|
|
|
Bits Router/joinery/dovetail
|
FREUD® BUTTERFLY SPLINE BIT
|
| 1-1/8" Butterfly Spline Bit
|
|
THIS BIT PRODUCES A STRONG, ATTRACTIVE METHOD OF JOINING WOOD. USE A 14-DEGREE DOVETAIL BIT TO PRODUCE THE MATING GROOVES. CUTS ALL COMPOSITION MATERIALS, PLYWOODS, HARDWOODS, AND SOFTWOODS. USE ON CNC AND OTHER AUTOMATIC ROUTERS AS WELL AS HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/dovetail
|
BOSCH DOVETAIL ROUTER BITS
|
| 85240 1/2 Dovetail Bit Ct
|
CARBIDE TIPPED BOSCH 85240M DOVETAIL ROUTER BITS PRODUCE SMOOTH, INTRICATE DOVETAIL JOINTS:
CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AND CNC AND OTHER AUTOMATIC ROUTERS. 1/2" FLUTE LENGTH; 1/4" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
CUT PRECISE JOINTS "RIGHT OUT OF THE BOX" USING PORTER-CABLE® SERIES 4200 DOVETAIL JIGS
|
| 13/32" X 1" Straight Bit, 1/2" Shank
...plus other(s)
|
THERE'S NO ASSEMBLY REQUIRED WITH THESE REDESIGNED PORTER-CABLE® DOVETAIL JIGS - TAKE ONE OUT OF THE BOX, CLAMP IT ONTO YOUR BENCH, PLUG IN YOUR ROUTER AND START MAKING DOVETAILS - 12" WIDE X 1/4" TO 1-1/8" THICK CAPACITIES:
136-262 MODEL 4210 - DOVETAIL JIG CUTS HALF BLIND, HALF BLIND WITH LIPPED FRONT AND DOVETAIL DADOES. INCLUDES 1/2" SHANK, 17/32" 7° CARBIDE TIPPED DOVETAIL ROUTER BIT, HALF BLIND AND DADO TEMPLATE, LOCK NUT AND TEMPLATE GUIDE. 136-265 MODEL 4212 - DELUXE DOVETAIL JIG HANDLES THROUGH DOVETAIL, BOX JOINT, HALF BLIND, HALF BLIND WITH LAPPED FRONT AND DOVETAIL DADOES. COMES WITH 1/2" SHANK, 17/32" 7° CARBIDE TIPPED DOVETAIL ROUTER BIT, 13/32" CARBIDE TIPPED STRAIGHT ROUTER BIT, HALF BLIND AND DADO TEMPLATE, THROUGH AND BOX TEMPLATE, TWO LOCK NUTS AND TWO TEMPLATE GUIDES. T-HANDLE HEX WRENCH AND INSTRUCTIONS ALSO INCLUDED. CNC MACHINED, SOLID ALUMINUM TEMPLATES HAVE PATENTED ALIGNMENT LINES FOR EASY POSITIONING - VERTICAL AND HORIZONTAL CAM LOCKING BARS HOLD WOOD IN PLACE. ROUTER BIT HEIGHT STOP SETS CUT DEPTH. OFFSET POSITIONING GUIDES ALLOW ONE PASS CUTTING OF HALF BLIND DOVETAILS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
KLICK™ AND S-KLICK™ BLIND FASTENERS
|
| Dovetail Bit For Klick Fasteners, 1/4"
...plus other(s)
|
|
SKLICK™ FASTENERS ARE DESIGNED FOR QUICK AND EASY "SNAP" MOUNTING OF MOLDINGS ONTO VARIOUS SURFACES:
|
|
|
|
Bits Router/joinery/dovetail
|
E-Z PRO™ DOVETAIL JIG SIMPLIFIES ROUTER CUT DOVETAILS
|
| 1/2" X 14 Deg Hss Dovetail Bit, 1/4" Sha
...plus other(s)
|
|
THE GENERAL® E-Z PRO™ DOVETAIL JIG CAN MAKE THROUGH OR HALF-BLIND DOVETAILS USING HAND HELD OR TABLE MOUNTED ROUTERS. SELF-ALIGNING DESIGN ENSURES THAT BOTH ENDS OF THE DOVETAIL JOINT WILL MATCH UP EVENLY EVERY TIME. JIG IS FREE STANDING - DOES NOT NEED TO BE FASTENED TO WORKBENCH. LETS YOU TAKE THE JIG TO THE WORK PIECE. ACCOMMODATES BOARDS OF ANY WIDTH AND 1/2" TO 5/8" THICK. CAN BE ADJUSTED TO ALLOW FOR LOOSE OT TIGHT-FITTING JOINTS. STURDY MACHINED ALUMINUM CONSTRUCTION, WITH NO ASSEMBLY REQUIRED. INCLUDES ONE 14 DEGREE 1/2" TOP BEARING DOVETAIL ROUTER BIT WITH 1/4" SHANK NO TEMPLATE GUIDES ARE REQUIRED. JIG CAN ALSO BE USED TO CREATE BOX JOINTS. BOX JOINT BIT IS NOT INCLUDED.
|
|
|
|
Bits Router/joinery/dovetail
|
USE A PLUNGE ROUTER TO MAKE MORTISE AND TENON JOINTS
|
| 1/4" X 3" Hss Up Cut Spiral Router Bit
...plus other(s)
|
|
GENERAL E-Z PRO™ MORTISE & TENON JIG FOR PLUNGE ROUTERS. ACCOMMODATES STOCK FROM 1/2" TO 1-1/2" THICK. MAKE TENONS FROM 1" TO 3" WIDE. MAXIMUM TENON LENGTH IS 1-7/8". JIG USES SPIRAL BIT AND BUSHING SYSTEM TO MAKE 1/4", 3/8" AND 1/2" THICK TENONS. SERRATED CENTERING SYSTEM PROVIDES EXACT POSITION FOR 1/2", 3/4", 1", 1-1/4" AND 1-1/2" NET THICKNESS STOCK. BUSHING FITS IN A PORTER-CABLE® STYLE 1-1/8" HOLE SUB BASE. INCLUDES: JIG, HSS SPIRAL ROUTER BIT, BUSHING & 3 SLEEVES, BUSHING WRENCH AND MANUAL. ONE YEAR MANUFACTURER'S MATERIALS & WORKMANSHIP WARRANTY. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
FREUD® DOVETAIL ROUTER BITS
|
| 5/16" Dovetail-9 Degree-1/4"shk
...plus other(s)
|
CARBIDE TIPPED FREUD® DOVETAIL ROUTER BITS PROVIDE SMOOTH, INTRICATE DOVETAIL JOINTS AND ARE COMPATIBLE WITH MANY POPULAR DOVETAILING JIGS:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/dovetail
|
WOODTEK DOVETAIL ROUTER BIT
|
| 42521 3/8"dia.dovetail Bit
...plus other(s)
|
WOODTEK® CARBIDE TIPPED DOVETAIL ROUTER BITS PRODUCE SMOOTH, INTRICATE DOVETAIL JOINTS:
CUT ALL SOFT WOOD, HARDWOOD, PLYWOOD AND COMPOSITION MATERIALS. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
THE LEIGH 24" DOVETAIL JIG IS THE CORNERSTONE OF MULTI-FACETED JOINERY
|
| 8 Deg X 1/2" Dovetail Bit, 8mm Shank
...plus other(s)
|
COMBINE THE LEIGH D4R-24 DOVETAIL JIG WITH YOUR FAVORITE 1/2" OR 8MM COLLET ROUTER AND YOU CAN EASILY PRODUCE LARGE AND SMALL THROUGH, ANGLED THROUGH, HALF BLIND, RABBETED HALF BLIND, END-ON-END AND SLIDING DOVETAIL JOINTS:
JIG CAN ACCOMMODATE BOARDS UP TO 24" WIDE X 1-1/2" THICK WITH INFINITE PIN, TAIL WIDTH AND SPACING ADJUSTMENTS FOR A CLASSIC HAND CUT LOOK. INCLUDES 1/2" DIA. 8° DOVETAIL, 5/16" DIA. STRAIGHT AND 1/2" DIA. 14° DOVETAIL BITS (8MM SHANKS), 7/16" O.D. UNIVERSAL GUIDE BUSHING, 1/2"-TO-8MM COLLET REDUCER, USER GUIDE, INSTRUCTIONAL DVD, CAM-ACTION SPEED CLAMPS, CROSSCUT/SLIDING DOVETAIL GUIDE BAR, SQUARE DRIVER AND ASSEMBLY WRENCH. REQUIRES 7/16" AND 5/8" BUSHINGS (NOT INCLUDED).
M2 LEIGH MULTIPLE MORTISE AND TENON ATTACHMENT ATTACHES DIRECTLY TO THE D4R-24 AND REPLACES DOVETAILING FINGERS SO YOU CAN CUT PERFECT MULTIPLE MORTISE AND TENON JOINTS FROM 5/16" X 5/8" TO 1-1/2" X 2-1/2": CUSTOMIZE THE FIT AND DESIGN TO SUIT YOUR REQUIREMENTS AND SELECT FROM THREE CORNER RADII (5/32", 1/4" OR SQUARE (WITH CHISELING). 1/2" HSS SPIRAL UPCUT BIT AND INSTRUCTIONS INCLUDED.
ISOLOC TEMPLATES ARE PRECISION CNC-MACHINED ALUMINUM ALLOY AND COME WITH AN INSTRUCTION MANUAL AND PATENTED 5-PIECE VGS VARIABLE TEMPLATE GUIDEBUSH SYSTEM WITH NOMINAL 1/2" OD GUIDE.
AC-D24 ROUTER BIT AND VACUUM ATTACHMENT ACCESSORY KIT AND THE VRS-D24 VACUUM AND ROUTER SUPPORT PROVIDE CONVENIENCE AND VERSATILITY.
FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Bits Router/joinery/dovetail
|
WOODTEK TOP BEARING ROUTER BIT FOR JOINERY OR ARCHITECTURAL DETAIL
|
| 1/2"dovetail Pattern Bit
...plus other(s)
|
TOP BEARINGS LET YOU USE WOODTEK® CARBIDE-TIPPED PATTERN MAKING ROUTER BITS WITH TEMPLATES PLACED ON TOP OF THE WORKPIECE. YOU CAN SIGHT YOUR CUT LINE CLEARLY AND WORK WITH MORE CONTROL - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/joinery/drawer Lock
|
PORTER CABLE® 2" DRAWER LOCK ROUTER BIT
|
| 2" Drawer Lock Bit 43510pc
|
|
USED TO JOIN FRONTS AND SIDES OF DRAWERS. FOR USE IN 1/2" THICK STOCK. MONSTER-CARBIDE™ TIPS RESULT IN BETTER HEAT AND FORCE DISTRIBUTION TO GENERATE LESS FRICTION AND RUN COOLER. THIS PROVIDES SMOOTHER CUTS AND ALLOWS A FASTER FEED RATE. CARBIDE THICKNESS ALSO ALLOWS BIT TO BE RESHARPENED MORE TIMES THAN STANDARD CARBIDE. POZI-STOP™ SHANK AUTOMATICALLY LOCATES BIT AT CORRECT HEIGHT IN COLLET - NO TEST CUTS NEEDED. SWITCHING BETWEEN BITS DURING A PROJECT IS FAST AND EASY SINCE BITS WILL ALWAYS BE AT EXACTLY THE SAME HEIGHT. THIS CREATES A STRONGER, LONGER-LASTING BIT WITH LESS VIBRATION PRODUCING SMOOTHER CUTS. USE IN TABLE MOUNTED ROUTER. MADE IN USA.
|
|
|
|
Bits Router/joinery/drawer Lock
|
FREUD® DRAWER JOINT ROUTER BITS
|
| Drawer Lock Bit 1/4" Shank
...plus other(s)
|
FREUD® CARBIDE TIPPED DRAWER JOINT ROUTER BITS MAKE TWO CUTS TO FORM A JOINT. ONE PIECE IS FED VERTICALLY; THE OTHER HORIZONTIALLY:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ITALY.
|
|
|
|
Bits Router/joinery/drawer Lock
|
WOODTEK DRAWER BOX LOCK JOINT ROUTER BIT
|
| 1/4"shank Drawer Lock Bit
...plus other(s)
|
RUN ONE PIECE HORIZONTALLY AND THE OTHER VERTICALLY USING WOODTEK® CARBIDE-TIPPED DRAWER LOCK ROUTER BITS FOR TIGHT JOINTS WITH GOOD STRUCTURAL INTEGRITY - USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/finger Joint
|
WOODTEK ADJUSTABLE FINGER JOINT ROUTER BIT
|
| Adjustable Box Joint Bit Assembly
|
EACH WOODTEK® CARBIDE-TIPPED ADJUSTABLE FINGER JOINT ROUTER BIT COMES WITH 7/8", 1-1/8" AND 1-3/8" BEARINGS FOR 1/2", 3/8" AND 1/4" DEPTHS OF CUT - 5/32" KERF; 5/32" FINGER THICKNESS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANK. IMPORTED.
|
|
|
|
Bits Router/joinery/finger Joint
|
WOODTEK ADJUSTABLE FINGER JOINT ROUTER BIT
|
| Adjustable Finger Joint Router Bit
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED ADJUSTABLE FINGER JOINT ROUTER BITS ARE PERFECT FOR JOINING WOOD END-TO-END OR EDGE-TO-EDGE - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. FULLY ADJUSTABLE. PRODUCE FINGER JOINTS UP TO 1-1/4" THICK:
MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANK. IMPORTED.
|
|
|
|
Bits Router/joinery/finger Joint
|
FREUD® FINGER JOINT ROUTER BIT
|
| Finger Joint Router Bit
|
THE CARBIDE TIPPED FREUD® FINGER JOINT ROUTER BIT IS IDEAL FOR JOINING WOOD EDGE TO EDGE OR END TO END. PRODUCES A JOINT STRONGER THAN THE WOOD ITSELF:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/glue Joint
|
WOODTEK REVERSIBLE GLUE JOINT ROUTER BIT
|
| Reversible Glue Joint
|
WOODTEK® CARBIDE-TIPPED REVERSIBLE GLUE JOINT ROUTER BITS ARE PERFECT FOR CUTTING SELF-ALIGNING JOINTS FOR USE WITH TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/glue Joint
|
FREUD® REVERSIBLE GLUE JOINT ROUTER BIT INCREASES GLUE SURFACE AREA
|
| Reversible Glue Joint Router Bit
|
THE CARBIDE TIPPED FREUD® #99-031 REVERSIBLE GLUE JOINT ROUTER BIT PLANES BOARDS TO A UNIFORM THICKNESS - ALIGN BIT TO CENTER OF BOARD, THEN REVERSE EACH BOARD FOR A PERFECT GLUE JOINT ("D" IS SHANK DIAMETER):
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
OL' YELLER™ REGULAR WOOD GLUE - 909-293.
|
|
|
|
Bits Router/joinery/glue Joint
|
WOODTEK TAPER GLUE JOINT ROUTER BIT
|
| 81242 Taper Glue Joint Bit
|
WOODTEK® CARBIDE-TIPPED TAPERED GLUE JOINT ROUTER BITS ARE PERFECT FOR CUTTING SELF-ALIGNING JOINTS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/keller Jig Bits
|
DOVETAIL YOUR NEXT WOODWORKING PROJECTS IN MINUTES WITH KELLER 15" DOVETAIL JIG SYSTEMS
|
| Replacement Dovetail Bit
...plus other(s)
|
WHETHER YOU ARE A PROFESSIONAL WOODWORKER OR A WEEKEND HOBBYIST, YOU'LL FIND THAT KELLER 15" DOVETAIL JIG SYSTEMS ARE EASY AND EFFICIENT AND PROVIDE PERFECT RESULTS:
934-385 - MODEL 1500 JOURNEYMAN COMBINES TAIL AND PIN TEMPLATES IN ONE, BACK TO BACK, 15" LONG PHENOLIC TEMPLATE. ROUT DOVETAILS IN ANY 1/8" TO 3/4" THICK STOCK. ECONOMICAL CHOICE FOR BEGINNER AND HOBBYIST SMALL TO MID-SIZED PROJECTS.
951-597 - USE THE MODEL 1601 PRO SERIES TO CUT FIXED OR VARIABLE WIDTH DOVETAILS, EVEN FOR ANGLED OR CURVED JOINTS. TWO, 16" LONG ALUMINUM TEMPLATES WORK ON ANY STOCK FROM 1/8" TO 3/4" THICK AND ARE GUARANTEED BY THE MANUFACTURER FOR 20 YEARS. DESIGNED FOR SMALL TO MEDIUM SIZE WOODWORKING PROJECTS.
BOTH JIGS INCLUDE ONE CARBIDE TIPPED 7/16" X 7°, 1/4" SHANK DOVETAIL BIT AND ONE CARBIDE TIPPED 5/8", 1/4" SHANK STRAIGHT BIT, BOTH WITH BALL BEARING GUIDES (NO BUSHINGS REQUIRED) AND COMPLETE INSTRUCTIONS. BOTH REQUIRE A SIMPLE, WOODEN MOUNTING BLOCK (NOT INCLUDED).
|
|
|
|
Advanced Search Tools
Browse
will
