|
|
|
Machinery Accessories - Shapers
|
FREUD® SHAPER CUTTER 7-PIECE SHIM SET
|
| 7-piece Shaper Shim Set, 3/4" Bore
...plus other(s)
|
FREUD® PRECISION SHIM SET IS A QUICK AND EASY SYSTEM TO ADJUST CUTTER SPACING BY AS LITTLE AS .004" (1/250") UP TO .370".:
7 THICKNESSES: .004", .008", .012", .020", .040", .142" & .370". USE WITH STACKED CUTTERS FOR RAIL & STILE JOINERY. USE BETWEEN SHAPER CUTTERS AND RUB COLLARS. 3/4" BORE HAS 1-5/16" OD (OUTSIDE DIAMETER). 1-1/4" BORE HAS 1-7/8" OD (OUTSIDE DIAMETER). LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
STRETCH YOUR EC260 STILE & RAIL SET WITH FREUD® GLASS DOOR SHAPER CUTTERS
|
| Glass Door Cutter, Ec-260 Ec-261 Ec-263
|
STACK CARBIDE TIPPED FREUD® OPT260 GLASS DOOR SHAPER CUTTERS ONTO THE SPINDLE WITH YOUR EC260 SET TO CUT RABBETS FOR GLASS PANELS AND MILL TONGUE AND GROOVE JOINTS:
2-53/64" OVERALL DIAMETER, 7/16" CUT DEPTH, 15/32" CARBIDE HEIGHT, 3/4" BORE DIA. FOR RABBETS, REPLACE THE BOTTOM CUTTER OF THE STICK (FEMALE) OF YOUR EC260 SET WITH THE SMALLER OPT260-2 CUTTER. REPLACE THE SMALLER GROOVE CUTTER OF THE COPE (MALE) SET WITH THE LARGER DIAMETER OPT260-1. FOR TONGUE AND GROOVE JOINTS REPLACE THE BOTTOM CUTTER OF THE EC260 STICK (FEMALE) SET WITH THE LARGER OPT260-1 CUTTER TO CUT THE TONGUE. USE BOTH CUTTERS OF THE COPE (MALE) SET, ADD THE SMALLER OPT260-2 CUTTER AND CUT A MATCHING GROOVE. RED, PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® RAIL & STILE DOOR SYSTEMS OFFER THE VARIETY REQUIRED BY PROFESSIONAL CABINETMAKERS
|
| Rail & Stile Set (rs 2000)
...plus other(s)
|
THE FREUD® SYSTEM FOR MAKING CABINET DOORS COMBINES THE FLEXIBILITY OF STANDARD INSERT TOOLING WITH THE PERFORMANCE OF RESHARPENABLE TICO™ MICROGRAIN CARBIDE KNIVES. THIS GIVES CABINETMAKERS THE ABILITY TO OFFER OVER 18 RAIL AND STILE CABINET DOOR PROFILES AT A FRACTION OF THE COST OF FIXED KNIFE CUTTERS:
RS1000 IS A BASIC SET THAT CONTAINS RS-S AND RS-R CUTTERHEADS, RS-K GROOVER AND RS-L GLASS DOOR AND BACK TENON KNIFE. RS2000 CONTAINS EVERYTHING IN RS1000 PLUS NINE DIFFERENT PAIRS OF RAIL & STILE PROFILE KNIVES (RS-A THROUGH RS-I). CUTTERHEADS HAVE 1-1/4" BORE; 4-7/16" OVERALL DIAMETER. SPECIAL FEATURES INCLUDE EASED PANEL SLOT EDGES TO PREVENT SPLINTERING AND IMPROVE FINISHING, ZERO DOWNTIME TO SWITCH FROM THE MOLDING CUT TO THE COPE CUT WITH MATCHED REVERSE SETS AND PROFILES THAT ALWAYS MATCH EVEN AFTER RESHARPENING. 3/4" SLEEVES, 5 PIECE SHIM SET, RAIL AND STILE SAMPLE AND COMPLETE INSTRUCTIONS INCLUDED. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
RAIL & STILE PROFILE KNIFE SETS - 829-330.
|
|
|
|
Shaper Cutters
|
FREUD® PANEL RAISING SYSTEM
|
| Rp 2000 Complete Raised Panel Set
...plus other(s)
|
THE FREUD® RP2000 RAISED PANEL SYSTEM COMBINES THE FLEXIBILITY OF STANDARD INSERT TOOLING WITH THE PERFORMANCE OF RESHARPENABLE MICROGRAIN CARBIDE KNIVES, GIVING CABINET MAKERS THE ABILITY TO OFFER OVER 10 DIFFERENT STYLES OF RAISED PANEL CABINET DOORS AT A FRACTION OF THE COST OF FIXED KNIFE CUTTERS:
SET CONSISTS OF RP1000 RAISED PANEL HEAD, RP-OPS STRAIGHT PROFILE BACK CUTTER AND FIVE PROFILE KNIVES. RP-A, RP-B, RP-C, RP-D, RP-E PROFILE KNIVES ARE DESIGNED FOR RAISING 5/8" THICK PANELS WITH 1/4" TONGUES AND WILL REMOVE ALL SPLINTERS ON CROSS GRAIN CUTS. WILL ALSO RAISE 3/4" THICK PANELS WHEN USED WITH STRAIGHT PROFILE BACK CUTTER. 5-1/2" DIA. RAISED PANEL HEAD IS MADE FROM HIGH-GRADE AIRCRAFT ALUMINUM, SO WEIGHT IS KEPT TO A MINIMUM WHILE STRENGTH IS MAINTAINED - 1-1/4" BORE. STURDY CASE FOR CONVENIENT STORAGE INCLUDED. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
PROFILE KNIVES - 829-421.
|
|
|
|
Shaper Cutters
|
PROFILE KNIVES FOR FREUD® RAIL AND STILE DOOR SYSTEMS
|
| Profile "a" Set Of 2
...plus other(s)
|
PANEL/GLASS PROFILE KNIVES (TWO PER SET) ARE DESIGNED FOR FREUD® RS1000 AND RS2000 RAIL AND STILE DOOR SYSTEMS:
ACCOMMODATE 3/4" TO 7/8" RAISED PANEL DOOR STOCK; 3/4" TO 13/16" GLASS PANEL DOOR STOCK. RESHARPENABLE TICO™ HIGH DENSITY CARBIDE. EASED PANEL SLOT EDGES PREVENT SPLINTERING AND IMPROVE FINISHING. PROFILES ALWAYS MATCH EVEN AFTER SHARPENING. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® RAISED PANEL KNIFE SETS
|
| Raised Panel Cutter A, Bevel With Fillet
...plus other(s)
|
RAISED PANEL KNIFE SETS ARE DESIGNED FOR THE FREUD® RP2000 RAISED PANEL SYSTEM:
RESHARPENABLE, MICROGRAIN CARBIDE. LOCK INTO PLACE WITH 0.0008" PRECISION FOR A PERFECT MATCH EVERY TIME. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
RP2000 PANEL RAISING SYSTEM - 829-260.
|
|
|
|
Shaper Cutters
|
FREUD® DOOR LIP SHAPER CUTTER
|
| Door Lip Cutter, Qtr-rnd Detail & Rabbet
|
FREUD® DOOR LIP CUTTER IS DESIGNED FOR PARTIAL INSET CABINET DOORS. THE CUTTER IS DESIGNED FOR COUNTER-CLOCKWISE ROTATION WITH THE RABBET SIDE DOWN. THIS WILL ACCOMMODATE RAISED PANEL DOORS WHERE THE PANEL EXTENDS ABOVE THE FRAME. 7° BEVEL ON RABBET TO ACCOMMODATE DOOR SWING AND QUARTER ROUND DECORATIVE DETAIL.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. CUTTER DESIGNED FOR COUNTER-CLOCKWISE ROTATION. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® ROMAN OGEE SHAPER CUTTER
|
| Roman Ogee Cutter, 3/4" Bore
|
FREUD® ROMAN OGEE CUTTER OFFERS CLASSICAL STYLING FOR EDGE TREATMENTS. THE CUTTER CAN BE POSITIONED TO INCLUDE A TOP STEP IN THE PROFILE IF DESIRED.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. POSITING CUTTER TO ADD OR ELIMINATE TOP STEP DETAIL IN PROFILE. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® REVERSIBLE GLUE JOINT SHAPER CUTTER
|
| Glue Joint Cutter, 1-1/4 Max Thick Stock
|
FREUD® REVERSIBLE GLUE JOINT CUTTER PRODUCE A STRONG JOINT BY INCREASING GLUE SURFACE AREA. CUTTERS WILL ACCOMMODATE STOCK UP TO 1-3/8" FINISHED THICKNESS. POSITION CUTTER TO CENTER OF BOARD, CUT ONE EDGE AND REVERSE AND CUT OPPOSITE EDGE FOR PERFECT ALIGNMENT.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. FENCE AND SPINDLE HEIGHT POSITIONS ARE SAME FOR BOTH EDGE CUTS. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® WEDGE TONGUE AND GROOVE SHAPER CUTTERS
|
| Tongue Cutter, Wedge T&g 3/4" & 1" Stock
...plus other(s)
|
FREUD® WEDGE TONGUE AND GROOVE CUTTERS PRODUCE A JOINT THAT WILL FIND POSITION DURING ASSEMBLY. CUTTERS WILL ACCOMMODATE STOCK FROM 3/4" TO 1" FINISHED THICKNESS.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. FENCE AND SPINDLE HEIGHT POSITIONS ARE SAME FOR BOTH CUTTERS. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® LOCK MITER JOINT SHAPER CUTTER
|
| Lock Miter Set, 1" Max Thick Stock, 3/4"
|
FREUD® LOCK MITER JOINT CUTTER IS DESIGNED TO MAKE LOCK MITER JOINTS WITH EASE. CUT ONE BOARD VERTICALLY AND THE PIECE TO BE JOINED HORIZONTALLY. CUTTER WILL ACCOMMODATE STOCK UP TO 1" FINISHED THICKNESS. POSITION CUTTER TO CENTER OF HORIZONTALLY BOARD.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. FENCE AND SPINDLE HEIGHT POSITIONS ARE SAME FOR BOTH CUTS. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® COMBINATION ROUND OVER SHAPER CUTTER
|
| Combination Round Over Cutter 1/4 & 1/2"
|
FREUD® COMBINATION ROUND OVER CUTTER PROVIDES 4 PROFILES IN 1 CUTTER. THE CUTTER HAS A SMALL RADIUS OF 1/4" AND A LARGE RADIUS OF 1/2". BY SETTING THE CUTTER FOR A DEEPER CUT A FILLET CAN BE ADDED FOR A BEAD DETAIL.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. 2 RADIUSES WITH OR WITHOUT A FILLET FOR 4 SEPARATE PROFILES. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® MALE & FEMALE CABINET, INTERIOR AND EXTERIOR DOOR CUTTER SETS
|
| 1-3/8" Rail & Stile Set, Classic Detail
...plus other(s)
|
FREUD® MALE AND FEMALE DOOR CUTTER SETS ARE PERFECT FOR THE HIGH PRODUCTION NEEDS OF A CABINET OR DOOR SHOP:
EACH CUTTER IS BALANCED AND HAS THICK CARBIDE TIPS FOR MAXIMUM SHARPENING LIFE. SHIMS ARE INCLUDED TO ENSURE PERFECTLY FITTED JOINTS THROUGH MANY SHARPENINGS. CAN BE USED IN COMBINATION WITH OPT-260 (801-582) RABBET CUTTER (NOT INCLUDED) FOR GLAZED DOORS. PERMA-SHIELD™ COATING FOR REDUCED FRICTION AND SAFER OPERATION. ITALY.
|
|
|
Click for More Info
|
Shaper Cutters
|
FREUD® CONCAVE AND CONVEX RADIUS SHAPER CUTTERS
|
| 1/8 Radius Convex
...plus other(s)
|
THREE-WING FREUD® CONCAVE AND CONVEX RADIUS SHAPER CUTTERS ARE COMPUTER BALANCED FOR CONTINUOUS, PRODUCTION LEVEL USE:
CONCAVE CUTTER CARBIDE HEIGHTS RANGE FROM 5/8" TO 1-1/4"; CONVEX FROM 1/4" TO 3/4". 2-7/8" OVERALL DIAMETER - 3/4" BORE. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® STRAIGHT EDGE SHAPER CUTTERS
|
| 1/4" X 2-7/8" Straight Edge Cutter, 3/4"
...plus other(s)
|
FREUD® STRAIGHT EDGE CUTTERS ARE COMPUTER BALANCED FOR SUPER SMOOTH, CHATTER-FREE CUTTING. USE STRAIGHT PROFILE FOR MAKING PRECISE RABBETS AND DADOES, OR USE WITH A RUB COLLAR FOR PATTERN WORK.:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. SUITABLE FOR CUTTING HARDWOOD, SOFTWOOD AND COMPOSITION MATERIALS. USE WITH 72MM RUB COLLAR FOR PATTERN WORK. 3/4" BORE. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® CABINET DOOR RAIL & STILE SHAPER CUTTER SETS
|
| 3/4" Stock Rail & Stile Set, Qtr-rnd
...plus other(s)
|
|
FREUD® CABINET DOOR SETS ARE SIZED FOR 3/4" NET THICKNESS STOCK. THE DOOR FRAME WILL HAVE A DECORATIVE DETAIL ON ONE SIDE. 3 DECORATIVE DETAILS AVAILABLE: QTR-RND, OGEE AND BEAD. PERMA-SHIELD™ COATED FOR REDUCED FRICTION AND EASY PITCH REMOVAL. DESIGNED FOR CONTINUOUS PRODUCTION USE. SHIMS INCLUDED FOR PRECISE FITTING JOINTS. USE IN COMBINATION WITH OPT-260 RABBET CUTTER (801-582) (SOLD SEPARATELY)FOR GLAZED DOORS. USE RC-001 RUB COLLAR FOR CATHEDRAL TOP DOORS. ITALY
|
|
|
|
Shaper Cutters
|
FREUD® 1" THICK PASSAGE DOOR RAIL & STILE SHAPER CUTTER SET
|
| 1" Rail & Stile Set, Qtr-rnd Detail
...plus other(s)
|
|
FREUD® 1" THICK DOOR SET IS SIZED FOR 1" NET THICKNESS STOCK. THE DOOR FRAME WILL HAVE A DECORATIVE DETAIL ON TWO SIDES. 1 DECORATIVE DETAIL AVAILABLE: QTR-RND. PERMA-SHIELD™ COATED FOR REDUCED FRICTION AND EASY PITCH REMOVAL. DESIGNED FOR CONTINUOUS PRODUCTION USE. SHIMS INCLUDED FOR PRECISE FITTING JOINTS. USE RC-001 RUB COLLAR FOR CATHEDRAL TOP DOORS. ITALY
|
|
|
|
Shaper Cutters
|
FREUD® INTERIOR DOOR RAIL & STILE SHAPER CUTTER SETS
|
| 1-3/8" Rail & Stile Set, Bead Detail
...plus other(s)
|
FREUD® MALE AND FEMALE DOOR CUTTER SETS ARE PERFECT FOR THE HIGH PRODUCTION DOOR WORK:
2 DECORATIVE DETAILS AVAILABLE: BEAD AND OGEE W/FILLET & BEAD. THE DOOR FRAME WILL HAVE A DECORATIVE DETAIL ON TWO SIDES. EACH CUTTER IS BALANCED AND HAS THICK CARBIDE TIPS FOR MAXIMUM SHARPENING LIFE. SHIMS ARE INCLUDED TO ENSURE PERFECTLY FITTED JOINTS THROUGH MANY SHARPENINGS. CAN BE USED IN COMBINATION WITH RC-001 RUB COLLAR (SOLD SEPARATELY) FOR CATHEDRAL TOP DOORS. PERMA-SHIELD™ COATING FOR REDUCED FRICTION AND EASY PITCH REMOVAL. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® EXTERIOR DOOR RAIL & STILE SHAPER CUTTER SET
|
| 1-3/4" Rail & Stile Set, Bead Detail
...plus other(s)
|
FREUD® STILE AND RAIL DOOR CUTTER SETS ARE PERFECT FOR THE HIGH PRODUCTION DOOR WORK:
2 DECORATIVE DETAILS AVAILABLE: BEAD AND COVE W/FILLET & BEAD. THE DOOR FRAME WILL HAVE A DECORATIVE DETAIL ON TWO SIDES. EACH CUTTER IS BALANCED AND HAS THICK CARBIDE TIPS FOR MAXIMUM SHARPENING LIFE. SHIMS ARE INCLUDED TO ENSURE PERFECTLY FITTED JOINTS THROUGH MANY SHARPENINGS. CAN BE USED IN COMBINATION WITH RC-001 RUB COLLAR (SOLD SEPARATELY) FOR CATHEDRAL TOP DOORS. PERMA-SHIELD™ COATING FOR REDUCED FRICTION AND EASY PITCH REMOVAL. ITALY.
|
|
|
|
Shaper Cutters
|
FREUD® QUADRA-CUT® RAISED PANEL SHAPER CUTTERS FOR 5/8" STOCK
|
| Panel Raiser, Cove
...plus other(s)
|
CARBIDE TIPPED FREUD® QUADRA-CUT® RAISED PANEL SHAPER CUTTERS HAVE TWO SHEAR ANGLES TO MINIMIZE TEAR OUT AND GIVE A CRISP EDGE ON THE PANEL FIELD:
THE BULK OF THE MATERIAL IS REMOVED WITH THE "UP-SHEAR" LONG EDGE WHILE THE SHOULDER IS CLEANED UP WITH THE "DOWN-SHEAR" TIP EDGE. IT'S THE BEST OF BOTH WORLDS! BACKCUTTERS ALLOW USE OF PANEL CUTTERS ON 3/4" STOCK. ITALY.
|
|
|
|
Advanced Search Tools
Browse
will
