|
|
|
Hardware Hinges - Accessories
|
SOFT DUROMETER BUMPERS DEADEN SOUND OF DOOR AND DRAWER CLOSINGS
|
| Pyramidal Soft Bumpers
...plus other(s)
|
SOFT DUROMETER BUMPERS ARE 21% SOFTER, PURE POLYURETHANE AVAILABLE IN A VARIETY OF SOUND-DAMPENING SHAPES:
TWO-STAGE, PYRAMIDAL BASE, SHOCK-ABSORBING TIP. CYLINDRICAL, TRADITIONAL. HEMISPHERICAL, TRADITIONAL. EURO-HINGE, AIR ENTRAPMENT (QUIETIST DESIGN). ALL STYLES HAVE A DURABLE PEEL-AND-STICK BACKING FOR EASY, PERMANENT INSTALLATION - 200 PCS. PER PAD.
|
|
|
|
Hardware Hinges - Accessories
|
SOFT DUROMETER BUMPERS QUIET DOOR CLOSING
|
| Cylindrical Soft Bumpers
...plus other(s)
|
THESE SOFT DUROMETER BUMPERS ARE MADE FROM 100% POLYURETHANE IN A SOFTER FORMULATION TO PROVIDE BETTER SOUND DAMPENING THAN STANDARD BUMPERS:
CRYSTAL CLEAR WITH DURABLE PEEL AND STICK ADHESIVE BACK. APPLICATIONS INCLUDE NON-SLIP SUPPORTS FOR CUTTING BOARDS, PICTURE FRAMES, COMPUTER COMPONENTS AND OFFICE EQUIPMENT. CYLINDRICAL SHAPED BUMPER IS 1/2" DIAMETER X .140" THICK; HEMISPHERICAL BUMPER IS 3/8" DIAMETER X .150" THICK. 200 PER SHEET - "KISS CUT" FOR EASY REMOVAL FROM PROTECTIVE LINER. USA.
|
|
|
|
Hardware Hinges - Accessories
|
CLEAR POLYURETHANE AND FOAM BUMPERS QUIET DOORS AND DRAWERS
|
| Clear Hemispherical Bumper
...plus other(s)
|
POLYURETHANE BUMPERS ARE THE CLEAREST ON THE MARKET; RESILIENT FOAM BUMPERS ARE AVAILABLE IN BROWN AND WHITE:
NON-STAINING AND NON-MARRING. CRACK RESISTANT AND RESILIENT. BOTH FEATURE EASY PEEL-AND-STICK APPLICATION. USA.
|
|
|
|
Hardware Hinges - Butt
|
NON MORTISE CABINET DOOR HINGES
|
| 1-1/2x13/16 Nm Hinge-stat Brz
...plus other(s)
|
NON MORTISE CABINET HINGES ARE AN INDUSTRY STANDARD FOR INSET DOORS, LARGE AND SMALL:
THESE HINGES LEAVE ONLY A GAP OF 1/16" BETWEEN THE DOOR EDGE AND THE CABINET CASE. DIMENSIONS SHOWN ARE H X W. TIGHT PIN, PLAIN END HINGES COME IN STATUARY BRONZE OR BRASS FINISH (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® SPRING LOADED HINGES HOLD CABINET DOORS OPEN OR CLOSED
|
| S/c Hinge 3/8 Inset-antique English
|
AMEROCK® SPRING LOADED HINGES PROVIDE MAXIMUM VERSATILITY:
DESIGNED FOR 3/8" INSET DOORS (RABBETED EDGE). SPRUNG TO CLOSE DOORS OR HOLD DOORS OPEN AT 35°. ANTIQUE ENGLISH FINISH; FELT BUMPERS AND SCREWS INCLUDED. HINGES MEET OR EXCEED KMCA STANDARDS. SOLD IN PAIRS.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Hinges - Cabinet
|
A NEW FINISH FOR TRADITIONAL CABINET HINGES
|
| S/c Hinge 3/8 Inset-oil Rub. Bronze
...plus other(s)
|
FOR 3/8 INSET DOORS OR FLUSH OVERLAY APPLICATIONS, AMEROCK® CABINET HINGES ARE NOW AVAILABLE WITH AN OIL RUBBED BRONZE FINISH:
SELF CLOSING ACTION - MEET OR EXCEED KCMA STANDARDS. SCREWS AND FELT BUMPERS INCLUDED. SOLD IN PAIRS.
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® SPRING LOADED HINGES HOLD CABINET DOORS OPEN OR CLOSED
|
| S/c Hinge 3/8 Inset-burnished Brass
...plus other(s)
|
AMEROCK® SPRING-LOADED HINGES ARE AVAILABLE IN TWO STYLES AND FOUR FINISHES TO PROVIDE MAXIMUM VERSATILITY:
INSET HINGES ARE DESIGNED FOR 3/8" INSET DOORS (RABBETED EDGE) WHILE VARIABLE OVERLAY HINGES ACCOMMODATE FULL OVERLAY DOORS. SPRING-LOADED TO CLOSE OR HOLD DOORS OPEN AT 35°. HINGES MEET OR EXCEED KMCA STANDARDS. SOLD IN PAIRS AND BULK BOXES WITH FELT BUMPERS AND MOUNTING SCREWS INCLUDED.
|
|
|
|
Hardware Hinges - Cabinet
|
MARATHON® SELF CLOSING KNIFE HINGES PERFORM BETTER, LAST LONGER
|
| #3 1/4"ol-1/2"door Pb Marathon Hng
...plus other(s)
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® NON-MORTISE HINGES ALLOW A CLOSE FIT ON INSET DOORS
|
| Full Wrap Minaret-polished Brass
...plus other(s)
|
AMEROCK® FULL INSET, NON-MORTISE HINGES PROVIDE A CLOSE-FITTING (1/16" GAP) DECORATIVE LOOK ON TRADITIONAL, INSET STYLE DOORS WITHOUT MORTISING:
DESIGNED FOR USE ON 3/4" THICK STOCK, SLOTTED HOLES ALLOW EASY ADJUSTMENT FOR A PERFECT FIT; HORIZONTAL AND VERTICAL ADJUSTMENTS ARE EASY TO MAKE. USE FULL WRAP FOR FACE FRAME CABINETS AND PARTIAL WRAP FOR FRAMELESS OR FACE FRAME CABINETS. EXCEED KCMA AND BHMA STANDARDS FOR STRENGTH, QUALITY OF FINISH AND ENDURANCE. STEEL IN A VARIETY OF FINISHES OR SOLID BRASS (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Cabinet
|
SURFACE MOUNT CONCEALED HINGES FACE FRAME
|
| Fce Mnt Hng For 5/8" Mat
...plus other(s)
|
GET THE PERFORMANCE OF CUP MOUNTED HINGES FROM THESE DEDICATED SURFACE MOUNTED FACE FRAME HINGES:
QUICK AND EASY TO INSTALL REQUIRE NO BORING OF THE DOOR FOR A HINGE CUP. A PAIR OF HINGES WILL SUPPORT A 30 LB. DOOR AND OPEN TO 90°. DEDICATED HINGE FOR 5/8" MATERIAL OFFERS OVERLAYS OF 16MM° 2MM (5/8" °1/8") AND DEDICATED HINGE FOR 3/4" MATERIAL THICKNESS OFFERS 19MM° 2MM (3/4"° 1/8") ADJUSTMENTS ARE MADE VIA OVAL SLOTS IN THE DOOR MOUNTING FLANGE. NICKEL PLATED STEEL WITH SELF CLOSING MECHANISM. MOUNTING SCREWS ARE INCLUDED WITH EACH PAIR OF HINGES. IMPORTED
|
|
|
|
Hardware Hinges - Concealed
|
SALICE 94° AND 110° HINGES FOR FACE FRAME APPLICATIONS
|
| 94deg (200) F/o Hinge Screw-on
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 94° AND 110° OVERLAY FACE FRAME HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. TAB SETTINGS CAN BE FROM 3MM TO 6MM. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™ (CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST: #6 X 5/8 SCREWS - 828-558. NOTE: HINGES FOR 120° AND 165° OPENING ANGLES ARE AVAILABLE AT 131-246.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE CONCEALED HINGES FOR FRAMELESS OVERLAY CONSTRUCTION FEATURE SIX WAY INDEPENDENT ADJUSTMENT
|
| 94deg (200) H/o Hinge Screw-on 9mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 94°, 110°, 120° OR 165° CONCEALED HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. 3MM TO 6MM TAB SETTINGS. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™(CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). ALL APPLICATIONS REQUIRE A HINGE BODY AND A MOUNTING PLATE (EACH SOLD SEPARATELY.) TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE® C2P7P99 94&DEG: INSET DOOR SCREW ON HINGE
|
| 94deg (200)inset Hinge Screw-on
...plus other(s)
|
SALICE® HINGES FOR INSET DOORS FEATURE 20 LB. PER PAIR LOAD CAPACITY AND 6-WAY ADJUSTMENT FOR A PERFECT FIT. NICKEL PLATED STEEL, 110° OR 165° INSET HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
SIX WAY INDEPENDENT ADJUSTMENT. HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. 3MM TO 6MM TAB (K) SETTINGS. SELECT FROM SCREW-ON, PRESS-IN, CAM-SCREW OR TOOL FREE-MOUNTING (SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SELF CLOSING SALICE INSET FACE FRAME HINGES FEATURE SIX WAY ADJUSTMENT
|
| 110d (200) 1/2"ol Hng Screw-on 5mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE INSET FACE FRAME HINGES HAVE 11MM CUPS, ALLOWING USE IN DOORS UNDER 3/4" THICK:
SELECT FROM SCREW-ON, PRESS-IN, CAM-SCREW (RAPIDO™) OR TOOL-FREE (LOGICA™) MOUNTING STYLES. HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY TO HINGES. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). SCREW ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). LIFETIME WARRANTY. ITALY.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE 120° AND 165° HINGES FOR FACE FRAME APPLICATIONS
|
| 120d (200)f/o Hinge Screw-on 0mm
...plus other(s)
|
NICKEL PLATED STEEL, SALICE 110° AND 165° OVERLAY FACE FRAME HINGES HAVE CUP DEPTHS OF ONLY 11MM, ALLOWING USE IN DOORS UNDER 3/4" THICK:
HINGES SNAP MOUNT ONTO BASEPLATES - NO TOOLS REQUIRED. SELF CLOSING - 20 LBS. PER PAIR LOAD RATING. EXTENDED CUP FLANGES ADD STRENGTH AND STABILITY. 35MM CUP. DIA. WITH 45MM FASTENER SPREAD (BLUM® BORING PATTERN). COMPATIBLE WITH ALL DOMI® STAMPED STEEL OR DIE CAST ZINC ALLOY MOUNTING PLATES. 3MM TO 6MM TAB SETTINGS. CHOOSE FROM SCREW-ON, PRESS-IN (WITH 8MM DOWELS); RAPIDO™ (CAM SCREW) OR LOGICA™(TOOL-FREE) HINGE CUP MOUNTING STYLES. SCREW-ON COMPONENTS REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCKUP RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
NOTE: HINGES FOR 94° AND 110° OPENING ANGLES ARE AVAILABLE AT 131-156. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE® C2RYA99 BIFOLD DOOR HINGES
|
| Pie Cut (bi-fold) Cnr Hng Press-in
...plus other(s)
|
SALICE® PIE CUT CORNER HINGES WITH SIX-WAY INDEPENDENT ADJUSTMENT SIMPLIFY INSTALLATION OF BI-FOLD DOORS ON LAZY SUSAN CABINETS. SALICE® PIE CUT CORNER HINGES WITH SIX-WAY INDEPENDENT ADJUSTMENT SIMPLIFY INSTALLATION OF BI-FOLD DOORS ON LAZY SUSAN CABINETS. SELF CLOSING SALICE PIE CUT CORNER HINGES FEATURE SIX WAY INDEPDENT ADJUSTMENT - HINGES SNAP ON TO MOUNTING PLATES:
35MM CUP DIA. - INSTALL IN BLUM® BORING PATTERN - ONLY REQUIRE A 4MM TAB (K). COMBINE BI-FOLD (PIE CORNER) HINGE WITH 165° HINGES ON THE CABINET FOR BEST ACCESS TO PIE CUT LAZY SUSANS. REQUIRE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). TRIAL MOCK-UP IS RECOMMENDED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. ITALY. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
RUGGED SALICE HINGES ALLOW YOU NEARLY LIMITLESS CABINET DOOR DESIGN OPTIONS
|
| 110d 7-pin Series B Hinge Screw-on
...plus other(s)
|
SEVEN PIN ARTICULATION LETS THIS SALICE HINGE WORK WITH PARTIAL INSERT, MITERED CORNER, LONG OVERLAY OR MOLDED EDGE DOORS UP TO 26MM THICK:
TAB (K) CAN RANGE FROM 3MM TO 18MM ON SQUARE EDGE DRAWERS; UP TO 23MM ON MOLDED EDGE DOORS. SELF CLOSING HINGE WITH 110° OPENING ANGLE, 35MM SCREW-ON CUP (BLUM® BORING PATTERN) AND ONLY 9MM CUP DEPTH - REQUIRES #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). SNAP ON ATTACHMENT OF HINGES TO MOUNTING PLATES. COMPATIBLE WITH ALL DOMI® STAMPED STEEL AND DIE CAST ZINC ALLOY MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. ITALY. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6X5/8" FLAT HEAD NICKEL-PLATED SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
SALICE CONCEALED HINGES HANDLE THICK, HEAVY DOORS
|
| 94d 40mm F/o (f) Hinge Screw-on
...plus other(s)
|
THESE SALICE CONCEALED HINGES ARE THE HINGES OF CHOICE FOR POCKET DOOR APPLICATIONS:
LARGER 40MM DIA. CUP WITH 52MM SCREW SPACING WILL HANDLE INSET DOORS UP TO 1-1/2" (40MM) THICK OR OVERLAY DOORS UP TO 1-5/16" (33MM) THICK - 20 LBS. LOAD RATING PER PAIR. SELF-CLOSING HINGES HAVE A 94° CLOSING ANGLE - USE #6 X 5/8" FLAT HEAD WOOD SCREWS (SOLD SEPARATELY). COMPATIBLE WITH ALL DOMI® MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. ITALY.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8" FH NICKEL SCREWS - 828-558 .
|
|
|
|
Hardware Hinges - Concealed
|
OVERLAY DOORS FOR FRAMELESS CABINETS ARE EASY TO INSTALL WITH BLUM® CLIP TOP™ HINGES
|
| 107d F/o Hinge Cliptop Screw-on
...plus other(s)
|
ALL STEEL, NICKEL PLATED BLUM® CLIP TOP™ HINGES FEATURE THREE DIMENSIONAL ADJUSTMENT INCLUDING SPIRAL- TECH™ DEPTH ADJUSTMENT:
THREE-POINT CONNECTION BETWEEN HINGE AND MOUNTING PLATE FOR ADDED STRENGTH. AUDIBLE "CLIP" SOUND CONFIRMS ATTACHMENT OF THE HINGE TO THE MOUNTING PLATE. 107, 120 OR 170 DEGREE OPENING ANGLES FOR OVERLAY DOORS. SCREW-ON, PRESS-IN (DOWELLED) OR INSERTA™ TOOL-FREE CUP MOUNTING. ALL SCREW-ON CUPS AND MOUNTING PLATES ATTACH WITH #6X5/8" FH NICKEL PLATED SCREWS. (FASTENERS SOLD SEPARATELY) A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
EURO HINGE SCREWS #6X5/8 - 858-228.
|
|
|
|
Hardware Hinges - Concealed
|
USE BLUM® CLIP TOP™ TECHNOLOGY FOR FACE FRAME CABINET DOORS
|
| Ff Plate F/inset Doors Screw-on
...plus other(s)
|
ALL STEEL, NICKEL-PLATED BLUM® CLIP TOP™ FACE FRAME HINGES FEATURE THREE-DIMENSIONAL ADJUSTMENT USING SPIRAL TECH™ DEPTH ADJUSTMENT:
THREE POINT CONNECTION BETWEEN HINGE AND MOUNTING PLATE FOR ADDED STRENGTH. AUDIBLE "CLIP" SOUND CONFIRMS THE ATTACHMENT OF THE HINGE TO THE MOUNTING PLATE. OPENING ANGLES FROM 107° TO 170° FOR OVERLAY APPLICATIONS. OPENING ANGLES OF 107 OR 120 DEGREES FOR INSET DOOR APPLICATIONS. SCREW-ON, PRESS-IN OR INSERTA™ TOOL FREE HINGE MOUNTING. FACE FRAME ADAPTER PLATES SCREW ON TO CABINET FRAME. USE FLANGED, WRAPAROUND MOUNTING PLATE FOR ADDED STRENGTH WITH 170° HINGES IN OVERLAY APPLICATIONS. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREWS - 828-558. #7 X 5/8 HINGE SCREWS - 938-426. #8 X 3/4 HINGE SCREWS - 946-140.
|
|
|
|
Hardware Hinges - Concealed
|
TWIN OVERLAY DOORS ARE SIMPLE WITH BLUM® HINGES
|
| 107d H/o Hinge Cliptop Screw-on
...plus other(s)
|
THESE BLUM® BACK TO BACK OVERLAY DOOR HINGES ARE AVAILABLE IN SCREW-ON, PRESS-IN OR INSERTA™ TOOL-FREE MOUNTING STYLES:
MOUNT DOORS BACK TO BACK ON A SINGLE PANEL WITH THESE HINGE AND PLATE COMBINATIONS. THREE OPENING ANGLES (107°, 120°+, 170°). CHOOSE EXPANDO™ PLATE TO MOUNT TWIN DOORS INTO LINE BORED PANELS. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
USE THESE BLUM® CLIP TOP™ HINGES FOR INSET DOORS ON FRAMELESS CABINETS
|
| 107d Inset Hinge Cliptp Screw-on
...plus other(s)
|
NICKEL PLATED STEEL, SELF CLOSING BLUM® CLIP TOP™ HINGES ARE AVAILABLE IN SCREW-ON, PRESS-IN OR INSERTA™ TOOL-FREE MOUNTING STYLES:
THREE OPENING ANGLES (107, 120 OR 170 DEGREES). THREE DIMENSIONAL ADJUSTMENTS INCLUDING SPIRALTECH™ DEPTH ADJUSTMENT FOR EASE OF ALIGNMENT. MOUNT USING STANDARD BLUM® BORING PATTERN FOR HINGE CUPS. PLATES MOUNT 38.5MM + DOOR THICKNESS FROM FRONT OF CABINET. COMPATIBLE WITH ALL CLIP™ MOUNTING PLATES. LIFETIME MANUFACTURER'S WARRANTY. A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREW - 858-228. #6 X 1/2 HINGE SCREW - 145-988.
|
|
|
|
Hardware Hinges - Concealed
|
THESE BLUM® HINGES HANDLE DOORS UP TO 30MM THICK
|
| 95d F/o Hinge Td Cliptp Screw-on
...plus other(s)
|
THESE SELF CLOSING, NICKEL PLATED STEEL BLUM® CLIP TOP™ HINGES FEATURE THREE DIMENSIONAL ADJUSTMENT, INCLUDING SPIRAL-TECH™ CAM DEPTH ADJUSTMENT BUILT INTO THE HINGE ARM:
95° OPENING ANGLE - USE FOR FRAMELESS PANEL OR FACE FRAME CONSTRUCTION. SCREW ON, PRESS IN OR TOOL FREE (INSERTA™) MOUNTING. ALL CLIP TOP™ HINGES COMPATIBLE WITH CLIP SERIES MOUNTING PLATES. SCREW ON HINGES AND MOUNTING PLATES REQUIRE #6 X 5/8" FLAT HEAD SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
EURO HINGE SCREWS #6X5/8" - 858-228.
|
|
|
|
Hardware Hinges - Concealed
|
BLUM® CLIP TOP™ HINGES FOR BLIND CORNER INSET DOORS
|
| 95d Inset Blnd Crnr Hng Screw-on
...plus other(s)
|
THESE BLUM® CLIP TOP™ HINGES ALLOW YOU TO MOUNT INSET DOORS WHERE NO SIDE WALL PANEL IS AVAILABLE:
ALL STEEL WITH NICKEL PLATING. THREE DIMENSIONAL ADJUSTMENT FOR A PERFECT FIT - MINIMUM 70MM CABINET WIDTH REQUIRED TO MOUNT HINGES. 134-396, 134-459 - SCREW ON HINGES AND PLATES REQUIRE #6 X 5/8" WOOD SCREWS (SCREWS SOLD SEPARATELY). A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
BLUM® BLIND CORNER OVERLAY DOOR HINGES
|
| 95d O/l Blnd Crnr Hng Screw-on
...plus other(s)
|
ALL STEEL, NICKEL PLATED BLUM® CLIP TOP™ BLIND CORNER OVERLAY DOOR HINGES ALLOW YOU TO MOUNT OVERLAY DOORS WHERE NO SIDE WALL PANEL IS AVAILABLE:
OVERLAYS DETERMINED BY PLATE SETBACK AND BORING DISTANCE (TAB K). DOOR GAP IS DETERMINED BY PLATE HEIGHT. STATIONARY PANEL MUST BE A MINIMUM 86MM TO ACCOMMODATE HINGE. 134-408, 134-459, 134-462 - SCREW ON HINGES AND PLATES REQUIRE #6 X 5/8" WOOD SCREWS (SCREWS SOLD SEPARATELY). A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
BLUM® HINGES FOR 45° DIAGONAL INSIDE CORNER DOORS
|
| 45d Diag Corner Hng Screw-on
...plus other(s)
|
ALL STEEL, NICKEL PLATED BLUM® CLIP TOP™ 45° DIAGONAL INSIDE CORNER DOOR HINGES ALLOW YOU TO MOUNT CORNER DOORS AT 45° BETWEEN ADJACENT OVERLAY DOORS:
THREE DIMENSIONAL ADJUSTMENT FOR PERFECT ALIGNMENT. 134-420, 134-459 - SCREW ON HINGES AND PLATES REQUIRE #6 X 5/8" WOOD SCREWS (SCREWS SOLD SEPARATELY). A TRIAL MOCKUP IS SUGGESTED FOR ALL APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 HINGE SCREWS - 828-558.
|
|
|
|
Hardware Hinges - Concealed
|
LARGE OVERLAYS ON FACE FRAME DOORS ARE EASY WITH THESE BLUM® HINGES
|
| 1" O/l 1-pc Ff Hinge Press-in
...plus other(s)
|
OPENING 110°, BLUM® COMPACT™ 39C FACE FRAME HINGES USE SCREW-ON OR PRESS-IN MOUNTING FOR WIDER WRAPAROUND APPLICATIONS:
ALL STEEL, ONE PIECE ASSEMBLY WITH NICKEL PLATING - 1/2" CUP DEPTH. DESIGNED FOR 3/4" THICK FRAMES. ±1/8" HEIGHT ADJUSTMENT; ±1/16" CAM SIDE ADJUSTMENT AND +3/32"-1/32" CAM ADJUSTMENTS. DIE CAST ZINC WRAPAROUND MOUNTING PLATES ARE FOR 1", 1-1/4" AND 1-9/16" OVERLAYS. SCREW-ON CUPS REQUIRE #6 X 5/8" NICKEL PLATED SCREWS - MOUNTING PLATES USE #10 X 3/4" PAN HEAD SCREWS (SCREWS SOLD SEPARATELY). TAB (K) 2.5MM. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8" FH SCREWS - 828-558. #10 X 3/4" NICKEL PLATED PAN HEAD SCREWS - 155-600.
|
|
|
|
Hardware Hinges - Concealed
|
REDUCTION CLIPS ALLOW SPECIAL BLUM® HINGE APPLICATIONS
|
| 130d Red. Clip For 170d Hinge
...plus other(s)
|
BLUM® REDUCTION CLIPS ALLOW FOR SPECIAL APPLICATIONS INCLUDING THICK DOORS, THICK DOOR TWINS, LIPPED DOORS OR MITERED CORNERS:
70.6103 - REDUCTION CLIP FOR 170° HINGES REDUCES THE OPENING ANGLE TO 130°. 74.1103 - REDUCTION CLIP FOR 107° HINGES REDUCES THE OPENING ANGLE TO 86°. CLIPS INSTALL QUICKLY WITHOUT TOOLS - ALLOW APPLICATIONS ON CABINETS ADJACENT TO LARGE APPLIANCES OR WALLS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
CLEARANCE-PRICED 45° CORNER OVERLAY HINGES
|
| 45d Corner Hinge Press-in
...plus other(s)
|
248.0N16.05 45° CORNER OVERLAY HINGES ARE ENGINEERED FOR CABINETS WITH DOORS SET AT 45°:
FIT STANDARD BLUM® BORING PATTERN - PRESS-IN MOUNTING. CLIP ATTACHMENT OF HINGE TO BASEPLATE - 3MM TO 5MM TAB SETTINGS. HINGES AND BASEPLATES SOLD SEPARATELY. LIFETIME MANUFACTURER'S WARRANTY. EASTERN EUROPE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Hinges - Concealed
|
QUIET, CONCEALED AND COMPACT SILENCE HINGES FOR FRAMELESS (PANEL) INSERT DOOR OVERLAY CONSTRUCTION
|
| Silence Hng Inset Screw-on
...plus other(s)
|
RECOGNIZED FOR "GREAT DESIGN" AND ADDING "A WHOLE NEW CONCEPT TO A TRIED AND TRUE HINGE," THE PNEUMATICALLY ADVANCED, SELF CLOSING RUCA SILENCE HINGE FEATURES A SLIM PROFILE WITH A SELF-LUBRICATING PISTON CONCEALED IN THE HINGE ARM. PATENTED STAINLESS STEEL, FOUR-PIVOT POINT LINK SYSTEM EQUALIZES STRESS TO ENSURE SMOOTH SELF-CLOSING WITHOUT THE NEED FOR ADDITIONAL PARTS:
HINGE OPENS TO 105°. PISTON AND LINKS WORK TOGETHER TO PERFORM QUIET, UNASSISTED CLOSING 45° DEGREES BEFORE CLOSURE. LOOKS AND INSTALLS THE SAME AS STANDARD CONCEALED HINGES (SCREW-ON OR PRESS-IN. CLIP-ON CONNECTION MAKES FOR FASTER AND EASIER ADJUSTMENTS. EXCEEDS ALL ANSI/KCMA AND BHMA GRADE 2 REQUIREMENTS. IDEAL FOR NEW APPLICATIONS OR RETROFITTING MOST CABINET DOORS.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
