|
|
|
Bits Router/molding/crown Molding
|
NEW FREUD® WIDE CROWN MOLDING SYSTEM
|
| Crown Molding System Upper 1 Bit
...plus other(s)
|
EACH OF THE BITS IN THE ARCHITECTURAL MOLDING SERIES' WIDE CROWN MOLDING SYSTEM PRODUCES ONE-HALF OF THE MOLDING PROFILE - THREE FOR THE UPPER PORTION; THREE FOR THE LOWER. MIX OR MATCH BITS TO PRODUCE NINE DIFFERENT DESIGNS:
USE ONLY IN A ROUTER TABLE WITH MINIMUM 6" HIGH FENCE AND FEATHERBOARDS AND HOLD DOWNS TO MILL HARDWOOD OR SOFT WOOD TO MATCH YOUR PROJECT. ONCE FINISHED, USE THE MOLDING BEVEL CUTTER TO ROUT PERFECT 38° AND 52° BEVELS ON THE STOCK. RED, NON-STICK PERMA-SHIELD® COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Machinery Accessories - Table Saws
|
DUAL PRESSURE FEATHERBOARD CAN BE USED IN NUMEROUS APPLICATIONS
|
| Dual Pressure Router Featherboard
|
FINGERS OF DIFFERENT WIDTH ON OPPOSITE SIDES PROVIDE THE ROUSSEAU CO. MODEL 3301-5 DUAL PRESSURE FEATHERBOARD WITH JUST THE RIGHT AMOUNT OF PRESSURE TO HOLD STOCK FIRMLY AGAINST A ROUTER TABLE OR OTHER TOOL FENCE:
HIGH IMPACT ABS PLASTIC WITH MACHINED ALUMINUM GUIDE BAR THAT LOCKS INTO PLACE IN STANDARD 3/8" X 3/4" T-SLOT. SLOTTED FOR 6-1/2" TRAVEL. T-SLOT NUTS CAN BE REMOVED FOR MOUNTING IN OTHER T-TRACKS. TEN ENCLOSED 1/4" SPACERS RAISE FEATHERBOARD UP TO 1-1/2" ABOVE WORK SURFACE. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
LOW PROFILE MJ SPLITTER™ ENSURES ACCURATE TABLESAW CUTTING AND HELPS ELIMINATE KICKBACK
|
| Mj Splitter Kit, Regular Kerf Saw Blade
...plus other(s)
|
SPECIFICALLY DESIGNED FOR MOUNTING INTO ZERO CLEARANCE TABLESAW INSERTS THAT HAVE NO EXISTING SPLITTER OPENING, THE MICROJIG MJ SPLITTER™ HELPS PREVENT BINDING AND TWISTING THAT CAN RESULT IN BURNED BOARDS AND DANGEROUS KICKBACK:
MULTIPLE ALIGNMENT SURFACES GENERATE SLIGHT TENSION - LIKE A MINI FEATHERBOARD - JUST BEHIND THE SAWBLADE. FOOLPROOF INSTALLATION - ONCE IN PLACE, SPLITTERS ARE EASILY INSERTED OR REMOVED BY HAND. 138-329 - SP-0125 USE WITH STANDARD KERF 10" SAWBLADES; 0.118" TO 0.145" RANGE. 138-332 - SP-0100TK FOR THIN KERF 10" SAWBLADES; 0.090" TO 0.118" RANGE. EACH INCLUDES TWO SPLITTERS, DRILL GUIDE, DRILL BIT, FOUR WOOD SCREWS AND COMPLETE INSTRUCTIONS. 90° CUTS ONLY - WILL NOT WORK WITH A TILTED ARBOR. USE WITH OR WITHOUT MICROJIG GRR-RIPPER® SYSTEM 122-372. ONE YEAR MANUFACTURER'S WARRANTY. USA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
RED PLASTIC ZERO CLEARANCE INSERT FOR CRAFTSMAN® TABLESAWS 95-610. MAKE YOUR OWN INSERT USING THE CORRECT THICKNESS OF UHMW PLASTIC 836-990.
|
|
|
|
Machinery Accessories - Table Saws
|
MAGSWITCH™ PERMANENT MAGNET FEATHERBOARDS OFFER UNBELIEVEABLE HOLDING POWER
|
| Table Featherboard W/30mm Magnets
...plus other(s)
|
|
|
|
Machinery Accessories - Table Saws
|
KREG® ROUTER TABLES MAKE SETUP A SNAP
|
| Kreg Prs3010 Trueflex Featherboard
...plus other(s)
|
|
|
|
Machinery Accessories - Table Saws
|
FEATHERBOARDS HELP CONTROL STOCK OF ALMOST ANY HEIGHT AND WIDTH
|
| Feather Board
...plus other(s)
|
MAKE CUTTING WOOD ON YOUR TABLE SAW MORE MANAGEABLE AND ACCURATE BY USING THESE FINELY CRAFTED WOOD FEATHERBOARDS:
FENCE MOUNTED FEATHERBOARD HOLDS STOCK FIRMLY AGAINST TABLE SINCE IT PROVIDES DOWNWARD PRESSURE AFTER CLAMP-MOUNTING ONTO YOUR TABLE SAW FENCE. STANDARD FEATHERBOARD PRESSES WORKPIECE HORIZONTALLY AGAINST THE FENCE AS YOU MAKE YOUR CUT - FITS STANDARD MITER SLOTS. EACH FEATHERBOARD INCLUDES ALL PARTS SHOWN (TABLE SAW, FENCE AND WORKPIECE NOT INCLUDED). BUY BOTH AT THE SAME TIME AND SAVE! IMPORTED.
|
|
|
|
Machinery Accessories - Table Saws
|
INCRA® 18" MITER SLIDER
|
| Incra 18" Miter Slider & Plans
|
THE INCRA® 18" MITER SLIDER HAS AN ALUMINUM RUNNER THAT ADJUSTS FOR PERFECT SLIDING ACTION IN ANY 3/4" X 3/8" MITER SLOT. OR, IT CAN BE LOCKED INTO PLACE FOR OTHER OPERATIONS. WON'T WARP, SHRINK OR SWELL LIKE WOODEN RUNNERS. FREE, ILLUSTRATED PLANS SHOW HOW TO BUILD A VARIETY OF SHOP MADE TABLESAW JIGS. USA. PLANS INCLUDE:
CROSSCUT BOX - BOX FIRMLY SUPPORTS STOCK OFF OF TABLE SURFACE FOR SMOOTH CUTS, WHILE MAINTAINING PERFECTLY SQUARE CUTS. MITER JIG - JIG GUARANTEES ACCURATE AND REPEATABLE 45° CUTS WITHOUT INCONVENIENCE OF SETTING UP MITER GAUGE, TILTING THE BLADE OR TRIAL AND ERROR CUTS. FEATHER BOARD - FEATHER BOARD LOCKS INTO MITER SLOT TO HOLD STOCK FIRMLY AGAINST RIP FENCE.
|
|
|
|
Machinery Accessories - Table Saws
|
ECONOMICAL FEATHERBOARD HOLDS ITS POSITION
|
| Featherboard (plastic)
|
MOST FEATHERBOARDS ARE HELD IN POSITION BY ONE SCREW, WHICH MEANS IT DOESN'T TAKE LONG BEFORE THE PRESSURE AGAINST THE WOOD IS REDUCED. THIS ECONOMICAL FEATHERBOARD HAS TWO LOCKING SCREWS SO IT'S ALMOST IMPOSSIBLE FOR IT TO COME OUT OF ALIGNMENT, WHICH MEANS THAT YOU WON'T BE CONSTANTLY ADJUSTING IT:
VERY DURABLE PLASTIC WITH 13 "FINGERS" SPANNING 4-1/2". 7/16" MINIMUM DISTANCE FROM THE BLADE; 3-9/16" MAXIMUM. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
SUPERCHARGE YOUR ROUTER TABLE WITH QUALITY ACCESSORIES
|
| Dual Pressure Featherboard
...plus other(s)
|
USING QUALITY ROUSSEAU CO. ROUTER TABLE ACCESSORIES YOU'LL GET RESULTS THAT WILL SAVE YOU TIME AND MONEY:
RM3509 DELUXE ROUTER BASE PLATE: 9" X 12" X 3/8" THICK THERMOSET PHENOLIC PLATE HAS 1/4" X 1/2" RABBETED LIP FOR FLUSH MOUNTING INTO 3/4" OR THICKER TOPS. FITS ROUTER BITS UP TO 3-7/8". SMALL OPENING ACCEPTS STANDARD TEMPLATE GUIDES. REMOVABLE GLASS-REINFORCED POLYCARBONATE RINGS CREATE 2-5/8" AND 3-7/8" OPENINGS. INCLUDES FIVE POSITION SHOULDER PIN.
3322 BASIC ROUTER FENCE IS EXTRUDED ALUMINUM WITH TWO 13" X 3-1/4" ADJUSTABLE WOODEN FACES: AVAILABLE IN 22", 30" OR 42" LENGTHS INCLUDES INTEGRAL 2-1/2" DUST PORT AND BIT GUARD ADJUSTABLE OUTFEED SIDE ALLOWS FOR FULL STOCK REMOVAL ACCOMMODATES ROUTER BITS UP TO 3-7/8" DIA. MOUNTS EASILY BY DRILLING TWO 3/8" THROUGH HOLES 15-1/4" APART. INCLUDES SPRING LOADED LEXAN®) GUARD, TWO STAR KNOBS, MOUNTING HARDWARE AND COMPLETE INSTRUCTIONS.
RM3509-IR INSERT RINGS W/SHOULDER PIN ARE USED AS BASE PLATE REPLACEMENTS.
RM3509-T BASE PLATE INSTALLATION KIT: A QUICK WAY TO INSTALL THE DELUXE ROUTER BASE PLATE. INCLUDES CUSTOM TEMPLATE GUIDES TO CUT THROUGH HOLE AND RABBET, DOUBLE STICK TAPE FOR MOUNTING AND COMPLETE INSTRUCTIONS. . FOR USE WITH YOUR OWN 1/2" STRAIGHT ROUTER BIT. USA.
|
|
|
|
Machinery - Shapers
|
POWERMATIC® PM2700 2 SPEED SHAPER IS LOADED WITH FEATURES
|
| Pm2700 Shaper 3hp 1ph 230v
...plus other(s)
|
THE POWERMATIC® PM2700 SHAPER FEATURES DIGITAL SPINDLE HEIGHT READOUT, 3/4" AND 1-1/4" INTERCHANGEABLE SPINDLE COLLETS AND YOUR CHOICE OF MOTOR OPTIONS:
3HP OR 5HP, 230V, 1PH OR 3PH TEFC MOTOR - 7,500 AND 10,000 RPM REVERSIBLE SPINDLE SPEEDS. 4" SPINDLE TRAVEL. 30" X 40" CAST IRON TABLE W/MITER SLOT AND INDEPENDENTLY ADJUSTABLE 4-7/8" X 18-3/4" ALUMINUM FENCE. 7-3/8" DIA. TABLE OPENING - 2-3/4 AND 3-7/8" DIA. INSERT OPENINGS. ABOVE AND BELOW TABLE 4" DUST PORTS - MINIMUM 600 CFM REQUIRED. DELUXE MITER GAUGE, CHROME PLATED WHEELS AND FEATHERBOARD HOLD DOWNS INCLUDED. 45"H X 40"W X 37"D. 664 LBS. NET WEIGHT; 690 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURERS WARRANTY. IMPORTED.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
COMPLETE ROUTER TABLE/ROUTER FENCE SYSTEMS
|
| Featherboards For Router Table
...plus other(s)
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
ROUTER TABLES THAT MATCH WORKSHOP OR JOB SITE REQUIREMENTS
|
| Super Size Folding Router Table
...plus other(s)
|
WHETHER YOU MOSTLY USE YOUR ROUTER IN THE SHOP OR ON THE JOB, ONE OF THESE ROUSSEAU CO. ROUTER TABLES SHOULD BE ABLE TO MEET YOUR REQUIREMENTS:
EACH COMES WITH A PRECISION T-STYLE TRACK FOR MITER GAUGES, CUSTOM JIGS, FIXTURES AND FEATHERBOARDS AND NON-SKID, NON-MARRING RUBBER FEET. REMOVABLE PHENOLIC PLATE, INSERT RINGS TO FIT ROUTER BITS UP TO 3-7/8", UNIQUE LEVELING SYSTEM AND EXCLUSIVE, PATENTED CORNER SNUGGERS™ ALSO INCLUDED. BOTH ARE PRE-DRILLED FOR OPTIONAL MODEL 3506 POWER SWITCH.
3350 SUPER SIZE ROUTER TABLE: 44"L X 24"W X 1-1/8"H (1,056 SQ. IN.) LAMINATED TOP - 36-1/2" WORK HEIGHT WITH FOUR LEVELING FEET. INCLUDES ADJUSTABLE BALTIC BIRCH FACEBOARDS, PRECISION-MACHINED 24" ALUMINUM FENCE, INTEGRAL MOLDED DUST COLLECTION PORT AND CLEAR SAFETY GUARD.
3111 JOBSITE FOLDING ROUTER TABLE: 24"L X 19"W (456 SQ. IN.) WORK SURFACE - 14" WORK HEIGHT WITH HEAVY-DUTY TUBULAR STEEL LEGSET. PRE-DRILLED HOLES ALLOW WORKING FROM EITHER SIDE OF THE TABLE. INCLUDES MDF FACEBOARDS, 24" ALUMINUM FENCE, INTEGRAL DUST COLLECTION PORT AND CLEAR SAFETY GUARD. FOLDS TO 32" X 24" X 4" FOR EASY TRANSPORT AND COMPACT STORAGE. LIFETIME MANUFACTURER'S WARRANTY. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ROUSSEAU CO. POWER SWITCH - 104-744.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
FREUD® PORTABLE AND STATIONARY ROUTER TABLES
|
| Bf3510 Universal Featherboard
...plus other(s)
|
FREUD® PORTABLE AND STATIONARY ROUTER TABLES HAVE A LARGER CENTER OPENING TO ALLOW ROUTER (NOT INCLUDED) TO BE REMOVED FROM THE TOP AND FEATURE STANDARD 3/4" T-TRACK FOR INFINITE ADJUSTABILITY:
RTP1000 ULTIMATE PORTABLE ROUTER TABLE: 23-1/2" X 18-1/2" WORK SURFACE - 14" TABLE HEIGHT. LIGHTWEIGHT, STURDY LEG SYSTEM FOLDS DOWN TO 4" WHEN NOT IN USE. INCLUDES ROUTING TIPS & TECHNIQUES CD RTS5000 STATIONARY ROUTER TABLE: 31-1/2" X 23-1/2" WORK SURFACE - 32" TO 38" TABLE HEIGHT. ADJUSTABLE STAND HAS STURDY 16GA STEEL LEGS.
EACH ALSO INCLUDES 9" X 12" INSERT PLATE WITH LEVELING SCREWS, TWO SNAP DOWN RINGS, STARTER PIN AND THE SH-5 MICRO ADJUSTABLE FENCE WITH DUST PORT ACCURATE TO 0.001". SH-5 PREMIUM ROUTER TABLE FENCE SYSTEM - CAPABLE OF MICRO ADJUSTMENTS FOR PRECISE POSITIONING OF INFEED AND OUTFEED FENCES - COMES WITH A BUILT IN DUST PORT. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Portable Power Tool Accessories - Routers & Trimmers
|
VERSATILE BOSCH BENCHTOP ROUTER TABLES IN TWO DIFFERENT STYLES
|
| Ra1181 Benchtop Router Table
...plus other(s)
|
BOSCH BENCHTOP ROUTER TABLES ARE AVAILABLE IN CONVENTIONAL STYLE AND CABINET STYLE, WHICH OFFERS BETTER DUST COLLECTION AND NOISE REDUCTION:
RA1181 BENCHTOP ROUTER TABLE: 18" X 27" DIE CAST ALUMINUM TOP WITH 4-7/8" X 25-1/8" ALUMINUM FENCE WITH ADJUSTABLE MDF FACE PLATES. 2-1/2" DUST COLLECTION PORT. 14-1/2"H X 27"W X 16"D; WEIGHS 30 LBS. RA1171 BENCHTOP CABINET-STYLE ROUTER TABLE: LAMINATED TOP WITH 15-1/2" X 25" WORK SURFACE AND SIMILAR ALUMINUM FENCE. TWO 2-1/2" DUST COLLECTION PORTS. 14-3/4"H X 25-1/2"W X 15-7/8"D; WEIGHS 42 LBS. EACH INCLUDES 3 MOUNTING PLATE INSERT RINGS, HARDWARE, ADJUSTABLE CLEAR GUARD, SHIMS AND STARTER PIN AND GUARD. TWO ADJUSTABLE FEATHERBOARDS ATTACH TO FENCE AND TABLE FOR GUIDANCE AND KICKBACK PROTECTION. 3-5/8" MAXIMUM THROAT OPENING. 120V, 15A OUTLET W/6' POWER CORD. NOTE: OPTIONAL FLOOR STAND AND MOUNTING PLATE CAN ONLY BE USED WITH THE RA1181 ROUTER TABLE. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
will