Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Sawblades (33)
Circular (33)
|
|
|
Sawblades - Circular
|
TEN MOST POPULAR FREUD® ROUTER BITS IN ONE HANDY SET
|
| Freud Lu97m010 10" Sawblade Tcg
...plus other(s)
|
|
|
|
Sawblades - Circular
|
FREUD® 8" STACKED DADO SET DOESN'T NEED SHIMS
|
| 8"dial A Width Dado System
|
NOT A WOBBLE DADO! CUTTING CLEAN, FLAT-BOTTOM DADOES IS A LOT EASIER WITH THE FREUD® MODEL SD608 8" DIAL-A-WIDTH DADO™ STACKED DADO SET:
IN THIS SET, SHIMS HAVE BEEN REPLACED WITH A PATENTED DIAL SYSTEM, WHICH ALLOWS YOU TO MICRO-ADJUST THE CUT WIDTH - EACH "CLICK" ADJUSTS THE BLADE 0.004". CUT CAPACITY WITH THE COMBINATION OF INCLUDED CHIPPERS IS FROM 1/4" TO 29/32". OVERSIZED TEETH ALLOW FOR LONGER CUTTING LIFE BETWEEN SHARPENINGS AS WELL AS MORE RESHARPENINGS - -5° HOOK ANGLE, 15° TOP BEVEL ANGLE, 5/8" ARBOR. MOUNTS EASILY WITH NO LOOSE COMPONENTS AND ADJUSTABLE HUB LETS YOU FINE TUNE WIDTH WITHOUT EVER REMOVING THE CUTTER FROM YOUR TABLE OR RADIAL ARM SAW. INCLUDES TWO OUTSIDE BLADES, FIVE CHIPPERS (FOUR 1/8", ONE 3/32"), WRENCH AND CARRYING CASE. WORKS EQUALLY WELL ON LEFT- OR RIGHT-OPERATING MACHINES. LIMITED LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD®LU91 COMPOUND MITER SAWBLADES DESIGNED FOR SLIDING MITER AND RADIAL ARM SAWS
|
| 8-1/2"x48t Tk Sliding Compound
...plus other(s)
|
FREUD® LU91 SAWBLADES FEATURE THIN KERFS TO PROVIDE SUPERIOR FINISH CUTS:
1/2" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. LASER CUT, ANTI-VIBRATION SLOTS. POLISHED OR COATED FINISHES; NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. -5° HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8-1/2" AND 10" DIAMETERS (5/8" ARBORS) AND 12" DIAMETER (1" ARBOR). 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU88R THIN KERF CUTOFF SAWBLADES LET YOUR SAW ZIP THROUGH TOUGH STOCK
|
| 8"x48t Tk Fine Finish Crosscut
...plus other(s)
|
FREUD® LU88R SAWBLADES, WITH THEIR THIN KERF AND COATED SURFACE, PROVIDE 38% MORE CUTTING POWER:
1/2" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 15° POSITIVE HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS). ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU87R THIN KERF RIP SAWBLADES FOR LESS RESISTANCE AND REDUCED FRICTION
|
| 8"x22t Thin Kerf Rip Sawblade
...plus other(s)
|
FREUD® LU87R SAWBLADES CAN GIVE NEW LIFE TO UNDERPOWERED TABLE AND RADIAL ARM SAWS:
3/4" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 20° POSITIVE HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS). 803-359 - DISCONTINUED LU87M008 IS SIMILAR TO 909-779 - LIMITED TO QUANTITIES ON HAND. 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
GET THREE FREUD® PERMA-SHIELD™ COATED 10" SAWBLADES AND SAVE
|
| 10" Tcs 3 Blade Set
...plus other(s)
|
THESE MONEY SAVING SETS INCLUDE FREUD® SAWBLADES THAT FEATURE HEAVY DUTY CARBIDE TEETH, LASER CUT ANTI-VIBRATION SLOTS AND A UNIQUE SIDE GRIND THAT POLISHES THE MATERIAL TO A SUPERIOR FINISH - ALL HAVE 5/8" ARBORS:
NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU85R PRECISION CUTOFF SAWBLADES PROVIDE GLASS SMOOTH FINISHES
|
| 8"x64t Ultimate Cut-off
...plus other(s)
|
FREUD® LU85R SAWBLADES ELIMINATE THE NEED FOR SANDING:
UNIQUE SIDE GRIND POLISHES MATERIAL TO PRODUCE A SUPERIOR FINISH. 1/4" MINIMUM DEPTH OF CUT; 1-5/8" MAXIMUM. LASER CUT, ANTI-VIBRATION DESIGN SLOTS. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 10° POSITIVE HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14" AND 15" DIAMETERS (1" ARBORS).
|
|
|
|
Sawblades - Circular
|
FREUD® LU84 COMBINATION SAWBLADES SERVE MULTIPLE PURPOSES
|
| 8"x40t Heavy Duty Combination
...plus other(s)
|
FREUD® LU84 SAWBLADES WORK EQUALLY WELL FOR RIPPING AND CROSSCUTTING:
3/4" MINIMUM DEPTH OF CUT WHEN CROSSCUTTING; 3-1/2" MAXIMUM. 1/4" MINIMUM DEPTH OF CUT WHEN RIPPING; 1-1/2" MAXIMUM. LARGE GULLETS IN FRONT OF FLAT TOP RAKERS ALLOW FOR FAST RIPPING AND EASY CHIP REMOVAL. LASER CUT, ANTI-VIBRATION SLOTS. POLISHED OR COATED FINISHES; NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 10° POSITIVE HOOK ANGLE; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 10", 12", 14" AND 16" DIAMETERS (1" ARBORS). ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LM72 SAWBLADES PROVIDE SMOOTH, FAST RIPS IN HARDWOODS AND SOFTWOODS
|
| 8"x24t Heavy Duty Rip
...plus other(s)
|
FREUD® LM72 SAWBLADES COMBINE A RIDGID BODY WITH RAZOR SHARP FLAT TOP TEETH FOR "GLUE LINE" PRECISION CUTS:
3/4" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. EXTRA LARGE, FLAT TOOTH DESIGN LEAVES A SMOOTH FINISH WITHOUT THE NEED FOR SANDING OR JOINTING. LASER CUT, ANTI-VIBRATION SLOTS. POLISHED OR COATED FINISHES; NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 20° POSITIVE HOOK ANGLE; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14", 16" AND 18" DIAMETERS (1" ARBORS). ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® SUPER DADO SET INCLUDES SHIMS AND 6 CHIPPERS
|
| 6" Stack Super Dado, 5/8" Bore
...plus other(s)
|
THE FREUD® SUPER DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT CHIP FREE SLOTS, GROOVES, DADOES AND RABBETS FROM 1/4" TO 29/32" WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
POLISHED METAL - AVAILABLE IN 6" (MODEL SD506) 8" (MODEL SD508) 10" (MODEL SD510) OR 12" (MODEL SD512) SETS. PROPERLY STRESSED AND TENSIONED 1/8" THICK OUTSIDE BLADES FEATURE VERY SHARP AND STEEPLY BEVELED CARBIDE TEETH (-12° HOOK ANGLE, 15° RELIEF ANGLE, 20° TOP BEVEL ANGLE) THAT LEAVE CLEANER EDGES. BLADES CUT 0.005" TO 0.010" DEEPER THAN CHIPPERS TO PREVENT TEAROUT ON CROSS GRAIN DADOES. INSIDE CHIPPERS FEATURE THE SAME CARBIDE - FOUR 1/8" THICK, ONE 3/32" AND ONE 1/16". NOT FOR USE ON HAND HELD SAWS. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU80R PLYWOOD AND MELAMINE SAWBLADES
|
| 10"x80t Hiatb Crosscut Blade
...plus other(s)
|
FREUD® LU80R PLYWOOD AND MELAMINE SAWBLADES FEATURE A LASER CUT BLADE DESIGN WITH ANTI-VIBRATION SLOTS TO MAKE THE BLADE ACCOUSTICALLY NEUTRAL:
CRISP, SPLINTER AND CHIP FREE CUTS IN VENEERED PLYWOODS AND LAMINATES. TICO™ HIGH DENSITY CARBIDE TEETH - RED, NON-STICK PERMA-SHIELD™ COATING. KICKBACK REDUCING DESIGN. 2° HOOK ANGLE - HI-ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU82 GENERAL CROSSCUT SAWBLADES WILL CUT STACKS OF MANUFACTURED WOOD PRODUCTS AS WELL AS HARDWOOD AND SOFTWOOD
|
| Lu82m 8"x48t Tcg Saw Blade, 5/8" Bore
...plus other(s)
|
FREUD® LU82 SAWBLADES HAVE BEEN DESIGNED FOR LONG LIFE IN HARSH CUTTING ENVIRONMENTS:
1/2" MINIMUM DEPTH OF CUT WHEN CROSSCUTTING; 2-3/4" MAXIMUM. 3/8" MINIMUM DEPTH OF CUT WHEN RIPPING; 3/4" MAXIMUM. PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE CUTTING FLAT AND TRUE. POLISHED FINISH. 10° POSITIVE HOOK ANGLE; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14", AND 16" DIAMETERS (1" ARBORS). ITALY.
VALUE PACKAGE 965-218 INCLUDES A 10" X 60TCG BLADE (147-008) AND A JOY-STICK™ SAFETY PUSH STICK (922-377).
|
|
|
|
Sawblades - Circular
|
FREUD® LU92M LONG LIFE PRODUCTION SAWBLADES FOR DOUBLE SIDED LAMINATES AND STACKED CHIPBOARD
|
| 8" X 48t Lu92 Laminate Blade
...plus other(s)
|
FREUD® LU92M SAWBLADES PROVIDE EXCELLENT FINISHES ON THE TOP AND BOTTOM OF THICK LAMINATES AND MELAMINES:
1" MINIMUM DEPTH OF CUT, 2-3/4" MAXIMUM. MODIFIED TRIPLE CHICK GRIND TOOTH DESIGN FOR CHIP FREE CUTTING. -6° NEGATIVE HOOK ANGLE; CARBIDE TIPPED, POLISHED METAL SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12" AND 14" DIAMETERS (1" ARBORS).
|
|
|
|
Sawblades - Circular
|
FREUD® LU89 NON-FERROUS METAL CUTTING SAWBLADES
|
| Lu89m 8x58t Non-ferrous Bld
...plus other(s)
|
FREUD® LU89 NON-FERROUS METAL CUTTING SAWBLADES CAN BE USED ON BRASS, ALUMINUM AND EXTRUSIONS WITH WOOD INSERTS LIKE WINDOW FRAMES:
LARGE GULLETS RESIST CHIP BUILD UP TO REDUCE BREAKAGE; LIQUID LUBRICANT USE RECOMMENDED. -7° HOOK ANGLE WITH TRIPLE CHIP GRIND; CARBIDE TIPPED, POLISHED METAL SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14", 15" AND 16" DIAMETERS (1" ARBORS).
|
|
|
|
Sawblades - Circular
|
WOODWORKER'S SUPPLY PREMIUM THIN KERF COMBINATION BLADES MADE BY FREUD® ARE STATE OF THE ART DESIGN AND TOP QUALITY MICRO-GRAIN CARBIDE
|
| 10" X 50t X 5/8" Thin Kerf Combo Blade
...plus other(s)
|
OUR PREMIUM THIN KERF COMBINATION BLADE IS DESIGNED AND BUILT FOR MAXIMUM PERFORMANCE ON 10" TABLE SAWS. THE COMBINATION DESIGN HAS 5 ATB TEETH FOLLOWED BY A GULLET TO CLEAR SAWDUST. THE CLOSE TOOTH PATTERN SEGMENTS PROVIDE SMOOTH CROSSCUTS, AND THE SAWDUST CLEARING GULLET ADDS CAPACITY FOR RIP CUTS. AN ANTI- KICKBACK DESIGN HELPS LIMIT FEED RATE FOR MORE CONTROLLED STOCK PROCESSING. WOODWORKER'S SUPPLY COMBINATION BLADE GIVES NEARLY THE SAME QUALITY CUT AS A SPECIALTY BLADE BUT WILL DO SO IN MORE MATERIALS AND WITHOUT HAVING TO CHANGE BLADES AS OFTEN. TRY ONE TO SEE THE DRAMATIC DIFFERENCE THE RIGHT BLADE CAN MAKE!
THIN kerf saw bladeS CUT QUICKLY AND REQUIRE LESS POWER, MAKING THEM IDEAL FOR A WIDE RANGE OF STOCK ON UNDERPOWERED SAWS. THE 156-647 10" COMBINATION BLADE FEATURES FREUD® TICO™ HIGH DENSITY CARBIDE FOR SHARP EDGES AND LONG SERVICE LIFE. PLATE DESIGN AND TENSIONED FOR MINIMAL RUNOUT TO HELP LIMIT KERF MARKS ON MATERIAL. POLISHED & FREUD® SILVER I.C.E. ™ COATED PLATE FINISH MAKES BLADE RESISTANT TO FRICTION, HEAT BUILDUP AND PITCH BUILDUP. 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. BORE. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
SPECIFICATIONS: DIAMETER: 10" BORE: 5/8" PLATE THICKNESS: .071" KERF: .098" HOOK: 15° TOP BEVEL: 10°
|
|
|
|
Sawblades - Circular
|
FREUD® BLADES TO FIT PLUNGE CUT AND TRACK SAWS PROVIDE QUALITY AT AN AFFORDABLE PRICE
|
| 160mm X 14t X 20mm Atb Carbide Saw Blade
...plus other(s)
|
|
FREUD® BLADES MADE TO FIT PLUNGE CUT AND TRACK SAWS. 3 TOOTH PATTERNS FOR SPECIFIC JOBS: RIP, GENERAL PURPOSE & SMOOTH FINISH. RIP BLADE HAS 14 TOOTH COUNT, ATB GRIND AND 20° HOOK TO CLEAR SAWDUST AND PREVENT BURNING. GENERAL PURPOSE BLADE HAD 28 TOOTH COUNT, ABT GRIND AND 12° HOOK IS A COMBINATION BLADE FOR SOLID STOCK. SMOOTH FINISH HAS 48 TOOTH COUNT, ATB GRIND AND 5° HOOK TO HELP PREVENT CHIP OUT ON CROSSCUTS AND IS IDEAL FOR PROCESSING SHEET GOODS INCLUDING MELAMINE. ALL BLADES FEATURE LASER CUT PLATES, ANTI-VIBRATION TECHNOLOGY, PRE-TENSIONED PLATES, HEAT EXPANSION SLOTS, FREUD® MICRO-GRAIN CARBIDE AND PERMA-SHIELD® NON-STICK COATING. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LM75R010 10" THIN KERF GLUE LINE RIP BLADE DELIVERS GLASS SMOOTH RIPS EVERY TIME
|
| 10"x30t Thin Kerf Glue Line Rip
|
|
THIN KERF DESIGN IS IDEAL FOR UNDERPOWERED SAWS OF LESS THAN 3HP OR FOR ANY APPLICATION WHERE MATERIAL SAVINGS ARE CRITICAL. PRODUCES EDGES THAT ARE READY FOR GLUE UP WITH NO NEED FOR JOINTING OR SANDING AFTER THE CUT. UNIQUE ANTI-VIBRATION DESIGN DRASTICALLY REDUCES VIBRATION AND SIDEWAYS MOVEMENT IN THE CUT TO EXTEND THE BLADE LIFE WHILE PROVIDING A CRISP, SWIRL-FREE FLAWLESS FINISH. EXCELLENT FOR STOCK UP TO 3/4" THICK. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® PREMIER FUSION™ 10" CIRCULAR SAWBLADE
|
| P410 10" X 40t Hi-atb Blade
...plus other(s)
|
A DOUBLE SIDE GROUND DESIGN FUSED WITH 30° HI-ATM TOOTH GEOMETRY MEAN THE NEW FREUD® F410 PREMIER FUSION™ 10" CIRCULAR SAWBLADE CAN PRODUCE FLAWLESS TOP, BOTTOM AND SIDE CUTS IN VENEERED PLYWOOD, HARDWOODS AND MELAMINE:
40 HI-ATB TICO™ CARBIDE TEETH, +18° HOOK ANGLE, 0.126 KERF, 0.098 PLATE, 5/8" ARBOR. 3/8" TO 1-1/2" DEEP RIP CUTS; 3/4" TO 3-1/2" DEEP CROSSCUTS. NON-STICK PERMA-SHIELD™ COATING RESISTS FRICTION, HEAT BUILDUP AND PITCH BUILD-UP. LASER CUT SLOTS MINIMIZE VIBRATION. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU73M HEAVY DUTY CROSSCUTTING BLADES FOR THE INDUSTRIAL CABINETMAKER
|
| 8" X 48t Cabinetmaker's Crosscut Blade
...plus other(s)
|
POLISHED METAL, CARBIDE TIPPED FREUD® LU73M SAWBLADES ARE PRIMARILY DESIGNED FOR HEAVY CROSSCUT USE IN A CABINETMAKERS' SHOPS:
ALTERNATE TOP BEVEL TOOTH DESIGN PROVIDES QUALITY CUTS. PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE FLAT AND TRUE. USE ON HARDWOOD, SOFTWOOD, PLYWOOD, LAMINATE AND PARTICLE BOARD - 1/2" MINIMUM DEPTH OF CUT, 2-3/4" MAXIMUM. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® BOX JOINT CUTTER SET
|
| Box Joint Cutter
|
THE PATENTED FREUD® SBOX8 BOX JOINT CUTTER SET PROVIDES A SIMPLE AND ACCURATE WAY TO CUT PERFECTLY SQUARE, CHIP FREE, FLAT BOTTOM BOX JOINTS WITHOUT SHIMS OR AWKWARD ADJUSTMENTS:
SIMPLY INSTALL THE 8" DIA., 5/8" ARBOR BLADES ON YOUR TABLE SAW (BACK-TO-BACK FOR 1/4" BOX JOINTS; FACE-TO-FACE FOR 3/8") AND FOLLOW ENCLOSED DIRECTIONS TO BUILD A JIG TO USE WITH YOUR SAW'S MITER GAUGE. TICO™ HI-DENSITY CARBIDE FOR A SMOOTHER FINISH AND LONGER LIFE. UNIQUE TOOTH DESIGN DELIVERS CLEAN CUTS THROUGH END GRAIN. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Advanced Search Tools
Browse
