New Fuji PRO^™ high volume, low pressure (HVLP) spray guns still feature great performance, but have been redesigned to provide "non-bleed" operation - meaning air flows only when the trigger is pulled:

Fluid nozzle does not get hot, significantly reducing buildup on the nozzle.

Because hiss of air through gun is intermittent, it appears quieter when in use.

There is less blowing around of shop dust.

Fuji PRO^™ spray guns provide 50% noise reduction, compared to previous models. Overspray and bounceback are reduced by up to 80% - savings in materials can be as much as 50%. Both systems include everything you need to finish or paint furniture, cabinetry and trimwork. No additional air caps or nozzles required for most applications. By controlling the amount of air and paint you can even use the spray gun like an airbrush for subtle shading and touch-ups:

3003 Fuji Q3 PRO^™ HVLP System:

Quiet, three-stage turbine system - 120V, 101 cfm @ 5 psi.

Designed for heavy duty use in fine finishing applications including water based lacquer, nitrocellulose lacquer, varnish, oil based paint, enamel and latex.

Includes XT "non-bleed" spray gun with insulated, glass-filled nylon handle that never gets hot, 1 qt. Teflon^® coated, quick release cup, 2" engineered foam air filter, 25' x 3/4" dia. Hi-Flex^™ rubber hose, needle/nozzle, cleaning brush and paint filter.

17-1/4" x 13" x 16-1/8".

Weighs 39 lbs.

3004 Fuji Q4 PRO^™ HVLP System:

Similar to Fuji Q3 PRO^™ but with quiet, four-stage turbine system that provides 30% more power than the Q3 PRO - ideal for those who often spray latex.

9080 - With the optional Mini Three Cup Set you can replace the one quart cup for small jobs and quick color changes.

2049F - Optional Flexible 6' Whip Hose attaches to the standard hose for extra flexibility at the gun - great when you need to get into tight areas.

2039 - Optional Diaphragm Maintenance Kit includes (3) one way check valves, (3) cup gaskets and (3) diaphragms to keep your gun operating like new.

Both guns come with #4 needle/nozzle and air caps, which allow you to spray most clear finishes, stains and paints. For even more precision with water based coatings, try optional #3 nozzle/needle/jet setup (9001-3) or #5 (9001-5) or #6 (9001-6) for greater speed when finishing with paints and higher viscosity clear coats.

Two year manufacturer's warranty.

Canada.

TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:

920-865 - Spray Gun Strainers And Liners - 920-865.

107-885 - Master Spray Gun Cleaning Kit - 107-885.