|
|
|
Hardware Drawer Slides - Accessories
|
BLUM® CABINET PROFILE DRILLING TEMPLATE ACCURATELY LOCATES HARDWARE WITHOUT AN EXPENSIVE BORING MACHINE
|
| Cabinet Profile Drilling Jig
|
|
THE 1 METER LONG RAIL OF THE BLUM® CABINET PROFILE DRILLING TEMPLATE CLAMPS DIRECTLY TO THE CABINET SIDE. FOUR TEMPLATES CAN BE ADJUSTED ALONG THE LENGTH OF THE RAIL TO ACCURATELY LOCATE HOLES FOR TANDEM™ DRAWER SLIDES, AVENTOS™ LIFT SYSTEMS LOCATING PINS AND HINGE MOUNTING BASEPLATES. GUIDE CAN BE MOVED FROM LEFT TO RIGHT SIDE OF CABINET WITHOUT CHANGING SETUPS TO ASSURE UNIFORMITY IN BORING.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
150 LBS. LOAD RATING AND QUICK DISCONNECT RAILS MAKE THESE SLIDES IDEAL FOR LATERAL FILE DRAWERS
|
| 12" Lateral File O/travel Slide
...plus other(s)
|
DESIGNED FOR LATERAL FILE APPLICATIONS, 150 LBS. RATED SLIDES FEATURE QUICK DISCONNECT RAILS THAT SIMPLIFY DRAWER INSTALLATION:
FULLY COMPATIBLE WITH THE 32MM SYSTEM. 1-1/2" OVERTRAVEL ALLOWS FULL ACCESS TO DRAWERS EVEN UNDER COUNTERTOPS OR DESKTOP OVERHANGS. ALLOW 1/2"+1/32" CLEARANCE PER SIDE (MOUNTING SCREWS NOT INCLUDED). IMPORTED.
|
|
|
|
Hardware Drawer Slides - Ball Bearing Box Drawer
|
150 LB. LOAD RATING AND QUICK DISCONNECT RAILS MAKE THESE SLIDES IDEAL FOR LATERAL FILE DRAWERS
|
| 12" Lateral File O/travel Slide
...plus other(s)
|
THE HIGH LOAD RATING AND QUALITY FEATURES MAKE DYNASLIDE® 150 LB. FILE DRAWER SLIDES AN IDEAL CHOICE FOR HIGH END COMMERCIAL APPLICATIONS:
QUICK DISCONNECT RAILS SIMPLIFY DRAWER INSTALLATION.. HOLD IN DETENTS PREVENT CLOSED DRAWERS FROM SLIDING OUT. NON-HANDED DRAWER RAILS AND LIFT OFF DISCONNECT SIMPLIFY INSTALLATION. ALLOW 1/2" ±1/32" PER SIDE CLEARANCE. MOUNTING SCREWS NOT INCLUDED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#8 X 1/2 SCREWS - 931-338. #8 X 7/16 SCREWS - 946-217.
|
|
|
|
Hardware Storage - Specialty Storage
|
THESE FILE RAILS WILL CARRY THE LOAD
|
| Galvanized Steel File Rail-40"
...plus other(s)
|
|
DESIGNED FOR USE IN COMMERCIAL FILE DRAWER APPLICATIONS, THESE FILE RAILS WILL SUPPORT THE LOADS OF LATERAL FILE UP TO 40" WIDE. THE UNIQUE ROLLED PROFILE OF THE GALVANIZED STEEL RAILS ADDS RIGIDITY AND STRENGTH. SECTIONS ARE 40" LONG, BUT CAN BE CUT TO LENGTH WITH A HACKSAW FOR SHORTER APPLICATIONS. (CUT RAILS 1/8" SHORTER THAN THE DRAWER LENGTH FOR PROPER INSTALLATION) RAILS ARE 1-1/2" WIDE WITH A TOTAL THICKNESS OF 1/2" INCLUDING THE ROLLED PROFILE. SUPPORT CLIPS FASTEN TO DRAWER FRONTS AND BACKS WITH WOOD SCREWS TO SECURELY HOLD THE FILE RAILS IN PLACE. SUPPORT CLIPS MEASURE 1-15/16" HIGH X 1" WIDE WITH A PROTRUSION OF 3/8". FILE RAILS ARE SOLD EACH; SUPPORT CLIPS ARE SOLD IN SETS OF FOUR WITH MOUNTING SCREWS INCLUDED. INSTALLATION INSTRUCTIONS ARE INCLUDED. USA.
|
|
|
|
Hardware Storage - Specialty Storage
|
AN EASY WAY TO ORGANIZE COMPACT AND FLOPPY DISKS
|
| 13-5/8" Hanging File Rail
...plus other(s)
|
FOR OFFICE DESKS, COMPUTER STATIONS, FILE CABINETS, ETC., THESE ORGANIZERS HOLD UP TO 24 CDS OR 56 FLOPPY DISKS:
897-807 - MEDIA STORAGE BIN IS 11-7/8" LONG X 5-3/8" WIDE X 6" DEEP. 897-800 - HANGING FILE RAIL FITS OVER 1/2" DRAWER SIDES TO REPLACE METAL RAILS; 13-5/8" LONG AND CAN BE CUT TO FIT. BOTH ARE BLACK, INJECTION MOLDED PLASTIC. USA.
|
|
|
|
Hardware Storage - Specialty Storage
|
PLASTIC SLIP-ON HANGING FILE RAIL
|
| Plastic Slip-on File Rail-2-48"
...plus other(s)
|
DURABLE PLASTIC FILE RAIL FITS OVER 1/2" THICK DRAWER SIDES TO PROVIDE SUPPORT FOR HANGING FILE FOLDERS - TWO PIECES, 4' LONG:
BLACK PLASTIC RAIL CLIPS ALLOW EASY CONVERSION TO TRANSVERSE FILES. ALUMINUM FILE RAIL CUTS EASILY TO FIT YOUR NEEDS (TWO, 1/8" X 1/2" X 4' SECTIONS).
|
|
|
|
Hardware Storage - Specialty Storage
|
ALUMINUM FILE HANGER CLIPS SLIP OVER DRAWER SIDES
|
| Aluminum Rectangular File Rail
...plus other(s)
|
SOLD IN BAGS OF 20, ALUMINUM FILE HANGER CLIPS FIT DRAWER SIDES UP TO 7/16" THICK:
SEPARATE ALUMINUM RAILS (TWO SECTIONS, EACH 4' LONG) ALLOW YOU TO DESIGN AND INSTALL FILE STORAGE BASED UPON YOUR NEEDS.
|
|
|
|
Advanced Search Tools
Browse
will