Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Bits Drill And Boring (8)
Forstner (8)
|
|
|
Bits Drill And Boring - Forstner
|
WOODTEK® HIGH SPEED STEEL FRACTIONAL AND METRIC FORSTNER BITS
|
| 1/4" Forstner Bit 3/8" Shank
...plus other(s)
|
WOODTEK® HIGH SPEED STEEL FRACTIONAL AND METRIC FORSTNER BITS PRODUCE PERFECTLY SMOOTH, FLAT BOTTOMED AND CLEAN SIDED HOLES IN SOLID WOOD, COMPOSITES AND PLYWOOD. THEY ALSO BORE OVERLAPPING HOLES AND POCKET HOLES FOR GREATER VERSATILITY:
THESE GENERAL PURPOSE BITS ARE MANUFACTURED FROM HIGH CARBON TOOL STEEL (HIGH SPEED STEEL) FOR DURABILITY SHANKS ARE SPECIALLY HARDENED, AND HEAT TREATED. USE IN PORTABLE DRILLS (NOT RECOMMENDED FOR BITS LARGER THAN 2") AND DRILL PRESSES. PURCHASE INDIVIDUALLY OR IN SETS.
GENERAL PURPOSE FORSTNER BIT SETS WITH FITTED CASES (3/8" SHANKS):
880-735 - 16 PIECE SET: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-3/8", 1-1/2", 1-5/8", 1-3/4", 1-7/8", 2", 2-1/8". 880-728 - 7 PIECE SET: 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1". 830-207 - 16 PIECE SET: 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16", 1-1/16", 1-3/16", 1-5/16", 1-7/16", 1-9/16", 1-11/16", 1-13/16", 1-15/16", 2-1/6". 836-723 - 7 PIECE SET: 3/16", 5/16", 7/16", 9/16", 11/16", 13/16", 15/16".
METRIC SIZED BITS ALLOW FOR EXACT MATCHING OF METRIC SIZED HARDWARE. IDEAL FOR CLOCK FITUPS AND LARGER PROJECTS, LARGER DIAMETER BITS IN FRACTIONAL SIZES HAVE MULTI SPUR RIM FOR BETTER CUTTING AND REDUCED FEED PRESSURE REQUIREMENT AVAILABLE IN SIZES FROM 2-1/2" DIAMETER THROUGH 4" DIAMETER BY 1/8" INCREMENTS, ALL WITH 1/2" DIAMETER SHANKS TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SLIPSTOP™ NON-MARRING DEPTH STOPS FOR FORSTNER BITS - 915-975.
|
|
|
|
Bits Drill And Boring - Forstner
|
FREUD® CARBIDE FORSTNER BITS CONSISTENTLY PROVIDE SMOOTH SIDED, FLAT BOTTOM HOLES
|
| 7-pc Carbide Tipped Forstner Bit Set
...plus other(s)
|
THE SUPER SHARP CUTTING EDGES OF FREUD® CARBIDE FORSTNER BITS OUTPERFORM AND OUTLAST STEEL BY A TREMENDOUS MARGIN WHEN WORKING IN ANY MATERIAL, INCLUDING PLASTIC LAMINATES:
BITS CUT WITH OUTSIDE RIM USING A CENTERING POINT THAT PROTRUDES ABOUT 0.07". 3-1/2"L WITH 3/8" DIA. OR SMALLER SHANKS. FC-107 7 PIECE SET INCLUDES 1/4", 3/8", 1/2", 5/8", 3/4", 1", 1-3/8" DIA. BITS IN FITTED WOODEN CASE. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SLIPSTOP™ NON-MARRING DEPTH STOPS FOR FORSTNER BITS - 915-975.
|
|
|
|
Bits Drill And Boring - Forstner
|
USE AUGER BITS SPECIALLY DESIGNED FOR POWER DRILLS
|
| 5/16" Auger Bit 1/4" Shank
...plus other(s)
|
SPECIALLY DESIGNED TO WORK IN POWER DRILLS, THESE AUGER BITS HAVE SHANKS THAT WON'T SLIP IN CHUCKS. BITS DRILL CLEAN HOLES DEEPER THAN REGULAR BITS:
523-054 - 5/16" DIA.; 1/4" SHANK; 5" CUT DEPTH. 523-056 - 7/16" DIA.; 3/8" SHANK; 6" CUT DEPTH. 523-058 - 5/8" DIA.; 3/8" SHANK; 6" CUT DEPTH. 523-060 - 7/8" DIA.; 1/2" SHANK; 6" CUT DEPTH. AUSTRIA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Bits Drill And Boring - Forstner
|
WOODTEK® LARGE DIAMETER MULTI SPUR FORSTNER BITS
|
| 3" Multi Spur Bit 1/2" Shank
...plus other(s)
|
WOODTEK® MULTI-SPUR FORSTNER BITS LEAVE A CLEAN SIDED, FLAT BOTTOM HOLE - GREAT FOR MORTISING, CLOCK MAKING AND BORING ANGLED POCKET HOLES:
ADDITIONAL CUTTING SPURS ON RIM HELP DISSIPATE EXTRA HEAT BUILT UP BY HIGHER RIM SPEEDS OF LARGER BITS (DRILL PRESS USE ONLY). 1/2" SHANKS. ORDER THE EIGHT PIECE SET AND SAVE! IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SLIPSTOP™ NON-MARRING DEPTH STOPS FOR FORSTNER BITS - 915-975.
|
|
|
|
Bits Drill And Boring - Forstner
|
BLUM® 295.1000 DRAWER FRONT ADJUSTERS
|
| 20mm Forstner Bit
...plus other(s)
|
USE 195.1000 BLUM® ADJUSTERS TO ALIGN DRAWER FRONTS FOR A UNIFORM APPEARANCE.ADJUST HEIGHT AND SIDE-TO-SIDE BY 5MM (3/16") - SOLD IN BAGS OF 10 PAIR OR BOXES OF 1,000:
NYLON HOUSING WITH PRE-MOUNTED #8-32 STEEL NUT. USE ON FOUR SIDED WOODEN DRAWERS. FIT 20MM BORE, 10.5MM DEEP. USE #8-32 MACHINE SCREWS TO MOUNT FRONT TO DRAWER (OPTIONAL #8-32 X 1-3/4" BREAKAWAY SCREWS 807-128 - SCORED IN 1/4" INCREMENTS - PROVIDE A 3/4" TO 1-3/4" WORKING LENGTH). 65.2950.10 - OPTIONAL MARKING GAUGE SIMPLIFIES LOCATING SCREW HOLES IN THE DRAWER BOX - STANDARD BORING FOR DRAWER FRONT ADJUSTERS ALLOWS MARKING GAUGE TO FUNCTION LIKE A DOWEL CENTER TO MARK BORING LOCATIONS. 135-671, 913-686 - DRILL BITS SOLD SEPARATELY. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Forstner
|
WOODTEK® STAINLESS STEEL FORSTNER BITS
|
| 1/4" Ss Forstner Bit 1/4" Hex Sh
...plus other(s)
|
WOODTEK® STAINLESS STEEL FORSTNER BITS ARE THE BEST FOR TREATED MATERIAL, GREEN WOOD OR HIGH MOISTURE PROJECTS THAT MIGHT RUST STANDARD STEEL BITS. MANUFACTURED FROM METAL SIMILAR TO THAT USED IN HIGH QUALITY SCANDINAVIAN AND JAPANESE TOOLS, WOODTEK® STAINLESS STEEL FORSTNER BITS PERFORM ESPECIALLY WELL WHEN CUTTING ACIDIC WOODS LIKE OAK:
HEAT TREATED CUTTERS LAST LONGER THAN REGULAR STEEL SINCE MICRO-EROSION AND CORROSION ARE GREATLY REDUCED. HEX SHANKS OFFER POSITIVE GRIP IN ALL DRILL CHUCKS. PRODUCES EXTRA CLEAN RIMS AND FLAT BOTTOMS. EXCELLENT FOR BORING OVERLAPPING HOLES TO CREATE MORTISES. 16 PIECE STAINLESS STEEL FORSTNER BIT SET INCLUDES 1/4" TO 2-1/8" BITS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SLIPSTOP™ NON-MARRING DEPTH STOPS FOR FORSTNER BITS - 915-975.
|
|
|
|
Bits Drill And Boring - Forstner
|
WOODTEK® CARBIDE TIPPED FORSTNER BITS
|
| 26mm Carbide Tipped Forstner Bit
...plus other(s)
|
WOODTEK® HIGH QUALITY CARBIDE TIPPED FORSTNER BITS EXCEL IN WOODWORKING BECAUSE THEY LEAVE SMOOTH SIDED, FLAT BOTTOM HOLES IN NEARLY ALL COMMON WOODWORKING MATERIAL, INCLUDING COMPOSITES:
BITS CAN ALSO BE USED TO CUT ARCS (PARTIAL CIRCLES ON THE EDGE OF A BOARD). TOUGH CARBIDE TIPS PROVIDE ADDED DURABILITY WHEN BORING TOUGH MATERIALS LIKE MAN MADE COMPOSITES. BITS ARE ABOUT 3-1/2" LONG WITH 3/8" SHANKS (EXCEPT 1/4" BIT WITH 1/4" SHANK). FRACTIONAL SIZES AVAILABLE INDIVIDUALLY OR IN SETS. 16 PIECE SET INCLUDES 1/4" TO 2-1/8" DIAMETER BITS AND WOODEN CASE. 7 PIECE SET COMES WITH 1/4", 3/8", 1/2", 5/8", 3/4" AND 1" BITS ALONG WITH A 1-3/8" DIAMETER BIT IN A WOODEN CASE. METRIC SIZES ONLY AVAILABLE INDIVIDUALLY. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SLIPSTOP™ NON-MARRING DEPTH STOPS FOR FORSTNER BITS - 915-975.
|
|
|
|
Bits Drill And Boring - Forstner
|
WOODTEK® TITANIUM COATED FORSTNER BITS
|
| 16pc Titanium Coated Forstner Set
...plus other(s)
|
WOODTEK® TITANIUM COATED FORSTNER BITS RUN COOLER AND STAY SHARP LONGER THAN UNCOATED BITS. LIKE STANDARD FORSTNER BITS,WOODTEK®TITANIUM COATED FORSTNER BITS PRODUCE FLAT BOTTOMED HOLES, ANGLED HOLES, ARCS CUT INTO THE EDGES OF BOARDS OR THROUGH HOLES IN ALL MATERIALS COMMONLY USED IN WOODWORKING:
THE TITANIUM COATING ON THESE BITS ALLOW THEM TO RUN COOLER AND STAY SHARP LONGER THAN STANDARD STEEL BITS. BITS CAN BE ORDERED INDIVIDUALLY OR IN A 16 PIECE BOXED SET (101-939) WHICH INCLUDES ALL OF THE BITS BELOW. BITS ARE ABOUT 3-1/2" OVERALL LENGTH WITH 3/8" SHANKS. BITS OVER 2" DIAMETER ARE NOT RECOMMENDED FOR USE IN HAND HELD DRILLS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
915-975 - SLIPSTOP™ NON-MARRING DEPTH STOPS FOR FORSTNER BITS - CLICK HERE.
|
|
|
|
Advanced Search Tools
Browse
