Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Sawblades (33)
Circular (33)
|
|
|
Sawblades - Circular
|
TEN MOST POPULAR FREUD® ROUTER BITS IN ONE HANDY SET
|
| Freud Lu97m010 10" Sawblade Tcg
...plus other(s)
|
|
|
|
Sawblades - Circular
|
FREUD® 8" STACKED DADO SET DOESN'T NEED SHIMS
|
| 8"dial A Width Dado System
|
NOT A WOBBLE DADO! CUTTING CLEAN, FLAT-BOTTOM DADOES IS A LOT EASIER WITH THE FREUD® MODEL SD608 8" DIAL-A-WIDTH DADO™ STACKED DADO SET:
IN THIS SET, SHIMS HAVE BEEN REPLACED WITH A PATENTED DIAL SYSTEM, WHICH ALLOWS YOU TO MICRO-ADJUST THE CUT WIDTH - EACH "CLICK" ADJUSTS THE BLADE 0.004". CUT CAPACITY WITH THE COMBINATION OF INCLUDED CHIPPERS IS FROM 1/4" TO 29/32". OVERSIZED TEETH ALLOW FOR LONGER CUTTING LIFE BETWEEN SHARPENINGS AS WELL AS MORE RESHARPENINGS - -5° HOOK ANGLE, 15° TOP BEVEL ANGLE, 5/8" ARBOR. MOUNTS EASILY WITH NO LOOSE COMPONENTS AND ADJUSTABLE HUB LETS YOU FINE TUNE WIDTH WITHOUT EVER REMOVING THE CUTTER FROM YOUR TABLE OR RADIAL ARM SAW. INCLUDES TWO OUTSIDE BLADES, FIVE CHIPPERS (FOUR 1/8", ONE 3/32"), WRENCH AND CARRYING CASE. WORKS EQUALLY WELL ON LEFT- OR RIGHT-OPERATING MACHINES. LIMITED LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD®LU91 COMPOUND MITER SAWBLADES DESIGNED FOR SLIDING MITER AND RADIAL ARM SAWS
|
| 8-1/2"x48t Tk Sliding Compound
...plus other(s)
|
FREUD® LU91 SAWBLADES FEATURE THIN KERFS TO PROVIDE SUPERIOR FINISH CUTS:
1/2" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. LASER CUT, ANTI-VIBRATION SLOTS. POLISHED OR COATED FINISHES; NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. -5° HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8-1/2" AND 10" DIAMETERS (5/8" ARBORS) AND 12" DIAMETER (1" ARBOR). 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU88R THIN KERF CUTOFF SAWBLADES LET YOUR SAW ZIP THROUGH TOUGH STOCK
|
| 8"x48t Tk Fine Finish Crosscut
...plus other(s)
|
FREUD® LU88R SAWBLADES, WITH THEIR THIN KERF AND COATED SURFACE, PROVIDE 38% MORE CUTTING POWER:
1/2" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 15° POSITIVE HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS). ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU87R THIN KERF RIP SAWBLADES FOR LESS RESISTANCE AND REDUCED FRICTION
|
| 8"x22t Thin Kerf Rip Sawblade
...plus other(s)
|
FREUD® LU87R SAWBLADES CAN GIVE NEW LIFE TO UNDERPOWERED TABLE AND RADIAL ARM SAWS:
3/4" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 20° POSITIVE HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS). 803-359 - DISCONTINUED LU87M008 IS SIMILAR TO 909-779 - LIMITED TO QUANTITIES ON HAND. 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
GET THREE FREUD® PERMA-SHIELD™ COATED 10" SAWBLADES AND SAVE
|
| 10" Tcs 3 Blade Set
...plus other(s)
|
THESE MONEY SAVING SETS INCLUDE FREUD® SAWBLADES THAT FEATURE HEAVY DUTY CARBIDE TEETH, LASER CUT ANTI-VIBRATION SLOTS AND A UNIQUE SIDE GRIND THAT POLISHES THE MATERIAL TO A SUPERIOR FINISH - ALL HAVE 5/8" ARBORS:
NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU85R PRECISION CUTOFF SAWBLADES PROVIDE GLASS SMOOTH FINISHES
|
| 8"x64t Ultimate Cut-off
...plus other(s)
|
FREUD® LU85R SAWBLADES ELIMINATE THE NEED FOR SANDING:
UNIQUE SIDE GRIND POLISHES MATERIAL TO PRODUCE A SUPERIOR FINISH. 1/4" MINIMUM DEPTH OF CUT; 1-5/8" MAXIMUM. LASER CUT, ANTI-VIBRATION DESIGN SLOTS. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 10° POSITIVE HOOK ANGLE WITH ATB GRIND; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14" AND 15" DIAMETERS (1" ARBORS).
|
|
|
|
Sawblades - Circular
|
FREUD® LU84 COMBINATION SAWBLADES SERVE MULTIPLE PURPOSES
|
| 8"x40t Heavy Duty Combination
...plus other(s)
|
FREUD® LU84 SAWBLADES WORK EQUALLY WELL FOR RIPPING AND CROSSCUTTING:
3/4" MINIMUM DEPTH OF CUT WHEN CROSSCUTTING; 3-1/2" MAXIMUM. 1/4" MINIMUM DEPTH OF CUT WHEN RIPPING; 1-1/2" MAXIMUM. LARGE GULLETS IN FRONT OF FLAT TOP RAKERS ALLOW FOR FAST RIPPING AND EASY CHIP REMOVAL. LASER CUT, ANTI-VIBRATION SLOTS. POLISHED OR COATED FINISHES; NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 10° POSITIVE HOOK ANGLE; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 10", 12", 14" AND 16" DIAMETERS (1" ARBORS). ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LM72 SAWBLADES PROVIDE SMOOTH, FAST RIPS IN HARDWOODS AND SOFTWOODS
|
| 8"x24t Heavy Duty Rip
...plus other(s)
|
FREUD® LM72 SAWBLADES COMBINE A RIDGID BODY WITH RAZOR SHARP FLAT TOP TEETH FOR "GLUE LINE" PRECISION CUTS:
3/4" MINIMUM DEPTH OF CUT; 2-3/4" MAXIMUM. EXTRA LARGE, FLAT TOOTH DESIGN LEAVES A SMOOTH FINISH WITHOUT THE NEED FOR SANDING OR JOINTING. LASER CUT, ANTI-VIBRATION SLOTS. POLISHED OR COATED FINISHES; NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. 20° POSITIVE HOOK ANGLE; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14", 16" AND 18" DIAMETERS (1" ARBORS). ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® SUPER DADO SET INCLUDES SHIMS AND 6 CHIPPERS
|
| 6" Stack Super Dado, 5/8" Bore
...plus other(s)
|
THE FREUD® SUPER DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT CHIP FREE SLOTS, GROOVES, DADOES AND RABBETS FROM 1/4" TO 29/32" WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
POLISHED METAL - AVAILABLE IN 6" (MODEL SD506) 8" (MODEL SD508) 10" (MODEL SD510) OR 12" (MODEL SD512) SETS. PROPERLY STRESSED AND TENSIONED 1/8" THICK OUTSIDE BLADES FEATURE VERY SHARP AND STEEPLY BEVELED CARBIDE TEETH (-12° HOOK ANGLE, 15° RELIEF ANGLE, 20° TOP BEVEL ANGLE) THAT LEAVE CLEANER EDGES. BLADES CUT 0.005" TO 0.010" DEEPER THAN CHIPPERS TO PREVENT TEAROUT ON CROSS GRAIN DADOES. INSIDE CHIPPERS FEATURE THE SAME CARBIDE - FOUR 1/8" THICK, ONE 3/32" AND ONE 1/16". NOT FOR USE ON HAND HELD SAWS. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU80R PLYWOOD AND MELAMINE SAWBLADES
|
| 10"x80t Hiatb Crosscut Blade
...plus other(s)
|
FREUD® LU80R PLYWOOD AND MELAMINE SAWBLADES FEATURE A LASER CUT BLADE DESIGN WITH ANTI-VIBRATION SLOTS TO MAKE THE BLADE ACCOUSTICALLY NEUTRAL:
CRISP, SPLINTER AND CHIP FREE CUTS IN VENEERED PLYWOODS AND LAMINATES. TICO™ HIGH DENSITY CARBIDE TEETH - RED, NON-STICK PERMA-SHIELD™ COATING. KICKBACK REDUCING DESIGN. 2° HOOK ANGLE - HI-ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU82 GENERAL CROSSCUT SAWBLADES WILL CUT STACKS OF MANUFACTURED WOOD PRODUCTS AS WELL AS HARDWOOD AND SOFTWOOD
|
| Lu82m 8"x48t Tcg Saw Blade, 5/8" Bore
...plus other(s)
|
FREUD® LU82 SAWBLADES HAVE BEEN DESIGNED FOR LONG LIFE IN HARSH CUTTING ENVIRONMENTS:
1/2" MINIMUM DEPTH OF CUT WHEN CROSSCUTTING; 2-3/4" MAXIMUM. 3/8" MINIMUM DEPTH OF CUT WHEN RIPPING; 3/4" MAXIMUM. PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE CUTTING FLAT AND TRUE. POLISHED FINISH. 10° POSITIVE HOOK ANGLE; CARBIDE TIPPED SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14", AND 16" DIAMETERS (1" ARBORS). ITALY.
VALUE PACKAGE 965-218 INCLUDES A 10" X 60TCG BLADE (147-008) AND A JOY-STICK™ SAFETY PUSH STICK (922-377).
|
|
|
|
Sawblades - Circular
|
FREUD® LU92M LONG LIFE PRODUCTION SAWBLADES FOR DOUBLE SIDED LAMINATES AND STACKED CHIPBOARD
|
| 8" X 48t Lu92 Laminate Blade
...plus other(s)
|
FREUD® LU92M SAWBLADES PROVIDE EXCELLENT FINISHES ON THE TOP AND BOTTOM OF THICK LAMINATES AND MELAMINES:
1" MINIMUM DEPTH OF CUT, 2-3/4" MAXIMUM. MODIFIED TRIPLE CHICK GRIND TOOTH DESIGN FOR CHIP FREE CUTTING. -6° NEGATIVE HOOK ANGLE; CARBIDE TIPPED, POLISHED METAL SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12" AND 14" DIAMETERS (1" ARBORS).
|
|
|
|
Sawblades - Circular
|
FREUD® LU89 NON-FERROUS METAL CUTTING SAWBLADES
|
| Lu89m 8x58t Non-ferrous Bld
...plus other(s)
|
FREUD® LU89 NON-FERROUS METAL CUTTING SAWBLADES CAN BE USED ON BRASS, ALUMINUM AND EXTRUSIONS WITH WOOD INSERTS LIKE WINDOW FRAMES:
LARGE GULLETS RESIST CHIP BUILD UP TO REDUCE BREAKAGE; LIQUID LUBRICANT USE RECOMMENDED. -7° HOOK ANGLE WITH TRIPLE CHIP GRIND; CARBIDE TIPPED, POLISHED METAL SAWBLADES AVAILABLE IN 8", 9" AND 10" DIAMETERS (5/8" ARBORS) AND 12", 14", 15" AND 16" DIAMETERS (1" ARBORS).
|
|
|
|
Sawblades - Circular
|
WOODWORKER'S SUPPLY PREMIUM THIN KERF COMBINATION BLADES MADE BY FREUD® ARE STATE OF THE ART DESIGN AND TOP QUALITY MICRO-GRAIN CARBIDE
|
| 10" X 50t X 5/8" Thin Kerf Combo Blade
...plus other(s)
|
OUR PREMIUM THIN KERF COMBINATION BLADE IS DESIGNED AND BUILT FOR MAXIMUM PERFORMANCE ON 10" TABLE SAWS. THE COMBINATION DESIGN HAS 5 ATB TEETH FOLLOWED BY A GULLET TO CLEAR SAWDUST. THE CLOSE TOOTH PATTERN SEGMENTS PROVIDE SMOOTH CROSSCUTS, AND THE SAWDUST CLEARING GULLET ADDS CAPACITY FOR RIP CUTS. AN ANTI- KICKBACK DESIGN HELPS LIMIT FEED RATE FOR MORE CONTROLLED STOCK PROCESSING. WOODWORKER'S SUPPLY COMBINATION BLADE GIVES NEARLY THE SAME QUALITY CUT AS A SPECIALTY BLADE BUT WILL DO SO IN MORE MATERIALS AND WITHOUT HAVING TO CHANGE BLADES AS OFTEN. TRY ONE TO SEE THE DRAMATIC DIFFERENCE THE RIGHT BLADE CAN MAKE!
THIN KERF BLADES CUT QUICKLY AND REQUIRE LESS POWER, MAKING THEM IDEAL FOR A WIDE RANGE OF STOCK ON UNDERPOWERED SAWS. THE 156-647 10" COMBINATION BLADE FEATURES FREUD® TICO™ HIGH DENSITY CARBIDE FOR SHARP EDGES AND LONG SERVICE LIFE. PLATE DESIGN AND TENSIONED FOR MINIMAL RUNOUT TO HELP LIMIT KERF MARKS ON MATERIAL. POLISHED & FREUD® SILVER I.C.E. ™ COATED PLATE FINISH MAKES BLADE RESISTANT TO FRICTION, HEAT BUILDUP AND PITCH BUILDUP. 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. BORE. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
SPECIFICATIONS: DIAMETER: 10" BORE: 5/8" PLATE THICKNESS: .071" KERF: .098" HOOK: 15° TOP BEVEL: 10°
|
|
|
|
Sawblades - Circular
|
FREUD® BLADES TO FIT PLUNGE CUT AND TRACK SAWS PROVIDE QUALITY AT AN AFFORDABLE PRICE
|
| 160mm X 14t X 20mm Atb Carbide Saw Blade
...plus other(s)
|
|
FREUD® BLADES MADE TO FIT PLUNGE CUT AND TRACK SAWS. 3 TOOTH PATTERNS FOR SPECIFIC JOBS: RIP, GENERAL PURPOSE & SMOOTH FINISH. RIP BLADE HAS 14 TOOTH COUNT, ATB GRIND AND 20° HOOK TO CLEAR SAWDUST AND PREVENT BURNING. GENERAL PURPOSE BLADE HAD 28 TOOTH COUNT, ABT GRIND AND 12° HOOK IS A COMBINATION BLADE FOR SOLID STOCK. SMOOTH FINISH HAS 48 TOOTH COUNT, ATB GRIND AND 5° HOOK TO HELP PREVENT CHIP OUT ON CROSSCUTS AND IS IDEAL FOR PROCESSING SHEET GOODS INCLUDING MELAMINE. ALL BLADES FEATURE LASER CUT PLATES, ANTI-VIBRATION TECHNOLOGY, PRE-TENSIONED PLATES, HEAT EXPANSION SLOTS, FREUD® MICRO-GRAIN CARBIDE AND PERMA-SHIELD® NON-STICK COATING. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LM75R010 10" THIN KERF GLUE LINE RIP BLADE DELIVERS GLASS SMOOTH RIPS EVERY TIME
|
| 10"x30t Thin Kerf Glue Line Rip
|
|
THIN KERF DESIGN IS IDEAL FOR UNDERPOWERED SAWS OF LESS THAN 3HP OR FOR ANY APPLICATION WHERE MATERIAL SAVINGS ARE CRITICAL. PRODUCES EDGES THAT ARE READY FOR GLUE UP WITH NO NEED FOR JOINTING OR SANDING AFTER THE CUT. UNIQUE ANTI-VIBRATION DESIGN DRASTICALLY REDUCES VIBRATION AND SIDEWAYS MOVEMENT IN THE CUT TO EXTEND THE BLADE LIFE WHILE PROVIDING A CRISP, SWIRL-FREE FLAWLESS FINISH. EXCELLENT FOR STOCK UP TO 3/4" THICK. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® PREMIER FUSION™ 10" CIRCULAR SAWBLADE
|
| P410 10" X 40t Hi-atb Blade
...plus other(s)
|
A DOUBLE SIDE GROUND DESIGN FUSED WITH 30° HI-ATM TOOTH GEOMETRY MEAN THE NEW FREUD® F410 PREMIER FUSION™ 10" CIRCULAR SAWBLADE CAN PRODUCE FLAWLESS TOP, BOTTOM AND SIDE CUTS IN VENEERED PLYWOOD, HARDWOODS AND MELAMINE:
40 HI-ATB TICO™ CARBIDE TEETH, +18° HOOK ANGLE, 0.126 KERF, 0.098 PLATE, 5/8" ARBOR. 3/8" TO 1-1/2" DEEP RIP CUTS; 3/4" TO 3-1/2" DEEP CROSSCUTS. NON-STICK PERMA-SHIELD™ COATING RESISTS FRICTION, HEAT BUILDUP AND PITCH BUILD-UP. LASER CUT SLOTS MINIMIZE VIBRATION. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU73M HEAVY DUTY CROSSCUTTING BLADES FOR THE INDUSTRIAL CABINETMAKER
|
| 8" X 48t Cabinetmaker's Crosscut Blade
...plus other(s)
|
POLISHED METAL, CARBIDE TIPPED FREUD® LU73M SAWBLADES ARE PRIMARILY DESIGNED FOR HEAVY CROSSCUT USE IN A CABINETMAKERS' SHOPS:
ALTERNATE TOP BEVEL TOOTH DESIGN PROVIDES QUALITY CUTS. PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE FLAT AND TRUE. USE ON HARDWOOD, SOFTWOOD, PLYWOOD, LAMINATE AND PARTICLE BOARD - 1/2" MINIMUM DEPTH OF CUT, 2-3/4" MAXIMUM. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® BOX JOINT CUTTER SET
|
| Box Joint Cutter
|
THE PATENTED FREUD® SBOX8 BOX JOINT CUTTER SET PROVIDES A SIMPLE AND ACCURATE WAY TO CUT PERFECTLY SQUARE, CHIP FREE, FLAT BOTTOM BOX JOINTS WITHOUT SHIMS OR AWKWARD ADJUSTMENTS:
SIMPLY INSTALL THE 8" DIA., 5/8" ARBOR BLADES ON YOUR TABLE SAW (BACK-TO-BACK FOR 1/4" BOX JOINTS; FACE-TO-FACE FOR 3/8") AND FOLLOW ENCLOSED DIRECTIONS TO BUILD A JIG TO USE WITH YOUR SAW'S MITER GAUGE. TICO™ HI-DENSITY CARBIDE FOR A SMOOTHER FINISH AND LONGER LIFE. UNIQUE TOOTH DESIGN DELIVERS CLEAN CUTS THROUGH END GRAIN. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU74R THIN KERF CROSSCUT SAWBLADES FEATURE PERMA-SHIELD™ PROTECTION
|
| 8"x64t Abt Thn Krf Crosscut Blade
...plus other(s)
|
FREUD® LU74R PERMA-SHIELD™ SAWBLADES PRODUCE A FINE FINISH WHEN CROSSCUTTING HARDWOODS, SOFTWOODS AND MOLDINGS:
USE ON HARDWOOD, SOFTWOOD, PLYWOOD AND PARTICLE BOARD; 1/4" MINIMUM DEPTH OF CUT, 1-5/8" MAXIMUM. NON-STICK COATING HELPS MAKE THE BLADE RESISTANT TO HEAT BUILDUP AND CORROSION - LASER CUT SLOTS REDUCE VIBRATION AND SIDEWAYS MOVEMENT. THIN KERF FOR EASIER FEEDING AND REDUCED WASTE. 5° POSITIVE HOOK ANGLE; AVAILABLE IN 8" AND 10" DIAMETERS (5/8" ARBORS) OR 12" AND 14" DIAMETERS (1" ARBORS). 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® 10" LU83R THIN KERF COMBINATION SAWBLADE CUTS SMOOTHER, QUIETER AND WITH LESS WASTE
|
| 10x50t Thin Kerf Combination Blade
...plus other(s)
|
THE 10" DIA. FREUD® LU83R THIN KERF COMBINATION SAWBLADE REMOVES LESS MATERIAL, WHICH REDUCES WASTE AND MEANS EASIER FEEDING:
CUTS ARE QUIETER AND SMOOTHER WITH A SUPERIOR FINISH. ANTI-VIBRATION DESIGN ELIMINATES SIDEWAYS MOTION AND THE NEED FOR BLADE STABILIZERS. 50 TEETH (ATB WITH FLAT), 10° POSITIVE HOOK ANGLE, 0.091" KERF, 0.071" PLATE - 5/8" ARBOR. OVERSIZE CARBIDE TEETH PROVIDE UP TO 4 TIMES MORE SHARPENINGS THAN ORDINARY SAWBLADES. NON-STICK PERMA-SHIELD™ COATING MAKES BLADE RESISTANT TO HEAT BUILDUP AND CORROSION. LIMITED LIFETIME MANUFACTURER'S WARRANTY. 102-044, 102-047 - YOU CAN GET STRAIGHTER, QUIETER CUTS USING SAWBLADE STIFFENERS. 4" OR 5" DIA. RIGID STEEL - 1/8" THICK WITH 5/8" DIA. ARBOR. NOTE: ONLY USE ON 10" DIA. OR SMALLER BLADES. ITALY.
|
|
|
|
Sawblades - Circular
|
DIABLO™ METAL CUTTING SAWBLADES DESIGNED FOR HEAVY DUTY, BURR FREE CUTS
|
| 7-1/4" X 56t X 5/8" Non-ferrous Metal
...plus other(s)
|
FREUD® DIABLO™ METAL CUTTING SAWBLADES HAVE WHAT IT TAKES FOR ON THE JOB CUTTING OF COPPER PIPE, ALUMINUM EXTRUSIONS, BRASS PLATE OR STEEL STUDS, PIPES AND SHEET STEEL:
LASER CUT BODIES FOR LONGER LIFE AND PRECISION CUTS. LASER CUT STABILIZER VENTS REDUCE NOISE AND VIBRATION. LASER CUT HEAT EXPANSION SLOTS ALLOW BLADE TO EXPAND DUE TO HEAT BUILDUP, KEEPING CUTS STRAIGHT AND TRUE. RED, PERMA-SHIELD™ COATING SHIELDS BLADES AGAINST HEAT AND CORROSION. BLADES COVERED BY MANUFACTURER'S LIMITED LIFETIME WARRANTY.
DIABLO™ NON-FERROUS METAL BLADES HAVE DURABLE MICROGRAIN TITANIUM CARBIDE TEETH FOR RAZOR SHARP CUTS AND LONGER LIFE. ALSO WORK ON PLASTIC: 122-990 - 7-1/4" X 56TCG, -6° HOOK ANGLE, 5/8" ARBOR, 0.106 KERF, 0.087 PLATE. 122-993 - 10" X 80TCG, -5° HOOK ANGLE, 5/8" ARBOR, 0.091 KERF, 0.071 PLATE. 122-996 - 12" X 96TCG, -5° HOOK ANGLE, 1" ARBOR, 0.091 KERF, 0.071 PLATE.
DIABLO™ STEEL DEMON™ FERROUS METAL BLADES HAVE SPECIALLY FORMULATED TUNGSTEN-TITANIUM TEETH WITH TRI-METAL SHOCK RESISTANT BRAZING TO WITHSTAND IMPACT, REDUCE WEAR AND LAST LONGER. USE ON STEEL STUDS, UNISTRUT™, ALL THREAD™, FLAT BAR, ANGLE IRON AND EMT CONDUIT: 122-999 - 7" X 48TCG, -2° HOOK ANGLE, 5/8" ARBOR, 0.103 KERF, 0.090 PLATE. 123-005 - 10" X 50TCG, -2° HOOK ANGLE, 5/8" ARBOR, 0.114 KERF, 0.098 PLATE. 123-008 - 12" X 60TCG, -2° HOOK ANGLE, 1" ARBOR, 0.114 KERF, 0.098 PLATE. 123-017 - 14" X 72TCG, -2° HOOK ANGLE, 1" ARBOR, 0.114 KERF, 0.098 PLATE. ONLY USE 123-005, 123-008 AND 123-017 ON DEDICATED, METAL CUTTING SAWS (1,800 MAXIMUM RPM).
|
|
|
|
Sawblades - Circular
|
DIABLO™ CONSTRUCTION SERIES SAW BLADES PROVIDE MORE WORK, LESS CHATTER
|
| 7-1/4" X 24t X 5/8" Framing Blade, Atb
...plus other(s)
|
FREUD® DIABLO™ CONSTRUCTION SERIES SAW BLADES HAVE BEEN SPECIFICALLY BUILT TO MEET THE NEEDS OF THE CONSTRUCTION AND REMODELING MARKETS:
LASER CUT ARBORS, STABILIZER VENTS AND HEAT EXPANSION SLOTS. MICROGRAIN TITANIUM CARBIDE TEETH FOR DURABILITY AND LONGER CUTTING LIFE; IDEAL FOR WET LUMBER. RED, PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. FRAMING BLADES REQUIRE LESS POWER FROM THE SAW, EXTENDING ITS LIFE. RIPPING AND GENERAL PURPOSE BLADES - OAK, PINE, PRESSURE TREATED LUMBER AND PLYWOOD. COMBINATION AND FINISH BLADES - GOOD CHOICES FOR PLYWOOD. FINE FINISH BLADES - OAK, PINE, MELAMINE, PLYWOOD AND MOLDING CROSSCUTTING. ULTRA FINISH BLADES - OAK, PINE, MELAMINE, VENEER PLYWOOD AND DELICATE MOLDING CROSSCUTTING. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® 10" CIRCULAR SAWBLADES RIP GLUE LINES, SLICE THROUGH SOLID SURFACES LIKE CORIAN® AND MAKE SHORT WORK OF LAMINATES
|
| 10"x30t Glue Line Rip
...plus other(s)
|
LASER CUT (NOT STAMPED) BLADES, LASER CUT HEAT EXPANSION SLOTS, LASER CUT 5/8" ARBORS, TO REDUCE VIBRATION, AND STRONG TICO™ CARBIDE TEETH ARE WHY FREUD® INDUSTRIAL 10" CIRCULAR SAWBLADES MAKE THE JOB EASIER AND MORE ACCURATE:
LM74 GLUE LINE RIP 30-TOOTH SAWBLADES ARE DESIGNED FOR CREATING A GLUE LINE RIP IN MATERIALS 1" AND UNDER. TRIPLE CHIP GRIND (TCG) TEETH PRODUCE EXTREMELY SMOOTH, TRUE SURFACES FOR GLUING AND FINISHING WORK - 12° HOOK ANGLE. LU95 SOLID SURFACE 72-TOOTH HEAVY DUTY SAWBLADES SLICE THOROUGH MATERIALS LIKE DUPONT CORIAN®, WILSONART GIBRALTAR® AND SSV FOUNTAINHEAD®, FLAWLESSLY. TCG BLADE LEAVES SURFACES BURN AND SWIRL FREE - 0° HOOK ANGLE. LU97 DOUBLE SIDED LAMINATE/MELAMINE 80-TOOTH SAWBLADES MINIMIZE CHATTER AND VIBRATION AND WITHSTAND ABRASIVE LAMINATES WITHOUT GIVING UP BLADE LIFE. TCG TEETH - NO SCORING BLADE REQUIRED - -3° HOOK ANGLE. AVAILABLE WITH POLISHED SILVER ICE™ SURFACE OR RED, NON-STICK PERMA-SHIELD™ COATING MAKES THAT BLADES RESISTANT TO FRICTION, HEAT AND PITCH BUILDUP. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU94M INDUSTRIAL PLASTICS SAWBLADES
|
| 8"x64t Plastics Blade
...plus other(s)
|
FREUD® LU94M INDUSTRIAL PLASTICS SAWBLADES CLEANLY CUT ACRYLIC, POLYCARBONATE, VINYL AND MOST OTHER PLASTICS WITHOUT MELTING:
THICK MICROGRAIN CARBIDE TIPS. LASER CUT BLADE BODIES AND EXPANSION SLOTS. KICKBACK REDUCING DESIGN. TRI-METAL BRAZING FOR IMPACT RESISTANCE. -3° HOOK ANGLE - MTCG GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU90M INDUSTRIAL THIN STOCK NON-FERROUS METALS' BLADES
|
| 10"x100t Thin Stock Nonferrous
...plus other(s)
|
FREUD® LU90M 10" AND 12" INDUSTRIAL THIN STOCK NON-FERROUS METALS' BLADES WERE SPECIFICALLY DESIGNED TO CUT THIN, NONFERROUS METAL EXTRUSIONS SUCH AS ALUMINUM STORM WINDOW FRAMES WITHOUT DAMAGING DELICATE PROFILES. (AMPLE USE OF LIQUID LUBRICANT RECOMMENDED WHEN CUTTING - WAX STICKS NOT RECOMMENDED.):
BLADES CUT CLEANLY AND QUICKLY THROUGH NONFERROUS MATERIALS WITHOUT BINDING. LASER CUT BLADE BODIES AND EXPANSION SLOTS. KICKBACK REDUCING DESIGN. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 5° HOOK ANGLE - TCG GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU81M INDUSTRIAL STACKED CHIPBOARD SAWBLADES
|
| 8"x34t Stacked Chipboard Blade
...plus other(s)
|
FREUD® LU81M INDUSTRIAL STACKED CHIPBOARD SAWBLADES ARE PERFECT FOR FAST SIZING THICK OR STACKED CHIPBOARD UP TO 3-1/2" HIGH:
WORKS WELL FOR HARD AND SOFT WOODS OR PLYWOOD WHERE SURFACE FINISH IS LESS IMPORTANT THAN CUT SPEED. THICK MICROGRAIN CARBIDE TIPS. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 13° HOOK ANGLE - TCG GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU71M HEAVY DUTY GENERAL PURPOSE SAWBLADES
|
| 14"x42t Hd General Purpose Blade
...plus other(s)
|
FREUD® LU71M HEAVY DUTY GENERAL PURPOSE SAWBLADES ARE THE WORKHORSES OF THE COMPANY'S BLADES:
IDEAL FOR FAST SIZING THICK STOCK. 1/4" TO 1-1/4" RIPPING RANGE - 1-1/2" TO 3-1/2" CROSSCUT RANGE. MICROGRAIN CARBIDE TIPS. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 15° HOOK ANGLE - ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU72M INDUSTRIAL THICK STOCK GENERAL PURPOSE SAWBLADES
|
| 8"x34t Thick Stock General Purpose
...plus other(s)
|
FREUD® LU72M INDUSTRIAL THICK STOCK GENERAL PURPOSE SAWBLADES ARE THE BEST CHOICE FOR PRODUCTION SIZING OF HARD OR SOFT WOODS:
CUT WOOD UP TO 3-1/2" THICK WITH MITER BOX. MICROGRAIN CARBIDE TIPS. TRI-METAL BRAZING FOR IMPACT RESISTANCE. 13° HOOK ANGLE - ATB GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LM71M THICK STOCK RIP SAWBLADES
|
| 10"x18t Thick Stock Rip Blade
...plus other(s)
|
FREUD® LM71M THICK STOCK RIP SAWBLADES OFFER ALL THE QUALITY THAT FINE CABINETMAKERS EXPECT:
MICROGRAIN CARBIDE TIPS THICK ENOUGH FOR SEVERAL SHARPENINGS. TRI-METAL BRAZING FOR IMPACT RESISTANCE TO ENSURE LONGER LIFE. 20° HOOK ANGLE - FLAT GRIND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® LU98 SINGLE SIDED LAMINATE/MELAMINE SAWBLADES CUT SMOOTHER AND LAST LONGER
|
| 7" Laminate/melamine Sawblade
...plus other(s)
|
CARBIDE TIPPED FREUD® LU98R SAWBLADES ARE LONG LIFE PRODUCTION BLADES FOR CHIP FREE SINGLE-SIDED LAMINATES, PARTICLE BOARD OR OTHER CUTTING:
1/4" MINIMUM CUT; 1-5/8" MAXIMUM. NON-STICK PERMA-SHIELD™ COATING MAKES BLADES RESISTANT TO FRICTION AND HEAT BUILDUP. MODIFIED TRIPLE CHIP GRIND - PRECISION TENSIONING WITH COMPUTER CONTROLLED EQUIPMENT KEEPS BLADE FLAT AND TRUE. FREUD® LU98M SAWBLADES ARE SIMILAR BUT DO NOT HAVE THE PERMA-SHIELD™ COATING - LIMITED TO QUANTITIES ON HAND. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® QUALITY AND CRAFTSMANSHIP IN AFFORDABLE 6" AND 8" DIAMETER STACK DADOES
|
| Sd206 6" Pro Dado Set
...plus other(s)
|
|
NEGATIVE HOOK ANGLES CUT FLAT BOTTOM GROOVES AND VIRTUALLY SPLINTER FREE CUTS. TWO OUTSIDE BLADES COMBINE WITH THE 5 TWO-WING CHIPPERS: FOUR 1/8" AND ONE 1/16" TO CUT DADOS FROM 1/4" TO 13/16" IN 1/16" INCREMENTS. 5/8" ARBORS: 6" DADO SET HAS 10 TEETH; 8", 12 TEETH. ANTI-KICKBACK DESIGN WITH RESHARPENABLE CARBIDE TIPS FOR YEARS OF USE. INCLUDES SHIM SET FOR FINE ADJUSTMENTS. NOT RECOMMENDED FOR FERROUS METALS OR MASONRY.
|
|
|
|
Advanced Search Tools
Browse
