 1-1/8" PSA PADS, 16 EA 1-1/2" PSA PADS, 9 EA 1-7/8" PSA PADS, 12 EA 1/2" X 2-5/8" PSA PADS AND 18 EA 1" SQUARE PSA PADS. CANADA
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
MADICO® FLOOR PROTECTION KIT HANDLES BOTH HARD SURFACES AND CARPETED FLOORS
|
| Feltac Plus Slidex Super Pack-121 Pc
|
FELTAC™ FELT PADS PROVIDE 'STAY IN PLACE' PROTECTION FOR HARD SURFACES AND SUPER SLIDEX™ HIGH DENSITY POLYETHYLENE PADS MAKE FURNITURE EASY TO MOVE ON CARPETED FLOORS:
FELT PADS ARE PRODUCED BY A UNIQUE MANUFACTURING PROCESS THAT COMBINES THE DURABILITY OF TIGHTLY WOVEN POLYESTER FIBERS WITH A DEEPLY INJECTED PVAC RESIN FOR STABILITY, A SOFT LOWER LAYER AND A BONDED ADHESIVE THAT KEEPS THE PADS IN PLACE. FELTAC™ PSA PADS PROVIDE HARD WEARING AND LONG LASTING FLOOR PROTECTION, EVEN IF FLOORS OR PADS ARE WET. NEUTRAL BEIGE COLOR BLENDA WITH ANY ENVIRONMENT. SUPER SLIDEX™ HDPE (HIGH DENSITY POLYETHYLENE) PADS HAVE A RIGID, SLIPPERY SURFACE THAT GLIDES EASILY OVER CARPETS AND RUGS. CUP STYLE AND FOAM BACKED PADS ACCOMMODATE A WIDE VARIETY OF FURNITURE LEGS. SOLD IN A 121 PC PACK, INCLUDING 8 EA 3" SQUARE SLIDEX™ FOAM BACKED PADS, 4 EA 3-1/2" ROUND CUP SLIDEX™ PADS, 12 EA 1-7/8" DIA. PSA FELT PADS, 48 EA 7/8" DIA. PSA FELT PADS, 32 EA 1-1/8" DIA. PSA FELT PADS, 16 EA 1-1/2" DIA. PSA FELT PADS, 1 EA 6" X 9" CUT-TO-FIT PSA FELT PAD. CANADA
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
INDUSTRIAL CASTERS HAVE CAPACITIES UP TO 255 POUNDS
|
| 3" Swivel Plate Caster
...plus other(s)
|
RUGGED AND EASY ROLLING, INDUSTRIAL CASTERS FEATURE HEAVY ZINC PLATE FINISH AND RUBBER WHEELS:
CHOOSE FROM SWIVEL, RIGID OR SWIVEL WITH BRAKE. 2" CASTERS HAVE 1/4" BOLT HOLES; 3" HAVE 5/16" HOLES; 4" HAVE 3/8" HOLES (BOLTS NOT INCLUDED).
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
EASILY MOVE FURNITURE AND EQUIPMENT OVER CARPETED FLOORS
|
| 1-1/2" Ball Caster-ant Brass-stem Mt
...plus other(s)
|
THESE METAL TREAD BALL CASTERS ARE THE ORIGINAL SHEPHERD® CASTERS- MANUFACTURED IN THE USA FOR OVER 50 YEARS:
DURABLE ZINC DIE-CAST CONSTRUCTION MAKE THESE THE IDEAL CASTERS FOR FURNITURE, STORE FIXTURES, MEDICAL EQUIPMENT AND OFFICE EQUIPMENT. SELF LUBRICATING ACETYL RESIN BEARING. NO EXPOSED AXLE TO COLLECT DEBRIS. HARD TREAD DESIGNED FOR USE ON CARPETED FLOORS. CASTERS SWIVEL EASILY BECAUSE THE PIVOT POINT IS BELOW THE CASTER'S CENTER OF GRAVITY. AVAILABLE IN ANTIQUE BRASS, BRIGHT BRASS OR BRIGHT CHROME FINISH. GRIP NECK STEM MOUNT - 5/16" X 1-1/2" (INCLUDES SOCKETS). 1-1/2" DIA. CASTERS HAVE 40 LBS. DYNAMIC LOAD RATING (NOT RATED FOR CHAIRS) 2" CASTERS ARE RATED AT 75 LBS. 2-1/2" CASTERS ARE RATED AT 100 LBS. USA
|
|
|
|
Hardware Casters And Glides - Furniture - Cabinet
|
SHEPHERD®TWIN WHEEL CASTERS GIVE FURNITURE A CONTEMPORARY LOOK
|
| 2" Twin Wheel Caster-ant-brass-stem Mt
...plus other(s)
|
THE ENCLOSED AXLE OF THESE ATTRACTIVE CONTEMPORARY TWIN WHEEL CASTERS KEEPS FOREIGN MATTER OUT:
DURABLE ZINC DIE CAST BODY AND HOOD. CONCEALED AXLE PREVENTS ACCUMULATION OF DEBRIS. EACH 2" DIA. WHEEL MOVES INDEPENDENTLY, MINIMIZING RESISTANCE. 75 LBS. DYNAMIC LOAD. STEM MOUNT - 1-1/2" X 5/16" (SOCKETS INCLUDED). AVAILABLE IN THREE FINISHES, WITH OR WITHOUT BRAKES. USA
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
