|
|
|
Dust Collection - Air Filtration Systems
|
DELTA® FIXED AND PORTABLE AIR CLEANERS FILTER OUT POTENTIALLY HAZARDOUS DUST
|
| Ambient Air Cleaner
...plus other(s)
|
THE DELTA® MODEL 50-875 AMBIENT AIR CLEANER CAN HANG INCONSPICUOUSLY FROM THE CEILING OR BE BENCH MOUNTED, QUIETLY SCRUBBING THE AIR:
120V, 1/5HP, 1PH, 1,025 RPM MOTOR - 540, 730, 1,200 CFM OPERATION. REMOTE CONTROL FOR EASY OPERATION (REQUIRES 2 AAA BATTERIES, NOT INCLUDED). CAN BE SET TO RUN UP TO 7-1/2 HOURS (30 MINUTE INCREMENTS) THEN SHUT OFF, AUTOMATICALLY. FILTERS ARE EASY TO CHANGE WITHOUT TOOLS AND TRAP UP TO 91% OF 1 MICRON PARTICLES. INCLUDES FILTERS, PATENTED DIRTY FILTER INDICATOR, HANGING HOOKS, POWER CORDS, MOUNTING HARDWARE AND INSTRUCTIONS.
EASY GRIP HANDLES MAKE MOVING THE DELTA® SHOPMASTER™ MODEL AP-200 PORTABLE AIR CLEANER QUICK AND EASY:
120VAC, 1/8HP, 1PH, 1,050 RPM MOTOR; 850 CFM (1 MICRON FILTRATION). FILTER SYSTEM INCLUDES DISPOSABLE PLEATED OUTER FILTER AND THREE POCKET INNER FILTER. NO TOOLS REQUIRED FOR FILTER REPLACEMENT. DURABLE, POWDER COATED, ALL STEEL CONSTRUCTION. INCLUDES FOUR EYE BOLTS AND FLANGE NUTS FOR SUSPENDING FROM CEILING (CHAINS NOT INCLUDED), FOUR NON-MARRING RUBBER FEET, 6'L POWER CORD WITH ON/OFF ROCKER SWITCH AND INSTRUCTIONS.
EACH IS 12"H X 24"W X 30"L. 50 LBS. NET WEIGHT; 62 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
DELTA 1 HP DUST COLLECTOR IS AVAILABLE IN BAG OR CANISTER FILTER
|
| 1hp Dust Collector-bag Type
...plus other(s)
|
|
1HP TEFC MOTOR FOR LONG SERVICE LIFE IN DUST ENVIRONMENTS CHOOSE BAG FILTER (1 MICRON) OR CANISTER FILTER (2 MICRON) MODEL PLASTIC COLLECTION BAG TO FORCE RETURN AIR THROUGH FILTER STEEL IMPELLER WITH CURVED BLADES PRODUCES MAXIMUM AIR FLOW STURDY ENCLOSED BASE WITH 4 SWIVEL CASTERS 2 YEAR MANUFACTURER'S WARRANTY IMPORTED
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
NEW DELTA® INDUSTRIAL DUST COLLECTORS FILTER BETTER, ASSEMBLE EASIER
|
| Dust Collector 1-1/2hp 1200cfm
...plus other(s)
|
DELTA® INDUSTRIAL DUST COLLECTORS USE HIGHLY EFFICIENT 1 MICRON FILTER MATERIAL, SNAP IN BAG RINGS TO ELIMINATE LOCK STRAPS AND HOUSINGS THAT CAN BE MOUNTED WITH DUST PORT(S) FACING UP OR DOWN. STEEL BASES WITH 4 CASTERS INCLUDED:
50-760 - 1,200 CFM SINGLE BAG, 20.5 SQ. FT. FILTER W/2.4 CU. FT. CHIP CAPACITIES, TWO 4" AND ONE 5" MAIN DUST PORTS - 1-1/2 HP, 120/240VAC, 1PH, 83"H X 35"W X 19"D, WEIGHS 100 LBS. 50-761 - 2,100 CFM DOUBLE BAG, 41 SQ. FT. FILTER W/4.8 CU. FT. CHIP CAPACITIES, THREE 4" AND ONE 7" MAIN DUST PORTS - 2 HP, 230VAC, 1PH, 87"H X 57"W X 19"D, WEIGHS 132 LBS. 50-762 - 3,100 CFM DOUBLE BAG, 57.2 SQ. FT. FILTER W/7.6 CU. FT. CHIP CAPACITIES, FOUR 4" AND ONE 8" MAIN DUST PORTS - 3 HP, 230/460VAC, 3PH, 110"H X 66"W X 23"D, WEIGHS 186 LBS. 50-763 - SAME AS 50-762 BUT WITH 3 HP, 230VAC, 1PH MOTOR. 50-764 - 4,600 CFM DOUBLE BAG, 140.8 SQ. FT. FILTER W/12.4 CU. FT. CHIP CAPACITIES, FOUR 5" AND ONE 10" MAIN DUST PORTS - 5 HP, 230/460VAC, 3PH, 110"H X 75"W X 26"D, WEIGHS 260 LBS. 50-765 - SAME AS 50-764 BUT WITH 5 HP, 230VAC, 1PH MOTOR. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
NEW DELTA® INDUSTRIAL DUST COLLECTORS FILTER BETTER, ASSEMBLE EASIER
|
| Dust Collector 3hp 3ph 3100cfm
...plus other(s)
|
DELTA® INDUSTRIAL DUST COLLECTORS USE HIGHLY EFFICIENT 1 MICRON FILTER MATERIAL, SNAP IN BAG RINGS TO ELIMINATE LOCK STRAPS AND HOUSINGS THAT CAN BE MOUNTED WITH DUST PORT(S) FACING UP OR DOWN. STEEL BASES WITH 4 CASTERS INCLUDED:
50-760 - 1,200 CFM SINGLE BAG, 20.5 SQ. FT. FILTER W/2.4 CU. FT. CHIP CAPACITIES, TWO 4" AND ONE 5" MAIN DUST PORTS - 1-1/2 HP, 120/240VAC, 1PH, 83"H X 35"W X 19"D, WEIGHS 100 LBS. 50-761 - 2,100 CFM DOUBLE BAG, 41 SQ. FT. FILTER W/4.8 CU. FT. CHIP CAPACITIES, THREE 4" AND ONE 7" MAIN DUST PORTS - 2 HP, 230VAC, 1PH, 87"H X 57"W X 19"D, WEIGHS 132 LBS. 50-762 - 3,100 CFM DOUBLE BAG, 57.2 SQ. FT. FILTER W/7.6 CU. FT. CHIP CAPACITIES, FOUR 4" AND ONE 8" MAIN DUST PORTS - 3 HP, 230/460VAC, 3PH, 110"H X 66"W X 23"D, WEIGHS 186 LBS. 50-763 - SAME AS 50-762 BUT WITH 3 HP, 230VAC, 1PH MOTOR. 50-764 - 4,600 CFM DOUBLE BAG, 140.8 SQ. FT. FILTER W/12.4 CU. FT. CHIP CAPACITIES, FOUR 5" AND ONE 10" MAIN DUST PORTS - 5 HP, 230/460VAC, 3PH, 110"H X 75"W X 26"D, WEIGHS 260 LBS. 50-765 - SAME AS 50-764 BUT WITH 5 HP, 230VAC, 1PH MOTOR. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Dust Collectors Common Brands
|
DELTA® CANISTER STYLE DUST COLLECTOR IS EFFICIENT AND EASY TO CLEAN
|
| 1-1/2hp Dust Collector W/canister
|
THE DELTA® INDUSTRIAL MODEL 50-850A CANISTER DUST COLLECTOR COMES WITH A POWERFUL INDUCTION MOTOR AND 2 MICRON CANISTER FILTER FOR CLEANER, HEALTHIER AIR:
1-1/2 HP, 120VAC, 1PH MOTOR. 1,200 CFM - 12.75 INCHES H20 MAXIMUM STATIC PRESSURE. 33.1 SQ. FT. FILTRATION SURFACE; 6.3 CU. FT. CHIP COLLECTION BAG CAPACITY - EASILY CLEANED BY TURNING ATTACHED HANDLE. INCLUDES TWO 6 MIL PLASTIC CHIP BAGS, SUPPORT DRUM, TWO 4" DIA. DUST PORTS, 6' HOSE, ONE INTAKE CAP, STEEL BASE, FOUR SWIVEL CASTERS, POWER CORD WITH PLUG PLUS AN INSTRUCTION MANUAL. . 88"H X 37"W X 27"D. NET WEIGHT 100 LBS. SHIPPING WEIGHT 120 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
WHY DIDN'T ANYONE THINK OF THIS YEARS AGO?
|
| Less-mess Dust Collector
|
|
SIMPLE, EFFECTIVE IDEA FOR COLLECTING DUST FROM OPEN STAND TABLE SAWS. FITS ALL DELTA® CONTRACTOR AND MOST CRAFTSMAN TABLE SAWS WITH OPEN STANDS. VERY HEAVY DUTY CANVAS FEATURES HEAVY THREAD AND DOUBLE STITCHING. BAG ATTACHES TO SAW BASE WITH INCLUDED SNAPS. REQUIRES SIMPLE DRILLING TO INSTALL. TEMPLATE SHOWS WHERE TO DRILL. ONCE SNAPS ARE ATTACHED, JUST EMPTY BAG ONCE IN AWHILE. USA.
|
|
|
|
Dust Collection - Not Listed Elsewhere
|
TAKE THIS DELTA® PORTABLE AIR CLEANER WHERE AND WHEN IT'S NEEDED
|
| Pleated Outer Pre-filter
...plus other(s)
|
|
|
|
Dust Collection - Plastic Hose & Fittings
|
DELTA® SHOPMASTER™ PORTABLE DUST COLLECTOR GOES TO WHERE THE DUST IS
|
| 4" Dust Connector Kit
...plus other(s)
|
|
|
|
Hand Tools - Turning
|
DELTA®5-PC MICRO TURNING TOOL SET
|
| Delta 5-pc Micro Turning Set
|
IDEAL FOR SMALL PROJECTS AND FINE DETAIL WORK, THE DELTA® 5-PIECE MICRO WOODTURNING TOOL SET COMES WITH A 1/4" ROUGHING OUT GOUGE, 1/8" SPINDLE GOUGE, 1/4" ROUND NOSE SCRAPER, 1/4" SKEW CHISEL AND 1/16" PARTING TOOL. EACH TOOL IS 10" LONG OVERALL:
PRECISION GROUND CUTTING EDGES. HARDWOOD HANDLES WITH BRASS FERRULES. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
THE ONE LID STAY THAT IS CONVERTIBLE, REVERSIBLE, ADJUSTABLE AND DEMOUNTABLE
|
| Convertible Lid Stay
|
STRONG, DIE CAST NICKEL PLATED DELTA CONVERTIBLE LID STAYS STOP THE LID AT INTERMEDIATE POSITIONS AND ALLOW YOU TO PRECISELY ADJUST THE BRAKING POWER:
8"L STAY SUPPORTS LIDS UP TO 20 LBS. ALL HOLES FIT 32MM CENTERS AND CAN BE PLACED 27MM OR 32MM FROM THE EDGE. SIMPLY FASTEN THE BRACKETS TO THE CABINET, THEN SNAP THE SUPPORT INTO PLACE. TENSION CAN BE REVERSED TO SUIT LIFT-UP OR DROP-DOWN FUNCTIONS. OPENING ANGLE ADJUSTS FROM 75° TO 90° BY BRACKET RELOCATION. INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Drawer Slides - Mounting Hardware
|
DELTA ST750 INVISIBLE DRAWER SLIDES
|
| Adjustable Rear Bracket
...plus other(s)
|
|
|
|
Hardware Drawer Slides - Not Listed Elsewhere
|
DELTA CONCEALED DRAWER SLIDES "HIDE" WITH THE DRAWER OPEN
|
| Csm-2000-12" Drwr Slde Ply
...plus other(s)
|
RATED AT 100 LBS., SIDE MOUNTED DELTA CSM 2000 DRAWER SLIDES UTILIZE A CANTILEVER SUSPENSION SYSTEM TO KEEP THE HARDWARE CONCEALED:
BUILT-IN RIGHT ANGLE FLANGES FOR FAST FITTING WITH NO MEASURING - HEAVY GAUGE STEEL CONSTRUCTION. BUILT-IN ADJUSTMENTS ELIMINATE SIDE PLAY (1/2" SIDE CLEARANCE REQUIRED). SELF-CLOSING FEATURE KEEPS DRAWERS FROM REMAINING SLIGHTLY OPEN. BLACK EPOXY COATING (MOUNTING SCREWS AND INSTRUCTIONS INCLUDED). NOTE: SIZES LONGER THAN 18" REQUIRE 1-5/8" BEHIND THE DRAWER. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
UNIQUE DELTA DRAWER SLIDE HANDLES 50 POUND LOADS
|
| Delta 100 Drawer Slide
...plus other(s)
|
EASY AND FAST INSTALLATION MAKES THESE UNIQUE DELTA DG100 DRAWER SLIDES THE CHOICE FOR NEW CONSTRUCTION OR RETROFITTING:
DISC ROLLERS PROVIDE SMOOTH AND EASY MOVEMENT; POSITIVE STOP AND RELEASE LEVER FOR EASY DRAWER REMOVAL. 22-1/2" METAL TRACK CAN BE TRIMMED TO LENGTH. COMPLETE PACKAGE INCLUDES 20 GA. PAINTED STEEL TRACK, PLASTIC WING TO ATTACH TO DRAWER, ADJUSTABLE REAR MOUNTING BRACKET, TWO DISC ROLLERS, MOUNTING SCREWS AND COMPLETE INSTRUCTIONS. USA.
|
|
|
|
Hardware Drawer Slides - Roller Box Drawer
|
DELTA ST750 INVISIBLE DRAWER SLIDES - BULK QUANTITIES, LOW PRICES
|
| 10 Pr Bx 14" Invisible Slide
...plus other(s)
|
WITH THESE 14" AND 20" DELTA DRAWER SLIDES ROLLERS MOUNT TO THE REAR OF THE DRAWER BOX SO NO HARDWARE IS EXPOSED ON THE DRAWER SIDES:
1/2" ± 1/32" SIDE CLEARANCE REQUIRED. EXCEED BIFMA, KCMA AND BHMA 50 LB. CLASS STANDARDS. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Home Improvement - Automotive
|
SMITH & WESSON® FLASHLIGHTS - BRIGHT, DEPENDABLE AND RUGGED
|
| Delta Force Tactical Flashlight
...plus other(s)
|
SW300TWT GALAXY™ 3 LED FLASHLIGHT IS EXCEPTIONALLY LIGHTWEIGHT (4 OZ.) AND DURABLE: ULTRA-BRIGHT WHITE LEDS OFFER FULL SPECTRUM COLOR FOR TRUE LIGHT AND LAST OVER 10 YEARS. SHATTERPROOF LED DIODES LAST OVER 110,000 HOURS AND HAVE UP TO 30 HOURS OF CONTINUOUS BATTERY LIFE. SMALL LIGHTWEIGHT CONSTRUCTION MAKES IT PERFECT FOR POCKETS, PURSES, BACKPACKS AND MORE. INCLUDES 2 AA BATTERIES. 1" DIA. X 6" LONG - TITANIUM CASE (COLOR). SW320XWT 3XGALAXY 2 IN 1 FLASHLIGHT (NOT SHOWN) COMBINES AN ULTRA-BRIGHT XENON BULB WITH THE ENERGY SAVING EFFICIENCY OF 3 WHITE LEDS: PUSH BUTTON SWITCH FOR LED MODE. STOPLIGHT™ LOCK-OUT TAIL CAP FOR XENON MODE. KNURLED GRIP FOR SECURITY. CONSTRUCTED USING PRECISION MACHINED ANODIZED ALUMINUM FOR SUPERIOR CORROSION RESISTANCE. KNURLED GRIP FOR SECURITY. COMES WITH DELUXE NYLON HOLSTER, SPARE XENON BULB AND 2 AA BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6-1/2 OZ. - BLACK CASE. SW750LH GALAXY™ LUXEON 1W LED HEAD LIGHT COMBINES STATE OF THE ART 30 LUMEN LUXEON™ BULB BRIGHTNESS AND RANGE WITH LED EFFICIENCY: 6 CONTINUOUS HOURS OF OPERATION WITH NEW BATTERIES - OVER 100,000 HOURS OF BULB LIFE. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. INCLUDES ADJUSTABLE HEAD STRAP FOR SECURE, COMFORTABLE FIT. REQUIRES 3 AAA BATTERIES (NOT INCLUDED). 1-3/4" DIA. X 2-1/2" LONG; WEIGHS 4.9 OZ. - BLACK CASE. SW422CBO CLASSIC COMBO INCLUDES A COMPACT FLASHLIGHT WITH ULTRA BRIGHT XENON BULB PLUS A DUAL LOCK-BACK KNIFE: XENON BULB PROVIDES POWERFUL WHITE LIGHT 200% BRIGHTER THAN STANDARD BULBS - ADJUSTABLE BEAM GIVES USER GREATER CONTROL AND PRECISION. ANODIZED AEROSPACE ALUMINUM BODY HAS A KNURLED FINISH FOR EASY GRIPPING. SPARE BULB AND 2 AA BATTERIES INCLUDED. 1" DIA. X 6-1/4" LONG; WEIGHS 4 OZ. - BLACK CASE KNIFE FEATURES TWO DURABLE 3" LONG STAINLESS STEEL LOCKING BLADES - ONE IS A RAZOR SHARP STRAIGHT EDGE FOR GENERAL USE; THE SECOND IS SERRATED FOR MORE DIFFICULT CUTTING. THUMB SCREW FOR EASY ONE HANDED OPENING - BELT CLIP INCLUDED. SW720LX GALAXY™ 1W LUXEON LED FLASHLIGHT IS MOST NOTABLE FOR ITS EXCEPTIONAL BRIGHTNESS. THE HIGH-FLUX LUXEON™ BULB PROVIDES THE LONG LASTING LIFE OF AN LED BUT IS 10 TIMES BRIGHTER THAN A STANDARD LED: PRECISION MACHINED ANODIZED ALUMINUM WITH KNURLED GRIP AND PROTECTIVE NOTCHES TO ENSURE NO SLIPPING OR ROLLING. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. DELUXE HOLSTER, LANYARD AND 2 AA BATTERIES INCLUDED. 1-1/4" DIA. X 6-1/2" LONG; WEIGHS 3.5 OZ. - BLACK CASE. SW900XWT 9XGALAXY 2 IN 1 FLASHLIGHT IS THE ULTIMATE COMBINATION OF POWER AND VERSATILITY: FLASHLIGHT COMBINES AN ULTRA BRIGHT XENON BULB (66 LUMENS) WITH THE POWER AND ENERGY SAVING EFFICIENCY OF A 9 WHITE LED FLASHLIGHT. TWIN SWITCH TECHNOLOGY FOR FAST, EASY SELECTION BETWEEN MODES. ANTI-ROLL BAR AND WATER RESISTANT BODY ENSURE MAXIMUM SAFETY IN THE WORKPLACE. COMES WITH DELUXE HOLSTER, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6.5 OZ. - BLACK CASE. SW700XT DELTA FORCE TACTICAL FLASHLIGHT (NOT SHOWN) PRODUCES 93 LUMENS OF BRILLIANT WHITE LIGHT FROM A POWERFUL XENON BULB INSIDE A HIGH DENSITY, AEROSPACE TITANIUM ALUMINUM CASE: ANODIZED INSIDE AND OUTSIDE FOR SUPERIOR CORROSION PROTECTION. LENS MADE OF HIGH TENSION, SHATTERPROOF, AND SCRATCH RESISTANT POLYCARBONATE MATERIAL. DOUBLE O-RING SEALED - FIRE, WATER, MOISTURE, AND CHEMICAL RESISTANT. COMES WITH DELUXE HOLSTER, KEY CHAIN, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1" DIA. X 6" LONG; WEIGHS 4 OZ. - BLACK CASE.
LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
COOL BLOCKS® FINE TUNE YOUR BAND SAW
|
| Cool Blocks 14" Delta
...plus other(s)
|
THE HEAT AND FRICTION CAUSED BY METAL GUIDE BLOCKS ARE ELIMINATED WITH PATENTED OLSON® COOL BLOCKS®, WHICH REPLACE YOUR STANDARD UPPER AND LOWER BLADE GUIDES, ALLOWING BLADES TO RUN COOLER, QUIETER AND LAST LONGER - FOUR-PIECE SETS REQUIRE NO BAND SAW MODIFICATION:
CB50000 - DELTA® 14"
|
|
|
|
Machinery Accessories - Band Saws
|
BRETT-GUARD® BAND SAW GUARD ADDS SAFETY AND VISIBILITY TO YOUR WORK
|
| Brett Band Saw Guard, Delta 14"
...plus other(s)
|
BUILT-IN 120V LIGHT NOT ONLY ILLUMINATES THE CUTTING LINE BUT ALSO BRIGHTENS THE WORK AREA WHEN YOU USE THE BRETT-GUARD® BAND SAW GUARD, FROM HTC PRODUCTS:
GUARD MOUNTS AT AN ANGLE TO PREVENT INTERFERENCE WITH SAW GUIDE COMPONENTS. A SINGLE KNOB ADJUSTS THE CLEAR, PLEXIGLAS SHIELD. ATTACHED TO THE BLADE SUPPORT ARM, IT MOVES AS YOU ADJUST DEPTH OF CUT. A-100-4 FITS JET® 14" BANDSAWS. A-100-14 FITS DELTA® 14" BANDSAWS. MOUNTING BRACKET, POWER CORD, HARDWARE AND INSTRUCTIONS INCLUDED. SHIPPING WEIGHT 6 LBS.
|
|
|
|
Machinery Accessories - Band Saws
|
CERAMIC GUIDE BLOCKS AND BEARINGS IMPROVE BAND SAW PERFORMANCE
|
| Ceramic Guide Blocks For Delta 14"
...plus other(s)
|
GET COOLER, QUIETER BANDSAW OPERATION WITH ALUMINA-OXIDE SPACEAGE CERAMIC GUIDEBLOCKS® AND THRUST BEARINGS. FOUR-PIECE GUIDE BLOCK SETS HANDLE UPPER AND LOWER GUIDES AND WORK WITH ANY BLADE WIDTH:
108-443 SET FITS DELTA® 14" BAND SAWS (THREE 1/2" X 1/2" X 3/4" BLOCKS; ONE 1/2" X 3/8" X 1"). 108-737 SET IS DESIGNED FOR JET®, GRIZZLY®, OTHER IMPORTED 14" PLUS GENERAL 15" BAND SAWS (FOUR 1/2" X 1/2" X 3/4" BLOCKS). 126-461 TWO-PIECE THRUST BEARING SET (1-3/16 DIA. W/WASHERS) REPLACES DELTA®, JET®, GRIZZLY® AND OTHER IMPORTED 14" BAND SAW UPPER AND LOWER BEARINGS. INSTALLATION INSTRUCTIONS INCLUDED. LIFETIME MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Band Saws
|
DELTA® 14" BAND SAW RIP FENCES WITH RESAW POST
|
| Band Saw Rip Fence, 12" Rails
...plus other(s)
|
DELTA® BAND SAW RIP FENCES FIT ALL DELTA® 14" BAND SAWS AND INCLUDE GUIDE BARS AND MOUNTING HARDWARE:
RESAW POST WILL ADJUST TO BLADE SIZE. CAST IRON KNOB LOCKS FENCE INTO POSITION. EACH WEIGHS 12 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
ADD RIP FENCE ACCURACY TO YOUR DELTA® 14" BANDSAW
|
| Band Saw Rip Fence, 24" Rails
...plus other(s)
|
A GENUINE DELTA® MODEL 28-858 24" RIP FENCE MOUNTS DIRECTLY ONTO THE TABLE AND CAN BE THE MOST VALUABLE ACCESSORY YOU CAN ADD TO YOUR DELTA® 14" BANDSAW:
USE THE FENCE AND SAW TO PREPARE STOCK FOR TURNING, SPLIT DOWELS, RIP BEVELS, RIP EXTRA THICK STOCK, RESAW ACCURATELY AND MUCH MORE. INCLUDES STURDY ALUMINUM BODY, REMOVABLE PIVOT BAR FOR FREEHAND RESAWING, GUIDE RAILS AND MOUNTING HARDWARE. WEIGHS 15 LBS. 28-856 - HAVING SIMILAR FEATURES, THIS SMALLER DELTA® RIP FENCE (NOT SHOWN) IS 12" LONG BUT ALSO FITS 14" BANDSAWS. WEIGHS 12 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Band Saws
|
DOUBLE THE HEIGHT CAPACITY OF YOUR DELTA® 14" BANDSAW WITH A FACTORY BUILT ATTACHMENT
|
| Height Attachment/14" Bs
|
WHEN YOU ADD THE MODEL 28-984 HEIGHT ATTACHMENT TO YOUR DELTA® 14" BANDSAW, THE CAPACITY UNDER THE GUIDE INCREASES FROM 6-1/4" TO 12-1/4"!
GREAT FOR RESAWING, CUTTING ANGULAR PIECES LIKE CHAIR BACKS AND FOR CUTTING THICK CORBELS OR LOGS. INCLUDES CAST BLOCK, DOWELS AND BOLT, EXTENSION AND FRONT AND BACK BLADE GUARDS. WEIGHS 12 LBS. MUST BE USED WITH 105" BLADES.
|
|
|
|
Machinery Accessories - Band Saws
|
ZERO CLEARANCE TABLE INSERTS FOR DELTA® AND JET® BAND SAWS
|
| Zero Clearance Insert (yellow)
...plus other(s)
|
MADE OF 30% GLASS FILLED ABS PLASTIC FOR EXTREME DURABILITY AND RESILIENCY, ZERO CLEARANCE TABLE INSERTS HELP PROTECT BAND SAW BLADES IN CASE OF ACCIDENTAL CONTACT:
SPECIFICALLY DESIGNED TO FIT DELTA® AND JET 14" BAND SAWS. 2.49" DIA. X 3/32" THICK; KEEP SEVERAL ON HAND FOR USE WITH VARIOUS BLADES. A LOCATOR LINE MAKES IT EASY TO MAKE THE INITIAL CUT TO FIT THE DESIRED BLADE FOR PERFECT ZERO CLEARANCE CUTTING. SOLD IN PACKAGES OF FOUR - DELTA® INSERTS ARE YELLOW; JET® ARE WHITE.
|
|
|
|
Machinery Accessories - Band Saws
|
GET MORE PRECISION AND LONGER BAND SAW BLADE LIFE WITH AFFORDABLE BALL BEARING GUIDES
|
| Roller Guide Blocks, Delta 14"
...plus other(s)
|
BY REPLACING FACTORY BAND SAW BLADE GUIDES WITH THESE BALL BEARING GUIDES, YOU CAN IMPROVE PERFORMANCE AND INCREASE BLADE LIFE:
USE WITH 1/4" AND WIDER BLADES - VERY EASY TO INSTALL AND ADJUST. INCLUDES FOUR ALUMINUM BAR STOCK GUIDES, EACH WITH TWO DOUBLE SEALED, MICRO-PRECISION BALL BEARINGS. YOU'LL IMMEDIATELY NOTICE THAT THE BLADE CUTS STRAIGHTER AND WANDERS LESS, WHILE RUNNING COOLER. ON DELTA® BAND SAWS YOU CAN STILL TAKE ADVANTAGE OF THE FINE ADJUSTMENT SCREWS. USA.
|
|
|
|
Machinery Accessories - Drill Presses
|
TURN YOUR DRILL PRESS INTO A MORTISING MACHINE WITH A DELTA® MORTISING ATTACHMENT KIT
|
| 17-924 Mortising Kit
|
THE VERSATILE DELTA® MODEL 17-924 MORTISING ATTACHMENT KIT COMES WITH FOUR POPULAR MORTISING CHISEL AND BIT SETS PLUS A HANDY CARRYING CASE THAT HOLDS EVERYTHING FOR EASY STORAGE:
ATTACHES TO DRILL PRESS IN MINUTES WITHOUT THE NEED FOR INSTALLATION TOOLS. LARGE 4" CAPACITY UNDER HOLD DOWN - 2-3/4" CAPACITY FROM ENDS OF CLAMP RODS TO FENCE. COMES WITH 1/4" X 1/4", 5/16" X 5/16", 3/8" X 3/8" AND 1/2" X 1/2" HOLLOW CHISELS AND DRILL BITS, SPECIAL ALIGNMENT GAUGE FOR FAST, ACCURATE SET UPS, LARGE, CAST IRON FENCE ASSEMBLY, BUSHINGS, GUIDES, HEX WRENCH AND INSTRUCTIONS. FITS DRILL PRESSES WITH 38MM, 48MM, 50.8MM AND 66MM QUILL DIAMETERS, INCLUDING DELTA® MODELS 11-090, 11-980, 11-990, 14-040, 14-070, 17-900, 17-925 AND 17-965, PLUS SEARS® MODELS 21313, 21315 AND 21317. KIT WEIGHS 16 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
DELTA® DRILL PRESS SHIELD IS A HANDY WAY TO DEFLECT SHAVINGS
|
| Drill Press Shield
|
|
CLEAR PLASTIC SHIELD MOUNTS ONTO ANY DRILL PRESS WITH A 1-1/2 TO 3-11/16 DIA. COLUMN. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
WOODTEK MORTISING ATTACHMENT FOR DRILL PRESS
|
| Mortising Attachment For Wdtk Dp
|
THE WOODTEK® MORTISING ATTACHMENT INSTALLS EASILY AND ADDS A SIGNIFICANT CAPABILITY TO YOUR DRILL PRESS:
INCLUDES CAST IRON CHISEL HOLDER (CHISELS NOT INCLUDED), FENCE ASSEMBLY, BUSHINGS, GUIDES, COLLAR, STEEL RODS AND HARDWARE. IN ADDITION TO WOODTEK® 21" DRILL PRESSES, THE ATTACHMENT FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS. 11-1/4 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Grinders
|
TRU-GRIND SHARPENING SYSTEM
|
| Tru-grind Sharpening System
...plus other(s)
|
THE WOODCUT® TRU-GRIND SHARPENING SYSTEM IS A COMPACT WELL DESIGNED SYSTEM THAT WILL SHARPEN A FULL RANGE OF WOODTURNING TOOLS FROM BOWL GOUGES TO SKEW CHISELS. THE SYSTEM INCLUDES THE TRU-GRIND TOOL HOLDER, TRU-GRIND BASE SLIDE, INSTRUCTIONAL DVD AND BOOKLET DESCRIBING SET UP AND USE. AN OPTIONAL STURDY REST MAKES SHARPENING SCRAPERS AND OTHER TOOLS FASTER AND EASY:
THE ADJUSTABLE BASE SLIDE IS FIRST MOUNTED UNDER THE LEFT GRINDING WHEEL BASE WILL FIT UNDER RIGHT SIDE OF A BENCH GRINDER BY SIMPLY UNBOLTING AND REPOSITIONING THE SLIDE ON THE BASE PLATE. THE TOOL HOLDER IS THEN HELD INTO THE PIVOTING CUP ON THE END OF THE BASE SLIDE AND IS USED FOR SHARPENING GOUGES, SCRAPERS AND CHISELS. TOOLS UP TO 1-1/2" WIDE ARE SECURELY LOCKED INTO THE TOOL HOLDER USING THE TOP MOUNTED BRASS TIGHTENING KNOB. THE TOOL HOLDER HAS A DUAL PIVOTING DESIGN WITH SEVERAL NOTCHED LOCKING POSITIONS FOR COMMONLY USED ANGLES. OPTIONAL RIGHT AND LEFT STURDY RESTS BOLT ONTO EXISTING BASE SLIDES AND CAN BE PIVOTED OUT OF THE WAY WHEN NOT IN USE. OPTIONAL RIGHT AND LEFT BASE SLIDES ARE AVAILABLE AND COME PRE-POSITIONED TO FIT UNDER EITHER SIDE OF THE BENCH GRINDER. A FULLY OUTFITTED BENCH GRINDER SHARPENING SYSTEM WOULD INCLUDE A TRU-GRIND SHARPENING SYSTEM (TOOL HOLDER AND BASE SLIDE), AN ADDITIONAL BASE SLIDE AND A STURDY REST. NEW ZEALAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
DELTA BENCH GRINDERS - GR-275. DEWALT BENCH GRINDERS - 114-161. STEEL CITY BENCH GRINDERS - 015-420. CGW GRINDING WHEELS - 105-677. NORTON GRINDING WHEELS - 138-860. PACIFIC GRINDING WHEELS - 106-856. DIAMOND WHEEL DRESSER - 110-849. WHEEL DRESSING STICK - 145-001.
|
|
|
|
Machinery Accessories - Grinders
|
DELTA® WET/DRY SHARPENING CENTER
|
| 8" 1000 Grit Repl Wheel
...plus other(s)
|
|
|
|
Machinery Accessories - Grinders
|
ONEWAY SHARPENING SYSTEM
|
| Wolverine Grinding Jig
...plus other(s)
|
THE ONEWAY SHARPENING SYSTEM INCLUDES THE WOLVERINE GRINDING JIG, SKEW GRINDING JIG, VARI-GRIND JIGS AND DIAMOND DRESSING JIG:
THE WOLVERINE GRINDING JIG WILL SHARPEN GOUGES, SCRAPERS, CHISELS AND PARTING TOOLS IN A SLIDING POCKET VEE-ARM AND PLATFORM MOUNT. INCLUDES TWO WOLVERINE BASES, A 3" X 5" PLATFORM MOUNT AND A 28" LONG SLIDING POCKET VEE-ARM.
THE SKEW GRINDING JIG IS DESIGNED SPECIFICALLY FOR SHARPENING SKEW CHISELS. IT FEATURES A TWO POCKET VEE-ARM WITH OFFSET POCKETS 3-1/2" ON EITHER SIDE TO PERFECTLY ALIGN THE SKEW CHISEL FACE WITH THE GRINDING WHEEL SURFACE. REQUIRES WOLVERINE BASE.
THE VARI-GRIND JIGS ARE DESIGNED TO ACCURATELY PRODUCE AND MAINTAIN TRADITIONAL FINGERNAILS AND SIDE GRINDS ON BOWL AND SPINDLE GOUGES. THE ORIGINAL VARI-GRIND JIG WILL HOLD GOUGES UP TO 5/8" IN DIAMETER AND HAS A FREE-HAND PIVOTING POINT - REQUIRES WOLVERINE JIG FOR OPERATION. THE VARI-GRIND 2 JIG WILL HOLD GOUGES UP TO 3/4" IN DIAMETER AND HAS A FIXED PIVOTING SYSTEM - REQUIRES WOLVERINE JIG OR WOLVERINE BASE ALONE FOR OPERATION.
THE DIAMOND DRESSING JIG IS USED FOR DRESSING GRINDING WHEELS. A FINE ADJUSTMENT KNOB POSITIONS THE 1/4 CARAT DIAMOND IN RELATION TO THE GRINDING WHEEL FOR PRECISION DRESSING.
THE ONEWAY SHARPENING SYSTEM COMPLETE INCLUDES THE WOLVERINE GRINDING JIG, SKEW GRINDING JIG, VARI-GRIND 2 JIG (W/O BASE) AND DIAMOND DRESSING JIG.
ADDITIONAL PLATFORM TABLES AND WOLVERINE BASES ARE AVAILABLE. COMPLETE INSTRUCTIONS INCLUDED WITH ALL JIGS. FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
DELTA BENCH GRINDERS - GR-275. DEWALT BENCH GRINDERS - 114-161. STEEL CITY BENCH GRINDERS - 015-420. CGW GRINDING WHEELS - 105-677. NORTON GRINDING WHEELS - 138-860. PACIFIC GRINDING WHEELS - 106-856. DIAMOND WHEEL DRESSER - 110-849. WHEEL DRESSING STICK - 145-001.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
WOODTEK 6 AND 8" JOINTERR SPIRAL CUTTERHEAD
|
| 6" Replacement Spiral Cutterhead
...plus other(s)
|
WOODTEK® 6" AND 8" INDEXABLE JOINTER HEADS FEATURE SEPARATE CARBIDE CUTTERS, EACH WITH FOUR USABLE SIDES:
0.550" X 0.550" CUTTERS CAN BE INDIVIDUALLY ROTATED IF ONE SIDE BECOMES DAMAGED, EXTENDING JOINTER HEAD LIFE AND ENSURING SHARPER CUTS. UNIQUE SPIRAL DESIGN MEANS LESS NOISE THAN CONVENTIONAL PLANERS, SMALLER CHIPS TO EASE DUST COLLECTION AND SMOOTH, ALMOST FINISH QUALITY, SURFACES. 120-041 - 6" HEADS HAVE 42 CARBIDE CUTTERS, WEIGH 10 LBS., AND FIT WOODTEK®, DELTA® PROFESSIONAL AND DELUXE SERIES AND SELECT JET® AND POWERMATIC® 6" JOINTERS. 120-044 - 8" HEADS HAVE 54 CARBIDE CUTTERS, WEIGH 16 LBS., AND FIT WOODTEK® 8" JOINTERS; DO NOT FIT DELTA® PROFESSIONAL SERIES AND DJ-20 8" JOINTERS. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
