|
|
|
Edgebanding/veneer And Composite
|
EDGEMATE® EDGEBANDING HAS HEAT SET ADHESIVE BACKING FOR HAND OR MACHINE APPLICATION
|
| 13/16" Alder-fleece-preglued
...plus other(s)
|
|
EDGEMATE® PREGLUED EDGEBANDINGS ARE DESIGNED FOR STRAIGHT LINE AND SIMPLE RADIUS OR CONTOUR APPLICATIONS DONE WITH HANDHELD IRONS OR HOT AIR EDGEBANDING MACHINES. CHOOSE FROM TEN VARIETIES OF REAL WOOD VENEER BANDING WITH FLEECE BACKING OR KRAFT (PAPER) BACKING, AND FOUR COLORS OF UNBACKED POLYESTER BANDING, ALL WITH HOT MELT ADHESIVE. FLEECE EDGE BANDINGS ARE .022"+/-.002" THICK, FEATURE COLORED FLEECE BACKING, COLOR MATCHED FINGER JOINTS AND HIGH QUALITY PRE-APPLIED HOT MELT ADHESIVE. 13/16" WIDTH FLEECE EDGE BANDING IS AVAILABLE IN 50 FOOT OR 250 FOOT ROLLS; 1-1/2" WIDTH IS AVAILABLE IN 250 FOOT ROLLS; 2" WIDTH IS AVAILABLE IN 25 FOOT ROLLS. KRAFT EDGE BANDINGS ARE .020"+/-.002" THICK, FEATURE A PAPER BACKING, COLOR MATCHED FINGER JOINTS A MINIMUM OF 8 FEET APART, AND HIGH QUALITY PRE-APPLIED HOT MELT ADHESIVE. PAPER BACKING ADDS STABILITY AND ADDITIONAL STRENGTH FOR SMOOTHER INSTALLATION AND CLEANER TRIMMING. 7/8" KRAFT EDGE BANDINGS ARE PROVIDING GREATER IMPACT RESISTANCE; AVAILABLE IN 250 FOOT ROLLS. FINGER JOINTS ON KRAFT BACKED ROLLS ARE A MINIMUM OF 8 FEET APART. ALL EDGEBANDINGS ARE SANDED SMOOTH AND UNFINISHED. USA.
|
|
|
|
Edgebanding/veneer And Composite
|
EDGEMATE® EDGEBANDINGS FOR AUTO EDGEBANDERS
|
| 7/8" Mahogany-kraft-no-glue-auto
...plus other(s)
|
|
DESIGNED FOR USE ON AUTOMATIC EDGEBANDING MACHINES WITH BUILT-IN GLUE POTS. 7/8" WIDE X 500' ROLLS AVAILABLE IN MAHOGANY, WHITE BIRCH, RED OAK, WHITE OAK, WHITE ASH AND WALNUT IN YOUR CHOICE OF KRAFT EDGE OR FLEECE EDGE STYLES. KRAFT EDGE BANDINGS ARE .020"±.002" THICK, FEATURE A PAPER BACKING AND EXPERTLY MATCHED FINGER JOINTS WHICH BLEND TOGETHER TO BE NEARLY INVISIBLE WHEN INSTALLED. FINGER JOINTS ARE A MINIMUM OF 8 FEET APART. PAPER BACKING ADDS STABILITY FOR SMOOTHER INSTALLATION AND SERVES AS A BARRIER BETWEEN FINISHING MATERIALS AND THE GLUE LINE. CROSS LINKED LAMINATION STRENGTHENS FINGER JOINTS-LESS CHANCE OF SEPARATION DURING APPLICATION. FLEECE EDGE BANDINGS ARE .022"±.002" THICK, FEATURE COLORED FLEECE BACKING AND CAREFULLY MATCHED FINGER JOINTS. (FLEECE EDGE IS THE "ORIGINAL" EDGEBANDING STYLE.) MELAMINE AND PVC BANDINGS DO NOT HAVE A BACKER. 1,200' ROLLS AVAILABLE IN WHITE,ALMOND, GRAY, BLACK AND FOLKSTONE PVC. 1200' ROLLS ARE LIMITED TO QUANTITY ON HAND.
|
|
|
Click for More Info
|
Machinery - Edgebanding
|
SAFETY SPEED CUT 60HA HOT AIR EDGE BANDER GIVES AFFORDABLE TOP PERFORMANCE
|
| 60ha Hot Air Edge Bander
|
|
DIGITAL ELECTRONIC TEMPERATURE AND ELECTRONIC VARIABLE SPEED CONTROL. ELECTROMAGNETIC END CUTTER DOES NOT REQUIRE COMPRESSED AIR. ACCUTRIM EDGE TRIMMER USES PORTER-CABLE 28,000 RPM INDUSTRIAL TRIM MOTORS FOR FINISHED EDGES THAT DONT NEED FILING OR SANDING. USA. SPECIFICATIONS MOTOR: 230V, 20A, 1PH OPERATION TYPE: HOT AIR FEED: 0-15 FPM TRIM: AUTOMATIC TOP & BOTTOM CAPACITIES WIDTH: 1/2" - 1-3/4" THICKNESS: 1 MM DIMENSIONS: 40"H X 60"W X 36"D NET WEIGHT: 290 LBS. SHIPPING WEIGHT: 325 LBS.
|
|
|
|
Machinery - Edgebanding
|
SAFETY SPEED CUT 72GP GLUE POT EDGE BANDER IS AN EXTREMELY WELL MADE MACHINE AT AN AFFORDABLE PRICE
|
| 72gp Glue Pot Edge Bander
|
DIGITAL ELECTRONIC TEMPERATURE AND ELECTRONIC VARIABLE SPEED CONTROL. ELECTROMAGNETIC END CUTTER DOES NOT REQUIRE COMPRESSED AIR. ACCUTRIM EDGE TRIMMER USES PORTER-CABLE® 28,000 RPM INDUSTRIAL TRIM MOTORS FOR FINISHED EDGES THAT DON'T NEED FILING OR SANDING. USA.
SPECIFICATIONS MOTOR: 230V, 20A, 1PH OPERATION TYPE: GLUE POT FEED RATE: 0-24 FPM TRIM: AUTOMATIC TOP & BOTTOM CAPACITIES: WIDTH: 1/2" X 1-3/4", THICKNESS: 1 MM DIMENSIONS: 72"W X 42"H X 37"D NET WEIGHT: 350 LBS. SHIPPING WEIGHT: 400 LBS.
|
|
|
|
Machinery - Edgebanding
|
WOODTEK® MAKES EDGEBANDING QUICK, EASY AND AFFORDABLE
|
| Portable Edge Bander
...plus other(s)
|
LIGHT ENOUGH TO MOVE EASILY, THE WOODTEK® BENCHTOP EDGEBANDER HAS FEATURES FOUND ON MUCH LARGER UNITS:
STEINEL HL2000P ELECTRONICALLY CONTROLLED, DOUBLE INSULATED HEAT ELEMENT. TOP MOUNTED 200° TO 1,100° F. HEAT CONTROL ALLOWS APPLICATION OF A VARIETY OF EDGEBANDING MATERIALS, SUCH AS WOOD OR POLYESTER, TO MANY DIFFERENT SUBSTRATES. 3/4" TO 2" MATERIAL CAPACITY. BUILT IN CUT OFF KNIFE HAS PALM STRIKE KNOB FOR QUICK, CLEAN CUTS. 27" X 7-1/2" LAMINATE COVERED TABLE. FENCES AND GUIDES ADJUST USING THE SAME HEX WRENCH. 110V; UL LISTED. 27"W X 27"L X 10"H OVERALL. WEIGHS 30 LBS. IMPORTED.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX® AUTOMATIC PRODUCTION EDGEBANDER EB-25 READY FOR OPERATION IN JUST 60 SECONDS
|
| Eb-25(35) Auto Edgebander
...plus other(s)
|
FOR PANEL EDGEBANDING USING PREGLUED PVC, POLYESTER, MELAMINE AND WOOD TAPE, THE FLOOR-MOUNTED VIRUTEX® EB-25 AUTOMATIC PRODUCTION EDGEBANDER, WITH POWER FEEDER, IS A PRODUCTION FACILITY POWERHOUSE:
HOT AIR SYSTEM USES ELECTRONIC TEMPERATURE CONTROL TO HEAT TO 900°F IN ONE MINUTE. MOTORIZED TRIMMING HELPS ENSURE PRECISE EDGES. BELT DRIVE PROVIDES SMOOTHER OPERATION. ONE YEAR MANUFACTURER'S WARRANTY. SPAIN.
SPECIFICATIONS:
POWER - 220VAC, 15A, 1PH. FEED - 15 FPM POWER FEEDER W/AUTO EDGE FEED. TRIM - AUTOMATIC TOP, BOTTOM, FRONT AND END. CAPACITY - 7/16" - 2-1/2". DIMENSIONS - 67.7" X 37.4" X 53.1". WEIGHT - 260 LBS. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX® AUTOMATIC PRODUCTION EDGEBANDER
|
| Automatic Benchtop Edgebander
|
FOR EDGEBANDING USING PRE-GLUED PVC, MELAMINE AND VENEER, THE VIRUTEX ® EB10C BENCH MOUNT PRODUCTION EDGEBANDER PROVIDES SIMULTANEOUS, FLUSH, TOP AND BOTTOM TRIMMING PLUS AUTOMATIC ROUGH TRIMMING OF THE ENDS:
220VAC, 15A, 1PH HOT AIR SYSTEM USES ELECTRONIC TEMPERATURE CONTROL TO HEAT TO 900°F IN ONE MINUTE. 0.3" TO 2.55" THICKNESS CAPACITY. NO COMPRESSED AIR OR DUST COLLECTOR REQUIRED. TO EDGEBAND CURVED PIECES, REMOVE THE TRIMMING UNIT AND USE THE FOOT PEDAL TO CUT THE ENDS. 17"H X 37.4"W X 23.6"D. 79 LBS. NET WEIGHT; 84 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. SPAIN. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Edgebanding
|
VIRUTEX BENCHTOP / PORTABLE GLUE POT EDGE BANDER CAN BE EASILY TRANSPORTED TO JOBSITES
|
| Glue Pot Edge Bander, Bench Top/portable
|
|
GLUE POT EDGE BANDER WITH TEMPERATURE CONTROL FOR PVC, POLYESTER, MELAMINE, WOOD VENEER TAPES OF UP TO 1/8" (3 MM) THICK AND PLASTIC LAMINATE STRIPS. EASY AND FAST SET UP OF TAPE HEIGHT AND PANEL THICKNESS. AUTOMATIC TAPE FEED WITH CONTROL. FAST HEAT UP TIME OF 10 MINUTES. RUSTIC IRON DROP PULLS ADD A UNIQUE APPEARANCE TO DOORS AND CABINETS. LIMITED TO QUANTITIES IN HAND
|
|
|
|
Machinery - Edgebanding
|
WOODTEK® MAKES EDGEBANDING QUICK, EASY AND AFFORDABLE
|
| Edgebander With Free Edge Trimmer
|
LIGHT ENOUGH TO MOVE EASILY, THE WOODTEK® BENCHTOP EDGEBANDER HAS FEATURES FOUND ON MUCH LARGER UNITS:
STEINEL HL2000P ELECTRONICALLY CONTROLLED, DOUBLE INSULATED HEAT ELEMENT. TOP MOUNTED 200° TO 1,100° F. HEAT CONTROL ALLOWS APPLICATION OF A VARIETY OF EDGEBANDING MATERIALS, SUCH AS WOOD OR POLYESTER, TO MANY DIFFERENT SUBSTRATES. 3/4" TO 2" MATERIAL CAPACITY. BUILT IN CUT OFF KNIFE HAS PALM STRIKE KNOB FOR QUICK, CLEAN CUTS. 27" X 7-1/2" LAMINATE COVERED TABLE. FENCES AND GUIDES ADJUST USING THE SAME HEX WRENCH. 110V; UL LISTED. 27"W X 27"L X 10"H OVERALL. WEIGHS 30 LBS. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.