|
|
|
Bits Router/rabbeting/all
|
FREUD® RABBETING ROUTER BITS
|
| 1-1/4" X 3/8" Rabbeting Router Bit
...plus other(s)
|
CARBIDE TIPPED FREUD® RABBETING ROUTER BITS HAVE A SLIGHT SHEAR ANGLE BUILT INTO THE TIP SO THEY CUT A VERY CLEAN, CRISP SHOULDER, A NICE FLAT BOTTOM AND SMOOTH SIDE - 3/8" CUT DEPTH (1/2" FOR 129-323, 129-326 AND 129-329). STEEL PILOTS CAN BE REMOVED FROM BITS AND USED WITH EDGE GUIDES FOR WIDER RABBETS:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE-MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/rabbeting/all
|
FREUD® RABBETING ROUTER BITS
|
| 1-3/8" X 1/2" Rabbeting Router Bit
...plus other(s)
|
CARBIDE TIPPED FREUD® RABBETING ROUTER BITS HAVE A SLIGHT SHEAR ANGLE BUILT INTO THE TIP SO THEY CUT A VERY CLEAN, CRISP SHOULDER, A NICE FLAT BOTTOM AND SMOOTH SIDE - 3/8" CUT DEPTH (1/2" FOR 129-323, 129-326 AND 129-329). STEEL PILOTS CAN BE REMOVED FROM BITS AND USED WITH EDGE GUIDES FOR WIDER RABBETS:
ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE-MOUNTED PORTABLE ROUTERS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/rabbeting/all
|
WOODTEK RABBETING ROUTER BIT
|
| 61321 1/4"ct Rabbeting Bit
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED RABBETING ROUTER BITS CAN BE USED FOR LETTING IN BACK PANELS AND JOINING BOARDS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/rabbeting/all
|
VERSATILE FREUD® RABBETING BITS INCLUDE INTERCHANGEABLE BEARINGS
|
| 7 Bearing Rabbet Bit Set, 1/2" Shank
...plus other(s)
|
WITH FOUR OR SEVEN INTERCHANGEABLE BEARINGS, CARBIDE TIPPED FREUD® RABBETING ROUTER BITS WILL PRODUCE SUPER SMOOTH CUTS ON BOTH SIDES OF THE RABBET - RABBET DEPTH CAN BE ALTERED BY CHANGING BEARINGS:
32-502, 32-522 - FOUR BEARING BIT SETS COME WITH 3/8", 1/2", 5/8" AND 3/4" BEARINGS (5/16", 3/8", 7/16" AND 1/2" CUT DEPTHS). 887-635, 887-642, 129-341 - SEVEN BEARING BIT SETS ALSO INCLUDE 7/8", 1-1/8" AND 1-3/8" BEARINGS (FLUSH, 1/8" AND 1/4" CUT DEPTHS). BEARINGS LUBRICATED WITH HIGH TEMPERATURE LUBRICANT AND SHIELDED TO KEEP OUT UNWANTED WOOD DUST. WRENCH AND STEP WASHERS (3/8", 1/2") INCLUDED. RED, NON-STICK PERMA-SHIELD™ ROUTER BIT COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOODS, HARDWOODS AND SOFT WOODS. USE ON TABLE MOUNTED AND HAND HELD PORTABLE ROUTERS. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/rabbeting/all
|
WOODTEK MULTI-DEPTH RABBETING ROUTER BIT
|
| 1/4" Rabbeting Bit Set
...plus other(s)
|
INTERCHANGE THE PILOT BEARINGS AND THE WOODTEK® RABBETING BIT CAN CUT SIX DIFFERENT RABBETS AND FLUSH TRIMS. AVAILABLE WITH 1/4" OR 1/2" SHANK. CUTTING HEIGHT IS 1/2":
1-3/8" DIA.; FLUSH. 1-1/8" DIA.; 1/8" DEPTH. 7/8" DIA.; 1/4" DEPTH. 3/4" DIA.; 5/16" DEPTH. 5/8" DIA.; 3/8" DEPTH. 1/2" DIA.; 7/16" DEPTH. 3/8" DIA.; 1/2" DEPTH.
INCLUDES PLASTIC CASE AND HEX WRENCH. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/rabbeting/all
|
RABBETING ROUTER BITS IN LIMITED QUANTITIES
|
| 3/8" Rabbeting Router Bit
|
CARBIDE TIPPED RABBETING ROUTER BITS CUT HARDWOOD, SOFTWOOD, PLYWOOD AND ALL COMPOSITION MATERIALS. USE WITH HAND HELD OR TABLE MOUNTED PORTABLE ROUTERS:
97-071 - 1-1/4" DIA.; 3/8"H; 1-7/8" OVERALL. PILOT BEARING ENSURES ACCURACY. 1/4" SHANKS. IMPORTED.
LIMITED TO QUANTITIES ON HAND
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
917-599 - WOODTEK® PILOT BEARING SAVER LUBRICANT.
|
|
|
|
Advanced Search Tools
Browse
will