|
|
|
Bits Driver - Hex
|
14MM X 6" CABINET LEVELER
|
| 5/32" Allen Ball Driver
...plus other(s)
|
|
|
|
Bits Driver - Insert Drivers
|
BOSCH IMPACTOR™ "HAMMER AND ANVIL" SYSTEM PRODUCES TWICE THE TORQUE OF GEAR DRIVEN DRIVERS
|
| 1/4" Magnetic Nut Setter
...plus other(s)
|
|
|
|
Bits Driver - Insert Drivers
|
PATENTED ALL-HEX™ QUICK CHANGE POWER BIT EXTENSION INCREASES YOUR REACH
|
| All-hex Bit Extension-3"
...plus other(s)
|
YOUR 1/4" HEX SHANK TOOL INSERTS DIRECTLY INTO THE 5/8" CHUCK OF THE INSTY-BIT® ALL-HEX™ QUICK-CHANGE POWER BIT EXTENSION WHERE IT LOCKS INTO PLACE; TO REMOVE, SIMPLY PULL THE CHUCK SLEEVE BACK - EXTENSION FITS INTO ALL KEYED OR KEYLESS DRILLS:
NARROWER PLATED-STEEL CHUCK FITS THROUGH SMALLER HOLES FOR INCREASED VERSATILITY. HARDENED STEEL EXTENSION TRANSFERS ROTARY POWER DIRECTLY WITHOUT LOSS OF TORQUE - BLACK OXIDE FINISH PROVIDES CORROSION RESISTANCE. IDEAL FOR HSS DRILL BITS, SPADE BITS, HOLE SAWS, SCREWDRIVER BITS AND MORE - ACCEPTS ALL ANSI-, JIS- AND DIN-STANDARD ACCESSORIES. NOTE: MAXIMUM 2,500 RPM - NOT FOR USE IN IMPACT TOOLS. USA.
|
|
|
|
Bits Driver - Insert Drivers
|
DEWALT® IMPACT READY™ MAGNETIC PIVOT HOLDER ELIMINATES MANY RIGHT ANGLE DRILL NEEDS
|
| Magnetic Pivot Bit Tip Holder
|
|
QUALIFIED FOR CORDLESS IMPACT TOOLS UP TO 2000 IN-LBS OF TORQUE. LOCKING COLLAR ALLOWS FOR STRAIGHT OR ANGLED DRIVING. 20° PIVOT ANGLE FITS IN TIGHT SPACES. 1/4" HEX SHANK WORKS WITH ALL DRYWALL GUNS AND STANDARD DRILL/DRIVERS. IMPORTED.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
MAGNETIC BIT HOLDERS MAKE DRIVING SCREWS EASIER
|
| 3" Magnetic Bit Holder
...plus other(s)
|
A MAGNETIC BIT HOLDER MAGNETIZES THE DRIVER BIT SO SCREWS WON'T FALL OFF:
3" OR 6" LONG - 1/4" HEX SHANK ON ONE END, HOLDS 1/4" HEX SHANK DRIVER BITS ON THE OTHER. ONLY WORK WITH 1" LONG DRIVER BITS. USA.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
DRILL AND DRIVER BITS THAT EXCEL AT SPECIALTY APPLICATIONS
|
| 1/4-20 Hanger Bolt Driver
...plus other(s)
|
EASILY INSTALL HANGER BOLTS WITH YOUR POWER DRILL AND A HANDY, 1-3/4" LONG HANGER BOLT DRIVER:
TIGHTEN 1/4" HEX SHANK INTO DRILL CHUCK, THREAD IN HANGER BOLT AND DRIVE IT IN - REVERSE DRILL TO REMOVE DRIVER. 128-492 - SUPER MAGNETIC BIT HOLDER WITH 1/4" HEX SHANK IS 2-3/8" OAL. ADJUSTABLE DEPTH STOP. IMPORTED.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
DEPTH ADJUSTABLE BIT HOLDER
|
| Super Magnetic Bit Holder
|
SUPER MAGNETIC BIT HOLDER WITH 1/4" HEX SHANK IS 2-3/8" OAL:
ADJUSTABLE DEPTH STOP. IMPORTED.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
CONNECTOR BOLT WITH SHOULDERBA
|
| 5mm Hex Wrench
...plus other(s)
|
|
LOW PROFILE, DECORATIVE HEAD BOLT. CONNECTS COMPONENTS AT RIGHT ANGLES OR PARALLEL. FORMS A SELF-ALIGNING JOINT USING A SIMPLE THROUGH HOLE AND A JCN CONNECTOR. BRONZE FINISH.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
INTERCHANGEABLE CONNECTOR BOLTS
|
| 4mm Hex Wrench
...plus other(s)
|
A COMPLETE SYSTEM OF INTERCHANGEABLE JOINT FASTENERS FOR ALMOST ANY APPLICATION - JUST DRILL HOLES, INSTALL THE FEMALE COMPONENTS AND SCREW THE JOINTS TOGETHER. STRONG ENOUGH FOR CABINETRY, FURNITURE, FIXTURES AND MORE. FINISHED PROJECTS CAN BE KNOCKED DOWN AND REBUILT FOR EASY TRANSPORTATION AND INSTALLATION:
FEMALE COMPONENTS: STEEL DOWEL NUT - JCD - 1/4-20 X 13MM LONG: INSTALLS INTO A HOLE DRILLED AT A RIGHT ANGLE TO THE BOLT - CROSS SLOT FOR EASIER BOLT ALIGNMENT. USE WITH BC OR BA BOLTS. CONNECTOR NUT - JCN - 1/4-20 X 12MM LONG: USE WITH BC BOLT WHERE BOTH SIDES OF CONNECTION ARE EXPOSED. STATUARY BRONZE FINISH.
MALE COMPONENTS: STRAIGHT SHANK BOLT - BC - 13MM (33/64") DIA. HEAD; REQUIRES 4MM HEX DRIVE. LOW PROFILE HEAD, 1/4-20 THREAD AND STATUARY BRONZE FINISH. CONNECTOR BOLT WITH SHOULDER - BA - 17MM (11/16") DIA. HEAD; REQUIRES 5MM HEX DRIVE. 8.9MM (23/64") DIA. SHOULDER, 1/4-20 THREAD AND STATUARY BRONZE FINISH. SMALL HEAD SCREW - CW - 13MM (33/64") DIA. LOW PROFILE HEAD, 6MM THREAD; REQUIRES 4MM HEX DRIVE: DESIGNED TO CONNECT COMPONENTS AT RIGHT ANGLES STATUARY BRONZE FINISH BLENDS WITH OTHER KNOCK DOWN COMPONENTS.
|
|
|
|
Bits Driver - Not Listed Elsewhere
|
IT'S EASY TO POWER DRIVE SCREWS IN AWKWARD PLACES
|
| 11" Flex-a-bit Shaft
...plus other(s)
|
THE PATENTED EAZYPOWER® FLEX A BIT® FLEXIBLE SHAFT BENDS UP TO 90° SO YOU CAN DRIVE SCREWS IN TIGHT AREAS ONLY 6" WIDE!
OUTER COVER DOESN'T ROTATE. VERY HANDY BETWEEN STUDS AND AROUND PIPES. SHORTER SHAFT IS 7-1/2" LONG; LONGER IS 11". 1/4" HEX MALE TO FEMALE. BOTH ACCEPT ANY HEX SCREWDRIVER BIT AND WORK WITH CORDLESS SCREWDRIVERS OR DRILLS (1/4" OR LARGER CHUCK). BUY 2 AND CONNECT THEM TO EXTEND WORK LENGTH. IMPORTED.
|
|
|
|
Bits Driver - Phillips
|
QUICKSCREWS® DRIVER BITS ARE THE TOUGHEST AROUND - WE GUARANTEE IT!
|
| #1x1" Phillips Driver Bit
...plus other(s)
|
QUICKSCREWS® DRIVER BITS ARE HARDENED STEEL FOR LONG LIFE AND TO RESIST STRIPPING UNDER HARD USE:
1/4" HEX SHANKS FOR USE IN ALL DRILL/DRIVERS. AVAILABLE IN VARIOUS LENGTHS - PHILLIPS, SQUARE, TORX® OR POZI DRIVES. 1" LENGTH BITS ARE INSERT STYLE; ALL BITS 1-15/16" AND LONGER HAVE BALL DETENT. 111-986 IS A #2 PHILLIPS(REDUCED) FOR DRYWALL SCREWS. IMPORTED.
|
|
|
|
Bits Driver - Sets
|
10 PIECE DRIVE BIT SET INCLUDES MAGNETIC HOLDER
|
| 10 Piece Insert Bit Kit
|
WITH THE QUICK$CREWS® MODEL 11795 10 PIECE INSERT DRIVE BIT KIT YOU'LL HAVE JUST ABOUT EVERY BIT YOU'LL NEED - JUST ADD YOUR POWER DRILL:
#1, #2, #3 PHILLIPS. #2 REDUCED PHILLIPS. #1, #2, #3 POZIDRIV®. #1 AND #2 SQUARE. 2" LONG, 1/4" HEX SHANK, QUICK RELEASE MAGNETIC BIT HOLDER. DRIVE BITS ARE 1" LONG - SET INCLUDES NESTED PLASTIC STORAGE CASE.
|
|
|
|
Bits Driver - Sets
|
BIT NEST KEEPS DRIVER BITS HANDY AND ORGANIZED
|
| 2-pc Bit Nest-no Bits
...plus other(s)
|
|
|
|
Bits Driver - Sets
|
FLEXIBLE EXTENSION KIT FOR POWER DRIVERS
|
| Flexible Extension Set - 11 Pc
|
|
12" POWER DRIVER FLEXIBLE EXTENSION ALLOWS FIRM AND STEADY GRIP WHILE INSIDE MECHANISM ROTATES. WON'T KINK OR FRAY. ALLOWS DRIVING/REMOVING SCREWS IN NEARLY INACCESSIBLE PLACES. KIT INCLUDES #1 AND #2 X 2" PHILLIPS, #1 AND #2 X 3" PHILLIPS, #1 AND #2 X 2" SQUARE DRIVE, #1 AND #2 X 3" SQUARE DRIVE, 3/16" AND 1/4" SLOTTED DRIVER BITS. IMPORTED.
|
|
|
|
Bits Driver - Sets
|
SECURITY POWER DRIVER BIT SET 32 PIECE
|
| 32 Pc Security Driver Bits 75mm
|
ALMOST 3" LONG WITH 1/4" HEX SHANKS, THE PRECISION-MILLED, CHROME VANADIUM STEEL DRIVER BITS IN THIS 32-PIECE DRIVER SET WILL MAKE QUICK WORK OF MOST STANDARD OR SPECIALTY FASTENERS:
SET INCLUDES 4 SPANNER (4-10MM), 4 TRI-WING® (4-6MM), 3 TORQ-SET® (6-10MM), 3 POZI (NOS. 1, 2, 3), 9 STAR (2-6MM), 6 HEX (2-6MM), 2 PHILLIPS (NOS. 1, 2) AND ONE 3/16" WIDE SLOTTED. ALL FIT INTO A 2-1/8"H X 2-7/8"W X 2-1/16"D FLEXIBLE PLASTIC BIT NEST.
|
|
|
|
Bits Driver - Sets
|
SECURITY DRIVER INSERT BIT SET 33 PIECE
|
| 33pc Security Driver Bits-25mm
|
NOT A PHILLIPS, SLOTTED OR SQUARE DRIVE IN SIGHT IN THIS UNIQUE 33-PIECE SECURITY INSERT DRIVER BIT SET - ONLY 1" LONG, PRECISION-MILLED STEEL SPECIALTY DRIVERS:
123-962; SET INCLUDES 4 SPANNER (4-10MM), 4 TRI-WING® (4-6MM), 3 TORQ-SET® (6-10MM), 9 STAR (2-6MM) AND 12 HEX (SIX 2-6MM, SIX 5/32"-5/64"), PLUS A 2-3/8" LONG MAGNETIC HOLDER WITH STANDARD 1/4" HEX SHANK. ALMOST 3" LONG WITH 1/4" HEX SHANKS, THE PRECISION-MILLED, CHROME VANADIUM STEEL DRIVER BITS IN THIS 32-PIECE DRIVER SET WILL MAKE QUICK WORK OF MOST STANDARD OR SPECIALTY FASTENERS:
123-959;SET INCLUDES 4 SPANNER (4-10MM), 4 TRI-WING® (4-6MM), 3 TORQ-SET® (6-10MM), 3 POZI (NOS. 1, 2, 3), 9 STAR (2-6MM), 6 HEX (2-6MM), 2 PHILLIPS (NOS. 1, 2) AND ONE 3/16" WIDE SLOTTED. ALL FIT INTO A 1/2"H X 2-5/8"W X 1-7/8"D FLEXIBLE PLASTIC BIT NEST - ADDITIONAL BIT NEST CAN BE USED AS A COVER OR STORAGE FOR OTHER BITS.
|
|
|
|
Bits Driver - Sets
|
VERY HANDY, VERY WELL MADE 32-PIECE SCREWDRIVER SET
|
| 32 Piece Screwdriver Set
|
A VERY HIGH QUALITY COLLECTION OF TOOLS, THE INSTY·BIT® 87610 32-PIECE SCREWDRIVER SET COMES WITH A SOLID METAL T-HANDLE ALONG WITH A GREAT SELECTION OF 1/4" HEX BITS AND ADAPTERS:
SIXTEEN 2 SCREWDRIVER BITS - P1(3), P2(5), 6-8(3), 8-10(2), S2(3). EIGHT 1 SCREWDRIVER BITS - P1, P2(2), 6-8(2), S2(2), 8-10. 2 MAGNETIC NUT SETTERS - 1/4, 5/16. 2 SOCKET ADAPTERS - 1/4, 3/8. 3" SCREW GUIDE. 6" POWER BIT EXTENSION. 1-3/4 LONG, SOLID METAL STUBBY HANDLE. PROTECTIVE BLOW MOLDED CASE. USA.
|
|
|
|
Bits Driver - Sets
|
DRIVER BIT AND NUTSETTER PACKAGE
|
| 21-pcs Driver Bit & Nut Setter Set
|
YOU GET THE STRENGTH AND DURABILITY OF HEAT TREATED SCREW AND NUT DRIVER BITS DESIGNED FOR PROFESSIONAL USE IN THE DEWALT 2161 21-PIECE KIT. YOU GET THE STRENGTH AND DURABILITY OF HEAT TREATED SCREW AND NUT DRIVER BITS DESIGNED FOR PROFESSIONAL USE IN THE DEWALT 2161 21-PIECE KIT:
THE ADVANCED HARDENING PROCESS USED IN THESE TOOLS ALLOWS THEM TO PROVIDE HIGHER TORQUE AND IMPROVED DRIVING POWER, SO YOU GET JOBS DONE FASTER AND MORE EFFICIENTLY. NEATLY PACKAGED IN A HEAVY-DUTY CASE MADE FROM DURABLE INDUSTRIAL-GRADE ABS MATERIAL WITH AN INTERLOCKING HINGE AND A SLIDING RUBBER LOCK TO KEEP THE CASE CLOSED. LABELED SLOTS FOR EACH BIT AND AN ADVANCED BIT HOLDER HELP YOU STAY ORGANIZED AND ENSURE THAT YOU KNOW WHICH BITS ARE WHICH AT A GLANCE. INCLUDED IN THIS KIT ARE A NO. 1, NO. 3, AND SIX NO. 2 1-INCH PHILLIPS INSERT BITS, NO. SIX, NO. EIGHT, AND NO. 10, SLOTTED 1-INCH BITS, A NO. 1, NO. 3, AND THREE NO. 2 SQUARE RECESS BITS, A NO. 3 PHILLIPS TWO-INCH POWER BIT, A NO. 2 SQUARE RECESS TWO-INCH POWER BIT, A QUICK-CHANGE MAGNETIC BIT HOLDER, A 1/4-INCH NUTDRIVER, AND A 5/16-INCH NUTDRIVER. IMPORTED
|
|
|
|
Bits Driver - Sets
|
RAPID LOAD DRILL AND DRIVE SET
|
| 15-pcs Driver Bit Set & 1/4" Hex Adapter
|
DEWALT 2513 RAPID LOAD KIT ALLOWS QUICK CHANGE FROM DRILLING TO DRIVING WITHOUT THE NEED TO CHANGE CHUCKS. DEWALT 2513 RAPID LOAD KIT ALLOWS QUICK CHANGE FROM DRILLING TO DRIVING WITHOUT THE NEED TO CHANGE CHUCKS:
RAPID LOAD ADAPTER FITS ALL STANDARD 3/6" AND 1/2" DRILL CHUCKS. ONCE FASTENED INTO THE DRILL CHUCK, IT ALLOWS QUICK CHANGES FROM DRILLING TO DRIVING FOR ALL BITS WITH 1/4" HEX SHANKS. THE SET INCLUDES RAPID LOAD ADAPTER, 1/8" AND 1/4" HEX SHANK DRILL BITS, 2"X#2 PHILLIPS BIT, 2"X#2 SQUARE DRIVE BIT, 1"X#1 PHILLIPS BIT, 4EA 1"X#2 PHILLIPS BIT, 1"X#1 SQUARE DRIVE BIT, 2EA 1" X #2SQUARE DRIVE BITS, 1"X#8 SLOTTED BIT AND MAGNETIC BIT HOLDER IN A STURDY ABS CASE. IMPORTED.
|
|
|
|
Bits Driver - Sets
|
DEWALT® 12V TOOLS ARE COMPACT, LIGHTWEIGHT, TOUGH AND FEATURE LITHIUM ION BATTERY TECHNOLOGY
|
| 15-pcs Driver Bit/nut Setter, Mag Case
...plus other(s)
|
DEWALT® 12V TOOLS AND INSTRUMENTS HAVE ALL THE FEATURES YOU EXPECT IN A LARGER TOOL PLUS THE LIGHTWEIGHT COMPACT CONVENIENCE OF LITHIUM ION BATTERIES.
ALL TOOLS FEATURE A 12V, 1.3A-H BATTERY THAT CHARGES IN 40 MINUTES. BATTERIES ARE ERGONOMICALLY FITTED TO THE BASE OF THE HANDLE TO ALLOW FOR A CONTOURED GRIP AND PROVIDE A FLAT BOTTOM TO STAND THE TOOL. MID-HANDLE GRIP GIVES THE TOOL GREAT BALANCE. DRILLS, DRIVERS AND IMPACTS ARE TRIGGER-ACTIVATED LED LIT FOR SHADOW FREE OPERATION. THE INSPECTION CAMERA HAS A REMOVABLE CORDLESS SCREEN FOR REMOTE VIEWING AND WORKING IN CONFINED SPACES. TOOL SWITCHES INCLUDE THERMAL OVERLOAD PROTECTION FOR THE TOOL AND DEEP DISCHARGE PROTECTION FOR THE BATTERY. 3 YEAR MANUFACTURER'S LIMITED WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
