|
|
|
Bits Router/flush & Laminate Trimming/bevel
|
WOODTEK LAMINATE EDGE BEVEL ROUTER BIT WITH BEARING
|
| 7 Deg Chamfer Bit,1/4"shnk
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED BEVEL TRIM ROUTER BITS TRIM AND PROVIDE A 7° BEVEL WHEN WORKING WITH PLASTIC LAMINATES - USE WITH PORTABLE ROUTERS AND LAMINATE TRIMMERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952."
|
|
|
|
Bits Router/flush & Laminate Trimming/bevel
|
FREUD® FLUSH AND BEVEL TRIM ROUTER BITS
|
| 15/32" Flush/bevel Trim 1/4"shank
...plus other(s)
|
FREUD® 41-300 (SHOWN), 41-402 AND 68-100 FLUSH AND BEVEL TRIM ROUTER BITS HAVE BEEN SPECIFICALLY DESIGNED TO TRIM PLASTIC LAMINATE WITH STRAIGHT OR BEVEL EDGES USING A ROUTER EQUIPPED WITH A GUIDE SYSTEM:
41-402 IS SELF-GUIDED AND COMES WITH TWO BEARINGS THAT SPREAD WEAR EVENLY ON THE CUTTING EDGE AND ALLOW THE BIT TO STRAIGHT TRIM OR CREATE A 45° BEVEL. 68-100 IS SOLID CARBIDE. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS LAMINATE TRIMMERS. ITALY.
|
|
|
|
Bits Router/flush & Laminate Trimming/bevel
|
BOSCH SOLID CARBIDE ROUTER TRIM BITS
|
| 85285 Solid Carb Trim Bit
...plus other(s)
|
SELF PILOTING BOSCH SOLID CARBIDE ROUTER TRIM BITS CUT ALL PLASTIC LAMINATES, QUICKLY AND CLEANLY:
132-209 - FLUSH CUT. 132-211 - FLUSH/10° CUT. USE ON HAND HELD ROUTERS AND LAMINATE TRIMMERS. IMPORTED.
|
|
|
|
Bits Router/flush & Laminate Trimming/bevel
|
FREUD® BEVEL TRIM ROUTER BITS
|
| 19/32" Bevel Trim W/brg-1/4"shank
...plus other(s)
|
CARBIDE TIPPED FREUD® BEVEL TRIM ROUTER BITS WILL CUT A RANGE OF BEVELS FROM 7° TO 45° ON PLASTIC LAMINATES:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. #66-100 IS SOLID CARBIDE. USE ON PORTABLE ROUTERS AND LAMINATE TRIMMERS. 1/4" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/flush & Laminate Trimming/classic
|
WOODTEK LAMINATE BEVEL & FLUSH TRIM ROUTER BIT
|
| 1/2" Bevel & Flush Trim Bit
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED BEVEL AND FLUSH TRIM ROUTER BITS ARE DESIGNED TO TRIM PLASTIC LAMINATE WITH A BEVEL OR STRAIGHT EDGE USING A ROUTER WITH A GUIDE SYSTEM - USE WITH PORTABLE ROUTERS AND LAMINATE TRIMMERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" SHANKS. IMPORTED."
|
|
|
|
Bits Router/flush & Laminate Trimming/classic
|
WOODTEK 3 FLUTE FLUSH TRIM ROUTER BIT
|
| 1/2" Lam Trim Bit, 3flt, 1/4"shft
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED THREE FLUTE FLUSH CUT ROUTER TRIMMER BITS HELP ENSURE CHIP-FREE LAMINATE AND OTHER TRIMMING - USE WITH HAND-HELD PORTABLE ROUTERS AND LAMINATE TRIMMERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952."
|
|
|
|
Bits Router/flush & Laminate Trimming/classic
|
WOODTEK 3 FLUTE LAMINATE FLUSH TRIM ROUTER BIT
|
| 1" Lam Trim Bit, 3flt, 1/4"shft
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED THREE FLUTE ROUTER TRIMMER BITS HELP ENSURE CHIP-FREE LAMINATE AND OTHER TRIMMING - USE WITH HAND-HELD PORTABLE ROUTERS AND LAMINATE TRIMMERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952."
|
|
|
|
Bits Router/flush & Laminate Trimming/dado Clean Out
|
WOODTEK 3/4" DADO CLEANOUT ROUTER BIT"
|
| 43247 1-1/2"dado Cleanout Bit
...plus other(s)
|
|
|
|
Bits Router/flush & Laminate Trimming/euro-trimmer (square Bearing)
|
ELIMINATE STICKY BEARINGS WHEN TRIMMING LAMINATES
|
| Repl Teflon Bearing For 1/2" Et
...plus other(s)
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim (bottom Bearing)
|
WOODTEK FLUSH TRIM ROUTER BIT
|
| 1/2" Flush Trim Bit,1/4" Shnk
...plus other(s)
|
TWO-FLUTE WOODTEK® CARBIDE-TIPPED STRAIGHT FLUSH TRIMMER ROUTER BITS HELP ENSURE CHIP-FREE LAMINATE AND OTHER TRIMMING - USE WITH HAND-HELD ROUTERS AND LAMINATE TRIMMERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952."
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim (bottom Bearing)
|
FREUD® BEARING FLUSH TRIM ROUTER BITS
|
| 7/8" Dia X 1" Flush Trim Bit 2 Flute
...plus other(s)
|
CARBIDE TIPPED, TWO FLUTE FREUD® BEARING FLUSH TRIM ROUTER BITS ARE IDEAL FOR TRIMMING LAMINATE COUNTERTOPS AS WELL AS FOR PATTERN WORK:
PILOT BEARINGS ENSURE GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" AND 1/2" SHANKS. 44-100, 44-102, 44-104 AND 44-108 HAVE THREE FLUTES. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim (bottom Bearing)
|
BOSCH TWO-FLUTE LAMINATE FLUSH TRIM ROUTER BITS
|
| 85266 Trim Bit Ctbb
...plus other(s)
|
BOSCH TWO-FLUTE LAMINATE FLUSH TRIM ROUTER BITS REDUCE CHIPPING AND PROVIDE SMOOTH CUTS:
CUT ALL SOFT WOOD, HARDWOOD, PLYWOOD AND COMPOSITION MATERIALS. PILOT BEARINGS ENSURE GREATER CONTROL AND ACCURACY. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
891-952 - WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - CLICK HERE.
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim (bottom Bearing)
|
BOSCH THREE-FLUTE, LAMINATE FLUSH TRIM ROUTER BITS
|
| 85602m 1/2"flush Trim-3f-1-1/2"
|
CARBIDE TIPPED BOSCH THREE FLUTE 85602M LAMINATE FLUSH TRIM ROUTER BITS CUT EASILY AND QUICKLY:
PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. CUT ALL PLASTIC LAMINATES. USE ON HAND HELD ROUTERS AND LAMINATE TRIMMERS. 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim (bottom Bearing)
|
WOODTEK 3/8 AND 1/2 INCH LAMINATE TRIM BIT
|
| 42921 3/8"laminate Trim Bit
...plus other(s)
|
CARBIDE TIPPED LAMINATE TRIM ROUTER BITS CUT HARDWOOD, SOFTWOOD, PLYWOOD AND ALL COMPOSITION MATERIALS. USE WITH TABLE MOUNTED PORTABLE ROUTERS:
819-542 - 1/2" DIA.; 1/2"H; 45°; 1-3/4" OVERALL. 819-005 - 1/2" DIA.; 1/2"H; 45°; 2-3/16" OVERALL. 819-019 - 1/2" DIA.; 1"H; 45°; 2-3/16" OVERALL. 1/4" SHANKS. IMPORTED.
LIMITED TO QUANTITIES ON HAND"
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim (bottom Bearing)
|
WOODTEK® THREE FLUTE BEVEL TRIMMER ROUTER BITS
|
| 72323 3 Flute Laminate Trim Bit
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED THREE FLUTE BEVEL TRIMMER ROUTER BITS HELP ENSURE CHIP-FREE LAMINATE AND OTHER TRIMMING - USE WITH HAND-HELD PORTABLE ROUTERS AND LAMINATE TRIMMERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim V-groove
|
FREUD® FLUSH TRIM "V" GROOVE ROUTER BITS
|
| 5/8 Flush Trim "v" Groove 1/4"shk
...plus other(s)
|
FREUD® 48-102 AND 48-112 FLUSH TRIM "V" GROOVE ROUTER BITS ADD SMALL, DECORATIVE GROOVES WHEN BRINGING A CABINET FRAME FLUSH WITH THE FRONT OF THE CABINET OR WHEN TRIMMING A LAMINATED TOP:
CUT ALL COMPOSITION MATERIALS, PLYWOODS, HARDWOODS AND SOFT WOODS. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. ITALY.
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim V-groove
|
WOODTEK FLUSH TRIM V GROOVING ROUTER BIT
|
| Flush Trim V Grooving Bit
...plus other(s)
|
FOR USE IN FINISHING INSIDE LAMINATED DRAWERS TO ALLOW ENDS TO SET FLUSH, WOODTEK® CARBIDE-TIPPED FLUSH TRIM "V" GROOVING ROUTER BITS CAN ALSO BE USED AS DECORATIVE FLUSH TRIM BITS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952."
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim-shearing
|
FREUD® DOWNSHEAR HELIX FLUSH TRIM ROUTER BIT
|
| Downshear Helix Flush Trim Bit
|
THE FREUD® DOWNSHEAR HELIX FLUSH TRIM ROUTER BIT FEATURES A DOWNSHEAR CUTTING ANGLE THAT PRODUCES A SLICING ACTION FOR CHIP AND SPLINTER FREE CUTS ON LAMINATES AND VENEERS:
TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. PILOT BEARING ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim-shearing
|
WOODTEK FLUSH TRIM ROUTER BIT
|
| 1/2" Shear Cut Flush Trim Bit
|
WOODTEK® CARBIDE-TIPPED FLUSH TRIM ROUTER BITS ARE GREAT FOR PATTERN TRIMMING AS WELL AS TRIMMING CABINET LAMINATE - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952."
|
|
|
|
Bits Router/flush & Laminate Trimming/flush Trim-top & Bottom Bearing
|
FREUD® TOP AND BOTTOM BEARING FLUSH TRIM ROUTER BITS
|
| Top & Bottom Bearing Flush Trim
...plus other(s)
|
FREUD® TOP AND BOTTOM BEARING FLUSH TRIM ROUTER BITS HAVE BEEN SPECIALLY DESIGNED TO PROVIDE PRECISION CUTS IN ALMOST ANY TRIMMING OR PATTERN ROUTING APPLICATION:
TICO™ HIGH DENSITY CARBIDE WITH TITANIUM MAINTAINS A SHARP EDGE AND CUTS CLEANLY IN A VARIETY OF MATERIALS. PILOT BEARINGS ENSURE GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
