|
|
|
Hardware Drawer Slides - Ball Bearing Flipper Door
|
SOFT CLOSING MECHANISMS PREVENT OVER-THE-TOP FLIPPER DOORS FROM SLAMMING
|
| 14" Overhead Flipper Slides
...plus other(s)
|
SUGATSUNE OV SOFT CLOSING MECHANISMS USE PATENTED LAPCON TECHNOLOGY TO PROVIDE SMOOTH AND QUIET OPERATION - DOORS WILL NOT SLAM SHUT!
STANDARD MECHANISMS WILL HANDLE 3/4" OR 25/32" THICK DOORS WEIGHING 6.6 TO 11 LBS. THAT ARE 27-9/16" TO 55-1/8" WIDE X 13-25/32" TO 17-23/32" HIGH. HEAVY DUTY MECHANISMS ACCOMMODATE SIMILAR SIZES BUT ARE ENGINEERED FOR DOORS WEIGHING 11 TO 17.6 LBS. STEEL, DIE CAST ZINC AND PLASTIC CONSTRUCTION - SOLD IN PAIRS (INSTRUCTIONS AND MOUNTING HARDWARE INCLUDED). IMPORTED.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
KV8092 4X4 POCKET DOOR™ SLIDES HANDLE LARGE OR HEAVY DOORS
|
| 18" 8092 Pocket Door Slide
...plus other(s)
|
PERFECT FOR LARGE ENTERTAINMENT AND HOME THEATER CABINETS, KNAPE & VOGT® KV8092 4X4 POCKET DOOR™ SLIDES HAVE BEEN SPECIFICALLY DESIGNED TO HOLD DOORS UP TO 75 LBS. AND UP TO 72"H X 26"W. MORE IMPORTANTLY, SLIDE INSTALLATION REQUIRES 44% LESS HARDWARE THAN COMPETING PRODUCTS:
SELF-CLOSING, THREE-WAY ADJUSTABLE ISOMETRIC DESIGN - EBONY FINISH. DUAL RACK-AND-PINION DESIGN ELIMINATES DOOR SAG. METAL BALL RETAINER HAS THREE BEARINGS PER INCH OF RACE FOR SMOOTH AND QUIET OPERATION. SLIDE TRACK INDEXING SYSTEM SPEEDS INSTALLATION. HINGE BASES PRE-MOUNTED FOR FASTER INSTALLATION. HINGE OPTIONS ALLOW STANDARD INSET APPLICATION ALONG WITH FREE SWING, PARTIAL OVERLAY, THICK DOOR AND EXTRA THICK DOOR APPLICATIONS.
EACH DOOR REQUIRES (SOLD SEPARATELY):
1 - 4X4 POCKET DOOR™ SLIDE PACK INCLUDING 2 SLIDES, 2 RACKS, DOOR ROLLER HARDWARE AND SHAFT HARDWARE. 1 - SHAFT TO BE CUT 2" SHORTER THAN DOOR HEIGHT. 2 - HINGE PACKS (ONE PAIR PER PACK).
INSTRUCTIONS DESCRIBE HOW TO DETERMINE HINGE HOLE CENTERS, POSITION SLIDE CHANNELS INSIDE CASE, PREPARE SHAFT AND GEAR ASSEMBLY, HANG DOOR AND ADJUST HINGES AND INSTALL GUIDE ROLLERS (NOT RECOMMENDED FOR RECEDING OR FLIPPER DOOR APPLICATIONS.)
8090PCR - CASSETTE ROLLER (SEE INSET) MOUNTS ONTO CABINET SIDE TO ALLOW RAISED PANEL DOORS TO CLEAR SLIDES WHEN CLOSING (REQUIRED TO SUPPORT RAISED PANEL DOORS; NOT REQUIRED WITH FLAT PANEL DOORS). MANUFACTURER'S LIMITED LIFETIME WARRANTY. USA
|
|
|
|
Hardware Drawer Slides - Ball Bearing Pocket Door
|
KV8091 4X4 POCKET DOOR™ SLIDES
|
| 12-1/8" 4x4 Pocket Door Slide Pack
...plus other(s)
|
WITH KNAPE & VOGT® KV8091 4X4 POCKET DOOR™ SLIDES YOU PROVIDE THE HINGES AND BASEPLATES TO BEST SUIT YOUR SPECIFIC APPLICATION:
DESIGNED TO HOLD DOORS UP TO 75 LBS. AND UP TO 72"H X 26"W. DUAL RACK-AND-PINION DESIGN ELIMINATES DOOR SAG. EBONY FINISH WITH THREE BEARINGS PER INCH OF RACE FOR SMOOTH AND QUIET OPERATION. NOT RECOMMENDED FOR RECEDING OR FLIPPER DOOR APPLICATIONS.
EACH DOOR REQUIRES (SOLD SEPARATELY):
ONE 4X4 POCKET DOOR™ SLIDE PACK INCLUDING 2 SLIDES, 2 RACKS, DOOR ROLLER HARDWARE AND SHAFT HARDWARE. ONE SHAFT TO BE CUT 2" SHORTER THAN DOOR HEIGHT. TWO PAIRS OF HINGES AND BASEPLATES.
8090PCR CASSETTE ROLLER IS REQUIRED TO SUPPORT RAISED PANEL DOORS; NOT REQUIRED WITH FLAT PANEL DOORS. DOOR CONCEAL IS 4" LESS THAN SLIDE LENGTH.
OPTIONAL FULL OVERLAY KIT IS DESIGNED TO PROVIDE FULL OVERLAY ON DOORS UP TO 3/4" THICK AND ATTACHES EASILY TO KV8091 SLIDES ( REQUIRES ADDITION OF A PARTITION IN THE CABINET TO SUPPORT SLIDE MECHANISM). KIT INCLUDES 2 BRACKETS, 4 OVERLAY HINGES AND BASEPLATES, 4 HINGE COVER CAPS, 4 FELT PADS AND MOUNTING HARDWARE (FOR ONE DOOR). 75 LBS. MAXIMUM DOOR WEIGHT; 24" MINIMUM DOOR HEIGHT (NOT RECOMMENDED FOR SQUARE DOORS OR WHERE DOOR WIDTH EXCEEDS DOOR HEIGHT).
|
|
|
|
Advanced Search Tools
Browse
will