|
|
|
Finishing Supplies - Spray Equipment
|
UPGRADES FOR OLDER, FUJI MIGHTY-MITE HVLP SPRAY GUNS
|
| Fuji #6 Cap For Spray Gun
...plus other(s)
|
INCREASE THE PERFORMANCE OF YOUR OLDER MODEL FSG-2051 FUJI MIGHTY-MITE HVLP SPRAY GUN WITH FACTORY ORIGINAL REPLACEMENT PARTS:
808-925, 808-932, 808-939 - #6 (0.110"/3MM) SPRAY CAPS, FLUID JETS AND NEEDLES ARE DESIGNED FOR EXTRA HIGH OUTPUT AND FAST COVERAGE; USE FOR STONE FINISH PAINTS, TEXTURE COATING, INDUSTRIAL PRIMERS, LATEX ON WALLS AND CEILINGS. 808-904, 808-911, 808-918 - #5 (0.079"/2MM) SPRAY CAPS, FLUID JETS AND NEEDLES ARE DESIGNED FOR HIGH OUTPUT; USE FOR SEALERS, VARNISH, POLYURETHANE, OIL BASED PAINTS, ENAMELS. 808-883, 808-897 - #3 (0.039"/1MM) SPRAY CAPS AND NEEDLES ARE DESIGNED FOR FINE TO MEDIUM OUTPUT; USE FOR WATER BASED LACQUERS, LACQUERS, SEALERS, STAINS, VARNISH, PRIMERS. NOTE: FLUID JET AND NEEDLE SIZES MUST ALWAYS MATCH, EXACTLY. CANADA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Finishing Supplies - Spray Equipment
|
GREAT PRICES ON LIMITED QUANTITIES OF ACCUSPRAY® HVLP SPRAY GUN REPLACEMENT PARTS
|
| 0.028 Needle/nozzle Set
...plus other(s)
|
THESE REPLACEMENT SPRAY GUN PARTS WILL COME IN HANDY IF YOU ARE INTERESTED IN UPGRADING THE CAPABILITIES OF YOUR ACCUSPRAY® HIGH VOLUME LOW PRESSURE (HVLP) SPRAY GUN. CHOOSE FROM NEEDLE/NOZZLE SETS, REPLACEMENT TIPS, AIR CAPS, CHECK VALVES AND REPLACEMENT GASKETS:
NEEDLE/NOZZLE SET:
897-513 - 91-105-028 0.028 NEEDLE/NOZZLE SET. 897-520 - 91-105-036 0.036 NEEDLE/NOZZLE SET.
ACCESSORIES:
897-667 - 94-049/3 EXTERNAL PLASTIC CHECK VALVE TUBE (SET OF 3). 840-826 - 94-034/4 1 QUART CUP GASKET (SET OF 4).
AIR CAPS:
902-404 - 91-071-7 #7 ALUMINUM AIR CAP. 897-492 - 91-009-8 #8 DELRIN® AIR CAP. 897-506 - 91-009-10 #10 DELRIN® AIR CAP.
DELRIN® NEEDLE/NOZZLE TIPS:
927-608 - 91-107-028/4 0.028 REPLACEMENT TIP (SET OF 4). 927-615 - 91-107-036/4 0.036 REPLACEMENT TIP (SET OF 4). 927-629 - 91-107-051/4 0.051 REPLACEMENT TIP(SET OF 4).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Finishing Supplies - Spray Equipment
|
REPLACEMENT NOZZLES FOR VANTEX YD-408 GRAVITY FEED HVLP SPRAY GUNS
|
| 0.8 Nozzle Set For 910165
...plus other(s)
|
USE THESE REPLACEMENT NOZZLES TO REPLACE OR EXPAND YOUR COLLECTION OF HIGH VOLUME LOW PRESSURE SPRAY GUN NOZZLES:
910-949 YD-408N-0.8 - 0.8MM NOZZLE (LIGHT VISCOSITY MATERIALS). 910-942 YD-408N-1.4 - 1.4MM NOZZLE (HEAVY VISCOSITY MATERIALS).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Finishing Supplies - Spray Equipment
|
J.E.MOSER'S EZ-AIRE 1000 HVLP TURBINE SPRAY SYSTEMS
|
| Cmprsr Drvn Hvlp W/cup
...plus other(s)
|
WHEN WE NEEDED A HIGH VOLUME LOW PRESSURE (HVLP) SPRAY SYSTEM THAT COULD LIVE UP TO THE J. E. MOSER'S® NAME, WOODWORKER'S SUPPLY® TURNED TO AMERICAN TURBINE:
EZ-AIRE 1000 USES A TWO STAGE TURBINE. 4.25 PSI AT GUN; 52 CFM AT 3/4" RESTRICTION, 104 CFM UNRESTRICTED. INCLUDES HVLP QUART SPRAY GUN WITH A 1.2MM LACQUER NEEDLE/NOZZLE SET UP AND 25' HOSE. EZ-AIRE 2000 USES A THREE STAGE TURBINE WITH BUILT IN COMPRESSOR FOR MORE CONSISTENT FEED PRESSURE. 61.5 CFM AT 3/4" RESTRICTION, 101 CFM UNRESTRICTED. INCLUDES 25' TURBINE HOSE, 25' COMPRESSOR HOSE AND AN AIR VALVE QUICK CONNECT. ALSO INCLUDES PRESSURE FEED GUN WITH A 1.2MM LACQUER NEEDLE/NOZZLE SET UP, QUART REMOTE POT WITH REGULATOR, AIR AND MATERIAL HOSES AND A CLEANING KIT. EACH UNIT INCLUDES A DETAILED INSTRUCTION MANUAL AND AN 18 MONTH MANUFACTURER'S WARRANTY. THE ONE QUART, HVLP SPRAY GUN WITH VENTURI INCLUDES A 1.2MM LACQUER NEEDLE/NOZZLE SETUP. OPERATION REQUIRES A 3-1/2HP COMPRESSOR AND PRESSURE REGULATOR (NOT INCLUDED) BETWEEN COMPRESSOR AND GUN - ADJUST PRESSURE TO CONTROL ATOMIZATION AND MINIMIZE OVERSPRAY. NOTE:A MULTI-HOLE AIRCAP IS RECOMMENDED FOR FINE FINISH WORK. REPLACEMENT NEEDLES AND NOZZLE SIZES MUST CORRESPOND, I.E., A 0.5MM NEEDLE MUST BE USED WITH A 0.5MM NOZZLE.
FLUID SET RECOMMENDATIONS:
0.5MM - DYES AND INKS. 0.7MM - WATERBORNE URETHANES. LACQUERS AND NON-WIPING STAINS. 1.0MM - WATERBORNE URETHANES. LACQUERS; FINE FINISH WORK.
LARGER SETS AVAILABLE UPON REQUEST:
1.2MM - LACQUERS, VARNISH, PRIMERS, ENAMELS, STAINS, EPOXY AND URETHANES; FINE FINISH WORK. 1.4MM - LACQUERS, VARNISH, PRIMERS, ENAMELS, STAINS, EPOXY AND URETHANES. 1.6MM - INDUSTRIAL FINISHES; HIGHER OUTPUT. 1.8MM - INDUSTRIAL FINISHES; HIGHER OUTPUT. 2.0MM - NITRATE AND BUTYRATE DOPE, LATEX, OIL WALL PAINT AND WAX BASED STRIPPERS. 2.4MM - LATEX, OIL WALL PAINT AND WAX BASED STRIPPERS. 2.8MM - LATEX, OIL WALL PAINT AND WAX BASED STRIPPERS. 3.6MM - LATEX AND OTHER HEAVY BODIED PRODUCTS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SPRAY GUN STRAINERS AND LINERS - 920-865. MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Finishing Supplies - Touch Up
|
HVLP GRAVITY FEED SPRAY GUN
|
| Hvlp Gravity Feed Pro Spray Gun Kit
...plus other(s)
|
THE AOM® HVLP GRAVITY FEED PRO SPRAY GUN REQUIRES LESS AIR PRESSURE TO ATOMIZE THE FINISH. SPRAYING WITH LESS AIR PRESSURE HAS THE ADVANTAGES OF LESS OVERSPRAY, LESS WASTE AND GREATER CONTROL FOR THE FINISHER. THIS IS ACCOMPLISHED BY THE FINISH FEEDING FROM THE TOP OF THE GUN THUS ELIMINATING A SIPHON ACTION REQUIRED BY A CONVENTIONAL TYPE SIPHON GUN. THESE GUNS FEATURE ALL STAINLESS STEEL FLUID PASSAGES FOR MORE WATER AND SOLVENT RESISTANCE. THE AIR CAPS ARE DESIGNED WITH MORE AIR HOLES THAN MOST GUNS FOR GREATER ATOMIZATION, ESPECIALLY DESIRABLE FOR WATER BASED FINISHES:
GUN WITH CUP AND REGULATOR WEIGHS APPROXIMATELY 1-1/2 LBS. AIR CONSUMPTION OF 6CFM@ 29 PSI; FOR USE WITH MANY 2-3 HP COMPRESSORS. HVLP GRAVITY FEED PRO SPRAY GUN KIT INCLUDES A HVLP GRAVITY FEED PRO SPRAY GUN WITH 1.3 AND 1.5MM STAINLESS FLUID SETS, 600CC (20-1/4 OZ.) NYLON CUP, DELUXE MINI REGULATOR, REPAIR KIT, STRAINERS, CLEANING BRUSH, WRENCH AND STORAGE CASE. ITALY.
FOR A LIMITED TIME -BUY A HVLP GRAVITY FEED SPRAY GUN PACKAGE FOR THE SAME PRICE AS THE KIT!
YOU GET THE SAME HVLP GRAVITY FEED PRO SPRAY GUN WITH BOTH 1.3 AND 1.5MM STAINLESS FLUID SETS PLUS GET (2) - 600CC (20-1/4 OZ.) FLUID CUPS (1- NYLON AND 1- ALUMINUM CUP), DELUXE MINI REGULATOR, FEMALE AIR LINE QUICK DISCONNECT, REPAIR KIT, STRAINER, CLEANING BRUSH, WRENCH AND STORAGE CASE. OFFER VALID 11-5-2011 THROUGH 12-31-11.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
ASTURO CART MOUNTED, AIR ASSISTED AIRLESS SPRAY SYSTEM SPECIFICALLY ENGINEERED FOR WOODWORKING PROFESSIONALS
|
| Asturo K20 Cart Mount Spray System
|
PERFECT FOR ALL WOOD COATINGS, LACQUERS, POLYURETHANES, WATERBORNES AND MUCH MORE, THE ASTURO K20 CART MOUNTED SPRAY SYSTEM OPERATES USING A VERY QUIET AND EFFICIENT 20:1 AIR POWERED PISTON PUMP - 3.75 CFM @ 20-115 PSI, 0.4 CFM DELIVERY RATE:
PUMP SIZE ALLOWS FOR EASY CHANGES OF COATINGS AND CLEAN-UP. 20:1 PUMP RATIO HANDLES HIGH VISCOSITY COATINGS WITHOUT NEED OF DILUTION, FURTHER REDUCING VOC EMISSIONS. PUMP HAS TEFLON® PISTON PACKING, HARD CHROME OVER STAINLESS STEEL ROD AND CYLINDER, TUNGSTEN CARBIDE CHECK BALLS AND SEATS AND SIPHON SET FOR 5 GALLON PAIL INCLUDING STAINLESS STEEL PICKUP TUBE. K1 MANUAL PRODUCTION GUN MIXES AIR WITH THE FLUID AT THE POINT OF ATOMIZATION ALLOWING FOR A STABLE AND EVEN SPRAY PATTERN PRODUCING A UNIFORM FILM BUILD-UP. VARIABLE FAN ADJUSTMENT PLUS PATTERN SIZE CONTROL GREATLY REDUCE MATERIAL WASTE AND DOWNTIME FOR TIP CHANGES (KN511 0.011, 50° TIP PRODUCES 10-11" PATTERN @ 12"). 55-0425 25' X 1/4" RUBBER AIR HOSE, 10-425 25' X 3/16" HIGH PRESSURE FLUID HOSE, CLEAR HOSE JACKET AND PRESSURE GAUGES INCLUDED. DUAL PNEUMATIC TIRE CART IS 23" X 19.3" X 39"; PUMP CAN BE REMOVED FROM CART AND WALL MOUNTED USING BRACKET PROVIDED. 55 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. MACHINED IN ITALY. ASSEMBLED AND SPRAY TESTED IN USA.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
A.O.M HVLP SYSTEMS DELIVER BEAUTIFUL FINISHES USING YOUR AIR COMPRESSOR
|
| Aom Hvlp R-series Spray Gun Only
...plus other(s)
|
BY TEAMING UP AN A.O.M. HVLP SPRAY GUN AND PRESSURE FEED POT YOU CAN REDUCE OVERSPRAY WHILE SPRAYING FASTER WITH FEWER REFILLS USING THICKER COATINGS THAT MOST HVLP SIPHON GUNS WILL NOT BUDGE - LESS OVERSPRAY ALSO MEANS LESS MATERIAL WASTE, SAVING YOU MONEY:
PROFESSIONAL R-SERIES HVLP SPRAY GUN FEATURES LOW 5 CFM AIR REQUIREMENT AT ONLY 30 PSI INPUT AND STAINLESS STEEL INTERNAL PARTS FOR LONGER LIFE (MANY 2HP COMPRESSORS DELIVER 5 CFM OUTPUT). FULLY ADJUSTABLE FLUID AND AIR CONTROLS GIVE YOU FINE-TO-WIDE PATTERN CONTROL. INCLUDES 1.4MM LACQUER FLUID SETUP. FOR PAINT AND HEAVIER FINISHES USE THE OPTIONAL 1.7MM HIGHER VISCOSITY FLUID SETUP. PORTABLE 2-QUART PRESSURE POT IS SEAMLESS, POLISHED ALUMINUM AND COMES WITH A PRESSURE REGULATOR, GAUGE AND LADDER HANGER/HANDLE. FOR EVEN LONGER DELIVERY TIMES, SELECT THE 2-1/4 GALLON HEAVY-DUTY PRESSURE POT. THIS HEFTY STEEL UNIT INCLUDES A PRESSURE REGULATOR, GAUGE, INTERNAL LINER FOR EASY CLEAN-UP AND FOUR STRONG WHEELS. COMPLETE HVLP PACKAGES COME WITH THE R-SERIES SPRAY GUN, APPROPRIATE PRESSURE POT AND 1/4" AIR AND SOLVENT RESISTANT FLUID HOSES W/CLEAR JACKETS. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
COMPLETE HVLP SPRAY SYSTEM IS LIGHTWEIGHT AND POWERFUL
|
| Earlex Spray Gun Cup Only
...plus other(s)
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
SPRAY ALMOST ANY LATEX PAINT, STAIN OR FINISH WITH LESS OVERSPRAY
|
| Pressure Feed Hvlp Spraygun
|
FINALLY, HERE'S A QUALITY SPRAY GUN THAT ALLOWS YOU TO APPLY MULTIPLE FINISHESEVEN HIGHER VISCOSITY CATALYZED VARNISHES AND EVEN LATEX PAINTS WITH LESS THINNING. SIMPLY ADJUST THE PRESSURIZED 1 QUART CUP TO JUST THE RIGHT SETTING SO EVERY FINISH WILL SPRAY JUST RIGHT. THE PRESSURE TO THE CUP ACTUALLY MOVES THE FINISH THROUGH THE GUN INSTEAD OF USING THE OLD SIPHON METHOD. PLUS, HVLP MEANS LESS OVERSPRAY AND POLLUTION BECAUSE THE GUN USES LESS PRESSURE AT THE TIP.
GUN INCLUDES PROFESSIONAL QUALITY REGULATOR AND GAUGE. FULLY ADJUSTABLE FLUID AND FAN CONTROLS FOR A FINE TO EXTRA WIDE PATTERN. 1.7 NEEDLE, NOZZLE AND AIR CAP GOOD FOR ALMOST ALL COATINGS INCLUDING WATER BASE. MADE IN ITALY.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
NEW FUJI Q3 GOLD™ AND Q4 GOLD™ HVLP SPRAY SYSTEMS OFFER QUIET OPERATION AND SAVE YOU UP TO 50% IN FINISH
|
| Q3 Xpc Quiet 3-stage Hvlp Spray System
...plus other(s)
|
FUJI GOLD™ SPRAY SYSTEMS PROVIDE 50% NOISE REDUCTION COMPARED TO MANY MODELS. OVERSPRAY AND BOUNCE BACK IS CONSIDERABLY REDUCED FOR UP TO 50% SAVINGS IN MATERIALS COMPARED TO MANY CONVENTIONAL SPRAY GUNS. BOTH SYSTEMS INCLUDE EVERYTHING YOU NEED TO FINISH OR PAINT FURNITURE, CABINETRY AND TRIM. NO ADDITIONAL AIR CAPS OR NOZZLES ARE REQUIRED FOR MOST APPLICATIONS. BY CONTROLLING THE AMOUNT OF AIR AND PAINT YOU CAN EVEN USE THE SPRAY GUN LIKE AN AIRBRUSH FOR SUBTLE SHADING AND TOUCH-UPS.
FUJI Q3 GOLD™ HVLP SYSTEM:
THE Q3 IS A VERY POWERFUL YET QUIET, THREE-STAGE 120V TURBINE SYSTEM THAT GIVES EASY, PROFESSIONAL RESULTS WITH MOST FINISH, PAINT AND STAIN: AT ONLY 62 DB AT 15 FEET, THE Q3 IS JUST SLIGHTLY LOUDER THAN NORMAL CONVERSATION WHICH AVERAGES 60 DB. TURBINE DIMENSIONS ARE 14-1/2" X 11.5" X 9". WEIGHS 39 LBS.
FUJI Q4 GOLD™ HVLP SYSTEM:
THE Q4 IS SIMILAR TO THE Q3 BUT WITH 30% MORE POWERFUL. THE FOUR-STAGE TURBINE SYSTEM IS IDEAL FOR THOSE WHO OFTEN SPRAY PAINT OR JUST FINISH A LOT AND WANT TO KNOW THEY HAVE THE BEST, MOST POWERFUL SYSTEM: THE Q4 SOUND LEVELS ARE ONLY 61 DB AT 15 FEET FROM TURBINE. WEIGHS 40 LBS. ALL OF OUR NEW FUJI SYSTEMS INCLUDE THE LATEST XPC™ "NON-BLEED" SPRAY GUN THAT HAS BEEN RE-DESIGNED FOR A FULLY ADJUSTABLE SPRAY PATTERN WITH NON-CORROSIVE, STAINLESS STEEL COMPONENTS, INSULATED, GLASS-FILLED NYLON HANDLE THAT NEVER GETS HOT, 1 QT., QUICK RELEASE CUP, 2" ENGINEERED FOAM AIR FILTER, 25' X 3/4" DIA. HI-FLEX™ RUBBER HOSE, NEEDLE/NOZZLE, CLEANING BRUSH AND PAINT FILTER.
OPTIONAL ACCESSORIES INCLUDE:
MINI THREE CUP SET WHICH ALLOWS YOU TO REPLACE THE ONE QUART CUP FOR SMALL JOBS AND QUICK COLOR CHANGES. FLEXIBLE 6' WHIP HOSE ATTACHES TO THE STANDARD HOSE FOR EXTRA FLEXIBILITY AT THE GUN MAKING IT EASIER TO GET INTO TIGHT AREAS. DIAPHRAGM MAINTENANCE KIT INCLUDING (3) ONE WAY CHECK VALVES, (3) CUP GASKETS AND (3) DIAPHRAGMS TO HELP KEEP YOUR GUN LIKE NEW AND FINISHES FLOWING SMOOTHLY. BOTH SYSTEMS COME WITH A #4 NEEDLE/NOZZLE AND AIR CAP, WHICH ALLOW YOU TO SPRAY MOST FINISHES, STAINS AND PAINTS. FOR EVEN MORE PRECISION WITH THINNER WATER BASED COATINGS, TRY OPTIONAL #3 NOZZLE/NEEDLE/JET SETUP (156-542). FOR GREATER SPEED WHEN FINISHING WITH PAINTS AND HIGHER VISCOSITY CLEAR COATINGS TRY A #5 (156-548) OR THE LARGEST #6 (156-551) SETUP.
TWO YEAR MANUFACTURER'S WARRANTY. MADE IN CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
920-865 - SPRAY GUN STRAINERS - 920-865. 107-885 - MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
NEW FUJI G-XPC™ GRAVITY FEED HVLP SPRAY GUNS HAVE THE FEATURES DEMANDED BY PROS
|
| Fuji G-xpc Hvlp Gravity Feed Spray Gun
|
INDUSTRIAL RATED FUJI G-XPC™ HIGH VOLUME, LOW PRESSURE (HVLP) SPRAY GUNS WERE DEVELOPED TO MEET THE RISING DEMAND FOR A GRAVITY GUN THAT CAN BE USED WITH ANY HVLP TURBINE. THE GRAVITY SPRAYGUN HAS ALL THE FEATURES OF THE STANDARD FUJI XPC GUN INCLUDING THE PATTERN CONTROL KNOB TO ADJUST THE SIZE OF THE FAN. THE GT-X2 COMES WITH THE #4 AIRCAP INSTALLED. THIS IS THE MEDIUM OUTPUT SIZE, BEST FOR FINE FINISHING WITH LACQUERS, ENAMELS, POLYURETHANES, LATEX, WATER BASED COATINGS AND MORE. THE GRAVITY CUP IS 400CC (.85 PINT).
**NEW** THE CUP NOW USES PRESSURE FEED (PLUS GRAVITY) FOR FASTER COVERAGE. IT NOW HAS THE SAME ABILITIES AS OUR XPC SPRAYGUN. THIS SPRAYGUN IS ALREADY PROVING TO BE VERY POPULAR WITH BATHTUB AND AUTO REFINISHERS BUT IT IS ALSO PERFECT FOR CABINET SPRAYING TOO. CLEANING IS A SNAP! THE GUN DOES NOT HAVE TO BE CONNECTED TO THE HOSE OR TURBINE. HERE'S HOW PARTIALLY FILL THE CUP WITH SOLVENT WIND OUT THE FLUID KNOB AND PULL THE TRIGGER DIRECT THE FLUID STREAM INTO A CONTAINER AN EXCELLENT CHOICE FOR PROFESSIONAL USE OR EVEN FOR THE SERIOUS HOBBYIST. SORRY... FUJI ONLY MANUFACTURES THIS SPRAYGUN WITH THE 400CC SIZE CUP. CANADA.
FOR THE ACCESSORIES AND ADDITIONAL AIRCAPS TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FUJI GOLD QUIET XP3 SYSTEMS - 156-530. SPRAY GUN STRAINERS - 920-865. MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
NEW FUJI MINI-MITE XPC™ HVLP SPRAY SYSTEMS HAVE THE FEATURES DEMANDED BY PROS AT A NICELY AFFORDABLE PRICE
|
| Mini-mite 3 Xpc 3-stage Hvlp Spray Syst.
...plus other(s)
|
INDUSTRIAL RATED FUJI MINI-MITE XPC™ HIGH VOLUME, LOW PRESSURE (HVLP) SPRAY SYSTEMS ARE NOT ONLY REASONABLY PRICED BUT OFFER EXTRAS THAT MINIMIZE OVERSPRAY AND TURBULENCE. THEY ALSO COME WITH EASY PULL TRIGGERS AND STAY-COOL HANDLES FOR OPERATOR COMFORT PLUS DURABLE STEEL CASES. THESE ARE A LITTLE LOUDER THAN THE FUJI GOLD QUIET XPC SYSTEMS BUT ARE NOT ANY LOUDER THAN MOST HVLP SYSTEMS ON THE MARKET:
MINI-MITE 3 XPC™ IS POWERED BY A 120VAC, THREE STAGE TURBINE. THEY COME READY TO SPRAY MOST FINISHES WITH EASE. YOU WILL NOT BE REQUIRED TO PURCHASE ADDITIONAL NEEDLES OR AIRCAPS TO SPRAY AVERAGE VISCOSITY FINISHES. IF YOU ARE SPRAYING HEAVY FINISHES SUCH AS PAINT OR THINNER FINISHES SUCH AS WATER BASED YOU MAY WANT TO OPT FOR ADDITIONAL SIZES AIR CAP SETS FOR EVEN BETTER SPRAY PATTERNS WEIGHS 26.5 LBS. MINI-MITE 4 XPC™ IS SIMILAR BUT COMES WITH A FOUR STAGE TURBINE FOR THOSE WHO WANT EXTRA POWER - WEIGHS 27.5 LBS. BOTH MODELS INCLUDE THE REDESIGNED XPC "NON-BLEED" SPRAY GUNS™ FOR A FULLY ADJUSTABLE SPRAY PATTERN WITH INSULATED, GLASS-FILLED NYLON HANDLE THAT NEVER GETS HOT, 1 QT. QUICK RELEASE CUP, 2" ENGINEERED FOAM AIR FILTER, 25' X 3/4" DIA. HI-FLEX™ RUBBER HOSE, NEEDLE/NOZZLE, CLEANING BRUSH AND PAINT FILTER. XPC "NON-BLEED" SPRAY GUNS™ ARE ESPECIALLY SUITABLE FOR AUTOMOTIVE ENAMELS, CATALYZED LACQUERS, NITROCELLULOSE LACQUERS, WATER BASED LACQUERS, POLYURETHANES AND LATEX PAINTS. ALSO FINE FOR VARNISHES AND OIL PAINTS, POLYURETHANES, ETC.- INCLUDES #4 AIRCAP, 1.4MM (.055") MEDIUM OUTPUT. TWO YEAR MANUFACTURER'S WARRANTY. CANADA.
FOR ACCESSORIES AND ADDITIONAL AIRCAPS TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FUJI GOLD QUIET XP3 SYSTEMS - 156-530. SPRAY GUN STRAINERS - 920-865. MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
COMPLETE HVLP SPRAY SYSTEM IS LIGHTWEIGHT AND POWERFUL
|
| Earlex Hv5500 Hvlp Spray System
...plus other(s)
|
NOW YOU CAN APPLY A PROFESSIONAL LOOKING FINISH WITHOUT A LOT OF TRAINING OR DRAGGING AROUND A BUNCH OF HEAVY EQUIPMENT. THE PRO HVLP GUN FEATURES A FAST "PUSH N CLICK" 3 SPRAY PATTERN CHANGING SYSTEM, PAINT VOLUME CONTROL DIAL AND A DYNAMIC CONTROL ACTION TRIGGER. COMPLETE A MULTITUDE OF PROJECTS WITH A LARGE VARIETY OF MATERIALS INCLUDING THINNED LATEX, LACQUERS, URETHANES, VARNISHES, OILS, SHELLACS, STAINS, SEALERS, ENAMELS, GLAZES AND MANY MORE WITHOUT THE HEAVY OVERSPRAY OF A CONVENTIONAL SPRAY GUN. THE 2MM TIP INCLUDED WORKS WELL FOR AVERAGE VISCOSITY FINISHES. FOR THIN WATER BASE FINISH USE A 1.0MM OR 1.5MM NEEDLE AND FOR THICKER PAINT AND FINISH USE A 2.5MM. AN EXTRA LONG HANDLE MAKES MOVING THE SYSTEM A BREEZE AND THE BASE PROVIDES SAFE AND CONVENIENT STORAGE FOR THE SPRAY GUN, HOSE AND POWER CORD:
TOTALLY ADJUSTABLE FOR JUST THE RIGHT 1"- 12" SPRAY PATTERN AND MINIMAL OVERSPRAY. THE BEAUTIFULLY ANODIZED ALUMINUM SPRAY GUN IS COMPATIBLE WITH NEARLY ALL FINISHING MATERIALS AND HAS AN EASY TO CLEAN, ONE QUART TEFLON COATED MATERIAL CUP. HV5500 HVLP SPRAY STATION (160-352) INCLUDES A 650-WATT TURBINE THAT GENERATES 42 CFM AND 2.2 PSI, 13-FEET HOSE AND 5.5-FEET POWER CORD., SPRAY GUN, 2.0 MM STAINLESS STEEL NEEDLE AND FLUID TIPS, 1 QT. TEFLON COATED PAINT CONTAINER WITH QUICK RELEASE LEVER, VISCOSITY CUP, WRENCH, CLEANING KIT AND INSTRUCTIONS. HV5500 SPRAY STATION WITH TWO FLUID SETS (965-141) INCLUDES EVERYTHING IN 160-352 HAS BUT IN ADDITION INCLUDES A 1.5MM STAINLESS STEEL NEEDLE AND FLUID TIP FOR FINE FINISHING. CLEANING KIT INCLUDES 5 BRUSHES, 2 NOZZLE CLEANERS AND LUBRICANT. SHIPPING WEIGHT 12.2 LBS. INCLUDING GUN AND HOSE. MADE IN ENGLAND
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
HVLP GRAVITY FEED MINI SPRAY GUN KIT PROVIDES HIGH TRANSFER EFFICIENCY
|
| Hvlp Mini Spray Gun Package
|
THE AOM® HVLP GRAVITY FEED MINI SPRAY GUN IS SMALL ENOUGH TO GET INTO TIGHT AREAS BUT LARGE ENOUGH TO FIT COMFORTABLY IN YOUR HAND. IT REQUIRES LESS AIR PRESSURE TO ATOMIZE THE FINISH AND WORKS WELL WITH SMALLER COMPRESSORS. SPRAYING WITH LESS AIR PRESSURE HAS THE ADVANTAGES OF LESS OVERSPRAY, LESS WASTE AND GREATER CONTROL FOR THE FINISHER. THIS IS ACCOMPLISHED BY THE FINISH FEEDING FROM THE TOP OF THE GUN THUS ELIMINATING A SIPHON ACTION REQUIRED BY A CONVENTIONAL TYPE SIPHON GUN. THESE GUNS FEATURE A BUFFED (NON-SHINY) SURFACE WITH ALL STAINLESS STEEL FLUID PASSAGES FOR WATER AND SOLVENT RESISTANCE. THE AIR CAPS ARE DESIGNED WITH FOR FINE, COMPLETE ATOMIZATION, HIGHLY DESIRABLE FOR WATER BASED FINISHES:
GUN WITH CUP AND REGULATOR WEIGHS APPROXIMATELY 18OZ. APPROXIMATE AIR CONSUMPTION OF 4CFM@ 29 PSI INPUT. HVLP GRAVITY FEED MINI SPRAY GUN PACKAGE INCLUDES HVLP MINI SPRAY GUN WITH 1.0, 1.2 AND 1.5 MM STAINLESS FLUID SETS, 200CC (6.76 OZ.) NYLON CUP, DELUXE MINI REGULATOR, REPAIR KIT, CLEANING BRUSH, WRENCH AND STORAGE CASE. RECOMMENDED FOR MATERIAL UNDER 24 SECONDS ON A ZAHN 2 CUP, INCLUDING MOST PROFESSIONAL LACQUERS, POLY'S, STAINS AND WATER BASED FINISHES. ITALY.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
HVLP SPRAY PAINT GUN
|
| Hvlp Siphon Feed Spray Gun Kit
...plus other(s)
|
THE AOM® HVLP SIPHON FEED SPRAY GUN FITS COMFORTABLY IN YOUR HAND AND WORKS WELL WITH MANY 2-3 HP COMPRESSORS. SPRAYING WITH LESS AIR PRESSURE (HVLP) HAS THE ADVANTAGES OF LESS OVERSPRAY, LESS WASTE AND GREATER CONTROL FOR THE FINISHER. THESE GUNS FEATURE ALL STAINLESS STEEL FLUID PASSAGES FOR WATER AND SOLVENT RESISTANCE. THE AIR CAPS ARE DESIGNED WITH FOR FINE, COMPLETE ATOMIZATION, HIGHLY DESIRABLE FOR WATER BASED FINISHES:
SIPHON FEED SPRAY GUN KIT INCLUDES SPRAY GUN WITH 1.4, AND 1.8 MM STAINLESS FLUID SETS, 1 QUART CAM LOCK ALUMINUM CUP AND DELUXE MINI REGULATOR, CLEANING BRUSH, STRAINER AND WRENCH. GUN WITH CUP AND REGULATOR WEIGHS APPROXIMATELY 2.25LB. GUN MAY BE PURCHASED SEPARATELY FOR USE WITH A STANDARD CUP, 1 QT. PRESSURE CUP OR PRESSURE POT AND HOSES. APPROXIMATE AIR CONSUMPTION OF 6CFM@ 29PSI INPUT. RECOMMENDED FOR MOST PROFESSIONAL LACQUERS, POLY'S, STAINS AND WATER BASED FINISHES. DELUXE MINI REGULATOR ALLOWS MORE CONTROL OF THE AIR PRESSURE AT THE GUN. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
2-1/4 GALLON HEAVY-DUTY PRESSURE POT - 148-604.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
DELUXE MINI REGULATOR ALLOWS QUICK PRECISE AIR PRESSURE CONTROL
|
| Deluxe Mini Regulator
|
|
THE AOM® DELUXE MINI REGULATOR ALLOWS THE OPERATOR TO CONTROL THE INPUT AIR PRESSURE INTO THE SPRAY GUN OR AIR TOOL WITH ONE KNOB. GAUGE SHOWS AIR PRESSURE IN PSI. COMPLETE REGULATOR IS RUGGEDLY BUILT AND SMALL ENOUGH TO BE UNOBTRUSIVE. FITS MOST STANDARD 3/8" AIR INLETS.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
PRESSURE FEED HVLP SPRAYGUN AND FILTER
|
| Pressure Feed Hvlp Spraygun And Filter
|
THE FIVE-MICRON CAMPBELL HAUSFELD™ PA2121 IN-LINE AIR FILTER TRAPS MOISTURE AND FOREIGN MATTER TO EXTEND TOOL LIFE:
SEE-THROUGH BOWL WITH METAL GUARD ALLOWS EASY MONITORING OF FLUID LEVEL WHILE PROTECTING UNIT AGAINST IMPACT. QUICK-RELEASE BOWL AND QUARTER-TURN DRAIN ALLOW EASY MAINTENANCE. 57 SCFM @ 90 PSI - 150 PSI MAXIMUM PRESSURE. 3/8" FEMALE NPT PORTS. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
EARLEX 3500 W/ 1.5 & 2MM FLUID SETS
|
| Earlex 3500 Hvlp Spray Station
...plus other(s)
|
|
EARLEX 3500 W/ 1.5 & 2MM FLUID SETS EARLEX 1.5MM FLUID TIP/NOZZLE FOR 3500
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
EARLEX 6900 W/1.5MM & 2MM FLUID SETS
|
| 1.0mm Fluid Tip/needle
...plus other(s)
|
|
EARLEX 6900 W/1.5MM & 2MM FLUID SETS EARLEX 6900 HVLP SPRAY STATION
|
|
|
|
Advanced Search Tools
Browse
will