|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® ADJUSTABLE RAIL & STILE SETS PERMIT BOTH COPE & STICK AND TRADITIONAL MORTISE & TENON JOINERY
|
| Adjustable Rail & Stile Set, Qtr-rnd
...plus other(s)
|
|
ADJUSTABLE STILE & RAIL BITS ACCOMMODATE STOCK FROM 5/8" TO 1-1/4". COPE CUTTER HAS FLUSH TOP TO PASS UNDER TENON AND ALLOW FOR EXTENDED TENON. ADJUSTABLE GROOVE CUTTER ACCOMMODATED PANEL EDGES FROM 7/32" TO 3/8". AVAILABLE IN 4 MOLDING DETAILS: QUARTER-ROUND, OGEE, BEAD, AND BEVEL. 2ND PROFILE CUTTER CAN BE ADDED FOR DOORS WITH 2 DECORATIVE SIDES. RABBET CUTTER AVAILABLE FOR GLASS PANEL DOOR JOINERY. EACH BIT INCLUDES SHIMS FOR FINE TUNING A JOINT FOR A CONTINUED PERFECT FIT. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. USE ON TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/door Construction/stile & Rail - Glass Door - Window
|
FREUD® ADJUSTABLE 3 PIECE DOOR SETS CAN BE USED TO BUILD DOORS UP TO 1-1/4" THICK AND WILL ACCOMMODATE MORTISE & TENON JOINERY
|
| Rabbet Cutter For Adjustable Door Set
...plus other(s)
|
ADJUSTABLE STILE & RAIL BITS ACCOMMODATE STOCK FROM 5/8" TO 1-1/4". COPE CUTTER WILL PASS UNDER TENON AND ALLOW FOR EXTENDED TENON. ADJUSTABLE GROOVE CUTTER ACCOMMODATED PANEL EDGES FROM 7/32" TO 3/8". AVAILABLE IN 4 RAISED PANEL STYLES: BEVEL, COVE, OGEE W/COVE EDGE, & OGEE W/BEVEL EDGE. 2ND PROFILE CUTTER CAN BE ADDED FOR DOORS WITH 2 DECORATIVE SIDES. RABBET CUTTER AVAILABLE FOR GLASS PANEL DOOR JOINERY. INCLUDES STILE AND RAIL BITS ALONG WITH A QUADRA-CUT™ PANEL RAISER IN A NESTED CASE. THICK CARBIDE TIPS FOR LONG LIFE. EACH SET INCLUDES RAISED PANEL DOORS MADE SIMPLE" CD. LIFETIME MANUFACTURERS WARRANTY. ITALY.
97-150 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" DIA. RAISED PANEL BIT 97-152 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" DIA. RAISED PANEL BIT 97-154 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH OGEE AND COVE EDGE 3-1/2" DIA. RAISED PANEL BIT 97-156 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" DIA. RAISED PANEL BIT AND COVE BACK CUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-158 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" DIA. RAISED PANEL BIT AND COVE BACK CUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-250 OGEE MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" RAISED PANEL BIT 97-252 OGEE MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" RAISED PANEL BIT 97-254 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE AND COVE EDGE 3-1/2" RAISED PANEL BIT 97-258 OGEE MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" RAISED PANEL BIT AND COVE BACKCUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-260 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE 3-1/2" RAISED PANEL BIT AND COVE BACKCUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-276 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE AND BEVEL EDGE 2-3/4" RAISED PANEL BIT 99-860 QUARTER-ROUND CUTTER USED TO ADD RAIL & STILE MOLDING DETAIL TO OPPOSITE SIDE OF DOOR. A GOOD SELECTION FOR DOORS WITH THICK FRAMES 99-861 OGEE CUTTER USED TO ADD RAIL & STILE MOLDING DETAIL TO OPPOSITE SIDE OF DOOR. A GOOD SELECTION FOR DOORS WITH THICK FRAMES 54-760 RABBET CUTTER USED TO CREATE RECESS FOR GLAZED DOORS. A GOOD SELECTION FOR UPPER CABINET DOORS
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Picture Framing - Picture Framing Tools
|
DESIGNER II™ GLASS CUTTERS OFFER PRECISION PERFORMANCE AND RELIABILITY
|
| Designer Glass Cutter
...plus other(s)
|
FLETCHER® "GOLD-TIP"® DESIGNER II™ FLUID DISPENSING GLASS CUTTERS FEATURE THE FIBERLOCK™ ANTI-LEAK, DISPENSING SYSTEM THAT LAYS DOWN A BEAD OF CUTTING FLUID WHILE SCORING. THE RESULT IS SMOOTH, FLAKE FREE SCORES ON FLAT, TEXTURED OR STAINED GLASS:
927-650 - MODEL 01-711 PENCIL GRIP WITH NARROW HEAD AND CLEAR PLASTIC BODY - 6-3/8" O.A.L. 927-657 - MODEL 01-714 PISTOL GRIP WITH NARROW HEAD AND CLEAR PLASTIC BODY - 6" O.A.L. EACH COMES WITH 140° TUNGSTEN CARBIDE CUTTING WHEEL THAT SNAPS INTO HARDENED STEEL HEAD THAT SWIVELS OR STAYS FIXED, BUILT-IN SOLID BRASS TAPPING BALL FOR EASY BREAK OUT AND EYE DROPPER FOR FILLING FLUID RESERVOIR (CUTTING FLUID NOT INCLUDED). 927-664 - ENVIROGOLD GLASS CUTTING FLUID (4 OZ.) - 100% NON-CORROSIVE, NON-FLAMMABLE SMOOTH SCORING OIL. USA.
|
|
|
|
Shaper Cutters
|
STRETCH YOUR EC260 STILE & RAIL SET WITH FREUD® GLASS DOOR SHAPER CUTTERS
|
| Glass Door Cutter, Ec-260 Ec-261 Ec-263
|
STACK CARBIDE TIPPED FREUD® OPT260 GLASS DOOR SHAPER CUTTERS ONTO THE SPINDLE WITH YOUR EC260 SET TO CUT RABBETS FOR GLASS PANELS AND MILL TONGUE AND GROOVE JOINTS:
2-53/64" OVERALL DIAMETER, 7/16" CUT DEPTH, 15/32" CARBIDE HEIGHT, 3/4" BORE DIA. FOR RABBETS, REPLACE THE BOTTOM CUTTER OF THE STICK (FEMALE) OF YOUR EC260 SET WITH THE SMALLER OPT260-2 CUTTER. REPLACE THE SMALLER GROOVE CUTTER OF THE COPE (MALE) SET WITH THE LARGER DIAMETER OPT260-1. FOR TONGUE AND GROOVE JOINTS REPLACE THE BOTTOM CUTTER OF THE EC260 STICK (FEMALE) SET WITH THE LARGER OPT260-1 CUTTER TO CUT THE TONGUE. USE BOTH CUTTERS OF THE COPE (MALE) SET, ADD THE SMALLER OPT260-2 CUTTER AND CUT A MATCHING GROOVE. RED, PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® RAIL & STILE DOOR SYSTEMS OFFER THE VARIETY REQUIRED BY PROFESSIONAL CABINETMAKERS
|
| Rail & Stile Set (rs 2000)
...plus other(s)
|
THE FREUD® SYSTEM FOR MAKING CABINET DOORS COMBINES THE FLEXIBILITY OF STANDARD INSERT TOOLING WITH THE PERFORMANCE OF RESHARPENABLE TICO™ MICROGRAIN CARBIDE KNIVES. THIS GIVES CABINETMAKERS THE ABILITY TO OFFER OVER 18 RAIL AND STILE CABINET DOOR PROFILES AT A FRACTION OF THE COST OF FIXED KNIFE CUTTERS:
RS1000 IS A BASIC SET THAT CONTAINS RS-S AND RS-R CUTTERHEADS, RS-K GROOVER AND RS-L GLASS DOOR AND BACK TENON KNIFE. RS2000 CONTAINS EVERYTHING IN RS1000 PLUS NINE DIFFERENT PAIRS OF RAIL & STILE PROFILE KNIVES (RS-A THROUGH RS-I). CUTTERHEADS HAVE 1-1/4" BORE; 4-7/16" OVERALL DIAMETER. SPECIAL FEATURES INCLUDE EASED PANEL SLOT EDGES TO PREVENT SPLINTERING AND IMPROVE FINISHING, ZERO DOWNTIME TO SWITCH FROM THE MOLDING CUT TO THE COPE CUT WITH MATCHED REVERSE SETS AND PROFILES THAT ALWAYS MATCH EVEN AFTER RESHARPENING. 3/4" SLEEVES, 5 PIECE SHIM SET, RAIL AND STILE SAMPLE AND COMPLETE INSTRUCTIONS INCLUDED. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
RAIL & STILE PROFILE KNIFE SETS - 829-330.
|
|
|
|
Shaper Cutters
|
PROFILE KNIVES FOR FREUD® RAIL AND STILE DOOR SYSTEMS
|
| Profile "a" Set Of 2
...plus other(s)
|
PANEL/GLASS PROFILE KNIVES (TWO PER SET) ARE DESIGNED FOR FREUD® RS1000 AND RS2000 RAIL AND STILE DOOR SYSTEMS:
ACCOMMODATE 3/4" TO 7/8" RAISED PANEL DOOR STOCK; 3/4" TO 13/16" GLASS PANEL DOOR STOCK. RESHARPENABLE TICO™ HIGH DENSITY CARBIDE. EASED PANEL SLOT EDGES PREVENT SPLINTERING AND IMPROVE FINISHING. PROFILES ALWAYS MATCH EVEN AFTER SHARPENING. ITALY.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.