|
|
|
Bits Router/joinery/dovetail
|
FREUD® BUTTERFLY SPLINE BIT
|
| 1-1/8" Butterfly Spline Bit
|
|
THIS BIT PRODUCES A STRONG, ATTRACTIVE METHOD OF JOINING WOOD. USE A 14-DEGREE DOVETAIL BIT TO PRODUCE THE MATING GROOVES. CUTS ALL COMPOSITION MATERIALS, PLYWOODS, HARDWOODS, AND SOFTWOODS. USE ON CNC AND OTHER AUTOMATIC ROUTERS AS WELL AS HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/dovetail
|
BOSCH DOVETAIL ROUTER BITS
|
| 85240 1/2 Dovetail Bit Ct
|
CARBIDE TIPPED BOSCH 85240M DOVETAIL ROUTER BITS PRODUCE SMOOTH, INTRICATE DOVETAIL JOINTS:
CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AND CNC AND OTHER AUTOMATIC ROUTERS. 1/2" FLUTE LENGTH; 1/4" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
CUT PRECISE JOINTS "RIGHT OUT OF THE BOX" USING PORTER-CABLE® SERIES 4200 DOVETAIL JIGS
|
| 13/32" X 1" Straight Bit, 1/2" Shank
...plus other(s)
|
THERE'S NO ASSEMBLY REQUIRED WITH THESE REDESIGNED PORTER-CABLE® DOVETAIL JIGS - TAKE ONE OUT OF THE BOX, CLAMP IT ONTO YOUR BENCH, PLUG IN YOUR ROUTER AND START MAKING DOVETAILS - 12" WIDE X 1/4" TO 1-1/8" THICK CAPACITIES:
136-262 MODEL 4210 - DOVETAIL JIG CUTS HALF BLIND, HALF BLIND WITH LIPPED FRONT AND DOVETAIL DADOES. INCLUDES 1/2" SHANK, 17/32" 7° CARBIDE TIPPED DOVETAIL ROUTER BIT, HALF BLIND AND DADO TEMPLATE, LOCK NUT AND TEMPLATE GUIDE. 136-265 MODEL 4212 - DELUXE DOVETAIL JIG HANDLES THROUGH DOVETAIL, BOX JOINT, HALF BLIND, HALF BLIND WITH LAPPED FRONT AND DOVETAIL DADOES. COMES WITH 1/2" SHANK, 17/32" 7° CARBIDE TIPPED DOVETAIL ROUTER BIT, 13/32" CARBIDE TIPPED STRAIGHT ROUTER BIT, HALF BLIND AND DADO TEMPLATE, THROUGH AND BOX TEMPLATE, TWO LOCK NUTS AND TWO TEMPLATE GUIDES. T-HANDLE HEX WRENCH AND INSTRUCTIONS ALSO INCLUDED. CNC MACHINED, SOLID ALUMINUM TEMPLATES HAVE PATENTED ALIGNMENT LINES FOR EASY POSITIONING - VERTICAL AND HORIZONTAL CAM LOCKING BARS HOLD WOOD IN PLACE. ROUTER BIT HEIGHT STOP SETS CUT DEPTH. OFFSET POSITIONING GUIDES ALLOW ONE PASS CUTTING OF HALF BLIND DOVETAILS. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
KLICK™ AND S-KLICK™ BLIND FASTENERS
|
| 1/4" Shank Cust Dovetail Klick
...plus other(s)
|
|
SKLICK™ FASTENERS ARE DESIGNED FOR QUICK AND EASY "SNAP" MOUNTING OF MOLDINGS ONTO VARIOUS SURFACES:
|
|
|
|
Bits Router/joinery/dovetail
|
E-Z PRO™ DOVETAIL JIG SIMPLIFIES ROUTER CUT DOVETAILS
|
| 1/2" X 14 Deg Hss Dovetail Bit, 1/4" Sha
...plus other(s)
|
|
THE GENERAL® E-Z PRO™ DOVETAIL JIG CAN MAKE THROUGH OR HALF-BLIND DOVETAILS USING HAND HELD OR TABLE MOUNTED ROUTERS. SELF-ALIGNING DESIGN ENSURES THAT BOTH ENDS OF THE DOVETAIL JOINT WILL MATCH UP EVENLY EVERY TIME. JIG IS FREE STANDING - DOES NOT NEED TO BE FASTENED TO WORKBENCH. LETS YOU TAKE THE JIG TO THE WORK PIECE. ACCOMMODATES BOARDS OF ANY WIDTH AND 1/2" TO 5/8" THICK. CAN BE ADJUSTED TO ALLOW FOR LOOSE OT TIGHT-FITTING JOINTS. STURDY MACHINED ALUMINUM CONSTRUCTION, WITH NO ASSEMBLY REQUIRED. INCLUDES ONE 14 DEGREE 1/2" TOP BEARING DOVETAIL ROUTER BIT WITH 1/4" SHANK NO TEMPLATE GUIDES ARE REQUIRED. JIG CAN ALSO BE USED TO CREATE BOX JOINTS. BOX JOINT BIT IS NOT INCLUDED.
|
|
|
|
Bits Router/joinery/dovetail
|
USE A PLUNGE ROUTER TO MAKE MORTISE AND TENON JOINTS
|
| 1/4" X 3" Hss Up Cut Spiral Router Bit
...plus other(s)
|
|
GENERAL E-Z PRO™ MORTISE & TENON JIG FOR PLUNGE ROUTERS. ACCOMMODATES STOCK FROM 1/2" TO 1-1/2" THICK. MAKE TENONS FROM 1" TO 3" WIDE. MAXIMUM TENON LENGTH IS 1-7/8". JIG USES SPIRAL BIT AND BUSHING SYSTEM TO MAKE 1/4", 3/8" AND 1/2" THICK TENONS. SERRATED CENTERING SYSTEM PROVIDES EXACT POSITION FOR 1/2", 3/4", 1", 1-1/4" AND 1-1/2" NET THICKNESS STOCK. BUSHING FITS IN A PORTER-CABLE® STYLE 1-1/8" HOLE SUB BASE. INCLUDES: JIG, HSS SPIRAL ROUTER BIT, BUSHING & 3 SLEEVES, BUSHING WRENCH AND MANUAL. ONE YEAR MANUFACTURER'S MATERIALS & WORKMANSHIP WARRANTY. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
FREUD® DOVETAIL ROUTER BITS
|
| 5/16" Dovetail-9 Degree-1/4"shk
...plus other(s)
|
CARBIDE TIPPED FREUD® DOVETAIL ROUTER BITS PROVIDE SMOOTH, INTRICATE DOVETAIL JOINTS AND ARE COMPATIBLE WITH MANY POPULAR DOVETAILING JIGS:
RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/joinery/dovetail
|
WOODTEK DOVETAIL ROUTER BIT
|
| 42521 3/8"dia.dovetail Bit
...plus other(s)
|
WOODTEK® CARBIDE TIPPED DOVETAIL ROUTER BITS PRODUCE SMOOTH, INTRICATE DOVETAIL JOINTS:
CUT ALL SOFT WOOD, HARDWOOD, PLYWOOD AND COMPOSITION MATERIALS. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS. 1/4" AND 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/dovetail
|
THE LEIGH 24" DOVETAIL JIG IS THE CORNERSTONE OF MULTI-FACETED JOINERY
|
| 8 Deg X 1/2" Dovetail Bit, 8mm Shank
...plus other(s)
|
COMBINE THE LEIGH D4R-24 DOVETAIL JIG WITH YOUR FAVORITE 1/2" OR 8MM COLLET ROUTER AND YOU CAN EASILY PRODUCE LARGE AND SMALL THROUGH, ANGLED THROUGH, HALF BLIND, RABBETED HALF BLIND, END-ON-END AND SLIDING DOVETAIL JOINTS:
JIG CAN ACCOMMODATE BOARDS UP TO 24" WIDE X 1-1/2" THICK WITH INFINITE PIN, TAIL WIDTH AND SPACING ADJUSTMENTS FOR A CLASSIC HAND CUT LOOK. INCLUDES 1/2" DIA. 8° DOVETAIL, 5/16" DIA. STRAIGHT AND 1/2" DIA. 14° DOVETAIL BITS (8MM SHANKS), 7/16" O.D. UNIVERSAL GUIDE BUSHING, 1/2"-TO-8MM COLLET REDUCER, USER GUIDE, INSTRUCTIONAL DVD, CAM-ACTION SPEED CLAMPS, CROSSCUT/SLIDING DOVETAIL GUIDE BAR, SQUARE DRIVER AND ASSEMBLY WRENCH. REQUIRES 7/16" AND 5/8" BUSHINGS (NOT INCLUDED).
M2 LEIGH MULTIPLE MORTISE AND TENON ATTACHMENT ATTACHES DIRECTLY TO THE D4R-24 AND REPLACES DOVETAILING FINGERS SO YOU CAN CUT PERFECT MULTIPLE MORTISE AND TENON JOINTS FROM 5/16" X 5/8" TO 1-1/2" X 2-1/2": CUSTOMIZE THE FIT AND DESIGN TO SUIT YOUR REQUIREMENTS AND SELECT FROM THREE CORNER RADII (5/32", 1/4" OR SQUARE (WITH CHISELING). 1/2" HSS SPIRAL UPCUT BIT AND INSTRUCTIONS INCLUDED.
ISOLOC TEMPLATES ARE PRECISION CNC-MACHINED ALUMINUM ALLOY AND COME WITH AN INSTRUCTION MANUAL AND PATENTED 5-PIECE VGS VARIABLE TEMPLATE GUIDEBUSH SYSTEM WITH NOMINAL 1/2" OD GUIDE.
AC-D24 ROUTER BIT AND VACUUM ATTACHMENT ACCESSORY KIT AND THE VRS-D24 VACUUM AND ROUTER SUPPORT PROVIDE CONVENIENCE AND VERSATILITY.
FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Bits Router/joinery/dovetail
|
WOODTEK TOP BEARING ROUTER BIT FOR JOINERY OR ARCHITECTURAL DETAIL
|
| 1/2"dovetail Pattern Bit
...plus other(s)
|
TOP BEARINGS LET YOU USE WOODTEK® CARBIDE-TIPPED PATTERN MAKING ROUTER BITS WITH TEMPLATES PLACED ON TOP OF THE WORKPIECE. YOU CAN SIGHT YOUR CUT LINE CLEARLY AND WORK WITH MORE CONTROL - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/joinery/keller Jig Bits
|
DOVETAIL YOUR NEXT WOODWORKING PROJECTS IN MINUTES WITH KELLER 15" DOVETAIL JIG SYSTEMS
|
| Replacement Dovetail Bit
...plus other(s)
|
WHETHER YOU ARE A PROFESSIONAL WOODWORKER OR A WEEKEND HOBBYIST, YOU'LL FIND THAT KELLER 15" DOVETAIL JIG SYSTEMS ARE EASY AND EFFICIENT AND PROVIDE PERFECT RESULTS:
934-385 - MODEL 1500 JOURNEYMAN COMBINES TAIL AND PIN TEMPLATES IN ONE, BACK TO BACK, 15" LONG PHENOLIC TEMPLATE. ROUT DOVETAILS IN ANY 1/8" TO 3/4" THICK STOCK. ECONOMICAL CHOICE FOR BEGINNER AND HOBBYIST SMALL TO MID-SIZED PROJECTS.
951-597 - USE THE MODEL 1601 PRO SERIES TO CUT FIXED OR VARIABLE WIDTH DOVETAILS, EVEN FOR ANGLED OR CURVED JOINTS. TWO, 16" LONG ALUMINUM TEMPLATES WORK ON ANY STOCK FROM 1/8" TO 3/4" THICK AND ARE GUARANTEED BY THE MANUFACTURER FOR 20 YEARS. DESIGNED FOR SMALL TO MEDIUM SIZE WOODWORKING PROJECTS.
BOTH JIGS INCLUDE ONE CARBIDE TIPPED 7/16" X 7°, 1/4" SHANK DOVETAIL BIT AND ONE CARBIDE TIPPED 5/8", 1/4" SHANK STRAIGHT BIT, BOTH WITH BALL BEARING GUIDES (NO BUSHINGS REQUIRED) AND COMPLETE INSTRUCTIONS. BOTH REQUIRE A SIMPLE, WOODEN MOUNTING BLOCK (NOT INCLUDED).
|
|
|
|
Bits Router/joinery/leigh Jig Bits
|
WOODTEK STRAIGHT ROUTER BIT FOR LEIGH DOVETAIL JIGS.
|
| #140 Straight Bit F/leigh
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED STRAIGHT ROUTER BITS ARE DESIGNED TO WORK WITH THE EXTREMELY VERSATILE LEIGH DOVETAIL JIG™ AS WELL AS OTHERS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/joinery/leigh Jig Bits
|
WOODTEK DOVETAIL BIT FOR LEIGH JIG
|
| #50 Dovetail Bit F/leigh
...plus other(s)
|
WOODTEK® CARBIDE-TIPPED DOVETAIL ROUTER BITS ARE DESIGNED TO WORK WITH THE EXTREMELY VERSATILE LEIGH DOVETAIL JIG™ AS WELL AS OTHERS - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
|
|
|
|
Bits Router/sets/bit Assortments
|
FREUD® 26 PIECE ARTISAN BIT SET THE BEST FOR THE PROFESSIONAL AND SERIOUS WOODWORKER
|
| 92-100 26 Piece Router Bit Set
|
TRULY THE BEST CARBIDE TIPPED ROUTER BITS FOR THE PROFESSIONAL AND SERIOUS WOODWORKER, THE FREUD® #92-100 26 PIECE ARTISAN SET OFFERS JUST ABOUT EVERY ROUTER BIT ANYONE WILL NEED:
1/8", TWO 1/4" AND 3/4" DOUBLE FLUTE STRAIGHT (3 SOLID CARBIDE), 1/2" MORTISING, 1/4" AND 3/8" ROUND NOSE (1 SOLID CARBIDE), 1/4" X 90° AND 1/2" X 90° "V" GROOVE (1 SOLID CARBIDE), 1/2" X 14° DOVETAIL, 1/4" PANEL PILOT (SOLID CARBIDE), 7/8" AND 1-1/2" COVE, 1-1/4" RABBETING, 1" AND 1-1/4" ROUNDOVER, 1" AND 1-1/4" BEADING, 1-1/16" AND 1-3/8" ROMAN OGEE, 1-3/4" X 45° CHAMFER, 3/8" AND TWO 1/2" BEARING FLUSH TRIM, 1/4" FLUSH TRIM (SOLID CARBIDE) AND 1/4" BEVEL TRIM (SOLID CARBIDE) - ALL CONTAINED IN A WOODEN STORAGE BOX. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. PILOT BEARINGS ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/bit Assortments
|
FREUD® 15 PIECE ADVANCED ROUTER BIT SET
|
| 90-100 15pc Ind.router Bit Set
|
A GREAT VARIETY OF HIGHLY USEFUL ROUTER BITS IN ONE PACKAGE, THE CARBIDE TIPPED FREUD® #90-100 15 PIECE ADVANCED BIT SET WILL LET YOU GROOVE, FLUSH TRIM, CHAMFER AND DOVETAIL:
1/4" AND 3/4" DOUBLE FLUTE STRAIGHT (1 SOLID CARBIDE), 1/2" MORTISING, 1/4" ROUND NOSE (SOLID CARBIDE), 1/2" X 90° "V" GROOVE, 1/2" X 14° DOVETAIL, 1/4" PANEL PILOT, 1-3/8" COVE, 1-1/4" RABBETING, 1-1/4" ROUNDOVER, 1-1/16" ROMAN OGEE, 1-3/4" X 45° CHAMFER, 1/2" BEARING FLUSH TRIM, 1/2" FLUSH TRIM (SOLID CARBIDE) AND 1/4" BEVEL TRIM (SOLID CARBIDE) BITS INCLUDED. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. PILOT BEARINGS ENSURES GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" SHANKS; ATTRACTIVE WOODEN STORAGE CASE INCLUDED. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/bit Assortments
|
FREUD® 13 PIECE SUPER ROUTER BIT SET
|
| 91-100 13 Pc Router Bit Set 1/2sh
|
THE CARBIDE TIPPED FREUD® #91-100 13 PIECE SUPER ROUTER BIT SET OFFERS A MIX OF WOODWORKERS FAVORITE BITS; ATTRACTIVE WOODEN STORAGE BOX INCLUDED:
INCLUDES 1/4", 1/2", 3/4" DOUBLE FLUTE STRAIGHT, 1/2" MORTISING, 1/4" ROUND NOSE, 3/4" "V" GROOVE, 1/2" X 14° DOVETAIL, 1-1/2" COVE, 1-1/4" RABBETING, 1-1/4" ROUNDOVER, 1-3/8" ROMAN OGEE, 1-3/4" X 45° CHAMFER AND 1/2" FLUSH TRIM W/BEARING ROUTER BITS. PILOT BEARINGS ENSURE GREATER CONTROL AND ACCURACY. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON PORTABLE AND TABLE MOUNTED PORTABLE ROUTERS. 1/2" SHANKS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/bit Assortments
|
FREUD® 9 PIECE BASIC ROUTER BIT SET IDEAL FOR BEGINNING WOODWORKERS
|
| 9 Pc Router Bit Set
|
THE CARBIDE TIPPED FREUD® #88-100 9 PIECE BASIC ROUTER BIT SET INCLUDES A VARIETY OF BITS TO LET YOU EXPERIENCE SEVERAL ROUTING FUNCTIONS:
1/4" AND 3/8" DOUBLE FLUTE STRAIGHT, 1/2" MORTISING, 1/2" X 14° DOVETAIL, 1-1/4" RABBETING, 1" ROUND OVER, 1-1/16" ROMAN OGEE, 3/8" FLUSH TRIM AND 1/4" PANEL PILOT BITS. CARBIDE TIPPED; 1/4" DOUBLE FLUTE STRAIGHT AND PANEL PILOT BITS ARE SOLID CARBIDE. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. PILOT BEARINGS ON SELECTED BITS ENSURE GREATER CONTROL AND ACCURACY. RED, PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON HAND HELD AND TABLE MOUNTED PORTABLE ROUTERS. 1/4" SHANKS; WOODEN STORAGE CASE. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/bit Assortments
|
WOODTEK 9-PIECE ROUTER BIT SET
|
| 9pc Router Bit Set
|
THE WOODTEK® CARBIDE-TIPPED NINE PIECE ROUTER BIT SET PROVIDES A FULL RANGE OF BITS FOR VIRTUALLY ALL ACTIVITIES - USE WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS AS WELL AS CNC AND OTHER AUTOMATIC ROUTERS:
INCLUDES 1/4" & 3/8" STRAIGHT, 1/2" MORTISING, 1/2" X 14° DOVETAIL, 3/8" RABBETING, 1/4" CORNER ROUND, 5/32" ROMAN OGEE, 3/8" FLUSH TRIM AND 1/4" HOLE AND FLUSH TRIM BITS. ALL PIECES FIT TIGHTLY INTO A LATCHING WOODEN BOX FOR SAFE, EASY STORAGE OR TRANSPORT. RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/bit Assortments
|
WOODTEK 24 PIECE ROUTER BIT SET
|
| 24pc Router Bit Set, 1/4" Shank
...plus other(s)
|
THE WOODTEK® CARBIDE-TIPPED 24-PIECE ROUTER BIT SET CAN BE USED WITH HAND-HELD AND TABLE-MOUNTED PORTABLE ROUTERS:
1/4", 3/8", 1/2" AND 3/4" STRAIGHT BITS; 1/2" HINGE MORTISING BIT; 1/2" FLUSH TRIM BIT; 1/4" PILOT PANEL BIT; 1/2" X 7° BEVEL TRIM BIT; 1/2" X 22° BEVEL & FLUSH TRIM BIT; 1/4" AND 1/2" ROUND NOSE BITS; 1/2" V-GROOVE BIT; 3/8" X 9° DOVETAIL BIT; 1/2" X 14° DOVETAIL BIT; 1/8", 3/16", 1/4" AND 1/2" CORNER ROUND BITS; 1/4" SLOT CUTTER; 45° CHAMFER BIT; 1/2" AND 3/8" COVE BITS; 5/32" ROMAN OGEE BIT AND 1/2" FLUSH TRIM BIT INCLUDES FITTED, LATCHING WOODEN CASE. RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. POSITIVE SHEAR ANGLE PLACES LESS DEMAND UPON YOUR ROUTING EQUIPMENT. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. 1/4" AND 1/2" SHANKS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/chamfer & Bevel Sets
|
PAIR UP YOUR ROUTER WITH DURABLE WOODTEK® ECONOMY ROUTER BIT SETS
|
| 12 Pc Economy Bit Set 1/2' Shanks
...plus other(s)
|
EXPAND YOUR COLLECTION OF ROUTER BITS BY A LITTLE OR A LOT WITH QUALITY WOODTEK® ECONOMY ROUTER BIT SETS - IDEAL FOR MAKING SIGNS, CREATING STRONG JOINTS OR PROVIDING FINE EDGES FOR MOLDING, FURNITURE OR DRAWER FRONTS (CARBIDE-TIPPED, UNLESS INDICATED (HSS) - HIGH SPEED STEEL):
122-402 - 12-PIECE SET INCLUDES 1/4" X 11/16" STRAIGHT, 1/2" X 25/32" STRAIGHT, 3/4" X 25/32" STRAIGHT, 1/2" X 1/2" FLUSH TRIM W/BEARING, 1/2" X 1/2" DOVETAIL, 90° 1/2" X 1/2" V-GROOVE, 1/2" X 3/8" CORE BOX, 1/4" X 17/32" ROUNDOVER W/BEARING, 3/8" X 21/32" ROUNDOVER W/BEARING, 1/4" X 1/2" COVE W/BEARING, 45° 1-1/4" X 21/32" CHAMFER W/BEARING AND 5/32" X 1/2" ROMAN OGEE W/BEARING BITS - 1/2" SHANKS.
122-405 - 24-PIECE SET HAS SAME BITS AS 12-PIECE SET (122-399) AS WELL AS 3/8" X 7/16" KEYHOLE, 3/8" X 25/32" STRAIGHT, 3/8" X 3/8" DOVETAIL, 1/4" X 3/8" CORE BOX, 1/8" X 7/16" ROUNDOVER W/BEARING, 1/4" X 9/16" OVOLO, 1/2" X 17/32" HINGE MORTISING, 7/8" X 17/32" RABBETING W/BEARING, 3/8" X 9/16" COVE W/BEARING, 1/4" X 1" PANEL PILOT, 1/2" X 3/4" ROUNDOVER W/BEARING AND 7/8" X 29/32" HALF ROUND - 1/4" SHANKS. 122-411 - SAME AS 122-405, BUT WITH 1/2" SHANKS.
123-071 - 30-PIECE SET CONTAINS 1/4", 5/16", 3/8", 1/2" AND 3/4" STRAIGHT; 3/8" X 9°, 1/2" X 14° AND 5/8" X 14° DOVETAIL; 1/8", 1/4" AND 3/16" COVE BOX; 1-3/16" CHAMFER; 17/32" V-GROOVE; 3/8" PANEL PILOT; 3/8" AND 1/2" FLUSH TRIM; 1/4" AND 3/8" SLOT; 13/32" BEVEL TRIM (HSS); 1/8", 3/16", 3/8", 1/4", 5/16" AND 1/2" ROUNDOVER; 5/32" AND 1/4" ROMAN OGEE; AND 1/4", 3/8" AND 1/2" COVE BITS - 1/4" SHANKS. 123-074 - SAME AS 123-071, BUT WITH 1/2" SHANKS.
123-053 - FOR VARIETY AND VERSATILITY, THE 66-PIECE SET (SHOWN) OFFERS JUST ABOUT ANY ROUTER BIT YOU MIGHT NEED 1/4", 3/8", TWO 1/2", TWO 5/8" AND TWO 3/4" STRAIGHT; 1/8", 1/4", 3/8", 1/2" STRAIGHT (HSS); 3/8" X 9°, 1/2" X 9° AND 1/2" X 14° DOVETAIL; 3/16", 1/4", 5/16" AND 3/8" COVE BOX; 5/8", 3/4", 1", 1-3/16" X 45° AND 1-7/16" X 45° CHAMFER; 3/8", 1/2", 3/4" AND 9/16" (HSS) V-GROOVE; 1/4" AND 3/8" PANEL PILOT; 3/8" AND TWO 1/2" FLUSH TRIM; 1/4" AND 1/2" SLOT; 1/2" AND 5/8" MORTISING; 1/4" BEADING; 1/8" AND 1/4" HALF ROUND; 1/8", 3/16", 1/4", 5/16", 3/8" AND 1/2" ROUNDOVER; 3/16" AND THREE 5/32" ROMAN OGEE; 1/4", 3/8" AND 1/2" COVE; 1/4" AND 3/8" CLASSICAL COVE; 3/16", 5/32" AND TWO 1/4" CURVED LINE; 1/2" MORTISING; 1/4" AND 3/8" PANEL PILOT; 3/16" AND 1/4" OPEN AND CARVING; AND 3/8" AND 1/2" KEYHOLE - 1/4" SHANKS. 123-056 - SAME AS 123-053, BUT WITH 1/2" SHANKS.
ANTI-KICKBACK DESIGN. PRECISION SHARPENED WITH MACHINED BODIES. ANTI-STICK COATING SPEEDS CUTTING AND PREVENTS RESIN BUILDUP. ALLEN WRENCH, BEARINGS TO CONVERT ROUNDOVER BITS INTO BEADING BITS AND WOODEN STORAGE BOX INCLUDED. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
WOODTEK® ROUTER BIT PILOT BEARING TUNE-UP KIT - 891-952.
|
|
|
|
Bits Router/sets/dovetail Bit Sets
|
FREUD® ROUTER BIT SETS FOR THE INCRA JIG®
|
| 96-102 8 Pc Router Bit Set 1/2" Shank
...plus other(s)
|
GET THE MOST FROM YOUR INCRA JIG® BY HAVING THE RIGHT FREUD® CARBIDE TIPPED ROUTER BIT SET:
INCLUDES 1/4", 5/16", 3/8" X 9°, 1/2", 3/8" X 7° AND 3/4" DOVETAIL BITS PLUS 1/4" AND 3/8" SOLID CARBIDE STRAIGHT BITS IN A FITTED WOODEN STORAGE CASE. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS EQUIPPED WITH INCRA JIG® OR OTHER JOINT MAKING JIGS OR FENCE SYSTEMS. 1/4" OR 1/2" SHANKS; BOTH SETS PRODUCE IDENTICAL PROFILES. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Bits Router/sets/dovetail Bit Sets
|
CREATE DOVETAIL AND BOX JOINTS USING FREUD® ROUTER BIT SETS EXCLUSIVELY DESIGNED FOR INCRA JIG®
|
| 96-100 8 Pc Router Bit Set 1/4" Shank
...plus other(s)
|
GET THE MOST FROM YOUR INCRA JIG® BY SIMPLY FOLLOWING YOUR MANUAL TO SELECT THE CORRECT ROUTER BIT NUMBER FOR THE JOINT YOU WANT TO CREATE. CARBIDE TIPPED FREUD® #96-100 (1/4" SHANK) AND #99-102 (1/2" SHANK) ROUTER BIT SETS INCLUDE:
1/4" X 5/16", 5/16" X 3/8", 3/8" X 3/8", 1/2" X 1/2", 5/8" X 7/8" AND 3/4" X 7/8" DOVETAIL BITS PLUS 1/4" X 3/4" AND 3/8" X 1" STRAIGHT BITS IN A FITTED WOODEN STORAGE CASE; BOTH SETS PRODUCE IDENTICAL PROFILES. ANTI-KICKBACK DESIGN PREVENTS OVERFEED, TEAROUT AND CHATTER. RED, NON-STICK PERMA-SHIELD™ COATING MEANS LESS FRICTION AND LESS RESIN ADHESION. CUT ALL COMPOSITION MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD. USE ON TABLE MOUNTED PORTABLE ROUTERS EQUIPPED WITH INCRA JIG® OR OTHER JOINT MAKING JIGS OR FENCE SYSTEMS. ONE YEAR MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Books
|
THE COMPLETE ILLUSTRATED GUIDE TO JOINERY
|
| Illustrated Guide To Joinery
|
A COMPREHENSIVE, STEP-BY-STEP PICTORIAL REFERENCE, THE COMPLETE ILLUSTRATED GUIDE TO JOINERY© CONTAINS INFORMATION ABOUT MAKING:
DOVETAILS AND FINGER JOINTS. MORTISES AND TENONS. RABBETS, DADOES AND GROVES. SCARF JOINTS. LAP AND BRIDLE JOINTS. SUITED TO THE BEGINNER AND THE PRO.
HARDCOVER. 390 PAGES, 1,300 COLOR PHOTOS AND 100 DRAWINGS.
|
|
|
|
Books
|
FINE WOODWORKING ON JOINERY, SHAPING & MILLING
|
| Joinery, Shaping & Milling
|
|
HERE YOU'LL DISCOVER STRATEGIES AND TRICKS FOR MAKING SIMPLE AND COMPLEX SHAPES OUT OF WOOD. DISCOVER STRATEGIES FOR MILLING LUMBER STRAIGHT, FLAT, AND SQUARE, CREATING CURVES THROUGH BENDING, LAMINATING AND COOPERING, AND DEVELOPING TECHNIQUES FOR ROUTING A WIDE RANGE OF COMPLEX SHAPES AND JOINTS. INCLUDES ARTICLES ON: STRAIGHT, FLAT, AND SQUARE MAKING CURVED PIECES MILLING COMPLEX SHAPES BASIC JOINTS MORTISES, TENONS, AND DOVETAILS MODERN JOINTS HARDCOVER, 8-1/2 X 10-7/8 IN., 208 PAGES, WITH COLOR PHOTOS AND DRAWINGS.
|
|
|
|
Books
|
CLASSIC JOINTS WITH POWER TOOLS
|
| Classic Joints With Power Tools
|
|
DO YOU LOVE WOODWORKING---BUT BALK AT THE THOUGHT OF HAND-CHISELING A MORTISE AND TENON JOINT? THEN THESE 100 MARVELOUS ALTERNATIVES ARE JUST RIGHT FOR YOU: JOINTS TO CUT USING POWER TOOLS ALONE, SIMPLIFYING THE PROCESS AND GUARANTEEING SUPERB RESULTS EVERY TIME. AN EXPERIENCED WOODWORKER AND TEACHER TAKES YOU THROUGH ALL THE COMMON WOODSHOP TOOLS-TABLE SAW, BANDSAW, ROUTER, MORTISING MACHINE, BISCUIT JOINTER, DRILL PRESS, AND PLENTY OF SHOP-MADE JIGS--SHOWING HOW EACH CAN FORM PERFECT, TIGHT-FITTING JOINTS. AND, DON'T WORRY IF YOU LACK A PARTICULAR PIECE OF EQUIPMENT: THE SAME JOINT CUT BY A BANDSAW CAN BE DONE WITH A ROUTER OR OTHER TOOL. HUNDREDS OF COLOR PHOTOS AND ILLUSTRATIONS DETAIL HOW TO SET UP THE NECESSARY MACHINES AND ACCESSORIES FOR EVERYTHING FROM SIMPLE DOWELS, SPLINES, OR BISCUITS TO MORE CHALLENGING MITERS, RABBETS, TONGUE-AND-GROOVE, MORTISE-AND-TENON, DOVETAILS, AND BOX JOINTS. YOU'LL HAVE CLASSIC JOINTS FOR ALL YOUR PROJECTS IN HALF THE TIME OF DOING THEM BY HAND. 8 1/2 X 10. ALL IN COLOR. 176 PAGES, PAPERBACK W/FLAP.
|
|
|
|
Books
|
MAKING HEIRLOOM BOXES
|
| Making Heirloom Boxes
|
|
BEAUTIFUL BOXES LOVINGLY HANDCRAFTED WITH COMPARTMENTS TO STORE CHERISHED KEEPSAKES, OR A WRITING SLOPE FOR THE RELATIVE WHO PREFERS OLD-FASHIONED CORRESPONDENCE: THESE PIECES ARE MADE TO LAST. GUIDED BY AN EXPERIENCED WOODWORKER AND HUNDREDS OF PHOTOS, ENJOY A FULL COURSE IN BOX MAKING THAT COVERS EVERYTHING YOU NEED TO KNOW: SOURCING AND SEASONING DIFFERENT TYPES OF WOOD; CHOOSING AND USING TOOLS AND EQUIPMENT; AND MASTERING BASIC TECHNIQUES LIKE MAPPING OUT THE DESIGN, MAKING DOVETAILS, ASSEMBLING THE INTERNAL PIECES, AND MORE. THE PROJECTS INCLUDE A STRAP-HINGED BOX WITH A CURVED DRAWER, A CHESS BOX WITH BOARD INSIDE, AND A SKELETON BOX THAT BEGAN AS A MISTAKE BUT TURNED OUT WONDERFULLY! 8 1/4 X 10 7/8. ALL IN COLOR. 144 PAGES, PAPERBACK.
|
|
|
|
Books
|
ROUTER TIPS & TECHNIQUES©
|
| Router Tips And Techniques
|
|
IT'S A LIFETIME'S WORTH OF ROUTING KNOWLEDGE IN ONE COLLECTION. THIS COMPILATION OF SUPERB ARTICLES COVERS JUST ABOUT ANYTHING YOU COULD IMAGINE - VISE JAWS, TRIMMING KEYS AND DOVETAILS, MAKING MULTIPLE MORTISES, CLEANING OFF DOWELS AND TENONS, CROSS HALVING JOINTS, FIELDING AND BEVELING AND LOTS MORE. SEE BRILLIANT EXAMPLES OF INGENUITY, INCLUDING SUB-BASES FOR ANGLED ROUTING AND DOZENS OF GADGETS, JIGS AND CUTTERS. LARGE COLOR PHOTOS, MANY IN CLOSE-UP, AND DIAGRAMS ILLUSTRATE EVERY PROCESS IN DETAIL. SET UP A JOINTING BOARD FOR USE WITH A ROUTER, WORK SHORT SLOTS, LEARN THE BEST TECHNIQUE FOR DRILLING HOLES IN A LINE - AND FOR VENEERING. SOFTCOVER, 8-1/4" X 11-3/4", 112 PAGES.
|
|
|
|
Books
|
WOODWORKING BASICS©
|
| Woodworking Basics
|
PROFESSIONAL FURNITURE MAKER PETER KORN HELPS NEW WOODWORKERS LEARN THE RIGHT TECHNIQUES FROM THE BEGINNING. MORE EXPERIENCED WOODWORKERS CAN USE IT TO MASTER THE CLASSIC FURNITURE-MAKING SKILLS KEY TO FINE CRAFTSMANSHIP:
INCLUDES TWO ATTRACTIVE AND USEFUL PROJECTS - A SMALL BENCH AND A SIDE TABLE WITH A DOOR AND DRAWER - PROVIDING THE OPPORTUNITY TO PRACTICE SKILLS AND DEVELOP CONFIDENCE WITH TOOLS. STEP-BY-STEP INTRODUCTIONS COVER THE SAFE USE OF WOODWORKING MACHINERY, CORRECT USE OF HAND TOOLS, MILLING A BOARD FOURSQUARE, CUTTING A MORTISE-AND-TENON JOINT AND CUTTING DOVETAILS. SOFTCOVER, 8-1/2" X 11", 192 PAGES WITH COLOR PHOTOS AND DRAWINGS.
|
|
|
|
Books
|
GET THE MOST OUT OF YOUR INCRA® JIG
|
| Incra Jig Projects & Techn.
...plus other(s)
|
WITH EITHER OR BOTH OF THESE PUBLICATIONS, YOU WILL LEARN HOW TO USE YOUR INCRA® JIG IN WAYS YOU DIDN'T IMAGINE WERE POSSIBLE:
875-587 - INCRA® JIG PROJECTS & TECHNIQUES© HAS 148 PAGES OF TIPS AND TECHNIQUES: OVER 400 ILLUSTRATIONS AND PHOTOS TO BUILD 14 OF AUTHOR PERRY MCDANIEL'S INTRIGUING ORIGINAL PROJECTS. ALSO INCLUDED ARE 11 TECHNIQUES SECTIONS TO TURN ANY WOODWORKER INTO A REAL PRO, PLUS COMPLETE INSTRUCTIONS FOR MAKING FOUR EXCLUSIVE NEW INCRA® JOINTS. AS AN ADDED BONUS, FREE TEMPLATES FOR MAKING THE DOUBLE-DOUBLE THROUGH DOVETAIL AND CORNERPOST EAGLETAIL.
859-966 - INCRA® MASTER REFERENCE GUIDE & TEMPLATE LIBRARY© INCLUDES OVER 200 DETAILED ILLUSTRATIONS AND PHOTOS AND COMES WITH 51 MULTI-COLOR TEMPLATES AND FULL SIZE PLANS FOR MAKING SIMPLY AMAZING JOINTS - DURABLE LEXAN® TEMPLATES ARE 16" LONG. USA.
|
|
|
|
Hand Tools - Cutting
|
JAPANESE HANDSAWS OFFER PROVEN, TRADITIONAL APPROACH TO MODERN WOODWORKING
|
| Douzuki Dovetail Saw 150mm
...plus other(s)
|
MANUFACTURED FROM HARDENED STEEL, IKEDA® FINE TOOLS' DOUZUKI, KUGIHIKI, RYOBA AND KATABA HANDSAWS ALL CUT ON THE PULL STROKE, WHICH REDUCES SAW BLADE FATIGUE AND PREVENTS BOWING. SUITABLE FOR HARDWOOD AS WELL AS SOFTWOOD, JAPANESE SAWS REQUIRE LESS POWER AND ENSURE GREAT PRECISION:
117-521, 117-533 - DOUZUKI 5.85" (150MM) AND 8.27" (210MM) DOVETAIL SAWS HAVE RIGID BACKS FOR STRAIGHT CUTTING; BLADES ARE 0.0078" (0.2MM) THICK. USED FOR CROSS AND ANGLED CUTS. 15-3/8 AND 20-3/8" OVERALL LENGTHS. 117-551 - THE EXTREMELY FLEXIBLE KUGIHIKI GOLD 7.02" (180MM) FLUSH CUT SAW HAS A 0.0078" (0.2MM) THICK BLADE. USED FOR TRIMMING DOWELS FLUSH WITH SURFACE; TEETH HAVE NO SET TO ELIMINATE SCRATCHES. OVERALL LENGTH 16-1/4". 117-578 - THE CLASSIC RYOBA 9.36" (240MM) DOUBLE CROSSCUT SAW HAS A 0.0195" (0.5MM) THICK BLADE. TEETH ON BOTH EDGES OF SAW BLADE. 22" OVERALL. 117-584 - THE KATABA GOLD 9.75" (250MM) COMBINATION CROSSCUT/RIP SAW HAS A 0.0195" (0.5MM) THICK BLADE, WHILE THE KATABA 11.7" (300MM) CURVED CROSSCUT SAW (117-590) HAS A 0.0234" (0.6MM) THICK BLADE. WORK LIKE PANEL SAWS AND USED FOR QUICKLY CUTTING WOOD TO SIZE. OVERALL LENGTHS 22" AND 23-5/8". LONG, WOODEN HANDLES ON ALL SAWS PROVIDE EXCELLENT BALANCE AND ARE RATTAN WRAPPED FOR A BETTER GRIP. REPLACEABLE BLADES SHOULD LAST SEVERAL YEARS DEPENDING UPON USE AND TYPES OF WOOD BEING CUT. JAPAN.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
