|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
SET - 1/8"" ROUTER INLAY KIT W/CARBIDE BIT
|
| 1/8" Router Inlay Kit W/car Bit
...plus other(s)
|
THESE ROUTER INLAY GUIDE BUSHING SETS WERE DESIGNED TO BE USED AS BOTH INLAY KITS AND TEMPLATE GUIDES:
GUIDE BUSHINGS (1/4", 3/8", 1/2", 5/8", 7/8" OD) USE THE UNIVERSAL PORTER-CABLE® MOUNTING SYSTEM SO THEY CAN BE USED ON A WIDE VARIETY OF ROUTERS. TEMPLATE GUIDES (1/2", 7/8", 1-1/4", 1-5/8", 2-3/8" OD) PROTRUDE JUST UNDER 1/4" FOR USE WITH 1/4" THICK TEMPLATES. 959-596 - FIVE PIECE SET INCLUDES 1/8", 1/4", 3/8", 1/2" AND 3/4" BUSHING SETS. 959-603 - FOUR PIECE SET INCLUDES 1/4", 3/8", 1/2" AND 3/4" BUSHING SETS. 953-719 - ROUTER INLAY KIT COMES WITH A 1/8" BUSHING SET AND FREUD® 75-100 1/8" SOLID CARBIDE SPIRAL BIT (1/4" SHANK). 879-246 - FREUD® FT1500 INLAY TEMPLATE GUIDE KIT INCLUDES 1/8" SOLID CARBIDE SPIRAL BIT, UNIVERAL TEMPLATE GUIDE, QUICK CHANGE BUSHING AND INSTRUCTIONS.
|
|
|
|
Portable Power Tool Accessories - Dovetail Jigs
|
PATENT PENDING CHESTMATE™ DOVETAIL JIG IS EASY TO USE, ACCURATE AND AFFORDABLE
|
| Prazi Chestmate Dovetail Jig
|
USING THE DURABLE, CAST ALUMINUM PRAZI PR-3900 CHESTMATE™ DOVETAIL JIG AND YOUR ROUTER AND ACCESSORIES, YOU CAN CUT ANY PATTERN OF PINS AND TAILS IN ANY WIDTH STOCK 1/2" TO 1" THICK:
INSTEAD OF CLAMPING A WORKPIECE INTO A DOVETAIL JIG, YOU SECURE THE WORKPIECE ONTO YOUR BENCH AND CLAMP CHESTMATE™ ONTO THE EDGE OF THE BOARD. THEN, FOLLOWING AN EASILY CONSTRUCTED INDEXING BOARD, YOU ROUT YOUR OWN VARIABLE OR FIXED SPACE DOVETAIL JOINTS. REQUIRES A STANDARD ROUTER WITH 6" DIA. BASE (LARGE INDUSTRIAL ROUTER NOT RECOMMENDED), 5/8" DIA. X 1/2" LONG FOLLOWER BUSHING, 3/4" 14° DOVETAIL AND 5/16" STRAIGHT ROUTER BITS PLUS A SECURELY MOUNTED BENCH VISE AND SHOP CLAMPS. COMPLETE INSTRUCTIONS AND PIN AND TAIL INSERTS INCLUDED. APPROX. 3"H X 8"W X 9"D. 3-3/4 LBS. SHIPPING WEIGHT. LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® 5/16" STRAIGHT ROUTER BIT, 1/4" SHANK - 110-186. WOODTEK® 5/16" STRAIGHT ROUTER BIT, 1/2" SHANK - 110-192. FREUD® 3/4" 14° DOVETAIL ROUTER BIT, 1/4" SHANK - 129-233. WOODTEK® 3/4" 14° DOVETAIL ROUTER BIT, 1/2" SHANK - 819-452. WOODTEK® C-CLAMPS - 114-647. JORGENSEN® 10" BENCH VISE - 801-744. PORTER-CABLE® TEMPLATE GUIDE - 107-144.
|
|
|
|
Bits Router/tongue & Groove/wedge
|
FREUD® WEDGE TONGUE & GROOVE ROUTER BITS
|
| 5/16" Wedge Tongue Bit
...plus other(s)
|
YOU CAN USE CARBIDE TIPPED FREUD® WEDGE TONGUE & GROOVE ROUTER BITS TO JOIN BOARDS FOR WIDE PANELS SUCH AS TABLE TOPS:
PROVIDES STRONG JOINT DUE TO INCREASED GLUE AREA. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/tongue & Groove/v Notch Paneling Wainscoting Beadboard
|
FREUD® REVERSIBLE WAINSCOTING ROUTER BIT
|
| Reversible Wainscoting Bit
|
THE FREUD® REVERSIBLE WAINSCOTING ROUTER BIT EASILY MILLS MATCHING FRAME JOINTS IN 1/2" TO 5/8" THICK STOCK:
BIT HEIGHT IS SET ONE TIME FOR MALE AND FEMALE JOINTS WITHOUT REQUIRING FENCE OR HEIGHT ADJUSTMENTS. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/tongue & Groove/straight
|
FREUD® ADJUSTABLE TONGUE AND GROOVE ROUTER BIT SET
|
| Adjustable Tongue & Groove Bit Set
|
THE CARBIDE TIPPED FREUD® #99-036 ADJUSTABLE TONGUE AND GROOVE ROUTER BIT SET ADJUSTS FROM 7/32" TO 3/8" TO HANDLE 1/2" TO 1-1/4" THICK STOCK (SPACERS INCLUDED FOR ADJUSTMENTS) - TONGUE CUTTER WITH OPPOSING SHEARS LEAVES A SPLINTER FREE FINISH:
TONGUE BIT: 1-3/4" OVERALL DIAMETER, 7/8" BEARING DIAMETER, 7/32" TO 3/8" CARBIDE HEIGHT, 3-1/4" OAL. GROOVE: 1-3/4" OVERALL DIAMETER, 7/8" BEARING DIAMETER, 1-7/16" TO 1-11/32" CARBIDE HEIGHT, 2-11/16" OAL. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" DIA. SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/straight
|
FREUD® SINGLE FLUTE STRAIGHT ROUTER BITS
|
| Single Flute Straight Bit
...plus other(s)
|
FREUD® SINGLE FLUTE STRAIGHT ROUTER BITS ARE DESIGNED FOR HIGH SPEED PRODUCTION WORK WITH A MAXIMUM AMOUNT OF CHIP CLEARANCE:
RED, NON-STICK PERMA-SHIELD COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/straight
|
FREUD® SINGLE FLUTE STRAIGHT ROUTER BITS
|
| Single Flute Straight Bit
...plus other(s)
|
CARBIDE TIPPED FREUD® SINGLE FLUTE STRAIGHT ROUTER BITS ARE DESIGNED FOR HIGH SPEED PRODUCTION WORK WITH A MAXIMUM AMOUNT OF CHIP CLEARANCE:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/straight Plunge Cutting
|
FREUD® DOUBLE FLUTE STRAIGHT ROUTER BITS
|
| 1/16" Solid Carbide Straight Bit
...plus other(s)
|
FREUD® DOUBLE FLUTE STRAIGHT ROUTER BITS FEATURE PRECISE SHEAR AND HOOK ANGLES THAT LET THE BITS CUT SMOOTHER THAN OTHERS - END OF BIT RELIEF ALLOWS FOR FAST PLUNGING:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION (04-096, 04-098, 04-100, 04-101, 04-102, 04-103, 04-104, 04-106, 04-108, 04-110, 04-111, 128-873, 128-876, 128-879, 129-887, 128-945 AND 128-948 ARE SOLID CARBIDE). CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/stagger Tooth
|
FREUD® STAGGER ROUTER BITS
|
| 3/8" Stagger Router Bit
...plus other(s)
|
FREUD® STAGGER ROUTER BITS COMBINE THE BALANCE OF A DOUBLE FLUTE BIT WITH THE SPEED AND VERSATILITY OF A SINGLE FLUTE TOOL:
CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON CNC AND OTHER AUTOMATIC ROUTERS, HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/plywood Dado (undersized)
|
FREUD 90-106 4 PIECE UNDERSIZE PLYWOOD BITS
|
| 4pc Undersize Plywood Bit Set 1/4" Shank
...plus other(s)
|
THE FREUD® #90-106 4 PIECE UNDERSIZED PLYWOOD ROUTER BIT SET CUTS PERFECTLY FITTED GROOVES AND DADOES INTO TODAY'S UNDERSIZED PLYWOOD. THE FREUD® #90-106 4 PIECE UNDERSIZED PLYWOOD ROUTER BIT SET CUTS PERFECTLY FITTED GROOVES AND DADOES INTO TODAY'S UNDERSIZED PLYWOOD:
INCLUDES CARBIDE TIPPED 7/32" 2 FLUTE STRAIGHT BIT, 3 MORTISING BITS (23/32", 11/32", 15/32") AND A LATCHING WOODEN STORAGE CASE. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER.RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION.CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" SHANKS - 89-650 HAS 1/2" SHANKS.ONE YEAR MANUFACTURER'S WARRANTY.ITALY.
|
|
|
|
Bits Router/straight/plywood Dado (undersized)
|
FREUD® UNDERSIZED PLYWOOD GROOVING BIT SET
|
| 4pc Undersize Plywood Bit Set 1/2" Shank
|
THE FREUD® #89-650 4 PIECE UNDERSIZED PLYWOOD GROOVING BIT SET PERFECTLY MATCHES THE REAL THICKNESSES OF TODAY'S NOMINAL 1/4", 3/8", 1/2" AND 3/4" PLYWOOD:
TICO™ HI-DENSITY CARBIDE WITH TITANIUM 7/32", 11/32", 15/32" AND 23/32" DIA. BITS AND LATCHING STORAGE CASE. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/panel Pilot
|
FREUD® PANEL PILOT ROUTER BITS
|
| 1/4" Panel Pilot Router Bit
...plus other(s)
|
CARBIDE TIPPED FREUD® PANEL PILOT ROUTER BITS WILL OUTLAST HSS BITS MANY TIMES BEFORE SHARPENING (70-100 IS SOLID CARBIDE):
DRILL THROUGH POINT ALLOWS SELF STARTING; PILOT ACTS AS A GUIDE FOR TEMPLATE WORK. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE ROUTERS FOR TEMPLATE WORK. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/straight/hinge Mortising
|
FREUD® TOP BEARING HINGE MORTISING ROUTER BIT
|
| Top Bearing Hinge Mortising Bit
|
THE SOLID CARBIDE FREUD® TOP BEARING HINGE MORTISING ROUTER BIT IS PERFECTLY SUITED FOR USE WITH TEMPLATES OR SHOP BUILT JIGS:
TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS - LASTS UP TO 50X LONGER THAN HIGH SPEED STEEL. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/straight/hinge Mortising
|
FREUD® MORTISING ROUTER BITS
|
| 1/2"ct Mortising Bit
...plus other(s)
|
IDEAL FOR HINGES, MORTISES AND DADOES, CARBIDE TIPPED FREUD® MORTISING ROUTER BITS ARE DESIGNED WITH DEEP CENTER GULLETS FOR MAXIMUM MATERIAL REMOVAL WITHOUT CHIP LOADING AND DOWN SHEAR TO ELIMINATE SPLINTERING:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/spiral & Compression/spiral Upcut
|
FREUD® SOLID CARBIDE UP SPIRAL ROUTER BITS IDEAL FOR PRODUCTION WORK
|
| Solid Carbide Up Spiral Bit
...plus other(s)
|
SOLID CARBIDE FREUD® UP SPIRAL ROUTER BITS ARE ESPECIALLY SUITED FOR CUTTING MORTISES OR ROUTING DEEP BLIND HOLES:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/spiral & Compression/spiral Upcut
|
FREUD® SOLID CARBIDE UP SPIRAL ROUTER BITS IDEAL FOR PRODUCTION WORK
|
| Solid Carbide Up Spiral Bit
...plus other(s)
|
SOLID CARBIDE FREUD® UP SPIRAL ROUTER BITS ARE ESPECIALLY SUITED FOR CUTTING MORTISES OR ROUTING DEEP BLIND HOLES:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/spiral & Compression/spiral Downcut
|
FREUD® SOLID CARBIDE, DOWN SPIRAL ROUTER BITS
|
| Solid Carbide Down Spiral Bit
...plus other(s)
|
SOLID CARBIDE FREUD® DOUBLE AND TRIPLE FLUTE DOWN SPIRAL ROUTER BITS ARE IDEAL FOR SMOOTH ROUTING WHERE CHIP REMOVAL IS NOT A PROBLEM:
CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON CNC AND OTHER AUTOMATIC ROUTERS, PIN ROUTERS, HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" OR 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/spiral & Compression/spiral Downcut
|
FREUD® SOLID CARBIDE, DOWN SPIRAL ROUTER BITS
|
| Solid Carbide Down Spiral Bit
...plus other(s)
|
SOLID CARBIDE FREUD® DOUBLE AND TRIPLE FLUTE DOWN SPIRAL ROUTER BITS ARE IDEAL FOR SMOOTH ROUTING WHERE CHIP REMOVAL IS NOT A PROBLEM:
CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON CNC AND OTHER AUTOMATIC ROUTERS, PIN ROUTERS, HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" OR 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/spiral & Compression/compression
|
FREUD® DIAMOND COMPRESSION BITS CAN LAST UP TO 100 TIMES LONGER THAN CARBIDE IN MDF, CHIPBOARD AND MELAMINE
|
| 5/8" Diamond Compression Bit
...plus other(s)
|
DESIGNED TO RUN IN CNC MACHINES, FREUD® DIAMOND COMPRESSION BITS FEATURE AN UPCUT/DOWNCUT STAGGERED FLUTE BIT WITH POLYCRYSTALLINE DIAMOND TIPS:
THE TWO FLUTES CUT IN OPPOSITE DIRECTIONS, CREATING COMPRESSION TOWARDS THE CENTER, WHICH ALLOWS AN EXCELLENT CHIP FREE FINISH ON TWO SIDED MATERIALS WHILE STILL MAINTAINING HIGH FEED RATES. CAN ALSO BE USED IN AUTOMATIC, PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS FOR PLYWOOD, HARDWOOD AND SOFT WOOD. ITALY.
|
|
|
|
Bits Router/spiral & Compression/compression
|
FREUD® DIAMOND COMPRESSION BITS CAN LAST UP TO 100 TIMES LONGER THAN CARBIDE IN MDF, CHIPBOARD AND MELAMINE
|
| 1/2" Diamond Compression Bit
...plus other(s)
|
DESIGNED TO RUN IN CNC MACHINES, FREUD® DIAMOND COMPRESSION BITS FEATURE AN UPCUT/DOWNCUT STAGGERED FLUTE BIT WITH POLYCRYSTALLINE DIAMOND TIPS:
THE TWO FLUTES CUT IN OPPOSITE DIRECTIONS, CREATING COMPRESSION TOWARDS THE CENTER, WHICH ALLOWS AN EXCELLENT CHIP FREE FINISH ON TWO SIDED MATERIALS WHILE STILL MAINTAINING HIGH FEED RATES. CAN ALSO BE USED IN AUTOMATIC, PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS FOR PLYWOOD, HARDWOOD AND SOFT WOOD. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
