|
|
|
Hand Tools - Not Listed Elsewhere
|
5" CONTOUR GAUGES
|
| 5" Contour Gauge "a"
...plus other(s)
|
CONTOUR GAUGES HAVE MANY, NON-MARRING PLASTIC FINGERS THAT MOVE TO FOLLOW INTRICATE CONTOURS, CURVES OR PROFILES. THIS QUICKLY CREATES AN EXACT MODEL FROM FINISHED OR UNFINISHED WORKPIECES WITHOUT SCRATCHING. THEY WORK GREAT FOR LATHE OR BANDSAW WORK WHERE YOU NEED TO DUPLICATE A PART OR TRANSFER CONTOURS FOR FITTING PANELS, MOLDINGS OR LAY OUT AROUND FIXTURES:
SIMPLY PRESS GAUGE AGAINST CONTOUR AND THE 1/16"X 4" MOVING, PLASTIC FINGERS TRANSFER THE MATCHING SHAPE TO THE TOP SIDE OF THE GAUGE. THEN JUST MARK AND CUT FOR AN EXACT MATCHING FIT. FINGERS WILL HANDLE SHAPES TO 1-1/4" DEEP. SHAPE OF THE FINGER ENDS ALLOWS TREMENDOUS VERSATILITY WHEN GETTING INTO TIGHT SPOTS. GAUGES HAVE GRADUATIONS ON BOTH SIDES TO MAKE TRANSFERRING TRICKY SHAPES EASIER. SMALL GAUGES MODELS "A" OR "B" HANDLE LENGTHS UP TO 5" EACH. LARGE GAUGE "A" WORKS FOR LENGTHS UP TO 10". GAUGE "B" IS SIMILAR TO "A" BUT IS MADE TO CONNECT END-TO-END WITH GAUGES "A" FOR ADDITIONAL LENGTH. IMPORTED.
|
|
|
|
Machinery Accessories - Lathes
|
VEGA MINI/MIDI LATHE DUPLICATORS
|
| Midi-10, 10" Midi Duplicator
...plus other(s)
|
DESIGNED FOR MAKING IDENTICAL SMALL PARTS, THE VEGA 8500 AND 8562 LATHE DUPLICATORS PROVIDE 10" (MIDI-10) OR 24" (MIDI-24) TRAVEL WHILE ALLOWING YOU TO REMOVE UP TO 1/2" PER PASS WHEN FOLLOWING AN ORIGINAL TURNING OR TEMPLATE:
WILL FIT ALMOST ANY BRAND MINI OR MIDI LATHE WITH A 10" OR 12" SWING (SPECIFY YOUR LATHE BRAND AND MODEL WHEN ORDERING). DUPLICATOR ASSEMBLY, MOUNTING HARDWARE, MASTER TURNING HOLDERS, RESHARPENABLE M2 HIGH SPEED STEEL CUTTER (1/16" TIP RADIUS) AND INSTRUCTIONS INCLUDED (LATHE SHOWN NOT INCLUDED). EASILY CUTS HARDWOODS AND EXOTICS, OPTIONAL MIDI DIAMOND VEE CUTTER KIT 8557 FEATURES AN EXTENDED LIFE CARBIDE CUTTER THAT PROVIDES SUPERIOR FINISHES THAT REQUIRE LESS SANDING. ONE YEAR MANUFACTURER'S WARRANTY. USA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
DELTA 12" MIDI LATHES - 46-455. JET 10" MIDI LATHES - 136-907. JET 12" MIDI LATHES - 150-896. WOODTEK 10" MIDI LATHE - 143-009.
|
|
|
|
Machinery Accessories - Lathes
|
A LATHE DUPLICATOR DESIGNED FOR SERIOUS PRODUCTION TURNING
|
| D-16 Vega 16" Pro Duplicator
...plus other(s)
|
THE VEGA PRO DUPLICATOR FITS ALMOST ALL FULL SIZE LATHES (SPECIFY YOUR LATHE BRAND AND MODEL WHEN ORDERING) AND IS AVAILABLE WITH STANDARD 16, 36, 48, 96 OR 120 TRAVEL FOR TURNING NEWEL POSTS, CHAIR AND TABLE LEGS, SPINDLES, FINIALS AND MORE:
REMOVES UP TO 3/4 PER PASS WHILE FOLLOWING AN ORIGINAL TURNING OR TEMPLATE AND WORKS ON LATHES WITH 10 TO 16 SWINGS. COMES EQUIPPED WITH DUPLICATOR ASSEMBLY, MOUNTING HARDWARE, MASTER TURNING HOLDERS, 3 PATTERN FOLLOWERS, RESHARPENABLE M2 HIGH SPEED STEEL CUTTER, INSTRUCTIONS AND VIDEOTAPE SHOWING SETUP AND OPERATION. OVERSIZE MOUNTS REQUIRED FOR LATHES WITH MORE THAN 16 SWING. OPTIONAL SLENDER TURNING ACCESSORY IS A TRAVELING STEADY REST THAT PREVENTS SPINDLE WHIPPING, CAUSED BY SPINDLES BEING STRUCTURALLY WEAK DUE TO THEIR LENGTH TO DIAMETER RATIO. ACCESSORY BOLTS ONTO FRONT OF PRO DUPLICATOR CARRIAGE AND SUPPORTS THE SPINDLE INSIDE OF A LARGE BEARING WITH 4 OPPOSING 3/4 DIA. SETSCREWS (HANDLES UP TO 1-7/8 SQUARE STOCK; 139-460 HOLDS UP TO 1-3/8 SQUARE STOCK). WITH THE SPIRAL FLUTING ATTACHMENT, YOU FIRST TURN THE SPINDLE USING THE DUPLICATOR AND THEN MOUNT A ROUTER (NOT INCLUDED) ONTO THE DUPLICATOR. ATTACHMENT WILL ROTATE THE SPINDLE WHILE CUTTING FLUTES OR REEDS. 24 TOOTH INDEX PLATE. WILL TRAVEL UP TO 36 LONGER TRAVEL REQUIRES ADDITIONAL LADDER CHAIN. VARIABLE ROUTER BRACKET LETS YOU MOUNT A ROUND MOTOR ROUTER (NOT INCLUDED) ONTO THE PRO DUPLICATOR TOOL HOLDER SPINDLE. YOU THEN USE YOUR LATHES INDEXER TO POSITION THE TURNING FOR FLUTING. DESIGN ALLOWS VERTICAL OR TIPPED BACK ROUTER POSITIONING TO ACCOMMODATE LARGER DIAMETER TURNINGS. DIAMOND VEE CUTTER KIT FEATURES AN EXTENDED LIFE CARBIDE CUTTER THAT PROVIDES SUPERIOR FINISHES THAT REQUIRE LESS SANDING. INDEXABLE SO BOTH ENDS OF CUTTER CAN BE USED. COMES WITH HOLDER, 3/32 CARBIDE CUTTER, TORX WRENCH AND LOCKING SETSCREW. SQUARE SHOULDER CUTTER KIT USES A CARBIDE INSERT FOR CLEAN 90° LEFT OR RIGHT FACING SHOULDERS. KNOB CUTTER KIT USES A ROUND CARBIDE INSERT TO CUT FURNITURE KNOBS AND OTHER ROUND SHAPES. USA.
|
|
|
|
Machinery Accessories - Lathes
|
WOODTEK CABLE DRIVE WOOD LATHE DUPLICATOR
|
| Cable Drive Lathe Duplicator
...plus other(s)
|
TO CREATE PERFECTLY MATCHED SPINDLES, THE WOODTEK® LATHE DUPLICATOR USES A UNIQUE JAM FREE, CABLE DRIVE SYSTEM THAT FAR EXCEEDS THE PERFORMANCE OF CONVENTIONAL RACK AND PINION SYSTEMS. SPECIFICALLY ENGINEERED SO THAT ITS STYLUS CAN REACH ALL PORTIONS OF A TEMPLATE, THIS DUPLICATOR ELIMINATES THE "DEAD SPACES" LEFT AT THE ENDS BY OTHER MACHINES. THE EXTRUDED ALUMINUM CARRIAGE IS LIGHTWEIGHT, BUT STRONG, WHILE PRECISION GROUND WAYS ENSURE SMOOTH ACTION. A SAMPLE TURNING OR TEMPLATES CUT FROM MASONITE, ALUMINUM OR PLEXIGLASS CAN BE USED AS GUIDE TEMPLATES. THE DUPLICATOR IS PREPACKAGED TO FIT THE WOODTEK 12" LATHE BUT WILL FIT OTHER LATHES WITH THE ADDITION OF RISER BLOCK PACKAGES AND BED GAP CLAMP BLOCKS:
COMES WITH CARBIDE CUTTING TIPS, 1-3/4" CLAMP BLOCK, 12" SWING BOLT PACKAGE AND INSTRUCTION MANUAL. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MAXIMUM DUPLICATING LENGTH - 36". MAXIMUM RECOMMENDED CUTTING DIAMETER - 6". CARRIAGE QUILL TRAVEL - 4-1/4". MAXIMUM TEMPLATE WIDTH - 5-1/4". MAXIMUM SPINDLE TEMPLATE DIAMETER - 3". MAXIMUM RECOMMENDED CUT DEPTH PER PASS - 1/8". OVERALL DIMENSIONS - 7"H X 54"L X 16"W. WEIGHS - 90 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
- 1-1/2" BED GAP CLAMP BLOCK FITS DELTA® 14", JET® 1236, GRIZZLY 12", LAGUNA 18/47.
- 1-5/8" BED GAP CLAMP BLOCK FITS DELTA® 16" STEEL BED.
. - 1-3/4" BED GAP CLAMP BLOCK FITS GENERAL 160/260/25 SERIES, JET® 1442/1642, ONEWAY 16"/20"/24", WOODTEK® 12".
- 2-1/2" BED GAP CLAMP BLOCK FITS POWERMATIC® 3520A/4224, RICON 70-500, VICMARC VL175/200/300, WOODFAST, WOODTEK® NO.1™.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
|
|
|
|
Machinery Accessories - Lathes
|
GENERAL® MINI LATHE DUPLICATOR
|
| Mini Lathe Duplicator
...plus other(s)
|
DESIGNED TO EASILY DUPLICATE CHAIR SPINDLES, PENS AND PENCILS, GAME CALLS AND A HOST OF OTHER SPINDLE PROJECTS, THE GENERAL INTERNATIONAL® MINI-LATHE DUPLICATOR WILL FIT ALMOST ANY MINI/MIDI SIZED LATHE WITH A 6" TO 14" SWING. THE MAXIMUM DUPLICATING LENGTH IS 17-7/8" AND THE BED CLAMPING PLATE IS DESIGNED TO FIT MOST LATHE BEDS. DUPLICATOR CAN USE A SAMPLE TURNING OR A TEMPLATE AS A GUIDE:
DUPLICATOR COMES WITH MOUNTING BRACKETS, CARBIDE CUTTING TIP AND INSTRUCTION MANUAL. TWO YEAR LIMITED WARRANTY. IMPORTED.
SPECIFICATIONS:
MAXIMUM DUPLICATING LENGTH - 17-7/8". MAXIMUM RECOMMENDED CUTTING DIAMETER - 7". MAXIMUM DUPLICATING DEPTH - 3". MAXIMUM TEMPLATE WIDTH - 2". MAXIMUM SPINDLE TEMPLATE DIAMETER - 3". MAXIMUM RECOMMENDED CUT DEPTH PER PASS - 1/8". DIMENSIONS: 25" X 9.5" X 6.5". WEIGHT - 13.2 LBS.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
GENERAL MINI LATHE - 157-667.
|
|
|
|
Machinery - Lathes
|
JET® 1236 LATHE
|
| Jet 1236 Lathe
...plus other(s)
|
THE JET® JWL-1236 WOOD LATHE HAS A CAST IRON BED WITH A HEADSTOCK THAT ROTATES 360° WITH STOPS AT 45°, 90° AND 180°. THE DRIVE SYSTEM HAS VARIABLE SPEEDS FROM 500 TO 3000 RPM WITH SIX PRESET DETENTS FOR COMMONLY USED SPEEDS. A SHORT OUTBOARD BED IS SUPPLIED WITH THE LATHE FOR BOWL TURNING. AN OFFSET TOOL REST ATTACHMENT HELPS BRING THE TOOL REST IN ALIGNMENT WITH THE ROTATED HEADSTOCK FOR CONVENIENT BOWL TURNING ACCESS:
INCLUDES 12" TOOL REST, 6" FACEPLATE, SPUR CENTER, LIVE CENTER, FACE SHIELD, KNOCKOUT ROD AND INSTRUCTION MANUAL. NET WEIGHT - 183 LBS; SHIPPING WEIGHT - 210 LBS. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR: 3/4HP, 115V, 11A, 1PH. SPEED RANGE - VARIABLE FROM 500 TO 3,000 RPM. SWING OVER BED - 12" (8-3/4" OVER BASE). DISTANCE BETWEEN CENTERS - 34-1/2". HEADSTOCK SHAFT: 1"-8TPI, #2MT, 3/8" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2-1/4" TRAVEL, #2MT, 3/8" BORE. OVERALL DIMENSIONS - 44"H X 60"W X 17"D.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
ONEWAY SCROLL CHUCK - 959-585. ONEWAY TALON CHUCK - 959-627. HSS TURNING TOOLS - 142-607. CROWN PM TURNING TOOLS - 137-093. LATHE DUPLICATOR - 140-069. LATHE ACCESSORIES - 130.009. TURNING TOOLS - 100.004.
|
|
|
|
Advanced Search Tools
Browse
will