|
|
|
Adhesives - Accessories
|
YOU CAN USE BLACKLITE™ GLUE ADDITIVE TO FIND "INVISIBLE" GLUE SPOTS
|
| Blacklite Glue Additive-pk-2
...plus other(s)
|
MIX ONE OUNCE OF BLACKLITE™ GLUE ADDITIVE INTO ONE GALLON OF GLUE, AND YOU'LL NEVER MISS A SPECK OF GLUE AGAIN:
UNDER NORMAL LIGHT, GLUE WILL APPEAR TRANSPARENT - UNDER BLACK LIGHT (NOT INCLUDED), THE ADDITIVE IN THE GLUE WILL SHINE BRIGHTLY. NO MORE SCRUTINIZING EVERY NOOK AND CRANNY OF YOUR WOODWORKING PROJECTS BEFORE STAINING. SOLD IN PACKAGES OF TWO OR SIX, ONE OZ. BOTTLES - USE WITH ALIPHATIC GLUES ONLY. USA.
|
|
|
|
Adhesives - Epoxy
|
QUICKCURE® 5 MINUTE EPOXY ADHESIVE
|
| Quick-cure 1/2 Pint
...plus other(s)
|
BOND WOOD, FILL SCREW HOLES, LOCK THREADS, GLUE COUNTERTOPS AND BULKHEADS WITH SYSTEM THREE® QUICKCURE® 5 MINUTE EPOXY ADHESIVE:
TWO COMPONENT, SOLVENT FREE EPOXY/POLYMERCAPTAN ARE MIXED IN 1-TO-1 VOLUME RATIO - SET TACK FREE IN FIVE MINUTES. CURES IN ONE HOUR TO STRONG, CLEAR AND RESILIENT BOND. 2-3 MINUTE WORKING TIME AT 77°F. AVAILABLE IN 8 OUNCE (4 OZ., EACH, RESIN AND HARDENER) OR 16 OUNCE (8 OZ., EACH, RESIN AND HARDENER) KITS. USA.
|
|
|
|
Adhesives - Epoxy
|
STRUCTURAL EPOXY ADHESIVE IS GAP FILLING AND WATERPROOF
|
| T-88 Epoxy 1/2pt
...plus other(s)
|
SYSTEM THREE® T-88® STRUCTURAL EPOXY ADHESIVE IS DESIGNED TO PROVIDE SUPERIOR RESULTS UNDER ADVERSE CONDITIONS:
TWO-PART EPOXY IS GAP FILLING AND WATERPROOF WHEN CURED - FORMS TOUGH NON-BRITTLE BOND ON MOST CLEAN SURFACES. 40-60 MINUTE WORKING TIME @ 70°F. IN MIXING CONTAINER - 30-40 MINUTE WORKING TIME IF POURED OUT OF CONTAINER. SETS TACK FREE IN 6-9 HOURS - CURES IN 24. 7,000 PSI TENSILE STRENGTH, 11,500 PSI FLEXURAL. 8 OUNCE (4 OZ., EACH, RESIN AND HARDENER) OR 16 OUNCE (4 OZ., EACH, RESIN AND HARDENER) KITS. USA.
|
|
|
|
Adhesives - Epoxy
|
SYSTEM THREE® EPOXY ADHESIVE SYSTEM MEETS OVER 90% OF EPOXY REQUIREMENTS
|
| Epoxy Resin Quart
...plus other(s)
|
WHETHER YOU'RE BUILDING, RESTORING OR REPAIRING WITH WOOD, FIBERGLASS OR COMPOSITES, YOU CAN EASILY MODIFY THE VERSATILE SYSTEM THREE® EPOXY ADHESIVE SYSTEM TO SUIT ALMOST ANY APPLICATION:
PERMANENTLY BOND OLD AND NEW JOINTS. LAMINATE BEAMS OR OTHER OBJECTS. SEAL INTERIOR AND EXTERIOR SURFACES. SUITABLE FOR DAMP LOCATIONS. SYSTEM BASED UPON LOW VISCOSITY, MODIFIED EPOXY RESIN MIXED AT A 2:1 VOLUME RATIO WITH ONE OF THREE HARDENERS:
#1 - 15 MINUTE WORKING TIME, CURES DOWN TO 35 DEGREES F.;#2 - WORKS ABOVE 55 DEGREES F., 30 MINUTE WORKING TIME; AND#3 - USED ABOVE 75 DEGREES F., 70 MINUTE WORKING TIME.
WHEN PROPERLY MIXED, EPOXY IS READY "AS IS" FOR COATING, FIBERGLASSING OR GLUING. FOR GLUING REQUIRING GAP FILLING OR FLOW CONTROL, AND ALL FILLETING WORK, THICKENERS ARE REQUIRED. 3105S16 SILICA THICKENER INCREASES VISCOSITY AND PRODUCES A NON-SAGGING FIRM PASTE. 3110S16 WOOD FLOUR IS FINE SAWDUST; EXCELLENT FOR CREATING GLUES AND STRUCTURAL FILLETS. OPTIONAL MEASURING AND MIXING TOOLS SPEED EPOXY PREPARATION AND APPLICATION. USA.
|
|
|
|
Adhesives - Epoxy
|
GOOF PROOF DISPENSING GUN MIXES AND DISPENSES TWO PART EPOXY ADHESIVES
|
| Quick Cure Syringe 50 Ml.
...plus other(s)
|
FROM SYSTEM THREE®, THE GOOF PROOF EPOXY DISPENSING GUN, IS CONVENIENT AND COMFORTABLE TO USE. NO MESS AND NO MEASURING:
POSITIVE DISPLACEMENT GUN EQUALLY MIXES TWO PART EPOXY ADHESIVES WHILE DISPENSING. USES SYSTEM THREE® QUICK CURE OR T-88 50ML SYRINGES WITH MIXING TIPS. SYRINGES COME WITH PLUNGER FOR MANUAL USE. RE-SEALABLE CAPS HELP MAINTAIN EPOXY QUALITY.
|
|
|
|
Adhesives - Epoxy
|
SUPER STRONG MAS MARINE GRADE EPOXY AT CLEARANCE PRICES
|
| Fast Cure Mini Kit
...plus other(s)
|
"MARINE GRADE" MEANS THE TOUGHEST PRODUCT FOR THE MOST EXTREME ABUSE - WOODEN BOATS IN SALT WATER FACING HEAT, COLD AND PRESSURE. YOU CAN IMAGINE HOW WELL YOUR FURNITURE OR OTHER WOOD PROJECTS WILL HOLD UP WITH MAS EPOXIES MARINE GRADE PRODUCTS:
PERMANENTLY BOND NEW AND OLD JOINTS. REPAIR AND FILL ROTTED ARCHITECTURAL STRUCTURES. SNOWBOARD AND BEAM LAMINATIONS. FIBERGLASS COATING OF STRIP CANOES.
30-019 - FAST CURE MINI KIT INCLUDES 16 OZ. MAS LOW VISCOSITY RESIN, 8 OZ. MAS FAST HARDENER, 4 GRADUATED MIXING CONTAINERS, 10 MIXING STICKS AND 4 PAIR LATEX GLOVES. 30-020 - SLOW CURE MINI KIT INCLUDES 16 OZ. MAS LOW VISCOSITY RESIN, 8 OZ. MAS SLOW HARDENER, 4 GRADUATED MIXING CONTAINERS, 10 MIXING STICKS AND 4 PAIR LATEX GLOVES. MIX 2 PARTS RESIN TO 1 PART HARDENER.
CREATE YOUR OWN POT LIFE:
30-006, 30-007 - SLOW HARDENER: 34-1/2 MINUTES @ 68°F. 30-516, 30-532 - MEDIUM HARDENER: 19-1/2 MINUTES @ 68°F. 30-011 - FAST HARDENER: 10-1/2 MINUTES @ 68°F. SOLVENT-FREE MAS EPOXIES ARE CURRENTLY ONE OF THE SAFEST ON THE MARKET AND MEET CLEAN AIR ACT VOC STANDARDS. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Epoxy
|
"WELD" WOOD WITH MAS RAPID CURE EPOXY
|
| Rapid Cure Kit
|
CONTENTS OF THE MAS RAPID CURE EPOXY KIT MIX IN A 1-TO-1 RATIO FOR THE STRONGEST POSSIBLE BOND:
COMPLETELY WATERPROOF AND ODORLESS WITH A 5,700 PSI TENSILE STRENGTH. 1-5 MINUTE SET-UP TIME - SAND IN 1-2 HOURS; FULL CURE IN 4-6 HOURS. 30-100 MINI KIT INCLUDES 4 OZ. MAS RAPID CURE RESIN, 4 OZ. RAPID CURE HARDENER, 4 GRADUATED MIXING CONTAINERS, 10 MIXING STICKS AND 4 PAIR LATEX GLOVES. 30-101 PINT KIT HAS SIMILAR CONTENTS BUT INCLUDES 8 OZ. CONTAINERS OF RESIN AND HARDENER. SOLVENT-FREE MAS EPOXIES ARE CURRENTLY ONE OF THE SAFEST ON THE MARKET AND MEET CLEAN AIR ACT VOC STANDARDS. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Epoxy
|
SUPER EPOXY AND DISPENSING GUN MAKES APPLICATION CLEAN AND EASY
|
| Epoxy Static Cartridge
...plus other(s)
|
|
NO MIXING, NO GUESSING. DROP THE EPOXY CARTRIDGES IN THE GUN, PULL THE TRIGGER AND THE EPOXY IS MIXED AND APPLIED. WELL THOUGHT OUT GUN USES DISPOSABLE MIXING NOZZLES SO YOU CAN USE THE GUN AGAIN AND AGAIN. SUPER EPOXY BONDS WOOD, METAL, GLASS, FIBERGLASS CONCRETE JUST ABOUT ANYTHING. REACHES WORKING BOND STRENGTH IN 3-4 HOURS WITH A 15-20 MINUTE OPEN TIME FOR REPOSITIONING THE PIECES.
|
|
|
|
Adhesives - Epoxy
|
SUPER EPOXY® PERMANENTLY BONDS JUST ABOUT ANYTHING
|
| 1 Oz Super Epoxy Syringe
|
YOU CAN USE TRANSLUCENT SUPER EPOXY® 016619 FOR BONDING, SEALING AND AS A FILLER FOR MOST MATERIALS INCLUDING FIBERGLASS, WOOD, CONCRETE, METAL, BRICK, GLASS, BLOCK, CERAMIC, HARD PLASTIC (NOT FOR USE WITH SOFT PLASTIC) AND MORE:
CONVENIENT DUAL SYRINGE DELIVERS EQUAL AMOUNTS OF CATALYST AND EPOXY. 15 MINUTE OPEN TIME; REACHES WORKING HARDNESS IN 3-4 HOURS; TOTALLY CURES IN 3-7 DAYS. RESISTANT TO MOST CHEMICALS, SALT WATER AND PETROLEUM PRODUCTS. USA.
|
|
|
|
Adhesives - Instant
|
MITREBOND RAPID ADHESIVE SYSTEM EVEN BONDS MDF IN SECONDS
|
| Miterbond Adhesive Pack
|
|
DESIGNED FOR MDF CORNICES AND OTHER LIGHT TIMBER AND PLASTIC COMPONENTS, MITREBOND NEEDS ONLY A FEW DROPS TO HOLD SECURELY. ALSO WORKS WELL WITH CERAMICS, ALUMINUM, PORCELAIN, GLASS, CHIPBOARD, PERSPEX AND SOME PLASTICS. ONE KIT BONDS ABOUT 100 JOINTS. INCLUDES 50G ADHESIVE AND 200ML AEROSOL.
|
|
|
|
Adhesives - Instant
|
INNOVATIVE 2P-10 ADHESIVE SYSTEM BONDS WOOD IN 10 SECONDS, CURES IN 30 SECONDS
|
| 2p10 Kit
...plus other(s)
|
USING THE TWO PART FASTCAP™ 2P-10 ADHESIVE SYSTEM KIT, YOU CAN QUICKLY AND EASILY GLUE THE MOST DIFFICULT CABINETRY OR OTHER WOODWORKING JOINTS WITHOUT CLAMPING:
JUST APPLY THE GLUE, SPRAY ON THE ACTIVATOR AND STICK TOGETHER FOR A STRONG PERMANENT 4,000 PSI BOND. 2P-10 KIT INCLUDES JëL, THICK AND MEDIUM ADHESIVES FOR BONDING DIFFERENT SURFACES (2 OZ., EACH), ONE 2 OZ. CONTAINER OF ACTIVATOR FOR FASTER BONDS AND ONE 2 OZ. BOTTLE OF DEBONDER FOR REMOVING GLUE RESIDUE. KIT ALSO COMES WITH PUMP SPRAYERS, HARD SHELL CARRYING CASE, MIRCO-TIPS AND INSTRUCTIONS. PRODUCT REFILLS AVAILABLE. ACTIVATOR AVAILABLE IN CONVENIENT 12 OZ. AEROSOL CANS. MICRO-TIPS ARE USED TO LAY DOWN MICRO FINE BEADS OF GLUE - GREAT FOR FILLING CRACKS.
|
|
|
|
Adhesives - Instant
|
J. E. MOSER'S® LIGHTNING BOND™ HIGH PERFORMANCE INSTANT GLUES
|
| Debonder
...plus other(s)
|
FILL HAIRLINE CRACKS OR LARGE GAPS WITH J. E. MOSER'S® LIGHTNING BOND™ HIGH PERFORMANCE CYANOACRYLATE INSTANT GLUES - A VARIETY OF VISCOSITIES, FROM THIN TO SUPER THICK, MEANS YOU CAN MEET VIRTUALLY ANY GLUING NEED:
ADD LIGHTNING ACTIVATOR TO GREATLY REDUCE TACK-UP TIME. AVAILABLE SEPARATELY OR INSIDE THE LIGHTNING BOND™ GLUE KIT ALONG WITH EVERYTHING ELSE YOU NEED TO GET STARTED. KIT INCLUDES 1 OZ., EACH, THIN, MEDIUM AND THICK VISCOSITY GLUE, 2 OZ. ACTIVATOR, 2 OZ. DEBONDER, 3/4 OZ. SQUEEZ-DROP PRECISION APPLICATOR BOTTLE WITH LOCKING CAP, 3 FLEXIBLE AND 5 TAPERED TIPS PLUS PLASTIC STORAGE CASE. CYANOACRYLATES CURE FULLY IN 24 HOURS. THIN VISCOSITY LIGHTNING BOND™ IS PERFECT FOR HAIRLINE CRACKS - TACKS UP IN 1-3 SECONDS. 2 OZ. MEDIUM VISCOSITY LIGHTNING BOND™ FILLS MOST SMALL GAPS - 5-15 SECOND TACK-UP TIME. 2 OZ. THICK VISCOSITY LIGHTNING BOND™ IS EXTRA THICK FOR LARGE GAPS - TACKS UP IN 10-25 SECONDS. 2 OZ. SUPER THICK GEL LIGHTNING BOND™ IS BEST FOR GAPS UP TO 0.01" - TACKS UP IN 45 SECONDS. 0.07 OZ. (20G). DEBONDER SOFTENS CURED GLUES AND REMOVES GLUE FROM HANDS AND TOOLS. 2 OZ. USA.
|
|
|
|
Adhesives - Solvent Based
|
TITEBOND® LOW SOLVENT NEOPRENE BASED CONTACT CEMENT
|
| Titebond Contact Cement
...plus other(s)
|
ENVIRONMENTALLY SUPERIOR TITEBOND® NEOPRENE-BASED CONTACT CEMENT HAS NO OZONE-DEPLETING CHEMICALS AND IS THE IDEAL CHOICE IN RESPONDING TO LOCAL FIRE CODES, INSURANCE REQUIREMENTS OR GENERAL FIRE OR EXPLOSION RISKS:
APPLY, LET DRY 30-45 MINUTES AND BOND. BONDED ASSEMBLIES CAN BE MACHINED IMMEDIATELY. CLEANS UP WITH WATER. AVAILABLE IN QUART AND GALLON CANS. USA
|
|
|
|
Adhesives - Solvent Based
|
GLUE ROLLER COVERS AND FRAMES SPEED LAMINATE INSTALLATION WORK
|
| 3" Glue Roller Cover
...plus other(s)
|
APPLY CONTACT AND OTHER ADHESIVES OVER LARGE AREAS, QUICKLY, USING SOLVENT AND WATER RESISTANT GLUE ROLLER COVERS AND FRAMES:
TEXTURED, TIGHT WOVEN FRIEZE COVER HAS TOUGH PEBBLE LIKE SURFACE; KEEPS ROLLER TURNING, NOT SLIDING. ROLLER FRAMES ARE PROFESSIONAL QUALITY, SUITABLE FOR USE WITH ANY COVER. WIRE CAGE STRUCTURE HOLDS COVER IN PLACE BY SPRING PRESSURE; SLIDE OFF THE OLD, SLIDE ON THE NEW. CORES AND COVER MATERIALS RESISTANT TO CLEAN UP SOLVENTS. SELECT FROM THREE SIZES.
|
|
|
|
Adhesives - Specialty
|
3M™ SUPER 77 MULTIPURPOSE ADHESIVE RESISTS BLEEDING, STAINING OR WRINKLING
|
| 3m Super 77 Spray Adhesive
|
3M™ SUPER 77 MULTIPURPOSE ADHESIVE EASILY SPRAYS ON TO SECURELY BOND LIGHTWEIGHT MATERIALS AND CAN BE USED FOR A VARIETY OF JOBS:
USE FOR PERMANENTLY ATTACHING FOIL, CARPETING, LIGHTWEIGHT PAPER, CARDBOARD, FELT OR CLOTH TO PAINTED OR UNPAINTED METALS, WOOD OR HARDBOARD. HIGH COVERAGE, LOW SOAK-IN AND FAST, AGGRESSIVE TACK MAKE IT A VERY VERSATILE ADHESIVE. LOW VOCS. DOES NOT CONTAIN OZONE DEPLETING CFCS. 16-3/4 OZ. AEROSOL CAN. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Adhesives - Specialty
|
TEMPORARY PATTERN MOUNTING ADHESIVES
|
| Repositionable 75 Spray Adhesive
...plus other(s)
|
3M™ REPOSITIONABLE 75 SPRAY ADHESIVE AND H. BEHLEN® MASTER™ SPRAY ADHESIVE ADHERE IN SECONDS, YET HAVE EXTRA LONG TACK RANGES THAT ALLOW YOU TO LIFT AND REPOSITION MATERIALS:
EXCELLENT FOR PRODUCTION LINE WORK WHERE PARTS ARE HELD IN PLACE TEMPORARILY PRIOR TO FINAL ASSEMBLY. BOND PAPER, CARDBOARD, ACETATE, FOIL, FABRICS, SHEETING, ETC. WILL NOT BLEED THROUGH, STAIN OR WRINKLE MOST MATERIALS. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CAN-GUN® - 926-775.
|
|
|
|
Adhesives - Specialty
|
TWO GLUE GUNS TO SUIT NEARLY ANY NEED IN ANY SHOP
|
| The Leader Glue Gun
...plus other(s)
|
THE HIGH-VOLUME, AD-TECH™ HT LEADER INDUSTRIAL GLUE GUN CAN DELIVER UP TO 4.2 LBS. OF ADHESIVE PER HOUR USING A UNIQUE GRID MELT CHAMBER:
KEEPS UP WITH ALMOST ANY HIGH VOLUME APPLICATION AT A DELIVERY RATE THAT REDUCES HAND FATIGUE - NO HEAT LOSS SLOWDOWNS OR INCREASED FEEDING FORCE. PRESET ELECTRONIC TEMPERATURE CONTROL HOLDS AT 410°F. 120V, 125 WATTS - UL LISTED. LIGHT DUTY MODEL G760 HOT MELT GLUE GUN OPERATES AT 380°F.: METAL STORAGE STAND. 120V, 40W, UL LISTED. USE 1/2" DIA. GLUE STICKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
HOT MELT GLUE STICKS - 895-024.
|
|
|
|
Adhesives - Specialty
|
HIPURFORMER™ POLYURETHANE ADVANCED BONDING SYSTEM GLUES ALMOST ANYTHING
|
| Ww30 Poly Hot Melt
...plus other(s)
|
THE TITEBOND® HIPURFORMER™ POLYURETHANE ADVANCED BONDING SYSTEM PROVIDES PERMANENT, HIGH STRENGTH, WATERPROOF BONDS THAT VIRTUALLY ELIMINATE THE NEED FOR MECHANICAL FASTENERS. EACH KIT CONTAINS:
A CORDLESS HOT MELT GLUE GUN WITH UP TO 20 MINUTES OFF THE CHARGER USE AND THREE POLYURETHANE HOT MELT ADHESIVE CARTRIDGES: - WW30 - QUICK REPAIRS AND SETUPS (30 SECOND SET TIME)
- WW60 - GAP FILLING (60 SECOND SET TIME).
- MP75 - MULTI-PURPOSE BONDING OF WOOD, MELAMINE, CERAMICS, METAL, MOST PLASTICS, MARBLE, GLASS, FRP, BRICK AND MORE (75 SECOND SET TIME).
ADHESIVE APPLICATOR, CHARGER/STAND, DETACHABLE POWER CORD, WEATHER RESISTANT CASE AND INSTRUCTIONS ALSO INCLUDED.
WITH CAPABILITIES SIMILAR TO MP75, BUT A LONGER SET TIME (5 MINUTES), MP300 MULTI-PURPOSE ADHESIVE HAS BEEN SPECIFICALLY FORMULATED FOR ASSEMBLY WORK (NOT INCLUDED IN KIT). EACH 50G HOT MELT ADHESIVE CARTRIDGE CAN PRODUCE A 1/16" X 71' LINE OF GLUE.
|
|
|
|
Adhesives - Specialty
|
FLEXIBLE SHEET VENEER ADHESIVE OFFERS NUMEROUS ADVANTAGES OVER CONTACT CEMENT
|
| Fsv Adhesive-16oz.
...plus other(s)
|
FORMULATED FOR USE WITH A WIDE RANGE OF SHEET GOODS, FLEXIBLE SHEET VENEER (FSV) ADHESIVE PRODUCES A RIGID GLUE LINE THAT RESISTS MOVEMENT WHEN CURED - ESPECIALLY RECOMMENDED FOR BACKED VENEERS AND LAMINATES:
HIGHLY SOLVENT, WATER AND HEAT RESISTANT. CAN BE APPLIED WITH FOAM BRUSH, ROLLER OR SPRAY SYSTEM. MOST APPLICATIONS ONLY REQUIRE APPLYING FSV TO SUBSTRATE - VENEER CAN BE REPOSITIONED OR REMOVED FOR UP TO 10 MINUTES. ONE-HOUR SET TIME, 24 HOUR CURE TIME. WATER-BASED, NON-FLAMMABLE AND NO ANNOYING ODOR. WARM WATER AND SOAP CLEANUP BEFORE SET TIME.
NOTE: TO ENSURE PROPER PERFORMANCE, DO NOT ALLOW WATER-BASED FLEXIBLE SHEET VENEER (FSV) ADHESIVE TO FREEZE.
DUE TO CONDITIONS BEYOND OUR CONTROL, EXPOSURE TO FREEZING TEMPERATURES CAN OCCUR DURING SHIPPING:
BETWEEN OCTOBER 31 AND APRIL 1, IF YOUR ORDER INCLUDES FLEXIBLE SHEET VENEER (FSV) ADHESIVE, TELEPHONE US TOLL-FREE, AT 1-800-645-9292. WE WILL PROCESS YOUR ENTIRE ORDER BUT DELAY SHIPPING THIS WATER-BASED ITEM UNTIL APRIL 1 OR LATER - AT NO ADDITIONAL CHARGE. TO RECEIVE YOUR ORDER, INCLUDING FLEXIBLE SHEET VENEER (FSV) ADHESIVE, WITHOUT DELAY, IT IS NOT NECESSARY TO CALL - SIMPLY PLACE THE ENTIRE ORDER USING OUR WOODWORKER.COM WEB SITE. AS ALWAYS, WE RECOMMEND TESTING A PRODUCT ON SCRAP MATERIAL BEFORE APPLYING IT TO YOUR PROJECT.
|
|
|
|
Adhesives - Specialty
|
TAKE HEAVY DUTY BUTANE POWERED GLUE GUN TO JUST ABOUT ANY JOB, JUST ABOUT ANYWHERE
|
| Butane Glue Gun
|
THE ADTECH CB800 BUTANE-POWERED GLUE GUN LETS YOU GLUE ANYWHERE, ANYTIME:
PIEZO IGNITION SYSTEM USES PRESSURIZED BUTANE LIGHTER GAS (NOT INCLUDED) TO REACH 385°F. OPERATING TEMPERATURE IN LESS THAN 5 MINUTES. VALVED, INSULATED BRASS NOZZLE. HINGED, FOLD AWAY STAND AND ERGONOMIC DESIGN FOR COMFORTABLE USE. 7-1/4"L X 7-1/2"H X 1-3/4"W; WEIGHS 10.3 OZ. USES STANDARD 1/2" DIA. GLUE STICKS. IRELAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
HOT MELT GLUE STICKS - 895-024.
|
|
|
|
Please Wait......Searching....
to see Sub Categories)
