|
|
|
Bits Drill And Boring - Accessories
|
DOWEL CENTERS ENSURE ACCURATE LAYOUTS
|
| 1/2" Dia. Dowel Centers
...plus other(s)
|
FUNCTIONAL DOWEL CENTERS ARE NICKEL PLATED STEEL WITH SHARP POINTS FOR PRECISE DOWEL HOLE CENTER MARKING IN HARD OR SOFT WOOD:
AVAILABLE AS SETS OF 10 OF EACH SIZE OR A COMBINED SET OF 40. USA.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM® TANDEM™ BORING TEMPLATE ASSURES PERFECT ALIGNMENT FOR MOUNTING HOLES
|
| Tandem Boring Template
...plus other(s)
|
|
THE TANDEM™ BORING TEMPLATE IS DESIGNED TO PROPERLY ALIGN ALL HOLES REQUIRED FOR MOUNTING TANDEM™ SLIDES. WORKS FOR ALL STYLES OF TANDEMPLUS™ AND TANDEMPLUSBLUMOTION™ SLIDES ACCESSORY TOOL KIT INCLUDES 1-6MM DIAMETER DRILL STOP COLLAR, 1-2.5MM EXTENSION CHUCK, 1-SCREWDRIVER BIT AND ONE HEX KEY. 6MM AND 2.5MM DRILL BITS MUST BE PURCHASED SEPARATELY. MANUFACTURER'S LIMITED LIFETIME WARRANTY. AUSTRIA
|
|
|
|
Bits Drill And Boring - Accessories
|
METABOX™ - A DRAWER SYSTEM WITH ENDLESS POSSIBILITIES
|
| Universal Manual Drilling Template
...plus other(s)
|
THE BLUM® METABOX™ SYSTEM FEATURES DURABLE WHITE EPOXY COATED DRAWER SIDES WITH INTEGRATED RUNNERS AVAILABLE IN 3-3/8", 4-5/8" AND 5-7/8" HEIGHTS:
100 LBS. STATIC LOAD CAPACITY; 75 LBS. DYNAMIC LOAD CAPACITY. FULL EXTENSION (SERIES 330) DRAWERS HAVE A 3/4" OVER EXTENSION WHEN FULLY OPENED. 3/4 EXTENSION (320 SERIES) OR FULL EXTENSION (330 SERIES) CAN BE INSTALLED IN PANEL (FRAMELESS) CABINETS. 3/4 EXTENSION (320 SERIES) CAN BE USED IN FACE FRAME CABINETS WITH OPTIONAL REAR MOUNTING SOCKETS. SHOP MADE BOTTOM AND BACK PANELS SCREW ONTO DRAWER SIDES USING #6 X 5/8" PAN HEAD SCREWS. SOLD SEPARATELY. DRAWER FRONTS ATTACH TO DRAWER SIDES WITH CLIP ON BRACKETS. CHOOSE SCREW ON OR PRESS IN STYLES. SOLD SEPARATELY. FRONT BRACKET KNOCK-IN TOOL, DRILLING TEMPLATE, INSERTION RAM FOR MINIPRESS™ AND FASTENERS AVAILABLE SEPARATELY. SOLD IN FULL CARTONS ONLY. LIFETIME MANUFACTURERS WARRANTY. AUSTRIA (EXCEPT AS NOTED).
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SCREWS - 931-359.
|
|
|
|
Bits Drill And Boring - Accessories
|
BORE CABINET PARTS AND INSERT ALL TYPES OF BLUM® HARDWARE
|
| 10mm Shank Chuck For 1/8" Bit
...plus other(s)
|
|
|
|
Bits Drill And Boring - Accessories
|
ACCURATELY POSITION BLUM® ADAPTER PLATES FOR FACE FRAME HINGES
|
| Platemate Boring Template
...plus other(s)
|
THE BLUM® PLATEMATE™ JIG CLAMPS TO FACE FRAMES USING LEVER ACTION TO ACCURATELY POSITION ADAPTER PLATES:
ADJUSTMENT KNOB ALLOWS ACCURATE BORING IN FRAMES FROM 5/8" TO 1" THICK. SPACER SCREWS ALLOW FOR QUICK USE WITHOUT MEASURING FOR EACH PLATE. INCLUDES 2.5MM PILOT BIT AND EXTENSION, 5MM STOP COLLAR, REVERSING BUSHING SET FOR 32MM OR 40MM HOLE SPACING. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Accessories
|
YOU CAN BORE FOR BLUM® HINGES WITH YOUR HAND DRILL
|
| Ecodrill Hinge Cup Boring Jig
...plus other(s)
|
ECODRILL™ ALLOWS YOU TO USE YOUR CORDED HAND DRILL OR 14.4V, OR LARGER, CORDLESS DRILL TO MAKE CUPS FOR BLUM® HINGES:
HOUSES TWO 8MM AND ONE 35MM BORING BIT IN THE BLUM® BORING PATTERN. EACH BIT IS DRIVEN SEPARATELY AND RETRACTS AUTOMATICALLY. CLAMPS TO DOOR THICKNESSES UP TO 40MM (1-9/16"). COMES WITH PRE-INSTALLED DRILL BITS, TWO TORX® DRIVERS AND INSTRUCTIONS FOR USE.
ECOJIG™ IS USED FOR MOUNTING BLUM® PLATES: USE TO BORE 5MM HOLES FOR SYSTEM (EURO) SCREWS OR FOR EXPANDING DOWEL PLATES. HOLES ARE SPACED 32MM APART AND 37MM FROM THE CABINET FRONT. STOP COLLAR FOR 5MM DRILL BIT ( 136-466 - SOLD SEPARATELY) AND INSTRUCTIONS FOR USE INCLUDED. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM® TANDEM PLUS™ BLUMOTION DRAWER SYSTEM COMBINES SMOOTH RUNNING WITH SILENT CLOSING
|
| Tool Kit For Tandem Template
...plus other(s)
|
WITH JUST A LIGHT TOUCH, DRAWERS EQUIPPED WITH FULL EXTENSION BLUM® TANDEM PLUS™ BLUMOTION FULLY CONCEALED UNDERMOUNT SLIDES CLOSE SMOOTHLY AND SILENTLY EVEN WHEN THEY ARE FULLY LOADED:
CLOSING ACTION ENGAGES WHEN DRAWER IS 2" FROM CABINET FRONT TO SOFTLY AND QUIETLY CLOSE THE DRAWER. SLIDES EXCEED ANSI/BIFMA GRADE 1 REQUIREMENTS. FORCE GUIDED RIGHT SIDE: ‰1/16" COMPENSATING LEFT SIDE RUNNER. FOR DRAWERS 12" TO 30" LONG AND DRAWER BOX SIDES FROM 13MM TO 19MM (1/2" TO 3/4") THICK. REQUIRE ONLY THE STANDARD 33MM (1-5/16") NOTCH IN THE REAR OF THE DRAWER BOX. ADDITIONAL PARTS REQUIRED FOR INSTALLATION OF EACH PAIR OF SLIDES (SOLD SEPARATELY): ONE PAIR OF LOCKING DEVICES SUITED TO YOUR APPLICATION (OVERLAY - FOR DRAWERS OVER 4-3/4" WIDE WITH OVERLAY FRONTS, PV - FOR DRAWERS WITH INSET FRONTS, NARROW - FOR DRAWERS 3-3/4" TO 4-3/4" WIDE OR STRAIGHT - FOR DRAWERS OVER 4-3/4" WIDE - MOUNTING SCREWS DRIVE STRAIGHT INTO DRAWER BOX FRONT) AND ONE PAIR OF REAR MOUNTING BRACKETS (FACE FRAME APPLICATIONS ONLY). USE TANDEM BORING TEMPLATE TO PROPERLY ALIGN MOUNTING HOLES FOR FRONT LOCKS. TEMPLATE USE REQUIRES 2.5MM AND 6MM TWIST BITS (NOT INCLUDED). ACCESSORY TOOL KIT INCLUDES ONE 2.5MM DRILL BIT EXTENSION AND HEX KEY FOR ADJUSTMENT, ONE 6MM STOP COLLAR AND ONE P2 DRIVER BIT. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Accessories
|
KREG JIG® K3 MASTER SYSTEM IS PACKED WITH FEATURES
|
| Kreg Kjsc/d Depth Collar/hex Wrench
...plus other(s)
|
WITH A DRILL GUIDE BLOCK THAT IS NOW INTERCHANGEABLE BETWEEN BENCHTOP AND PORTABLE BASES, THE PATENTED KREG JIG® K3 MASTER SYSTEM PROVIDES THE FLEXIBILITY OF TWO POCKET JOINERY TOOLS IN ONE:
FIXED DRILL GUIDE SPACING PUTS POCKET HOLES EXACTLY WHERE YOU NEED THEM FOR NARROW TO THE WIDEST STOCK. 1/8" INCREMENTAL SETTINGS CAN BE APPLIED TO MATERIALS FROM 1/2" TO 1-1/2" THICK. DUST COLLECTION SHROUD MEANS NO MORE WOOD CHIPS ON YOUR WORKBENCH AND EXTENDED DRILL BIT LIFE. MATERIAL SUPPORT STOP LETS YOU CONSISTENTLY REPEAT HOLE SPACINGS. THE K3 MASTER SYSTEM INCLUDES PREMIUM FACE CLAMP, 3/8" HSS KJD STEP DRILL BIT, 6"-#2 DRIVER BIT, 3"-#2 DRIVER BIT, DEPTH COLLAR, 1/8" HEX WRENCH, SPS-C1 SCREWS, SML-F125 SCREWS, SML-C125 SCREWS, SML-C150 SCREWS, SML-C2 SCREWS AND SML-C250W SCREWS. ALSO COMES WITH 3-3/4"H X 18"W X 12-1/2"D RIGID CASE AND DETAILED INSTRUCTIONS. WEIGHS 8.85 LBS. LIFETIME WARRANTY ON HARDENED STEEL DRILL GUIDES. OPTIONAL SK03 SCREW KIT INCLUDES FIVE OF KREG'S MOST POPULAR SELF-TAPPING SCREW SIZES FOR POCKET-SCREW JOINERY IN A DURABLE EASY TO CARRY CASE. USA.
|
|
|
|
Bits Drill And Boring - Accessories
|
DEWALT® CAN HANDLE ALL OF YOUR DRILLING AND DRIVING NEEDS
|
| Dw2161 21-pc Screwdriving Set W/cs
...plus other(s)
|
DEWALT® DRILL AND DRIVER SETS ARE MADE USING SHOCK RESISTANT STEEL FOR MAXIMUM DURABILITY. DRILL BITS HAVE A BLACK OXIDE FINISH FOR GREATER WEAR RESISTANCE; DRIVERS FEATURE A GUIDE SLEEVE TO REDUCE WOBBLE:
DW2161 21 PIECE HIGH PERFORMANCE SCREWDRIVING BIT SET INCLUDES: #1, SIX #2 AND #3 PHILLIPS BIT TIPS; #6, #8 AND #10 SLOTTED BIT TIPS; #1, THREE #2 AND #3 SQUARE RECESS BIT TIPS; 1/4" AND 5/16" MAGNETIC NUTSETTERS, 2" MAGNETIC BIT TIP HOLDER, 2" #2 PHILLIPS POWER BIT; AND 2" #2 SQUARE RECESS POWER BIT - 14 OZ. SHIPPING WEIGHT. DW1163 13 PIECE DRILL BIT SET COMES WITH TWO 1/16", 5/64", TWO 3/32", 7/64", TWO 1/8", 9/64", 5/32", 3/16", 7/32" AND 1/4" DRILL BITS. 135° SPLIT POINT DESIGN MINIMIZES WALKING - 10 OZ. SHIPPING WEIGHT. DW2513 15 PIECE RAPID LOAD™ SET FITS ALL 3/8" AND 1/2" CORDED AND CORDLESS DRILLS AND ALLOWS YOU TO CHANGE ACCESSORIES WITHOUT RECHUCKING. CONTAINS RAPID LOAD™ HOLDER, 1/8" AND 1/4" HEX SHANK DRILL BITS, MAGNETIC DRIVE GUIDE, 2" #2 PHILLIPS SCREWDRIVER BIT, 2" #2 SQUARE BIT TIP, 1" #1 PHILLIPS BIT TIP, FOUR 1" #2 PHILLIPS BIT TIPS, 1" #8 SLOTTED BIT TIP, 1" #1 SQUARE BIT TIP AND TWO 1" #2 SQUARE BIT TIPS - 14 OZ. SHIPPING WEIGHT. DW1178 40 PIECE DRILLING/DRIVING SET INCLUDES ACCESSORIES FOR MULTIPLE APPLICATIONS: 3/16", 13/64", 7/32", 1/4", 15/64", 3/8", AND 1/2" BLACK OXIDE DRILL BITS; TWO 1" #1 PHILLIPS INSERT BIT TIPS; THREE 1" #2 PHILLIPS INSERT BIT TIPS; TWO 1" #3 PHILLIPS INSERT BIT TIPS; 2" #1 PHILLIPS POWER BIT; TWO 2" #2 PHILLIPS POWER BITS; TWO 1" #1 SQUARE INSERT BIT TIPS; TWO 1" #2 SQUARE INSERT BIT TIPS; 1" #15 AND #20 TORX® INSERT BIT TIPS; 2" #1 SQUARE POWER BIT; TWO 2" #2 SQUARE POWER BITS; TWO 1" #6 SLOTTED INSERT BIT TIPS; TWO 1" #8 SLOTTED INSERT BIT TIPS; 1" #10 SLOTTED INSERT BIT TIP; 2" #8 SLOTTED POWER BIT; TWO DRYWALL DIMPLERS; 1/4" AND 5/16" NUTDRIVERS; 1/4" AND 3/8" SOCKET ADAPTERS; AND 3/4" AND 1" WOOD BORING BITS - 2-1/8 LBS. SHIPPING WEIGHT. EACH SET INCLUDES A TOUGH CASE™ VINYL CONTAINER WITH SLIDING LOCK AND BIT RETENTION SYSTEM. IMPORTED.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM® AVENTOS HF BIFOLD LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SMOOTH, SILENT CLOSING FOR OVERHEAD CABINET DOORS
|
| Aventos Drilling Template
...plus other(s)
|
SPECIFICALLY DESIGNED FOR TOP-HINGED, BI-FOLD OVERHEAD CABINET DOORS, THE UNIQUE BLUM® AVENTOS HF BI-FOLD LIFT SYSTEM MAKES EVEN A HEAVY DOOR FEEL WEIGHTLESS. THE DOOR CAN BE OPENED EASILY OR LEFT AT ANY HEIGHT; RELEASE THE DOOR AND THE SOFT-CLOSING BLUMOTION MECHANISM LETS IT DOWN SMOOTHLY AND GENTLY:
SYSTEM WORKS WITH ALL COMMON DOOR WIDTHS AND HEIGHTS BY USING COMBINATIONS OF ONE, TWO OR THREE LIFT MECHANISMS AND ASSOCIATED TELESCOPIC ARMS. ASSEMBLES QUICKLY USING CLIP TECHNOLOGY - DOORS CAN LATER BE REMOVED AND REATTACHED WITHOUT TOOLS. SETTING PROPER TENSION FOR OPENING AND CLOSING POWER IS QUICK AND PRECISE. CABINET DOORS ADJUST IN ALL 3 DIMENSIONS. WORKS WITH WOOD OR ALUMINUM FRAME DOORS IN FACE FRAME OR FRAMELESS APPLICATIONS. USE 156-719 HARDWARE KIT FOR STANDARD WOOD DOORS OR WIDE ALUMINUM DOORS. ADD 156-722 BRACKET SET FOR FACE FRAME OR WIDE OVERLAY APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HF™ BROCHURE PRIOR TO STARTING INSTALLATION. REQUEST A COPY FROM YOUR SALES REPRESENTATIVE OR VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Bits Drill And Boring - Accessories
|
NO CLOG... NO BURN...JUST THE BEST ON THE PLANET
|
| Small Cs Slipstop Collar-std
...plus other(s)
|
"DURING A RECENT PROJECT USING A CLASSIC COUNTERSINK, I BECAME FRUSTRATED WITH THE ROUGH CUT, CLOGGING AND BURNING IN SOME NICE HICKORY. I SAID TO MYSELF, "THIS IS THE USA. WE CAN DO BETTER." WE DID! YOU WILL BE PLEASANTLY SURPRISED WITH THE PERFORMANCE OF THESE NEW CLEANSTOP™ COUNTERSINK BITS. I GUARANTEE IT!"
-JOHN WIRTH, JR., PRESIDENT OF WOODWORKER'S SUPPLY
IMPROVED DESIGN COUNTERSINKS HAVE CHIP CLEARING FLUTES THE ENTIRE LENGTH OF THE BODY, CREATING A CHANNEL TO ALLOW CHIPS TO CLEAR FROM EVEN THE DEEPEST COUNTERBORES. COUNTERSINK BODIES ARE HEAT TREATED TO R64C HARDNESS FOR LONG LIFE. FOUR SIZES OF COUNTERSINKS BORE PILOT HOLES FOR #6, #8, #10 AND #12 STRAIGHT SHANK WOOD SCREWS. PRODUCT DESCRIPTION NUMBERS SPECIFY WOODSCREW HOLE SIZES IN HARDWOOD, E.G. #6 MEANS IDEAL FOR #6 SCREW IN HARDWOOD, AND IT WILL WORK WELL FOR # 8 SCREW IN SOFTWOOD.(A CONVENIENT SIZE REFERENCE CHART IS INCLUDED IN THE SET.) COUNTERSINKS HAVE 1/4" HEX SHANKS WITH A QUICK RELEASE NOTCH ON THE #6, #8 AND #10 SIZES. THE #12 SIZE HAS A STRAIGHT HEX SHANK. NEW SLIPSTOP™ NON-MARRING COLLARS FEATURE A 'WINDOW' ON EACH SIDE THAT ALIGNS WITH THE CHIP CLEARING FLUTES TO PROVIDE EXTRA CLEARANCE TO REMOVE DRILLING WASTE. THE SET INCLUDES ALL FOUR SIZES OF CLEANSTOP™ COUNTERSINKS, A SMALL WINDOWED SLIPSTOP™ COLLAR FOR THE #6, #8 AND #10 SIZES, A LARGE WINDOWED SLIPSTOP™ COLLAR FOR THE #12 COUNTERSINK, A HEX WRENCH TO MOUNT THE SLIPSTOP™ COLLARS AND ADJUST THE DRILL BIT DEPTH AND A SIZE REFERENCE CHART. THE NEW STORAGE CASE FEATURES AN ATTRACTIVE BURL FINISH, RARE EARTH MAGNET CATCH AND A FITTED FOAM INTERIOR TO BETTER PROTECT THE COMPONENTS. U.S. PATENT #5,795,110. OTHER PATENTS PENDING STOP COLLARS MADE IN USA; COUNTERSINK BODIES IMPORTED.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM® CABINET PROFILE DRILLING TEMPLATE ACCURATELY LOCATES HARDWARE WITHOUT AN EXPENSIVE BORING MACHINE
|
| Cabinet Profile Drilling Jig
|
|
THE 1 METER LONG RAIL OF THE BLUM® CABINET PROFILE DRILLING TEMPLATE CLAMPS DIRECTLY TO THE CABINET SIDE. FOUR TEMPLATES CAN BE ADJUSTED ALONG THE LENGTH OF THE RAIL TO ACCURATELY LOCATE HOLES FOR TANDEM™ DRAWER SLIDES, AVENTOS™ LIFT SYSTEMS LOCATING PINS AND HINGE MOUNTING BASEPLATES. GUIDE CAN BE MOVED FROM LEFT TO RIGHT SIDE OF CABINET WITHOUT CHANGING SETUPS TO ASSURE UNIFORMITY IN BORING.
|
|
|
|
Bits Drill And Boring - Accessories
|
UPDATED BLUM® BORING TEMPLATE SIMPLIFIES MOUNTING PLATE INSTALLATION
|
| Mounting Plate Boring Template
|
|
DESIGNED FOR ACCURATE PLACEMENT OF MOUNTING HOLES FOR IN-LINE PLATES WITH 22MM SETBACK OR STANDARD WINGED HINGE MOUNTING PLATES REQUIRING 32MM SETBACK FROM THE CABINET FRONT. WORKS EQUALLY WELL FOR BORING MOUNTING HOLES FOR TIP-ONTM OR BLUMOTIONTM WINGED ADAPTER PLATES. SIMPLY HOOKS ON THE CABINET FACE TO ACCURATELY INDEX THE MOUNTING HOLES ON THE CABINET SIDE. CAN BE USED TO EASILY TRANSFER MEASUREMENTS FROM THE DOOR TO THE CABINET. USES 2.5MM TWIST BIT NOT INCLUDED) TO DRILL PILOT HOLES FOR MOUNTING SCREWS.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM UNIVERSAL INDIVIDUAL TEMPLATE MAKES CABINET HARDWARE SETUP SIMPLE AND ACCURATE
|
| Universal Individual Template
|
THE UNIVERSAL INDIVIDUAL TEMPLATE™ ALLOWS YOU TO USE YOUR CORDED OR CORDLESS DRILL TO ACCURATELY MARK AND BORE MOUNTING HOLES FOR A WIDE VARIETY OF COLOR=#FF9900>BLUM® CABINET HARDWARE.
EASILY ADJUSTS AND LOCKS TO GIVE PROPER SETBACK FOR AVENTOS ™ LOCATING PINS, TANDEM™ AND TANDEMBOX™ RUNNERS, HINGE MOUNTING PLATES AND BLUMOTION™ AND TIP-ON™ ADAPTER PLATES. SET INCLUDES UNIVERSAL INDIVIDUAL TEMPLATE,2.5MM AND 5MM STOP COLLARS FOR TWIST BITS (BITS NOT INCLUDED). AUSTRIA
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM® BLUMOTION™ AND TIP-ON FOR DOORS™ BORING JIG SIMPLIFIES INSTALLATION
|
| Blumotion/doors And Tip-on Boring Jig
|
THIS BORING JIG WORKS WITH EITHER THE BLUMOTION™ FOR DOORS CYLINDERS OR THE TIP-ON FOR DOORS™ CYLINDERS. ACCURATELY LOCATES BORES FOR THE INSTALLATION OF THESE DEVICES DIRECTLY IN CABINET SIDES. REQUIRES A STANDARD JOBBER LENGTH 10MM DIAMETER TWIST BIT.(ORDER SEPARATELY.) AUSTRIA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
10MM TWIST BIT R40537.
|
|
|
|
Bits Drill And Boring - Accessories
|
STOP COLLARS KEEP YOU FROM DRILLING TOO DEEP
|
| 4 Large Depth Stops
...plus other(s)
|
BLACK OXIDE STEEL STOP COLLARS USE HEX SCREWS (WRENCHES INCLUDED) THAT TIGHTEN THE COLLAR AROUND THE BIT, RATHER THAN LOCKING INTO THE FLUTES, SO THEY ARE LESS LIKELY TO LOOSEN OR DAMAGE THE FLUTES:
SEVEN-PIECE STANDARD SET HAS COLLARS TO FIT 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" AND 1/2" DRILL BITS. IMPORTED. FOUR-PIECE LARGE SET INCLUDES 5/8", 3/4", 7/8" AND 1" BIT COLLARS. USA.
|
|
|
|
Bits Drill And Boring - Accessories
|
QUICKLY ADD 3-3/4" TO YOUR 3/8" SHANK DRILL BIT
|
| Bit Extender
|
HOW OFTEN HAVE YOU NEEDED TO DRILL A HOLE DEEPER THAN YOUR DRILL BIT WOULD GO OR DRILL IN A HARD TO REACH AREA, BUT YOUR BIT WASN'T LONG ENOUGH? THE WOODTEK® BIT EXTENDER SOLVES THESE PROBLEMS BY INCREASING DRILL BIT LENGTH A FULL 3-3/4":
YOUR 3/8" DIA. SHANK DRILL BIT FASTENS INTO BIT EXTENDER USING FOUR HEX SCREWS (INCLUDED). NEXT, TIGHTEN THE BIT EXTENDER SHANK INTO YOUR 3/8" OR LARGER DRILL CHUCK AND BEGIN DRILLING. ALL STEEL - 5" O.A.L. WITH 5/8" OUTSIDE DIAMETER. IMPORTED.
|
|
|
|
Bits Drill And Boring - Accessories
|
ECONOMICAL, ACCURATE SEVEN PIECE BRADPOINT DRILL BIT SET
|
| 7pc Stop Collar Set
...plus other(s)
|
SURPRISINGLY HIGH QUALITY FOR THE PRICE - THE OUTSIDE SPURS OF THIS SEVEN PIECE BRADPOINT DRILL BIT SET CUT CHIP-FREE HOLES AND KEEP THE BIT ON TRACK IN TWISTED GRAIN:
INCLUDES 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" AND 1/2" BITS, 2-3/4" TO 6" LONG. BITS OVER 3/8" DIAMETER HAVE SHANKS TURNED DOWN TO 3/8". ADD THE 202-220 7-PC STOP COLLAR SET FOR PRECISE DEPTH CONTROL. INDIVIDUAL 7/8" DIAMETER BITS WITH 3/8" REDUCED SHANK ARE LIMITED TO QUANTITY ON HAND IMPORTED.
|
|
|
|
Bits Drill And Boring - Accessories
|
LINE BORING MACHINE CAN BE POWERED BY ALMOST ANY 3/8" ELECTRIC DRILL
|
| 1/4" X 57mm Lh Bradpnt Boring Bit
...plus other(s)
|
COMPACT, PORTABLE AND SUITED TO SHOP OR FIELD APPLICATIONS, THE EURO® BORE-A-LINE FIXTURE LETS YOU DRILL THREE HOLES AT A TIME ON 37MM CENTERS (SETBACK CAN BE ADJUSTED FOR 32MM CENTERS):
AUTOMATIC POSITIONING OF FIRST HOLE ELEVATION - AUTOMATIC BORING DEPTH STOP. NON-SKID BASE PREVENTS WORK PIECE DAMAGE AND HELPS KEEP FIXTURE FROM MOVING WHILE YOU'RE DRILLING. BASE AND BRIDGE ARE MACHINED HEAVY DUTY PVC, BEARINGS ARE BRASS AND BRONZE AND SHAFT IS MACHINED STEEL. 6-1/2"H X 6-1/4" WIDE X 4-3/4"D, WEIGHS 2-3/4 LBS. INSTRUCTIONS INCLUDED - 2 LH AND 1 RH 5MM DIA. OR 1/4" DIA. X 57MM LONG BORING BITS REQUIRED (NOT INCLUDED). USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Bits Drill And Boring - Accessories
|
PATENTED SLIPSTOPTM COLLARS WON'T MAR OR BURN YOUR WORKPIECE...THEY'RE SIMPLE TO USE AND WORK GREAT!
|
| 1/8" Id Slipstop Collar
...plus other(s)
|
|
SLIPSTOPTM ATTACHES TO DRILL BITS WITH A SET SCREW JUST LIKE CONVENTIONAL STOP COLLARS, BUT THAT'S WHERE THE SIMILARITY ENDS: UNDER THE SLIPSTOP POLYMER BOOT IS A SPECIAL LOW FRICTION POLYMER DISC BEARING THAT ALLOWS THE BOOT TO ROTATE FREELY WHEN IT CONTACTS THE STOCK (U.S. PATENT 5,795,110). COLLAR IS STAINLESS STEEL TO PREVENT RUSTING. WITH SLIPSTOPS, YOU CAN STOP WORRYING ABOUT BURNING OR BURNISHING YOUR WORKPIECE. AVAILABLE IN ENGLISH AND METRIC SIZES; ORDER BY THE SET (908-298 OR 908-410) AND SAVE! USA.
|
|
|
|
Advanced Search Tools
Browse
to see Sub Categories)
