|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® ADJUSTABLE 3 PIECE DOOR SETS CAN BE USED TO BUILD DOORS UP TO 1-1/4" THICK AND WILL ACCOMMODATE MORTISE & TENON JOINERY
|
| 3-pcs Door Set With Bevel Panel Bit
...plus other(s)
|
ADJUSTABLE STILE & RAIL BITS ACCOMMODATE STOCK FROM 5/8" TO 1-1/4". COPE CUTTER WILL PASS UNDER TENON AND ALLOW FOR EXTENDED TENON. ADJUSTABLE GROOVE CUTTER ACCOMMODATED PANEL EDGES FROM 7/32" TO 3/8". AVAILABLE IN 4 RAISED PANEL STYLES: BEVEL, COVE, OGEE W/COVE EDGE, & OGEE W/BEVEL EDGE. 2ND PROFILE CUTTER CAN BE ADDED FOR DOORS WITH 2 DECORATIVE SIDES. RABBET CUTTER AVAILABLE FOR GLASS PANEL DOOR JOINERY. INCLUDES STILE AND RAIL BITS ALONG WITH A QUADRA-CUT™ PANEL RAISER IN A NESTED CASE. THICK CARBIDE TIPS FOR LONG LIFE. EACH SET INCLUDES RAISED PANEL DOORS MADE SIMPLE" CD. LIFETIME MANUFACTURERS WARRANTY. ITALY.
97-150 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" DIA. RAISED PANEL BIT 97-152 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" DIA. RAISED PANEL BIT 97-154 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH OGEE AND COVE EDGE 3-1/2" DIA. RAISED PANEL BIT 97-156 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" DIA. RAISED PANEL BIT AND COVE BACK CUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-158 QUARTER-ROUND MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" DIA. RAISED PANEL BIT AND COVE BACK CUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-250 OGEE MOLDING DETAIL STILE & RAIL SET WITH 18.3° BEVEL 3-1/2" RAISED PANEL BIT 97-252 OGEE MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" RAISED PANEL BIT 97-254 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE AND COVE EDGE 3-1/2" RAISED PANEL BIT 97-258 OGEE MOLDING DETAIL STILE & RAIL SET WITH COVE 3-1/2" RAISED PANEL BIT AND COVE BACKCUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-260 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE 3-1/2" RAISED PANEL BIT AND COVE BACKCUTTER. A GOOD SELECTION FOR DOORS WITH THICK PANELS 97-276 OGEE MOLDING DETAIL STILE & RAIL SET WITH OGEE AND BEVEL EDGE 2-3/4" RAISED PANEL BIT 99-860 QUARTER-ROUND CUTTER USED TO ADD RAIL & STILE MOLDING DETAIL TO OPPOSITE SIDE OF DOOR. A GOOD SELECTION FOR DOORS WITH THICK FRAMES 99-861 OGEE CUTTER USED TO ADD RAIL & STILE MOLDING DETAIL TO OPPOSITE SIDE OF DOOR. A GOOD SELECTION FOR DOORS WITH THICK FRAMES 54-760 RABBET CUTTER USED TO CREATE RECESS FOR GLAZED DOORS. A GOOD SELECTION FOR UPPER CABINET DOORS
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/door Construction/stile & Rail - Cabinet
|
FREUD® ADJUSTABLE RAIL & STILE SETS PERMIT BOTH COPE & STICK AND TRADITIONAL MORTISE & TENON JOINERY
|
| Adjustable Rail & Stile Set, Qtr-rnd
...plus other(s)
|
|
ADJUSTABLE STILE & RAIL BITS ACCOMMODATE STOCK FROM 5/8" TO 1-1/4". COPE CUTTER HAS FLUSH TOP TO PASS UNDER TENON AND ALLOW FOR EXTENDED TENON. ADJUSTABLE GROOVE CUTTER ACCOMMODATED PANEL EDGES FROM 7/32" TO 3/8". AVAILABLE IN 4 MOLDING DETAILS: QUARTER-ROUND, OGEE, BEAD, AND BEVEL. 2ND PROFILE CUTTER CAN BE ADDED FOR DOORS WITH 2 DECORATIVE SIDES. RABBET CUTTER AVAILABLE FOR GLASS PANEL DOOR JOINERY. EACH BIT INCLUDES SHIMS FOR FINE TUNING A JOINT FOR A CONTINUED PERFECT FIT. TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. USE ON TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/dovetail
|
FREUD® BUTTERFLY SPLINE BIT
|
| 1-1/8" Butterfly Spline Bit
|
|
THIS BIT PRODUCES A STRONG, ATTRACTIVE METHOD OF JOINING WOOD. USE A 14-DEGREE DOVETAIL BIT TO PRODUCE THE MATING GROOVES. CUTS ALL COMPOSITION MATERIALS, PLYWOODS, HARDWOODS, AND SOFTWOODS. USE ON CNC AND OTHER AUTOMATIC ROUTERS AS WELL AS HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/dovetail
|
FREUD® DOVETAIL ROUTER BITS
|
| 3/8" Dovetail-9 Degree-1/4"shank
...plus other(s)
|
CARBIDE TIPPED FREUD® DOVETAIL ROUTER BITS PROVIDE SMOOTH, INTRICATE DOVETAIL JOINTS AND ARE COMPATIBLE WITH MANY POPULAR DOVETAILING JIGS:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/drawer Lock
|
FREUD® DRAWER JOINT ROUTER BITS
|
| Drawer Lock Bit 1/2" Shank
...plus other(s)
|
FREUD® CARBIDE TIPPED DRAWER JOINT ROUTER BITS MAKE TWO CUTS TO FORM A JOINT. ONE PIECE IS FED VERTICALLY; THE OTHER HORIZONTIALLY:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ITALY.
|
|
|
|
Bits Router/joinery/finger Joint
|
FREUD® FINGER JOINT ROUTER BIT
|
| Finger Joint Router Bit
|
THE CARBIDE TIPPED FREUD® FINGER JOINT ROUTER BIT IS IDEAL FOR JOINING WOOD EDGE TO EDGE OR END TO END. PRODUCES A JOINT STRONGER THAN THE WOOD ITSELF:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/glue Joint
|
FREUD® REVERSIBLE GLUE JOINT ROUTER BIT INCREASES GLUE SURFACE AREA
|
| Reversible Glue Joint Router Bit
|
THE CARBIDE TIPPED FREUD® #99-031 REVERSIBLE GLUE JOINT ROUTER BIT PLANES BOARDS TO A UNIFORM THICKNESS - ALIGN BIT TO CENTER OF BOARD, THEN REVERSE EACH BOARD FOR A PERFECT GLUE JOINT ("D" IS SHANK DIAMETER):
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
OL' YELLER™ REGULAR WOOD GLUE - 909-293.
|
|
|
|
Bits Router/joinery/lock Miter
|
FREUD® LOCK MITER ROUTER BITS
|
| 45-deg Lock Miter Bit, 1/2" To 1" Wood
...plus other(s)
|
CARBIDE TIPPED FREUD® LOCK MITER ROUTER BITS MAKE PERFECT LOCK MITERS ON SMALLER PROJECTS LIKE HUMIDORS AND JEWELRY BOXES. WHEN PROPERLY SET UP, RUN ONE BOARD, VERTICALLY, AND THE PIECE TO BE JOINED, HORIZONTALLY, FOR A PERFECT FIT:
99-034 HANDLES STOCK 1/2" TO 1" THICK. 111-320 (99-035) HANDLES STOCK 3/8" TO 3/4" THICK. 99-043 22-1/2° SET HANDLES STOCK 3/8" TO 3/4" THICK. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON CNC AND OTHER AUTOMATIC ROUTERS OR IN A ROUTER TABLE WITH FENCE. 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/raised Panel V Joint
|
FREUD® RAISED PANEL V JOINT BIT
|
| Multi V Edge Joint Bit For Raised Panels
|
|
MATING SURFACES ARE AT AN ANGLE, NOT VERTICAL, SO THE DARK LINES LIKE THOSE CREATED BY STANDARD FINGER JOINT BITS ARE NOT VISIBLE. BIT DOES NOT HAVE TO BE CENTERED IN THE WOOD. SIMPLY RAISE OR LOWER THE BIT 3/32" TO ROUT THE MATING EDGE. CUTS ALL COMPOSITION MATERIALS, PLYWOODS, HARDWOODS AND SOFTWOODS. USE ON TABLE-MOUNTED ROUTERS. ITALY.
|
|
|
|
Bits Router/joinery/raised Panel V Joint
|
FREUD® "V" PANEL ROUTER BIT SET
|
| V Panel T&g Router Bit Set, 1/2" Shank
|
CREATE ATTRACTIVE "V" GROOVE PANELING WITH THIS TWO-PIECE, CARBIDE TIPPED FREUD® #99-191 "V" PANEL ROUTER BIT SET:
ENCLOSED SPACERS ALLOW YOU TO PRODUCE "V" PANELING USING 1/2", 3/4" OR 1" THICK STOCK. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE-MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
