|
|
|
Abrasives - Misc/flapwheel
|
SAND-O-FLEX ABRASIVE FLAP SANDER
|
| Sand-o-flex Flap Sander
...plus other(s)
|
DEVELOPED BACK IN 1945, SAND-O-FLEX IS A PROVEN, BRUSH BACKED SANDER DESIGNED FOR FINISHING A VARIETY OF COMPLEX SURFACES:
WITH ITS FIRM CUSHIONING BRISTLES, SAND-O-FLEX ABRASIVE STRIPS ARE FORCED INTO, AROUND AND OVER CORNERS, HOLLOW AND FLUTED SURFACES AND SMALL OPENINGS. PRESSURE IS DISTRIBUTED EVENLY OVER THE SURFACES TO PREVENT LOSS OF DETAIL AND THE FLATTENING OF ROUNDED AREAS; AS ABRASIVE WEARS, MORE CAN BE FED FROM THE HUB. INCLUDES 80 GRIT SLASHED ABRASIVE, BRUSHES AND 1/4" AND 3/8" DRILL ADAPTER. CHOOSE FROM TWO TYPES OF ABRASIVES - SLASHED OR PLAIN; SLASHED WORKS BEST WITH MOLDINGS AND ODD CONTOURS; USE PLAIN FOR FLAT SURFACES. ABRASIVE REFILLS AVAILABLE IN 60, 80, 120 AND 180 GRITS.
|
|
|
|
Abrasives - Misc/flapwheel
|
A&H ABRASIVESTM ABRASIVE FLAP WHEELS
|
| 2"x1"x1/4" Alox 80x Interleaf FLAP WHEEL
...plus other(s)
|
THESE FLAP SANDERS ARE NOT ORDINARY FLAP SANDERS:
EACH IS INTERLEAVED WITH A NYLON, ABRASIVE PAD TO MAKE THEM LESS AGGRESSIVE AND GIVE THEM A MUCH MORE STABLE, CONSISTENT FEEL. YOU CAN ACTUALLY TAKE A PIECE TO FINISH LEVEL WITHOUT HAND SANDING. DESIGNED FOR USE WITH A FLEXIBLE SHAFT TOOL, THESE WHEELS ALSO WORK WELL WITH HAND DRILLS. AVAILABLE IN 2" OR 3" DIAMETER AND A VARIETY OF GRITS - 1/4" SHANK. GERMANY.
|
|
|
|
Abrasives - Misc/flapwheel
|
REPLACEMENT ABRASIVE LOADINGS
|
| 5pc Alox 60x Slashed Loading For B-12
...plus other(s)
|
UPDATE YOUR SAND-RITE DB-612 SANDER WITH FACTORY ORIGINAL REPLACEMENT PARTS:
FIVE ASSEMBLIES OF THREE FLAPS, EACH, MAKE UP A TOTAL OF 15 FLAPS PER LOAD - FLAPS ARE 12" LONG. HEAVY DUTY 1/4" STAGGERED, SLASHED CLOTH SANDPAPER LOADING. AVAILABLE IN SEVEN GRITS RANGING FROM 60 TO 220. 822-282, 822-289 - 6" X 7" CANVAS, 6" X 7" TUBES AND VALVE ASSEMBLIES PROVIDE OEM CONVENIENCE. 822-920 - SET OF 15 REPLACEMENT BRUSHES. 822-289, 822-297 - LIMITED TO QUANTITIES ON HAND."
|
|
|
|
Abrasives - Misc/flapwheel
|
REPLACEMENT ABRASIVE LOADINGS
|
| 5pc Alox 120x Slashed Loading For B-12
...plus other(s)
|
UPDATE YOUR SAND-RITE DB-612 SANDER WITH FACTORY ORIGINAL REPLACEMENT PARTS:
FIVE ASSEMBLIES OF THREE FLAPS, EACH, MAKE UP A TOTAL OF 15 FLAPS PER LOAD - FLAPS ARE 12" LONG. HEAVY DUTY 1/4" STAGGERED, SLASHED CLOTH SANDPAPER LOADING. AVAILABLE IN SEVEN GRITS RANGING FROM 60 TO 220. 822-282, 822-289 - 6" X 7" CANVAS, 6" X 7" TUBES AND VALVE ASSEMBLIES PROVIDE OEM CONVENIENCE. 822-920 - SET OF 15 REPLACEMENT BRUSHES. 822-289, 822-297 - LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Abrasives - Misc/flapwheel
|
4" FLAP SANDER"
|
| 4"x1"x1/4" Alox 80 Grit Sanding Wheel
...plus other(s)
|
RESIN BOND, CLOTH BACKED ALUMINUM OXIDE REMOVES STOCK FAST, YET DOESN'T LEAVE DEEP SCRATCH MARKS. 4" FLAP SANDER ALSO WORKS WELL ON FLAT AREAS AND IS FINE FOR WET SANDING, TOO. TRY IT ON CARVINGS OR MOLDINGS:
FOUR GRITS TO SELECT FROM; 4" DIA. DISCS ARE ABOUT 1" THICK; SLASHED ABRASIVE MOLDS TO DIFFERENT SHAPES. DUE TO HEAVY BACKING, IT'S A GOOD IDEA TO BREAK IN SANDER EDGES ON SOMETHING FIRM BEFORE STARTING A CONTOURED PIECE. THIS ENSURES THAT EDGES FLUFF UP AND THE ABRASIVE STRIPS BECOME PROPERLY ORIENTED. 3,200 RPM MAXIMUM SPEED; 1/4" SHANK. USA."
|
|
|
|
Abrasives - Misc/flapwheel
|
4" FLAP SANDER
|
| 4"x1"x1/4" Alox 120 Grit Sanding Wheel
...plus other(s)
|
RESIN BOND, CLOTH BACKED ALUMINUM OXIDE REMOVES STOCK FAST, YET DOESN'T LEAVE DEEP SCRATCH MARKS. 4" FLAP SANDER ALSO WORKS WELL ON FLAT AREAS AND IS FINE FOR WET SANDING, TOO. TRY IT ON CARVINGS OR MOLDINGS:
FOUR GRITS TO SELECT FROM; 4" DIA. DISCS ARE ABOUT 1" THICK; SLASHED ABRASIVE MOLDS TO DIFFERENT SHAPES. DUE TO HEAVY BACKING, IT'S A GOOD IDEA TO BREAK IN SANDER EDGES ON SOMETHING FIRM BEFORE STARTING A CONTOURED PIECE. THIS ENSURES THAT EDGES FLUFF UP AND THE ABRASIVE STRIPS BECOME PROPERLY ORIENTED. 3,200 RPM MAXIMUM SPEED; 1/4" SHANK. USA.
|
|
|
|
Machinery Accessories - Not Listed Elsewhere
|
ECONOMICAL 8-1/2" DIAMETER ABRASIVE BRUSH SANDING HEAD WITH REFILLS
|
| 8-1/2"diax4"widex1"bore Flapsander
...plus other(s)
|
|
WOODTEK FLAP SANDING BRUSH HEAD IS 4" WIDE X 8-1/2" DIAMETER WITH A 1" HOLE. THIS HEAD IS LARGE ENOUGH TO SAVE YOU TIME AND MONEY SANDING CONTOURS SUCH AS TABLE LEGS AND OTHER IRREGULAR SHAPES. AS THE SANDPAPER WEARS YOU CAN EXTEND THE FLAPS AS NEEDED. THE HEAD COMES WITH A 120 GRIT SANDPAPER LOADING WITH 60-220 GRITS REPLACEMENT LOADINGS AVAILABLE. THE REPLACEMENT LOADINGS ARE PREMIUM ALUMINUM OXIDE ABRASIVE WITH A FLEXIBLE J" WEIGHT BACKING AND MADE IN SWEDEN. THERE ARE 12 BRUSHES AND FLAPS ON THE WHEEL. REPLACEMENT BRUSHES ARE AVAILABLE. SANDING HEAD IS IMPORTED.
|
|
|
|
Machinery - Sanders
|
WOODTEK FLAP SANDER AND PNEUMATIC DRUM SANDING MACHINE
|
| Drum And Brush Sanding Machine
...plus other(s)
|
THE WOODTEK® FLAP SANDING HEAD/PNEUMATIC DRUM SANDER (120-029) (SHOWN WITH OPTIONAL STAND) FEATURES A 4" WIDE X 8-1/2" DIA. FLAP SANDING HEAD WITH 12 BRUSHES (100 GRIT, J WEIGHT BRUSHES INCLUDED) - IDEAL FOR SANDING CONTOURS WITHOUT CHANGING THEIR SHAPES.
120-032 - BUFFING HEAD/PNEUMATIC DRUM SANDER (NOT SHOWN) HAS A 1" WIDE X 8" DIA. WHEEL FOR BUFFING AND FINE POLISHING. EACH COMES WITH 4" DIA. X 6" WIDE PNEUMATIC SANDING DRUM. WHEN SLIGHTLY INFLATED, DRUM CONFORMS TO CONTOURS - FULLY INFLATED, IT PROVIDES STRAIGHT, FLAT SANDED SURFACES (120 GRIT DRUM SLEEVES INCLUDED). ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED. 120-035 - OPTIONAL STAND FITS EITHER SANDER.
SPECIFICATIONS:
MOTOR - 1HP, 115/230V, 1PH, 12A, 1,720 RPM (8'L POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. FLAP SANDING HEAD SHAFT - 1" DIA. X 8-1/2". BUFFING HEAD SHAFT - 3/4" DIA. X 6-1/2". OVERALL DIMENSIONS - 9"H X 17-1/4"W X 12-1/4"D. NET WEIGHT - 60 LBS. SHIPPING WEIGHT - 92 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Advanced Search Tools
Browse
will