|
|
|
Finishing Supplies - Spray Equipment
|
NEW FUJI PRO™ HVLP SPRAY GUNS FEATURE "NON-BLEED" OPERATION
|
| Mini 3 Cup Set
...plus other(s)
|
|
|
|
Finishing Supplies - Spray Equipment
|
UPGRADES FOR OLDER, FUJI MIGHTY-MITE HVLP SPRAY GUNS
|
| Fuji #6 Cap For Spray Gun
...plus other(s)
|
INCREASE THE PERFORMANCE OF YOUR OLDER MODEL FSG-2051 FUJI MIGHTY-MITE HVLP SPRAY GUN WITH FACTORY ORIGINAL REPLACEMENT PARTS:
808-925, 808-932, 808-939 - #6 (0.110"/3MM) SPRAY CAPS, FLUID JETS AND NEEDLES ARE DESIGNED FOR EXTRA HIGH OUTPUT AND FAST COVERAGE; USE FOR STONE FINISH PAINTS, TEXTURE COATING, INDUSTRIAL PRIMERS, LATEX ON WALLS AND CEILINGS. 808-904, 808-911, 808-918 - #5 (0.079"/2MM) SPRAY CAPS, FLUID JETS AND NEEDLES ARE DESIGNED FOR HIGH OUTPUT; USE FOR SEALERS, VARNISH, POLYURETHANE, OIL BASED PAINTS, ENAMELS. 808-883, 808-897 - #3 (0.039"/1MM) SPRAY CAPS AND NEEDLES ARE DESIGNED FOR FINE TO MEDIUM OUTPUT; USE FOR WATER BASED LACQUERS, LACQUERS, SEALERS, STAINS, VARNISH, PRIMERS. NOTE: FLUID JET AND NEEDLE SIZES MUST ALWAYS MATCH, EXACTLY. CANADA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
NEW FUJI Q3 GOLD™ AND Q4 GOLD™ HVLP SPRAY SYSTEMS OFFER QUIET OPERATION AND SAVE YOU UP TO 50% IN FINISH
|
| Q3 Xpc Quiet 3-stage Hvlp Spray System
...plus other(s)
|
FUJI GOLD™ SPRAY SYSTEMS PROVIDE 50% NOISE REDUCTION COMPARED TO MANY MODELS. OVERSPRAY AND BOUNCE BACK IS CONSIDERABLY REDUCED FOR UP TO 50% SAVINGS IN MATERIALS COMPARED TO MANY CONVENTIONAL SPRAY GUNS. BOTH SYSTEMS INCLUDE EVERYTHING YOU NEED TO FINISH OR PAINT FURNITURE, CABINETRY AND TRIM. NO ADDITIONAL AIR CAPS OR NOZZLES ARE REQUIRED FOR MOST APPLICATIONS. BY CONTROLLING THE AMOUNT OF AIR AND PAINT YOU CAN EVEN USE THE SPRAY GUN LIKE AN AIRBRUSH FOR SUBTLE SHADING AND TOUCH-UPS.
FUJI Q3 GOLD™ HVLP SYSTEM:
THE Q3 IS A VERY POWERFUL YET QUIET, THREE-STAGE 120V TURBINE SYSTEM THAT GIVES EASY, PROFESSIONAL RESULTS WITH MOST FINISH, PAINT AND STAIN: AT ONLY 62 DB AT 15 FEET, THE Q3 IS JUST SLIGHTLY LOUDER THAN NORMAL CONVERSATION WHICH AVERAGES 60 DB. TURBINE DIMENSIONS ARE 14-1/2" X 11.5" X 9". WEIGHS 39 LBS.
FUJI Q4 GOLD™ HVLP SYSTEM:
THE Q4 IS SIMILAR TO THE Q3 BUT WITH 30% MORE POWERFUL. THE FOUR-STAGE TURBINE SYSTEM IS IDEAL FOR THOSE WHO OFTEN SPRAY PAINT OR JUST FINISH A LOT AND WANT TO KNOW THEY HAVE THE BEST, MOST POWERFUL SYSTEM: THE Q4 SOUND LEVELS ARE ONLY 61 DB AT 15 FEET FROM TURBINE. WEIGHS 40 LBS. ALL OF OUR NEW FUJI SYSTEMS INCLUDE THE LATEST XPC™ "NON-BLEED" SPRAY GUN THAT HAS BEEN RE-DESIGNED FOR A FULLY ADJUSTABLE SPRAY PATTERN WITH NON-CORROSIVE, STAINLESS STEEL COMPONENTS, INSULATED, GLASS-FILLED NYLON HANDLE THAT NEVER GETS HOT, 1 QT., QUICK RELEASE CUP, 2" ENGINEERED FOAM AIR FILTER, 25' X 3/4" DIA. HI-FLEX™ RUBBER HOSE, NEEDLE/NOZZLE, CLEANING BRUSH AND PAINT FILTER.
OPTIONAL ACCESSORIES INCLUDE:
MINI THREE CUP SET WHICH ALLOWS YOU TO REPLACE THE ONE QUART CUP FOR SMALL JOBS AND QUICK COLOR CHANGES. FLEXIBLE 6' WHIP HOSE ATTACHES TO THE STANDARD HOSE FOR EXTRA FLEXIBILITY AT THE GUN MAKING IT EASIER TO GET INTO TIGHT AREAS. DIAPHRAGM MAINTENANCE KIT INCLUDING (3) ONE WAY CHECK VALVES, (3) CUP GASKETS AND (3) DIAPHRAGMS TO HELP KEEP YOUR GUN LIKE NEW AND FINISHES FLOWING SMOOTHLY. BOTH SYSTEMS COME WITH A #4 NEEDLE/NOZZLE AND AIR CAP, WHICH ALLOW YOU TO SPRAY MOST FINISHES, STAINS AND PAINTS. FOR EVEN MORE PRECISION WITH THINNER WATER BASED COATINGS, TRY OPTIONAL #3 NOZZLE/NEEDLE/JET SETUP (156-542). FOR GREATER SPEED WHEN FINISHING WITH PAINTS AND HIGHER VISCOSITY CLEAR COATINGS TRY A #5 (156-548) OR THE LARGEST #6 (156-551) SETUP.
TWO YEAR MANUFACTURER'S WARRANTY. MADE IN CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
920-865 - SPRAY GUN STRAINERS - 920-865. 107-885 - MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
NEW FUJI G-XPC™ GRAVITY FEED HVLP SPRAY GUNS HAVE THE FEATURES DEMANDED BY PROS
|
| Fuji G-xpc Hvlp Gravity Feed Spray Gun
|
INDUSTRIAL RATED FUJI G-XPC™ HIGH VOLUME, LOW PRESSURE (HVLP) SPRAY GUNS WERE DEVELOPED TO MEET THE RISING DEMAND FOR A GRAVITY GUN THAT CAN BE USED WITH ANY HVLP TURBINE. THE GRAVITY SPRAYGUN HAS ALL THE FEATURES OF THE STANDARD FUJI XPC GUN INCLUDING THE PATTERN CONTROL KNOB TO ADJUST THE SIZE OF THE FAN. THE GT-X2 COMES WITH THE #4 AIRCAP INSTALLED. THIS IS THE MEDIUM OUTPUT SIZE, BEST FOR FINE FINISHING WITH LACQUERS, ENAMELS, POLYURETHANES, LATEX, WATER BASED COATINGS AND MORE. THE GRAVITY CUP IS 400CC (.85 PINT).
**NEW** THE CUP NOW USES PRESSURE FEED (PLUS GRAVITY) FOR FASTER COVERAGE. IT NOW HAS THE SAME ABILITIES AS OUR XPC SPRAYGUN. THIS SPRAYGUN IS ALREADY PROVING TO BE VERY POPULAR WITH BATHTUB AND AUTO REFINISHERS BUT IT IS ALSO PERFECT FOR CABINET SPRAYING TOO. CLEANING IS A SNAP! THE GUN DOES NOT HAVE TO BE CONNECTED TO THE HOSE OR TURBINE. HERE'S HOW PARTIALLY FILL THE CUP WITH SOLVENT WIND OUT THE FLUID KNOB AND PULL THE TRIGGER DIRECT THE FLUID STREAM INTO A CONTAINER AN EXCELLENT CHOICE FOR PROFESSIONAL USE OR EVEN FOR THE SERIOUS HOBBYIST. SORRY... FUJI ONLY MANUFACTURES THIS SPRAYGUN WITH THE 400CC SIZE CUP. CANADA.
FOR THE ACCESSORIES AND ADDITIONAL AIRCAPS TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FUJI GOLD QUIET XP3 SYSTEMS - 156-530. SPRAY GUN STRAINERS - 920-865. MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Finishing Supplies - Turbine & Hvlp Spray Equipment
|
NEW FUJI MINI-MITE XPC™ HVLP SPRAY SYSTEMS HAVE THE FEATURES DEMANDED BY PROS AT A NICELY AFFORDABLE PRICE
|
| Mini-mite 3 Xpc 3-stage Hvlp Spray Syst.
...plus other(s)
|
INDUSTRIAL RATED FUJI MINI-MITE XPC™ HIGH VOLUME, LOW PRESSURE (HVLP) SPRAY SYSTEMS ARE NOT ONLY REASONABLY PRICED BUT OFFER EXTRAS THAT MINIMIZE OVERSPRAY AND TURBULENCE. THEY ALSO COME WITH EASY PULL TRIGGERS AND STAY-COOL HANDLES FOR OPERATOR COMFORT PLUS DURABLE STEEL CASES. THESE ARE A LITTLE LOUDER THAN THE FUJI GOLD QUIET XPC SYSTEMS BUT ARE NOT ANY LOUDER THAN MOST HVLP SYSTEMS ON THE MARKET:
MINI-MITE 3 XPC™ IS POWERED BY A 120VAC, THREE STAGE TURBINE. THEY COME READY TO SPRAY MOST FINISHES WITH EASE. YOU WILL NOT BE REQUIRED TO PURCHASE ADDITIONAL NEEDLES OR AIRCAPS TO SPRAY AVERAGE VISCOSITY FINISHES. IF YOU ARE SPRAYING HEAVY FINISHES SUCH AS PAINT OR THINNER FINISHES SUCH AS WATER BASED YOU MAY WANT TO OPT FOR ADDITIONAL SIZES AIR CAP SETS FOR EVEN BETTER SPRAY PATTERNS WEIGHS 26.5 LBS. MINI-MITE 4 XPC™ IS SIMILAR BUT COMES WITH A FOUR STAGE TURBINE FOR THOSE WHO WANT EXTRA POWER - WEIGHS 27.5 LBS. BOTH MODELS INCLUDE THE REDESIGNED XPC "NON-BLEED" SPRAY GUNS™ FOR A FULLY ADJUSTABLE SPRAY PATTERN WITH INSULATED, GLASS-FILLED NYLON HANDLE THAT NEVER GETS HOT, 1 QT. QUICK RELEASE CUP, 2" ENGINEERED FOAM AIR FILTER, 25' X 3/4" DIA. HI-FLEX™ RUBBER HOSE, NEEDLE/NOZZLE, CLEANING BRUSH AND PAINT FILTER. XPC "NON-BLEED" SPRAY GUNS™ ARE ESPECIALLY SUITABLE FOR AUTOMOTIVE ENAMELS, CATALYZED LACQUERS, NITROCELLULOSE LACQUERS, WATER BASED LACQUERS, POLYURETHANES AND LATEX PAINTS. ALSO FINE FOR VARNISHES AND OIL PAINTS, POLYURETHANES, ETC.- INCLUDES #4 AIRCAP, 1.4MM (.055") MEDIUM OUTPUT. TWO YEAR MANUFACTURER'S WARRANTY. CANADA.
FOR ACCESSORIES AND ADDITIONAL AIRCAPS TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
FUJI GOLD QUIET XP3 SYSTEMS - 156-530. SPRAY GUN STRAINERS - 920-865. MASTER SPRAY GUN CLEANING KIT - 107-885.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.