|
|
|
Fasteners - Wood Screws
|
#4 X 5/8" FLAT HEAD STATUARY BRONZE WOOD SCREWS
|
| #3x5/8 Fl-ph Hdw Screws Stat Brnz
...plus other(s)
|
STATUARY BRONZE PLATED SCREWS MATCH DARK ANTIQUE HARDWARE FINISHES. IN PAST YEARS, FURNITURE HARDWARE WAS FINISHED IN STATUARY BRONZE. THIS FINISH LOOKED GREAT WITH TRADITIONAL FURNITURE DESIGNS AND FINISHES. OVER THE YEARS, STATUARY BRONZE SCREWS HAVE BECOME HARDER TO FIND, YET MOST OF THE HARDWARE IS STILL AVAILABLE:
USE THESE SCREWS FOR RESTORING OLDER FURNITURE OR CREATING NEW CLASSICS - FLAT AND PAN HEAD STYLES.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
HEAVY DUTY FURNITURE SWIVEL GLIDES
|
| Swivel Glide W/plate
|
FEATURING 1-1/2" LONG STEEL STUDS WITH 1-1/8" DIA. HIGH-DENSITY PLASTIC FEET, THESE FURNITURE SWIVEL GLIDES COME WITH 1-1/4" DIA. METAL MOUNTING PLATES WITH 3/8-16 THREADS:
INSTALLATION REQUIRES DRILLING 7/16" DIA. X 1-1/2" DEEP HOLES INTO LEGS IN ADDITION TO MOUNTING PLATE PILOT HOLES (SCREWS INCLUDED). NICKEL CHROME FINISH - BASE SWIVELS ABOUT 15° UNDER LOAD. SOLD IN BAGS OF FOUR. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
SELF LEVELING GLIDES FOR CHAIRS AND FURNITURE
|
| Superlevel Self Levelling Glide
...plus other(s)
|
AUTOMATICALLY ADJUST TO STOP WOBBLY TABLES, CHAIRS OR EQUIPMENT:
SUPER LEVEL™ MOUNTS TO TABLE BASES OR EQUIPMENT CASES BY 1/4-20X3/8" THREADED STUDS. SUPERLEVEL II™ MOUNTS WITH A 3M™ VHB ADHESIVE PAD. BOTH STYLES WILL ACCOMMODATE LOADS OF 125 LB. PER LEG OR 500 LB. PER TABLE. LEVELERS OPERATE AUTOMATICALLY NO MANUAL ADJUSTMENT NECESSARY TO ACCOMMODATE UP TO 1/4" OF "WOBBLE" BY MEANS OF A SPRING AND RAMP MECHANISM. BUILT TO LAST USING HIGH IMPACT PLASTIC AND STAINLESS STEEL COMPONENTS. CORROSION RESISTANT PARTS MAY BE USED INDOORS OR OUTDOORS. BASE DIAMETER IS 1.28" AND BOTH STYLES ARE NOMINALLY 1" INSTALLED HEIGHT. AVAILABLE IN BAGS OF 4.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
ADJUSTABLE FURNITURE GLIDES
|
| 1/4-20 Swivel Glide W/t-nuts
|
IDEAL LEVELERS FOR TABLES, CHAIRS OR ANY FURNITURE WITH ANGLED LEGS:
WHITE NYLON BASE WITH NICKEL PLATED METAL CAP. 1-1/4" DIAMETER BASE WITH 1" LONG 1/4-20 THREADED STUD. NYLON CAP HAS A 7/8" DIAMETER FOOTPRINT. SWIVEL UP TO 20° TO ACCOMMODATE UNEVEN SURFACES OR ANGLED LEGS. SOLD IN SETS OF 4 WITH 1/4-20 X 9/16" T-NUTS INCLUDED. FOR WOODEN LEGS, BORE A 5/16" DIAMETER X 1" HOLE TO MOUNT.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
INNOVATIVE ULTRA GLIDE™ LEVELERS ADD STRENGTH AND STABILITY TO THIN PANELS
|
| Ultra-glide Leveler 1/4-20 X 2" Oal
|
UNIQUE DESIGN ALLOWS USE IN COMPOSITE FURNITURE PANELS AS THIN AS 3/4" WITH ADDED RESISTANCE TO LATERAL (SLIDING) PRESSURE AND NO DROP OUT WHEN FURNITURE IS LIFTED:
ULTRA GLIDE™ LEVELERS MOUNT INTO A 5/16" X 1-1/2" DEEP BORE IN FURNITURE PANELS OR LEGS. UNLIKE STANDARD T-NUT LEVELERS, ULTRA GLIDE™ LEVELERS INSTALL USING A PROPELL NUT WITH LEFT-HAND KNIFE THREADS WHICH LOCK INTO THE MOUNTING SURFACE, ELIMINATING DROP OUT WHEN FURNITURE IS LIFTED. THE 1-1/2" LONG 1/4-20 THREADED STUD HAS A 5/16" DIAMETER STEEL PILOT SLEEVE AT THE TOP WHICH RIDES IN THE BORE AND PROVIDES LATERAL SUPPORT WHEN FURNITURE IS SLID ALONG THE FLOOR. 11/16" DIAMETER FOOT IS MOLDED TO THE STUD AND INCORPORATES A HEX SHAPE THAT ALLOWS ADJUSTMENT USING A 5/8" OPEN-END WRENCH. SOLD IN BAGS OF 10 COMPLETE LEVELERS. TAIWAN.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
ADJUSTABLE PLATED STEEL FURNITURE GLIDES.
|
| 1" Plated Glide W/ T-nut
...plus other(s)
|
ADJUSTABLE PLATED STEEL GLIDES PROTECT BOTH THE FURNITURE LEGS AND THE FLOOR. WITH 1" LONG STEEL STUDS AND 1-1/16" DIA. RUBBER FEET, PLATED STEEL FURNITURE GLIDES HELP PREVENT MARRING AND SCRATCHING:
INSTALLATION REQUIRES DRILLING 5/16" DIA. X 1-1/4" DEEP HOLES INTO LEGS. 1" DIA. METAL TEE NUTS WITH 1/4-20 THREADS INCLUDED. SOLD IN BAGS OF FOUR AND 100. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
SELF ADJUSTING FOREVERGLIDES® ELIMINATE FURNITURE WOBBLE
|
| 1-1/4" Forever Glide-dark Oak
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
SOLID BEECHWOOD MAKES THESE CASTERS ATTRACTIVE STANDOUTS FROM THE REST
|
| 2" Beechwood Swivel Plate Caster
...plus other(s)
|
YOU WON'T SEE METAL OR PLASTIC WHEELS WHEN YOU INSTALL SELBY TOMORROW'S CASTERS. THAT'S BECAUSE THESE CASTERS FEATURE WHEELS THAT ARE SOLID, FINISHED BEECHWOOD - TWO SIZES FOR VERSATILITY:
141-755, 141-758 - 2" OD CASTER W/TIRE X 7/8" WIDE, 2-5/8" OVERALL HEIGHT, 1-5/8" SQUARE PLATE, 350 LBS. LOAD CAPACITY PER SET OF 4 CASTERS. 141-761, 141-764 - 3" OD CASTER W/TIRE X 15/16" WIDE, 3-15/16" OVERALL HEIGHT, 2-3/8" SQUARE PLATE, 440 LBS. LOAD CAPACITY PER SET OF 4 CASTERS. NON-MARKING POLYURETHANE TIRE AND SOUND DEADENER. STEEL PLATE AND YOKE WITH BALL BEARING SWIVEL. AVAILABLE WITH OR WITHOUT TOE ACTION BRAKES.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
TWIN WHEEL NYLON CASTERS FEATURE PERFORMANCE AND DURABILITY FOR LIGHT DUTY APPLICATIONS
|
| 50mm Twin Wheel Caster-nylon-stem Mt
...plus other(s)
|
AVAILABLE IN TWO DIFFERENT STYLES, THESE TWIN-WHEEL CASTERS, ARE MADE FROM TOUGH NYLON FOR DURABILITY:
AVAILABLE WITH 5/16" X 1-1/2" STEM OR 1-1/2" SQUARE PLATE WITH 3/16" HOLES. STEEL SOCKETS INCLUDED WITH STEM MOUNT CASTERS. SCREWS NOT INCLUDED WITH PLATE MOUNT CASTERS. DESIGNED FOR USE ON OFFICE EQUIPMENT, FURNITURE AND UTILITY CARTS. NOT RATED FOR USE ON CHAIRS. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
MADICO® ULTIMATE FLOOR PROTECTION KIT™ PROTECTS A VARIETY OF FLOOR SURFACES
|
| Ultimate Floor Protection Kit-12 Pc
|
FELTAC™ FELT PADS PLUS SLIDEX™ HDPE (HIGH DENSITY POLYETHYLENE) PADS PLUS RUBBERIZED ANTI-SKID PADS GIVE YOU ALL THE OPTIONS YOU NEED TO PROTECT YOUR FLOORS:
FELTAC™ PADS ARE PRODUCED BY A UNIQUE MANUFACTURING PROCESS THAT COMBINES THE DURABILITY OF TIGHTLY WOVEN POLYESTER FIBERS WITH A DEEPLY INJECTED PVAC RESIN FOR STABILITY, A SOFT LOWER SURFACE AND A BONDED ADHESIVE THAT KEEPS THE PADS IN PLACE. FELTAC™ PSA PADS PROVIDE HARD WEARING AND LONG LASTING FLOOR PROTECTION, EVEN IF FLOORS AND PADS ARE WET. SUPER SLIDEX™ HIGH DENSITY POLYETHYLENE PADS HAVE A RIGID, SLIPPERY SURFACE THAT GLIDES EASILY OVER CARPETS AND RUGS. RUBBERIZED ANTI-SKID PADS KEEP FURNITURE IN PLACE ON NEARLY ANY FLOOR. SOLD IN A PACK OF 12 PADS, INCLUDING 4 EA 4" ROUND PSA FELT PADS, 4 EA 4" ROUND SLIDEX™ HDPE PADS AND 4EA 4" ROUND ANTI-SKID PADS. CANADA.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
MADICO® FELTAC™ PSA FELT PADS PROTECT HARD SURFACE FLOORS
|
| Feltac Sliders Super Pack - 104 Pc
|
MADE FROM TIGHTLY KNIT POLYESTER FIBERS, FELTAC™ FELT PADS STRIKE THE PERFECT BALANCE BETWEEN STABILITY AND DURABILITY:
MADICO'S UNIQUE MANUFACTURING PROCESS COMBINES A THICK UPPER LAYER OF DENSE POLYESTER FELT INJECTED WITH PVAC RESIN FOR STABILITY WITH A SOFT FELT LOWER LAYER THAT PROTECTS THE FLOOR FINISH. A PEEL-AND-STICK ADHESIVE IS BONDED TO THE TOP LAYER ENSURING THAT THE PADS REMAIN ATTACHED DURING REPEATED MOVING OF FURNITURE, EVEN IF THE FLOOR AND PADS ARE WET. NEUTRAL BEIGE COLOR BLENDS WITH ALL ENVIRONMENTS. SOLD IN A PACK OF 104 PADS: 1 EA 6" X 9" PSA CUT TO FIT PAD, 24 EA 3/4" PSA PADS, 24 EA 1-1/8" PSA PADS, 16 EA 1-1/2" PSA PADS, 9 EA 1-7/8" PSA PADS, 12 EA 1/2" X 2-5/8" PSA PADS AND 18 EA 1" SQUARE PSA PADS. CANADA
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
MADICO® FLOOR PROTECTION KIT HANDLES BOTH HARD SURFACES AND CARPETED FLOORS
|
| Feltac Plus Slidex Super Pack-121 Pc
|
FELTAC™ FELT PADS PROVIDE 'STAY IN PLACE' PROTECTION FOR HARD SURFACES AND SUPER SLIDEX™ HIGH DENSITY POLYETHYLENE PADS MAKE FURNITURE EASY TO MOVE ON CARPETED FLOORS:
FELT PADS ARE PRODUCED BY A UNIQUE MANUFACTURING PROCESS THAT COMBINES THE DURABILITY OF TIGHTLY WOVEN POLYESTER FIBERS WITH A DEEPLY INJECTED PVAC RESIN FOR STABILITY, A SOFT LOWER LAYER AND A BONDED ADHESIVE THAT KEEPS THE PADS IN PLACE. FELTAC™ PSA PADS PROVIDE HARD WEARING AND LONG LASTING FLOOR PROTECTION, EVEN IF FLOORS OR PADS ARE WET. NEUTRAL BEIGE COLOR BLENDA WITH ANY ENVIRONMENT. SUPER SLIDEX™ HDPE (HIGH DENSITY POLYETHYLENE) PADS HAVE A RIGID, SLIPPERY SURFACE THAT GLIDES EASILY OVER CARPETS AND RUGS. CUP STYLE AND FOAM BACKED PADS ACCOMMODATE A WIDE VARIETY OF FURNITURE LEGS. SOLD IN A 121 PC PACK, INCLUDING 8 EA 3" SQUARE SLIDEX™ FOAM BACKED PADS, 4 EA 3-1/2" ROUND CUP SLIDEX™ PADS, 12 EA 1-7/8" DIA. PSA FELT PADS, 48 EA 7/8" DIA. PSA FELT PADS, 32 EA 1-1/8" DIA. PSA FELT PADS, 16 EA 1-1/2" DIA. PSA FELT PADS, 1 EA 6" X 9" CUT-TO-FIT PSA FELT PAD. CANADA
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
INDUSTRIAL CASTERS HAVE CAPACITIES UP TO 255 POUNDS
|
| 3" Swivel Plate Caster
...plus other(s)
|
RUGGED AND EASY ROLLING, INDUSTRIAL CASTERS FEATURE HEAVY ZINC PLATE FINISH AND RUBBER WHEELS:
CHOOSE FROM SWIVEL, RIGID OR SWIVEL WITH BRAKE. 2" CASTERS HAVE 1/4" BOLT HOLES; 3" HAVE 5/16" HOLES; 4" HAVE 3/8" HOLES (BOLTS NOT INCLUDED).
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
EASILY MOVE FURNITURE AND EQUIPMENT OVER CARPETED FLOORS
|
| 1-1/2" Ball Caster-ant Brass-stem Mt
...plus other(s)
|
THESE METAL TREAD BALL CASTERS ARE THE ORIGINAL SHEPHERD® CASTERS- MANUFACTURED IN THE USA FOR OVER 50 YEARS:
DURABLE ZINC DIE-CAST CONSTRUCTION MAKE THESE THE IDEAL CASTERS FOR FURNITURE, STORE FIXTURES, MEDICAL EQUIPMENT AND OFFICE EQUIPMENT. SELF LUBRICATING ACETYL RESIN BEARING. NO EXPOSED AXLE TO COLLECT DEBRIS. HARD TREAD DESIGNED FOR USE ON CARPETED FLOORS. CASTERS SWIVEL EASILY BECAUSE THE PIVOT POINT IS BELOW THE CASTER'S CENTER OF GRAVITY. AVAILABLE IN ANTIQUE BRASS, BRIGHT BRASS OR BRIGHT CHROME FINISH. GRIP NECK STEM MOUNT - 5/16" X 1-1/2" (INCLUDES SOCKETS). 1-1/2" DIA. CASTERS HAVE 40 LBS. DYNAMIC LOAD RATING (NOT RATED FOR CHAIRS) 2" CASTERS ARE RATED AT 75 LBS. 2-1/2" CASTERS ARE RATED AT 100 LBS. USA
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
SHEPHERD®TWIN WHEEL CASTERS GIVE FURNITURE A CONTEMPORARY LOOK
|
| 2" Twin Wheel Caster-ant-brass-stem Mt
...plus other(s)
|
THE ENCLOSED AXLE OF THESE ATTRACTIVE CONTEMPORARY TWIN WHEEL CASTERS KEEPS FOREIGN MATTER OUT:
DURABLE ZINC DIE CAST BODY AND HOOD. CONCEALED AXLE PREVENTS ACCUMULATION OF DEBRIS. EACH 2" DIA. WHEEL MOVES INDEPENDENTLY, MINIMIZING RESISTANCE. 75 LBS. DYNAMIC LOAD. STEM MOUNT - 1-1/2" X 5/16" (SOCKETS INCLUDED). AVAILABLE IN THREE FINISHES, WITH OR WITHOUT BRAKES. USA
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
TWIN-WHEEL CASTERS HAVE TOUGH NYLON BODIES AND WHEELS
|
| S/m 2 1/16" Bright Brass Twin
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
MAGIC SLIDERS® MAKE MOVING FURNITURE AND APPLIANCES NEARLY EFFORTLESS
|
| 2" Round Magic Slider
...plus other(s)
|
TEFLON® COATED MAGIC SLIDERS® ALLOW YOU TO MORE EASILY MOVE FURNITURE, APPLIANCES, FILING CABINETS AND OTHER OBJECTS ON VIRTUALLY ANY TYPE OF FLOORING WITHOUT DAMAGING THE SURFACE:
AVAILABLE IN A VARIETY OF SIZES, SHAPES AND APPLICATIONS TO SUIT MOST SITUATIONS - EACH PACKAGE CONTAINS FOUR SLIDERS. 2" ROUND - REFRIGERATORS, SOFAS, TABLES, STOVES, BEDS, DRESSERS, WASHERS AND DRYERS (MOUNTING ADHESIVE INCLUDED). 3/4" ROUND - SMALL WOODEN LEG CHAIRS AND TABLES (MOUNTING SCREWS INCLUDED). 7/8" ROUND - SMALL WOODEN LEG FURNITURE SUCH AS CHAIRS OR TABLES (MOUNTING NAILS INCLUDED). 1-1/8" TO 1-1/4" ROUND - ROUND FURNITURE LEGS SUCH AS CHAIRS, STOOLS, FOLDING CHAIRS AND TABLES (MOUNT USING GRIP TIP™ EDGES). 2" X 2" X 2-1/2" TRIANGLE - DRESSERS, ARMOIRES, BOOKCASES, FILING CABINETS, NIGHT STANDS AND ENTERTAINMENT CENTERS WITH SQUARE, CORNER-BASED FEET (MOUNTING ADHESIVE INCLUDED). FOR FURNITURE THAT IS MOVED ON A ROUTINE BASIS, USE A CYANOACRYLATE GLUE OR EPOXY FOR MOUNTING. MAKE SURE THE SURFACES YOU MOVE ON ARE CLEAN, SO THE FINISH WON'T BE DAMAGED. DO NOT USE ON NEWLY FINISHED WOOD FLOORS UNTIL TOTALLY DRY (USUALLY 3 - 4 MONTHS). CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
J.E. MOSER'S® LIGHTNING BOND™ SUPER THICK INSTANT GEL GLUE - 913-721.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
DUNCAN PHYFE DINING TABLE PLANS
|
| Cast Brass Paw Foot Caster
...plus other(s)
|
COMPLETE, DETAILED PLANS TO BUILD A CLASSIC DUNCAN PHYFE DINING TABLE (LUMBER NOT INCLUDED):
FINISHED TABLE IS 20-1/2"H X 42"W X 96"L, FULLY EXTENDED. FOLDS TO 30". PLANS PROVIDE FOR THREE ADDITIONAL LEAVES. BUILDING PEDESTAL SUPPORTS AND LEGS REQUIRES ADVANCED WOODWORKING SKILLS. CAST, STAMPED OR PLAIN BRASS TOE CAPS ALLOW YOU TO CUSTOMIZE THE DESIGN.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
NYLON BUTTON GLIDES FOR DOORS AND DRAWERS
|
| Nylon Button Glide
|
NYLON BUTTON GLIDES EASILY INSTALL FIT INTO 1/4" HOLES INDOOR EDGES, CABINET FRAMES OR DRAWER BOTTOMS:
BUTTONS HAVE A 1/2" DIAMETER HEAD.MAKES OLD DRAWERS OR DOORS SLIDE LIKE NEW. WORKS WELL WITH WOOD OR METAL DRAWER SLIDES.ALSO EASE THE MOVEMENT OF WOODEN SLIDING DOORS.
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
ADD A TOUCH OF NOSTALGIA WITH THESE REPRODUCTION CASTERS
|
| 1-1/8" Wooden Wheel Caster-stm Mt
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
CASTER SUPPORT CLIPS
|
| Blk Caster Clip W/hole
...plus other(s)
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
CORNER CASTERS ADD MOBILITY TO WOODEN FRAME SOFAS AND CHAIRS
|
| Sofa Frame Caster
|
CORNER CASTERS FASTEN IN THE BOTTOM CORNERS OF UPHOLSTERED CHAIR AND SOFA FRAMES ELIMINATING THE NEED FOR CORNER BLOCKS:
STEEL BRACKET (.085" STEEL) STRENGTHENS THE FRAME. WHEEL IS BLACK PHENOLIC THERMOSET PLASTIC. 1-5/8" DIA.; EFFECTIVE HEIGHT IS 1-3/16". CAPACITY IS 290 LBS. PER SET (SCREWS NOT INCLUDED).
|
|
|
|
Hardware Casters And Glides - Furniture & Cabinet
|
WIDE TRACK CASTERS EASILY MOVE BED FRAMES ON CARPETED FLOORS
|
| 1/2 Wht Bed Leg Plstc Cstr Ins
...plus other(s)
|
|
THE WIDE TRACK OF THESE CASTERS MAKES MOVING HEAVY OBJECTS ACROSS CARPETED SURFACES MUCH EASIER THAN WITH STANDARD NARROW WHEEL CASTERS. TWO INCH DIAMETER WHEELS AND YOUR CHOICE OF 2-1/4" WIDTH OR 1-3/4" WIDTH. CROWNED WHEELS EASE TURNING. FULL SWIVEL IS ACHIEVED WHEN USED WITH941-747 PLASTIC CASTER INSERTS, DESIGNED TO FIT INTO BED FRAMES. CASTERS ARE SOLD EACH AND INSERTS ARE PACKED 4 PER BAG.
|
|
|
|
Hardware Casters And Glides - Tack-on Glides
|
FURNITURE TACK GLIDES
|
| 5/8" Gray Tack Glides
...plus other(s)
|
SIMPLY NAIL THESE GLIDES IN PLACE ON WOODEN LEGS FOR EASE OF MOVEMENT AND PROTECTION FOR HARD FLOORS.
LINEAR POLYMER BASE PROVIDES EASY GLIDING ON MOST HARD SURFACES. HELD IN PLACE BY 23/32" LONG TACK. AVAILABLE IN GRAY(TAUPE) OR WHITE IN 5/8" OR 3/4" DIAMETER. SOLD IN BAGS OF 100 PIECES. IMPORTED.
|
|
|
|
Hardware Casters And Glides - Tack-on Glides
|
NICKEL PLATED TACK GLIDES
|
| 7/8" Cushion Tack Glide
...plus other(s)
|
NICKEL PLATED STEEL FURNITURE TACK GLIDES RIDE SMOOTHLY ON A 7/8" DIA. BASES:
NAIL LENGTH IS 7/8"SIMPLY POUND INTO THE BOTTOM OF WOOD LEGS. SOLD IN BAGS OF 10 AND 100. IMPORTED.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS CABINET KNOBS FROM BRUSSO®
|
| Mini Solid Brass Cabinet Pull
...plus other(s)
|
BRUSSO® SOLID BRASS CABINET KNOBS ARE SIMPLE IN DESIGN, YET ELEGANT IN APPEARANCE:
FLATTENED DOME FACE IS RINGED BY A BAND SHAPED EDGE. MOUNTING TENON IS PRESSURE FITTED INTO BORED HOLE AND GLUED INTO PLACE. 108-422 - MC-422 5/16 DIA.; PROJECTS 5/16 - 3/16" DIA. MOUNTING TENON. 108-425 - MC-428 7/16 DIA.; PROJECTS 3/8 - 3/16 DIA. MOUNTING TENON. 108-428 - MC-432 9/16" DIA.; PROJECTS 1/2 - 5/16 DIA. MOUNTING TENON. 108-431 - MC-434 11/16 DIA.; PROJECTS 5/8 - 3/8 DIA. MOUNTING TENON. USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
CLEARANCE SELECTION OF AMEROCK® CABINET PULLS AND KNOBS
|
| 1-1/4" Sb Knob-oak Insert
...plus other(s)
|
|
ENHANCE THE BEAUTY OF CABINETS AND FURNITURE. 110-342, PULL, DIE CAST, 3" C/C; 4-1/4" O.A.L.; 15/16" PROJECTION 76268-OB, KNOB, 1-1/4" DIA.; 1-1/16" PROJECTION BP1420FWD, KNOB, 1-7/32" DIA; 15/16" PROJECTION. BP76268-BL14, KNOB, 1-1/4" DIA.; 1-1/16" PROJECTION. R10122, PULL, DIE CAST, 3" C/C; 5-1/8" O.A.L.; 1-1/8" PROJECTION. R10145, KNOB, 1-3/16" DIA.; 1-1/2" PROJECTION. R10191, KNOB, 1-1/4" DIA.; 1" PROJECTION. R10201, PULL, 3" C/C; 3-7/16" O.A.L.; 1-3/16" PROJECTION. R10207, PULL, 1-1/4" DIA.; 1" PROJECTION. R10208, PULL, 3" C/C; 5-1/16" O.A.L.; 1-1/8" PROJECTION. R10224, PULL W/KNOB, 3" C/C; 5-1/8" O.A.L.; 1-7/32" PROJECTION. R10269, PULL, 3" C/C; 5-7/8" O.A.L.; 1-3/8" PROJECTION. R10270, KNOB, 1-1/4" DIA.; 1" PROJECTION. R10272, KNOB, 1-1/4" DIA.; 1" PROJECTION. R40799, BACK PLATE, 1-1/2" DIA; 1/8" PROJECTION. R99848, KNOB, 1-1/4" DIA..; 1" PROJECTION LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
MISSION STYLING WITH SOUTHWESTERN INFLUENCE
|
| 1-1/4" Round Knob-antique Bronze
...plus other(s)
|
THREE FINISHES TO MATCH ANY DECOR. SCREWS INCLUDED.
LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
RUGGED, YET ELEGANT, KNOBS AND PULLS FOR ANY DECOR
|
| 1-5/8" Round Knob-antique Iron
...plus other(s)
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS PULLS WITH DECORATIVE BACKPLATES
|
| Ring Pull W/bkplt 7-5/8x1-7/8 Bpl
...plus other(s)
|
WITH BRIGHT POLISHED LACQUERED (BPL) OR ANTIQUE SATIN LACQUERED (ASL) FINISHES, VIOLA® SOLID BRASS PULLS WITH DECORATIVE BACKPLATES BRING A EUROPEAN FLAIR TO FURNITURE PROJECTS - ALL PROJECT 11/16":
115-850, 115-853 - RING PULLS 1-13/16"W WITH 7-5/8"L X 15/16"W BACKPLATES. 115-856, 115-859 - RING PULLS 1-1/4"W WITH 4-3/4"L X 3/4"W BACKPLATES. 115-877, 115-880 - PENDANT PULLS 3-1/4"L WITH 7-5/8"L X 7/8"W BACKPLATES. 115-883, 115-886 - PENDANT PULLS 2-1/4"L WITH 4-3/4"L X 7/8"W BACKPLATES. MOUNTING HARDWARE INCLUDED. SPAIN.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS RING PULLS WITH A EUROPEAN FLAIR
|
| Sb Ring Pull 1-1/4"w Bpl
...plus other(s)
|
VIOLA® SOLID BRASS RING PULLS ARE BOTH ATTRACTIVE AND PRACTICAL - MOUNT USING HANGER SCREW BUILT INTO BASE:
AVAILABLE IN BRIGHT POLISHED LACQUERED (BPL) OR ANTIQUE SATIN LACQUERED (ASL) FINISHES. 115-862, 115-868 - 1-1/4" X 1-1/4", 5/8" DIA. BASE, PROJECTS 1/2". 115-871, 115-874 - 1-3/4" X 1-3/4", 5/8" DIA. BASE, PROJECTS 1/2". 115-913, 115-916 - 1" X 1", 1/2" DIA. BASE, PROJECTS 7/16". 115-919, 115-922 - 5/8" X 5/8", 3/8" DIA. BASE, PROJECTS 7/16". SPAIN.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS PENDANT PULLS WITH BACKPLATES
|
| Drop Pull W/bkplt 7-5/8x7/8 Bpl
...plus other(s)
|
WITH BRIGHT POLISHED (BPL) OR ANTIQUE SATIN (ASL) LACQUERED FINISHES, VIOLA® SOLID BRASS PENDANT PULLS WITH BACKPLATES ARE PERFECT CHOICES WHEN ADDING DECORATIVE, BUT PRACTICAL, HARDWARE:
115-877 - 7-5/8 LONG X 7/8" WIDE, BPL. 115-880 - 7-5/8 LONG X 7/8" WIDE, ASL. 115-883 - 4-3/4" LONG X 7/8" WIDE, BPL. 115-886 - 4-3/4" LONG X 7/8" WIDE, ASL. MOUNTING HARDWARE INCLUDED. SPAIN.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
EUROPEAN SOLID BRASS PENDANT PULLS
|
| Drop Pull 55mm (2-1/4") Bpl
...plus other(s)
|
WITH BRIGHT POLISHED LACQUERED (BPL) OR ANTIQUE SATIN LACQUERED (ASL) FINISHES, VIOLA® SOLID BRASS PENDANT PULLS ARE PERFECT CHOICES WHEN ADDING DECORATIVE HARDWARE:
115-889, 115-892 - 2-1/2" LONG, 13/16" DIA. BASE, PROJECTS 9/16". 115-895, 115-898 (NOT SHOWN) - 1-3/8" LONG, 11/16" DIA. BASE, PROJECTS 9/16". MOUNTING HARDWARE INCLUDED. SPAIN.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS PATTERNED ROUND KNOBS
|
| Patterned Knob 40mm (1-9/16") Asl
...plus other(s)
|
ALTHOUGH DIFFERING IN SIZE, SOLID BRASS ROUND KNOBS HAVE THE SAME DISTINCTIVE, DETAILED PATTERN:
1-9/16", 1-3/8" AND 1-1/4" DIA. (MOUNTING HARDWARE INCLUDED). ANTIQUE SATIN LACQUERED FINISH. IMPORTED.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID PEWTER STYLIZED KNOBS AND PULLS
|
| Sol.pewter Acorn Knob 1-5/8" X 1"
...plus other(s)
|
|
THESE UNIQUE AND EXQUISITE ACORN, DOGWOOD AND LEAF DESIGNS USING LEAD-FREE SOLID PEWTER WILL ENHANCE THE FINEST CABINETS, DRAWERS OR FURNITURE. CHOOSE BETWEEN KNOBS OR PULLS (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
TIMELESS DESIGNS IN SOLID CAST BRONZE
|
| 1" Ball Knob Bronze Patina
...plus other(s)
|
SOLID, SAND CAST PULLS AND KNOBS ARE HAND FINISHED IN A DARK BRONZE PATINA WITH A SLIGHTLY DISTRESSED FINISH OR A SLEEK SATIN NICKEL:
10-32 TAPS (MOUNTING SCREWS INCLUDED) - 124-450 MOUNTS USING ENCLOSED WOOD SCREWS. 124-235, 124-238, 124-241, 138-053, 138-056, 138-059 - BASEPLATES MUST BE ORDERED SEPARATELY. DRAWER AND WIRE PULL WIDTHS ARE C/C. IMPORTED.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
DECORATIVE SOLID BRASS KNOBS FEATURE BRUSSO® QUALITY
|
| Solid Brass Knob-ck-101
...plus other(s)
|
BRUSSO® SOLID BRASS KNOBS ARE SUITABLE FOR CABINET DOORS OR DRAWERS. SOLD INDIVIDUALLY, EACH COMES WITH A MACHINE SCREW FOR THROUGH BOLTING:
129-950 MODEL CK-101 - 1-1/4" DIA, PROJECTS 1-3/16". 129-953 MODEL CK-102 - 1-1/4" DIA, PROJECTS 1-1/4". 129-956 MODEL CK-103 - 1-1/4" DIA, PROJECTS 1-5/16". 129-959 MODEL CK-104 - 1-1/4" DIA, PROJECTS 1-3/16". 129-962 MODEL CK-105 - 1-1/4" DIA, PROJECTS 1-5/16". USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
HIGHLY DISTINCTIVE ANTLER HOOKS, PULLS AND KNOBS LOOK LIKE THE REAL THING
|
| Faux Antler Robe Hook
...plus other(s)
|
MADE FROM THE FINEST EPOXY RESIN AVAILABLE, EACH ARTISTIC CASTING FAUX ANTLER HOOK, PULL AND KNOB IS INDIVIDUALLY CAST AND HAND FINISHED TO THE HIGHEST LEVEL OF REALISM - FEW CAN DISTINGUISH THE DIFFERENCE BETWEEN THE CAST PRODUCT AND THE REAL THING:
ALL COME WITH UNPOLISHED CENTERS AND COMBINE THE NATURAL BEAUTY OF ANTLER WITH ARTISTIC TALENT, CRAFTSMANSHIP AND MODERN TECHNOLOGY TO CREATE BEAUTIFUL HAND CAST AND PAINTED ACCESSORIES. 141-551 - ROBE HOOK. 4" LONG, 1-1/2" BURR DIAMETER, PROJECTS 2-1/2". 141-554 - SMALL PULL (LEFT FACING). 4-1/2" LONG, PROJECTS 2", 3-5/8" C/C. 141-557 - SMALL PULL (RIGHT FACING. 4-1/2" LONG, PROJECTS 2", 3-5/8" C/C. 141-560 - LARGE KNOB. 2-3/4" DIAMETER, PROJECTS 1". 141-563 - MEDIUM KNOB. 2" DIAMETER, PROJECTS 1-1/4". 141-566 - SMALL KNOB. 1-1/2" DIAMETER, PROJECTS 1-1/8". 141-569 - MINI KNOB. 1-1/8 DIAMETER, PROJECTS 1". METAL THREADED INSERTS AND MOUNTING SCREWS INCLUDED. MANUFACTURER WILL REPAIR OR REPLACE ANY ITEM FOUND TO BE DEFECTIVE. USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
BRUSSO® FLUSH MOUNT PULLS GIVE A CLEAN ELEGANT LOOK TO DOORS, DRAWERS AND CHESTS
|
| 1-1/4" Dia Flush Finger Pull
...plus other(s)
|
MACHINED FROM SOLID BRASS WITH A SATIN FINISH, BRUSSO® FLUSH MOUNT PULLS ARE MORTISED IN FOR A CLEAN APPEARANCE:
CP-125 - 1-1/4" OD; 1" DIA. BORE. CP-150 - 1-1/2" OD; 1-1/4" DIA. BORE. CP-175 - 1-3/4" OD; 1-1/2" DIA. BORE. CP-200 - 2" OD; 1-3/4" DIA. BORE. BORES SHOULD BE 1/2" DEEP. 0.090" TOP LIP. JB-766 BOX HANDLE FUNCTIONS AS A MINIATURE FINGER PULL - 3/4"H X 2-3/4"L X 3/8" THICK. SIMPLY MORTISE IN TO DEPTH OF COVE MOLDING. USE WOOD GLUE TO SECURE. USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
RETRO LOOK WITH CONTEMPORARY STYLING
|
| Glas Bin Pul 3"c/c Green/bn
...plus other(s)
|
COLORED GLASS BIN PULLS AND KNOBS FEATURE CONTEMPORARY TRIM IN BRUSHED NICKEL OR OIL RUBBED BRONZE FINISHES:
BIN PULLS ARE 3C/C, 3.75 L X 1.62 W; 1-5/16 PROJECTION. MUSHROOM KNOBS ARE 1.25 D X 1.12 H. ACORN KNOBS ARE 1 D X 1.75H. MOUNTING SCREWS INCLUDED.
|
|
|
|
Advanced Search Tools
Browse
will
