|
|
|
Sawblades - Circular
|
DELTA® PREMIUM CIRCULAR SAWBLADES REDUCE SPLINTERING AND TEAROUT DRAMATICALLY
|
| 10" X 50t X .118" X +15 Deg Combo Blade
...plus other(s)
|
DELTA® PREMIUM SAWBLADES ARE DESIGNED AND MANUFACTURED TO EXACTING TOLERANCES TO MEET THE REQUIREMENTS OF PROFESSIONAL WOODWORKERS:
LARGE C4 MICROGRAIN CARBIDE TEETH ARE PRECISION GROUND USING FINE GRIT DIAMOND WHEELS; EXTRA HARD CARBIDE ENSURES THAT CUTTING EDGES STAY SHARP. HEAVY GAUGE, LASER CUT HARDENED AND TEMPERED STEEL PLATE IS PRECISION BALANCED FOR ACCURATE CUTS, PRODUCING TIGHT JOINTS. LASER CUT EXPANSION SLOTS MINIMIZE NOISE AND EDGE VIBRATION FOR EXCELLENT SURFACE FINISH.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
SAWBLADE STABILIZERS - 147-751.
|
|
|
|
Sawblades - Circular
|
DELTA 8" STACK DADO + OLDHAM WOBBLE DADO
|
| Delta 8" Stack Dado + Oldham Wobble Dado
...plus other(s)
|
DELTA® 35-7670 8" STACK DADO COMES STANDARD WITH ALL OF THE CHIPPERS NEEDED FOR PLYWOOD AND SOLID-WOOD CONSTRUCTION:
HEAVY GAUGE, LASER CUT PLATES PROVIDE TRUE, ACCURATE CUTS - 5/8" ARBOR. OUTER BLADES ARE 1/8" THICK AND HAVE 24 TEETH. CHIPPERS INCLUDE FOUR, FOUR WING 1/8", ONE 3/32" AND 1/16" BLADES. ALL HAVE A -12° HOOK TO HELP CONTROL TEAR OUT AND PROVIDE FOR SAFER OPERATION IN RADIAL ARM SAW APPLICATIONS. MICRO-GRAIN CARBIDE TEETH DELIVER CLEAN CUTS AND REDUCE SPLINTERING. 12 STAINLESS STEEL SHIMS ALLOW FOR ULTRA-FINE WIDTH ADJUSTMENTS. HEAVY DUTY STORAGE CASE PROTECTS BLADES AGAINST CHIPPED TEETH AND DAMAGE. 5 LBS. NET WEIGHT; 10 LBS. SHIPPING WEIGHT. IMPORTED. NOTE: NOT FOR USE ON HAND HELD SAWS.
|
|
|
|
Portable Power Tools Electric - Detail Sanders
|
PROXXON SANDERS PERFORM WHERE CONVENTIONAL SANDERS CAN'T REACH
|
| Proxxon Detail Sander
...plus other(s)
|
WITH ITS UNIQUE OSCILLATING MOTION, THE PROXXON 38520 DELTA DETAIL SANDER GREATLY REDUCES VIBRATION AND KICKBACK AND ALSO ALLOWS THE USE OF ACCESSORIES, INCLUDING CUTTING BLADES:
115V, 3,000-10,000 OSCILLATIONS PER MINUTE VARIABLE SPEED MOTOR. DIE CAST ZINC HEAD - 2.5" X 2.5" X 2.5" TRIANGULAR SANDING AREA USES HOOK & LOOP PADS. INCLUDES TWO 80 GRIT AND TWO 280 GRIT SANDING PADS, SANDING FLEECE, HARD AND SOFT FELT POLISHERS AND STORAGE CASE. 9" LONG; WEIGHS 1.4 LB. 28904 2" X 2.75" SPRING STEEL, FLEXIBLE SCRAPER IS SUITABLE FOR PAINT, TILE ADHESIVE, SILICONE AND TAR REMOVAL. 28888 REPLACEMENT POLISHING SET INCLUDES SANDING FLEECE AND ONE HARD AND ONE SOFT FELT POLISHER - USE TO PUT HIGH GLOSS ON STAINLESS STEEL, PRECIOUS METALS AND PAINT. 28900 2.5" DIA. HSS CUTTING BLADE IS SEMI-CIRCULAR FOR CUTTING INTO CORNERS. CUTS METAL, WOOD (MODEL BUILDING AND HOUSE DECOR) AND OTHER MATERIALS.
FOR SHAPE FINISHING, MORTISING AND FINE POLISHING, THE PROXXON 38536 BELT SANDER FEATURES A DIE CAST ALUMINUM HEAD, HOLDING THE SANDING ARM, WHICH CAN BE SWIVELED THROUGH 60°:
115V, 985-2,300 FPM VARIABLE SPEED MOTOR - 13"L X 13/32"W BELT. SANDING BELT CAN BE CHANGED IN A MATTER OF SECONDS. ALSO SUITABLE FOR DEBURRING METAL, PAINT REMOVAL AND FINE FINISHING. INCLUDES TWO, 100 GRIT, AND TWO, 240 GRIT, BELTS AND CARRYING CASE. 13" LONG; WEIGHS 1.4 LBS. GERMANY.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
BIESEMEYER® STOPS FOR EVERY SAWING NEED
|
| T-square Cut-off Stop
...plus other(s)
|
BIESEMEYER® STOPS HAVE BEEN DESIGNED TO FIT AND PROVIDE GREATER ACCURACY FOR ANY RADIAL ARM, MITER SAW OR SLIDE SAW FENCE SYSTEM WITH A 1-5/8" HIGH FENCE:
78-989 - T-SQUARE® DUAL POINTER CUT-OFF SAW STOPS ARE PRECISE TO 1/64" AND ARE THE SIMPLEST WAY TO ELIMINATE C-CLAMPS OR SCRAPS OF WOOD FROM YOUR CROSSCUTTING STATION. DUAL HAIRLINE POINTERS (PRECISE TO 1/64") LET YOU WORK ON EITHER SIDE OF THE BLADE. 78-992 - T-SQUARE® DUAL POINTER FLIP STOPS ARE A GOOD CHOICE FOR REPETITIVE CUTTING OPERATIONS. STOPS FLIP OUT OF THE WAY AND CAN BE GANGED AS CLOSE AS 4-1/2" ALONG THE FENCE. 78-987 - 5-1/2" WIDE T-SQUARE® CUT-OFF GANG STOPS ARE FOR 12" WIDE TABLES. 78-988 - 10" WIDE T-SQUARE® CUT-OFF GANG STOPS ARE FOR 16" WIDE TABLES. SINGLE HAIRLINE POINTERS. GANG STOPS LET YOU CUT SEVERAL PIECES OF MATERIAL UP TO THE FULL WIDTH OF YOUR TABLE. 78-990, 78-994 - OUTSIDE/CUT-OFF MITER STOPS ARE FOR PRECISE CUTTING TO THE OUTSIDE OF THE MITER WHILE INSIDE/CUT-OFF MITER STOPS ARE FOR CUTTING TO THE INSIDE OF THE MITER. BOTH HAVE DUAL POINTERS.
|
|
|
|
Portable Power Tool Accessories - Bench Top Machinery
|
BIESEMEYER® T-SQUARE® MITER SAW TABLE SYSTEMS MAKE POWER MITER SAWS MORE ACCURATE AND PRODUCTIVE
|
| 2' Mitersaw Table
...plus other(s)
|
DESIGNED TO FIT EITHER THE LEFT OR RIGHT SIDE, BIESEMEYER® MITER SAW TABLE SYSTEMS FIT MOST 10" AND 12" MITER SAWS, 10" SLIDING COMPOUND MITER SAWS AND 12" RADIAL ARM SAWS:
TABLES ARE 3/4" LAMINATED PARTICLE BOARD, EDGED WITH BLACK T-MOLDING. BUILT-IN SLOT ELIMINATES SAWDUST BUILDUP; FRAME IS WELDED STEEL. FOR A COMPLETE SYSTEM ORDER TWO TABLES.
78-802 - 2'L X 5-1/2"W TABLE FOR 10" MITER SAWS. 78-804 - 4'L X 5-1/2"W TABLE FOR 10" MITER SAWS. 78-806 - 6'L X 5-1/2"W TABLE FOR 10" MITER SAWS. 79-803 - 3'L X 10"W TABLE FOR 12" SAWS AND 10" SLIDE SAWS. 79-804 - 4'L X 10"W TABLE FOR 12" SAWS AND 10" SLIDE SAWS. 79-806 - 6'L X 10"W TABLE FOR 12" SAWS AND 10" SLIDE SAWS.
78-989 - OPTIONAL BIESEMEYER® T-SQUARE® DUAL POINTER CUT OFF SAW STOP IS PRECISE TO 1/64".
|
|
|
|
Machinery - Table Saws
|
DELTA® UNISAW® THE NEXT GENERATION
TRULY A "WHOLE SYSTEM DESIGN" MACHINE WITH UNBEATABLE ACCURACY
|
| New Unisaw Lt 3hp 1ph 36" Fence
...plus other(s)
|
MASSIVE TRUNNION FOR DEPENDABLE REPEATABLE UNWAVERING PRECISION. RE-POSITIONED ARBOR FOR 15" TABLE SPACE IN FRONT OF BLADE. MADE IN THE USA CAST IRON TABLE AND WINGS ARE MACHINED BEAUTIFULLY. BIESEMEYER® FENCE IS SQUARE TO TABLE AND PARALLEL FACE-TO-FACE. MADE IN THE USA MARATHON® MOTOR IS A DEPENDABLE POWERHOUSE. DUAL HEIGHT RIVING KNIFE FOR THROUGH-CUT AND KERF-CUT. GUARD DESIGNED AND BUILT TO MEET UL® 2010 BLADE GUARD REGULATIONS. RE-DESIGNED GUARD WORKS WELL IN CROSS CUT AND RIP APPLICATIONS. NOTCHED GUARD SUPPORT AND SEE THROUGH GUARD MAKE CUT LINE VISIBLE. EXTRA-WIDE TABLE OPENING AND ARBOR LOCK FOR EASY BLADE CHANGES. ARBOR AND BLADE FLANGE MACHINED FROM SOLID STOCK FOR ZERO RUNOUT. NEW ARBOR NUT HAS BLADE STABILIZER AND LARGE FINGER HOLD AREA. FRONT MOUNTED HAND WHEELS, BOTH DEPTH OF CUT AND BLADE TILT. EASY TO READ BEVEL GAUGE CLOSED TO CABINET FOR BETTER DUST COLLECTION. EURO STYLE BLADE SHROUD DUST COLLECTION CAPTURES DUST AT THE SOURCE. BLADE SHROUD AND BASE CABINET DUST PORTS FOR EFFICIENT DUST COLLECTION. STORAGE DRAWER WITH NESTED SPOTS FOR BLADES, DADO, AND ACCESSORIES. CAST IRON BASE ADDS MASS TO MACHINE AND DIMENSION TO FOOTPRINT. STEEL REINFORCED TABLE BOARD WILL REMAIN FLAT THROUGH YEARS OF USE. PREMIUM DELTA® 50 TOOTH CARBIDE BLADE MADE IN USA. MADE IN USA OF US AND FOREIGN COMPONENTS.
|
|
|
|
Machinery - Stock Feeders
|
DELTA® PRODUCTION STOCK FEEDERS ENSURE POSITIVE FEEDING OF ALL TYPES OF MATERIALS
|
| 4speed,3roller Stk Feeder
...plus other(s)
|
DELTA® PRODUCTION STOCK FEEDERS OFFER CONTINUOUS DUTY MOTORS THAT POWER LUBRICATED GEAR BOXES, TRANSMITTING POWER TO ROLLER CHAINS AND SPROCKETS THAT DRIVE FEED ROLLERS. FEEDERS COME WITH STURDY VERTICAL AND HORIZONTAL SUPPORT COLUMNS AND UNIVERSAL JOINTS WITH "T" OR "L" LOCKING MECHANISMS FOR SECURING FEEDERS INTO HORIZONTAL, VERTICAL OR ANGLE FEED POSITIONS. LARGE HANDWHEELS MOVE FEEDERS HORIZONTALLY OR VERTICALLY ALONG COLUMNS. FOUR BOLTS HOLD VERTICAL SUPPORT COLUMN TO TABLE SURFACE:
36-850 - 4 SPEED, 3 ROLLER STOCK FEEDER: 1/4HP, 120V, 1PH REVERSING MOTOR. 14 OR 63 FPM SPEEDS BY SWITCHING GEARS; 26 OR 33 FPM SPEEDS BY INSERTING SECOND SET OF GEARS. RANGE OF ADJUSTMENT: 11-1/4" TO 16" VERTICAL; 5" TO 14-3/4" HORIZONTAL. INCLUDES POWER CORD AND PLUG, SPEED CHANGING GEARS, LUBRICATING GUN AND COMPLETE INSTRUCTIONS. 13-1/2"H X 8-1/2"W X 12"L. WEIGHS 70 LBS.
36-851 - 4 SPEED, 3 ROLLER STOCK FEEDER: 1HP, 240V, 1PH, TWO SPEED REVERSING MOTOR. 13 OR 26 FPM SPEEDS BY SWITCHING FROM "LOW" TO "HIGH"; REVERSE GEARS FOR 36 OR 72 FPM SPEEDS. RANGE OF ADJUSTMENT: 12" TO 21-1/2" VERTICAL; 7-3/4" TO 25" HORIZONTAL. INCLUDES POWER CORD, LUBRICATING GUN AND COMPLETE INSTRUCTIONS. 18-1/2"H X 11-1/2"W X 18"L. WEIGHS 133 LBS.
36-852 - 4 SPEED, 3 ROLLER STOCK FEEDER: SAME AS MODEL 36-851 BUT WITH 1HP, 230V, 3PH MOTOR. LIMITED TO QUANTITIES ON HAND.
36-855 - 8 SPEED, 4 ROLLER STOCK FEEDER: 1HP, 240V, 1PH, TWO SPEED REVERSING MOTOR. EIGHT SPEEDS (6.5, 13, 18, 22, 36, 43, 55, 108 FPM) ATTAINED BY ALTERNATING MOTOR SWITCH, GEAR LEVER AND BY REVERSING GEARS. RANGE OF ADJUSTMENT: 12" TO 21-1/2" VERTICAL; 7-3/4" TO 25" HORIZONTAL. INCLUDES POWER CORD, TWO SPEED GEAR LEVER, LUBRICATING GUN AND COMPLETE INSTRUCTIONS. 18-1/2"H X 11-1/2"W X 23-1/2"L. WEIGHS 148 LBS.
TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Scroll Saws
|
DELTA® 20" VARIABLE SPEED SCROLL SAW IS LOADED WITH FEATURES
|
| 20" Variable Speed Scroll Saw
|
DELTA'S VERY FIRST PRODUCT WAS A SMALL HAND-CRANK SCROLL SAW BACK IN THE 1920S. NOW DELTA IS RETURNING TO ITS ROOTS WITH THE 40-690 20" VARIABLE SPEED SCROLL SAW. IT'S LOADED WITH FEATURES, AND BACKED BY DELTA'S 5-YEAR WARRANTY.
DUAL PARALLEL-LINK ARM INCREASES ACCURACY BY KEEPING THE BLADE PERPENDICULAR TO THE TABLE AND REDUCING VIBRATION AND NOISE. TOOL FREE BLADE CLAMP ALLOWS THE BLADE TO BE CHANGED IN SECONDS. UP-FRONT CONTROLS GIVE THE USER CONVENIENT ACCESS TO ON/OFF SWITCH, SPEED CONTROL, AND BLADE TENSIONING LEVER. ELECTRONIC VARIABLE SPEED CAN BE ADJUSTED FROM 400-1,750 SPM FOR A WIDE ARRAY OF CUTTING APPLICATIONS. OVERSIZED WOODWORKER'S TABLE PROVIDES EXCELLENT MATERIAL SUPPORT AND BEVELS 0°-45° LEFT AND RIGHT. FLEXIBLE WORK LIGHT ILLUMINATES THE WORK SURFACE FOR BETTER VISIBILITY. HEAVY-DUTY ALL-METAL STAND PROVIDES A SOLID WORKSTATION FOR THE SAW AND KEEPS WORK BENCHES CLEAR FOR OTHER USES. MACHINE STAND, WORK LIGHT, AND TWO BLADES INCLUDED. 5-YEAR WARRANTY.
|
|
|
|
Machinery - Sanders
|
DELTA® INDUSTRIAL 6" BELT/12" DISC FINISHING MACHINE DOES DOUBLE DUTY
|
| 6" Belt/12" Disc Sander, 1.5hp 1ph
...plus other(s)
|
WITH A POWERFUL 1-1/2 HP, 240V, 1PH, 3,450 RPM MOTOR, THE DELTA® MODEL 31-735A DISC FINISHING MACHINE FEATURES A 3,000 SFPM 6" X 48" SANDING BELT AND 2,100 RPM 12" SANDING DISC - THE COMBINATION CAN HANDLE 90 TO 95% OF YOUR FINISHING OPERATIONS:
7-1/2" X 15" BELT TABLE AND 12" X 16-1/2" DISC TABLE TILT 45°. FINE THREAD ADJUSTMENT FOR EASY BELT TRACKING; STAR WHEEL LOCKS ADJUSTMENT FIRMLY IN PLACE. POWER TAKE-OFF SPINDLE FOR MOUNTING ACCESSORIES. LOCKABLE ON/OFF SWITCH. INTEGRATED DUST COLLECTION - 4" DIA. DUST PORT. INCLUDES ENCLOSED STAND, 4-1/2" ARBOR PULLEY AND GUARD, V-BELT, 80 GRIT BELT, 50 GRIT DISC, WRENCH AND INSTRUCTION MANUAL. 58"H X 35"W X 21"D. 350 LBS. NET WEIGHT; 386 LBS SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Sanders
|
DELTA® 31-396 6" X 108" OSCILLATING EDGE SANDER IDEAL FOR IRREGULAR SHAPES
|
| 6"x108" Oscillating Edge Sander
|
WITH A POWERFUL 3HP, 220V, 1PH, 1,720 RPM MOTOR, THE DELTA® MODEL 31-396 OSCILLATING EDGE SANDER FEATURES A 3,150 SFPM SANDING BELT THAT OSCILLATES 3/4":
12" X 35-3/8" CAST IRON FRONT TABLE MOVES UP 3-1/2", DOWN, FORWARD 4-3/4" AND BACK - PLATEN TILTS 0-90°. 8-7/8" X 11-3/8" AUXILIARY TABLE. SPINDLE SANDING KIT INCLUDES 1-1/2", 2" AND 3" DIA. X 4-1/2" LONG DRUMS FOR CONTOUR SANDING. COMES WITH ENCLOSED STAND, 4" DIA. DUST COLLECTION CHUTE, STEEL FENCE, MITER GAUGE, HEX WRENCH, HARDWARE AND INSTRUCTION MANUAL. 47-3/4"H X 27-1/2"W X 60-5/8"L. 480 LBS. NET WEIGHT; 500 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Sanders
|
DELTA® INDUSTRIAL 6" BELT/12" DISC SANDING CENTER™ DOES DOUBLE DUTY
|
| 6" X 48" Belt / 12" Disc Sanding Center
...plus other(s)
|
ALONG WITH ITS POWERFUL 1-1/2 HP, 120/240V, 1PH MOTOR, THE DELTA® INDUSTRIAL MODEL 31-300 SANDING CENTER™ FEATURES A 3,000 SFPM 6" X 48" SANDING BELT AND 2,100 RPM 12" SANDING DISC TO HANDLE 90-95% OF YOUR FINISHING OPERATIONS:
BELT CAN BE USED VERTICALLY, HORIZONTALLY OR AT ANY ANGLE IN BETWEEN - STAR WHEEL, ECCENTRIC BELT TRACKING CONTROL PLUS CAM LOCK BELT TENSIONING LEVER. MACHINED AND BALANCED CAST IRON SANDING DISC PROVIDES VIBRATION FREE OPERATION. CAST IRON 7-1/2" X 15" BELT TABLE AND 12" X 16-1/2" DISC TABLES TILT 45°, UP AND DOWN. MILLED TABLE SLOTS PERMIT MITER GAUGE (NOT INCLUDED) USE FOR ACCURATE STRAIGHT AND ANGLE SANDING. POWER TAKE-OFF SPINDLE HANDLES PNEUMATIC SANDING DRUMS, ABRASIVE FLAP WHEELS, BUFFING WHEELS OR OTHER ACCESSORIES. SANDING CENTER™ COMES WITH LOCKABLE ON/OFF TOGGLE SWITCH, STEEL STAND, 4" DUST COLLECTOR PORT, SLIDING PIVOT PIN FOR CIRCLE SANDING, 80 GRIT ABRASIVE BELT, 50 GRIT PRESSURE SENSITIVE ADHESIVE ABRASIVE DISC, WRENCH AND INSTRUCTION MANUAL. 58"H X 31"W X 19"D. 290 LBS. NET WEIGHT; 298 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Sanders
|
DELTA® X5™ 18" X 36" DRUM SANDER BRINGS PANEL SANDING CAPACITY TO SMALL SHOPS
|
| X5 18" X 36" Drum Sander, 1-1/2hp
|
|
SAND PANELS UP TO 18" WIDE IN JUST ONE PASS OR UP TO 36" WIDE IN TWO. SIDE-TO-SIDE PARALLELISM IS ENSURED BY A HEAVY-DUTY, WELDED C FRAME AND AN ADJUSTABLE, FOUR-POSITION TABLE-RAISING MECHANISM. TWO-SPEED (2,210 & 3,300 RPM) STATIONARY DRUM LETS YOU QUICKLY SIZE STOCK OR MAKE SMOOTH FINISH PASSES. VARIABLE SPEED CONVEYOR (1-12 FPM) LETS YOU FINE TUNE SURFACE QUALITY. 1-1/2HP, 120V MOTOR AND POLY-V BELT DELIVER FULL POWER TO THE MACHINED ALUMINUM SANDING DRUM. ENCLOSED BASE WITH INTERNAL STORAGE HAS ADJUSTABLE FEET FOR VIBRATION-FREE OPERATION. 48"H X 28-1/2"W X 24-1/2"L. FIVE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Mortisers
|
DELTA® HOLLOW CHISEL MORTISER INCLUDES CHISELS AND BITS
|
| Deluxe Mortising Machine
...plus other(s)
|
HEAVY, CAST IRON AND STEEL FOR RIGIDITY AND STABILITY, THE DELTA® INDUSTRIAL MODEL 14-651 DELUXE MORTISER COMES WITH 1/4", 5/16", 3/8" AND 1/2" DELTA® CHISELS AND BITS:
120VAC, 1/2 HP, 4.8A, 1PH, 1,750 RPM INDUCTION MOTOR - 3/8" CHUCK WITH KEY. 5" MAXIMUM STROKE; UNIQUE, GAS-FILLED HEAD STABILIZER. 9-3/8" UNDER HEAD TO BASE, 3-3/4" UNDER HOLDDOWN. INCLUDED RISER BLOCK ADDS 1-3/4" CAPACITY UNDER HEAD. EASY, OPEN ACCESS TO DRILL CHUCK FOR BIT CHANGING. 12-1/4" X 8-1/4" CAST IRON TABLE WITH THROUGH HOLE; 16-1/4" X 13-1/2" BASE. RACK & PINION ADJUSTABLE 2-15/16" X 5-13/16" FENCE (EACH SIDE), 13-5/8" OVERALL. MORTISING HEAD CAN TURN 180° FOR OFF TABLE MORTISING. MULTI-POSITION FEED LEVER. PRE-DRILLED BASE FOR BENCH MOUNTING. TOOL AND CHISEL TRAY AND INSTRUCTION MANUAL INCLUDED. 30"H X 13-1/2"W X 16-1/4"D OVERALL. NET WEIGHT 55 LBS.; 77 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
REPLACEMENT MORTISE CHISELS HAVE 5/8" CHISEL SHANKS: 17-908 - 1/4" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-909 - 5/16" MORTISE, 1-7/8" CUT DEPTH; 4-1/4"L CHISEL, 6-1/8"L BIT. 17-910 - 3/8" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT. 17-911 - 1/2" MORTISE, 3" CUT DEPTH; 5-1/2"L CHISEL, 7-1/8"L BIT.
|
|
|
|
Machinery - Lathes
|
DELTA® 12" MIDI-LATHES
|
| Delta 12" 5-spd Midi Lathe, 3/4hp
...plus other(s)
|
DESIGNED FOR TURNING BOWLS AS WELL AS PENS, SPINDLES AND BOXES, THE NEW DELTA® 12" MIDI-LATHES NOW HAVE ENOUGH THE HORSEPOWER, SWING AND BELT GRIP FOR MOST TYPES OF WOODTURNING. TWO MODELS ARE AVAILABLE: 3/4HP, 5-SPEED MODEL 46-455 AND THE 1HP, VARIABLE SPEED MODEL 46-460. THESE ARE THE FIRST MIDI LATHES TO OFFER BOTH FORWARD AND REVERSE DRIVE ROTATIONS THROUGH A REVERSIBLE DC DRIVE. FEATURES INCLUDE ALL CAST IRON CONSTRUCTION, 6-GROOVE POLY-V BELT DRIVE, LOCKING FACEPLATE FOR REVERSE SANDING OPERATIONS AND A PATENTED QUICK-CHANGE BELT TENSIONING SYSTEM:
LATHE INCLUDES 6" AND 10" TOOL RESTS, 3" FACE PLATE, SPUR DRIVE, LIVE CENTER, KNOCKOUT ROD, FACEPLATE WRENCH AND INSTRUCTION MANUAL. OPTIONAL 25-1/2" BED EXTENSION BRINGS DISTANCE BETWEEN CENTERS TO 42". TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
DELTA® 46-455 LATHE. MOTOR: 3/4 HP, 115VAC, 1PH. FIVE SPEEDS: 500, 950, 1240, 1,550, 2,700, 4,000 RPM.
DELTA® 46-460 LATHE. MOTOR: 1 HP, 115VAC, 1PH. VARIABLE SPEED RANGES (3): 250-700, 600-1,800, 1,350-4,000.
SPECIFICATIONS:
SWING OVER BED - 12-1/2" (9-1/2" OVER BASE). DISTANCE BETWEEN CENTERS - 16-1/2" (42" W/BED EXTENSION). HEADSTOCK SHAFT: 1"-8TPI, #2MT, 15/32" BORE. INDEXING - 24 POINT. TAILSTOCK QUILL: 2-1/4" TRAVEL, #2MT, 13/32" BORE. NET WEIGHT - 97 LBS. OVERALL DIMENSIONS - 36"W X 11"D X 17-3/4"H.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
DELTA LIVE CENTER SYSTEM - 46-490. HIGH SPEED STEEL TURNING TOOLS - 142-607. POWDER METAL TURNING TOOLS - 137-093. CARBON STEEL TURNING TOOLS - 873-826. ONEWAY TALON CHUCK - 959-627. NOVA G3 CHUCK - 962-546. WOODCUT BOWL SAVER - 140-504. VEGA MIDI LATHE DUPLICATOR - 139-424.
|
|
|
|
Machinery - Jointers & Planers
|
DELTA X5™ 15" PLANER COMES WITH DELUXE STAND
|
| X5 15" Planer W/free Mobile Base
|
THE DELTA X5™ MODEL 22-780X 15" PLANER, WITH ITS MOTOR ON TOP, SAVES TIME BY ELIMINATING THE NEED TO MOVE INFEED AND OUTFEED ROLLERS EVERY TIME YOU MAKE A CUT:
240V, 3HP, 1PH MOTOR. 5,000 RPM, 15,000 CPM THREE KNIFE (3" DIA.) CUTTERHEAD - 16 OR 30 FPM FEED RATE. CAPACITY: 15" WIDE X 6-1/2" THICK - 1/8" MAXIMUM CUT DEPTH. 15" X 19-3/8" TABLE. INCLUDES DELUXE STAND, DUST CHUTE, 2" DIA. SERRATED INFEED AND POLYURETHANE OUTFEED ROLLERS, ANTI-KICKBACK FINGERS, CAST IRON TABLE WITH ADJUSTABLE BED ROLLERS, KNIFE SETTING GAGE AND INSTRUCTIONS. 26-1/2"H (48" WITH STAND) X 28"D X 20-1/2"W. NET WEIGHT 340 LBS.; 511 LBS. SHIPPING WEIGHT 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Jointers & Planers
|
DELTA® 13" PORTABLE PLANER FEATURES A CUTTERHEAD DESIGNED TO PRODUCE AN ULTRA SMOOTH FINISH
|
| 13" Portable Planer, 3-knife Cutterhead
...plus other(s)
|
|
DELTA® 13" PORTABLE PLANER FEATURES A 3 KNIFE CUTTERHEAD FOR MORE CUTS PER INCH AND IMPROVED SURFACE QUALITY. THE CUTTERHEAD IS DESIGNED TO EXTEND BLADE LIFE AND HAS A PATENTED LOCK SYSTEM TO HELP CONTROL SNIPE. A MICRO-ADJUST DEPTH STOP WITH A RANGE FROM 1/8" TO 1-1/4" ALLOWS THE USER TO SET AND ACCURATELY RETURN TO A DESIRED THICKNESS. A FULL WIDTH MATERIAL REMOVAL GAUGE INDICATES THE AMOUNT OF MATERIAL BEING REMOVED WITH EACH PASS. HSS INDEXED, DOUBLE-SIDED KNIVES REGISTER IN PLACE FOR EASY BLADE CHANGES. A15 AMP 120V MOTOR PROVIDES PLENTY OF POWER FOR EVEN THE MOST DEMANDING HARDWOODS. INCLUDES CUTTERHEAD WRENCH, KNIFE MAGNET, CHIP CHUTE AND OWNER'S MANUAL. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED. MOTOR: 15 A, 120V, 1 PHASE, 60 HZ SWITCH: MECHANICAL W/OVERSIZED PADDLE CUTTERHEAD DIAMETER: 2" NUMBER OF KNIVES: 3 CUTTERHEAD SPEED: 10,000 RPM TABLE SIZE: 13"X12-1/2" FEED RATE: 26 FPM MAX DEPTH OF CUT: 1/8" MAX STOCK WIDTH: 13" MIN STOCK THICKNESS: 1/8" MAX STOCK THICKNESS: 6" MIN STOCK LENGTH: 10" FEED ROLLERS: NITRILE RUBBER DUST PORT: 4" HEIGHT: 19.5" DEPTH: 14" WIDTH: 22" NET WEIGHT: 76 LBS. SHIPPING WEIGHT" 80 LBS.
|
|
|
|
Machinery - Drill Presses
|
DELTA® 18" DRILL PRESS PROVIDES GREAT STOCK SUPPORT AND ACCURATE PERFORMANCE
|
| 18" Drill Press, 16-spd 3/4hp Tilt-table
...plus other(s)
|
|
OVERSIZED TABLE TILTS FORWARD 0-45° AND ROTATES LEFT/RIGHT 0-90° T-SLOTS ON TABLE FOR AUXILIARY BACK FENCE OR SHOP BUILT JIGS. REPLACEABLE PLUNGE PLATE ON TABLE FOR THROUGH DRILLING. 3/4 HORSEPOWER MOTOR PROVIDES PLENTY OF POWER. AUTO TENSIONING BELT DRIVE SYSTEM MAKES SPEED CHANGES EASY. DEPTH STOP WITH MICRO ADJUSTMENT AND INDEPENDENT DEPTH SCALE. AUTO BELT TENSIONING KEEPS MOTOR AND PULLEY IN ALIGNMENT FOR LESS VIBRATION. 6" QUILL STROKE PROVIDES EXTENDED DEPTH OF CUT. FULLY ADJUSTABLE LASER PROJECTS CROSSHAIR ON WORK PIECE. LED WORK LAMP OF FLEXIBLE GOOSENECK. LARGE NON-TIP BASE WITH FLAT MACHINED SURFACE AND ATTACHMENT SLOTS. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Components - Motors
|
MARATHON ELECTRIC® MOTORS ARE EXACT REPLACEMENTS FOR UNISAW® MOTORS
|
| 3hp Right-tilt Unisaw Replacement Motor
...plus other(s)
|
IF IT EVER BECOMES NECESSARY TO REPLACE THE MOTOR IN YOUR RIGHT OR LEFT TILT DELTA® UNISAW®, MARATHON ELECTRIC® 3 HP AND 5 HP MOTORS HAVE BEEN SPECIFICALLY DESIGNED TO BE A PERFECT MATCH:
230V, 1PH MOTORS OPERATE AT 3,450 RPM. 3 HP MODELS DRAW 12.4A; 5 HP UNITS REQUIRE 20A. 3/4" DIA. SHAFTS. TOTALLY ENCLOSED, FAN COOLED (TEFC) WITH NEMA 145TY FRAMES. ONE YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
WORK FASTER, WORK SAFER WITH BIESEMEYER® 30" COMMERCIAL SAW FENCE SYSTEM
|
| 30" Biesemeyer Commercial Fence
...plus other(s)
|
RUGGEDLY CONSTRUCTED USING 9-PLY FINLAND BIRCH AND HIGH IMPACT LAMINATES HAND FITTED TO SOLID STEEL TUBING AND ANGLE IRON MOUNTING RAIL, BIESEMEYER® COMMERCIAL FENCE SYSTEMS FEATURE HAIRLINE POINTERS AND BUILT-IN TAPE MEASURES FOR PRECISE, REPEATABLE SET UPS:
BC50 COMMERCIAL FENCE SYSTEM: INCLUDES 42" FENCE AND RAILS FOR CUTTING UP TO 50" RIGHT AND 12" LEFT OF BLADE. THREE-POINT LOCKING SYSTEM ENSURES FENCE WILL BE PRECISELY PARALLEL TO THE BLADE AND WILL GIVE A SMOOTH, PRECISE CUT ACCURATE TO 1/32". 93 LBS. SHIPPING WEIGHT. OPTIONAL78-960 T-SQUARE® AND UNIFENCE® BLADE GUARD SYSTEM INCLUDES T-ARM ASSEMBLY, BLADE GUARD, SPLITTER, INSTALLATION BRACKET, MOUNTING HARDWARE AND INSTRUCTIONS. FITS 40" TO 62" FENCE SYSTEMS. 36 LBS. SHIPPING WEIGHT. BC30 COMMERCIAL SYSTEM COMES WITH 42" FENCE AND RAILS FOR 30" RIGHT AND 12" LEFT CUTTING CAPACITY; 77 LBS. SHIPPING WEIGHT. USES 78-955 T-SQUARE® BLADE GUARD SYSTEM (SIMILAR TO 78-960), WHICH FITS FENCE SYSTEMS 40" AND UNDER; 34 LBS. SHIPPING WEIGHT. OPTIONAL 78-966 DUST COLLECTION KIT PERMITS NON-THROUGH CUTTING OPERATIONS WITHOUT REMOVING GUARD. 5 LBS. SHIPPING WEIGHT. OPTIONAL 78-852 UNIVERSAL TABLE BOARD WITH LEGS MEASURES 2-1/2" X 27" X 44". 38 LBS. SHIPPING WEIGHT. OPTIONAL 50-302 OUTFEED TABLE INCLUDES 31" X 34" FOLDING TABLE AND OUTBOARD LEG (MOUNTING HARDWARE INCLUDED). 64 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. USA.
|
|
|
|
Machinery Accessories - Table Saws
|
ZERO CLEARANCE TABLE SAW INSERTS
|
| Zero Clearance Tblsaw Ins, Yellow
...plus other(s)
|
UPGRADE YOUR TABLESAW AND REDUCE TEAROUT FOR SHARP EDGES WITH THE DURABLE ABS PLASTIC PRECISION TABLESAW INSERTS. USE WITH THIN KERF BLADES, RIP BLADES AND DADOES ON LAMINATES, PLYWOODS AND OTHER FINE WOODS:
MOLDED RIBS UNDERNEATH ADD STRENGTH AND ENSURE FLATNESS. SET SCREWS LEVEL AND ELIMINATE SIDE TO SIDE PLAY FOR BETTER ACCURACY THAN OEM INSERTS. 95-380 - USE WITH RIGHT TILT DELTA® CONTRACTOR'S SAW® AND UNISAW® (YELLOW). NOTE: DOES NOT FIT LEFT TILT SAWS. 95-610 - USE WITH MOST CRAFTSMAN® AND SOME RIDGID® TABLESAWS (RED). 95-611 - FITS MOST POWERMATIC® #64 AND #66 SAWS (ORANGE). 95-612 - FITS JET® AND WOODTEK® CONTRACTOR TYPE SAWS (WHITE). IMPORTED. 131-987 (NOT SHOWN) - USE WITH CRAFTSMAN® TABLESAWS (GRAY). PREMIUM MELAMINE FACED, HIGH DENSITY PHENOLIC LAMINATE - LIMITED TO QUANTITIES ON HAND. USA."
|
|
|
|
Machinery Accessories - Table Saws
|
BIESEMEYER® SNAP-IN SPREADER AND DELTA® SPLITTER
|
| Anti Kickback Spreader Unisaw Lt
...plus other(s)
|
BIESEMEYER® T-SQUARE® ANTI-KICKBACK SNAP-IN SPREADERS ARE DESIGNED TO REDUCE DANGEROUS KICKBACK WHEN USING A RIGHT OR LEFT TILT UNISAW® OR OTHER MODELS:
78-431 - LEFT TILT UNISAW®. 78-961 - RIGHT TILT UNISAW®. 78-963 - TILTING ARBOR OR CONTRACTOR'S SAW. 78-968 - 12/14 TILTING ARBOR SAW. SNAPS ON INSTANTLY AND REMOVES EASILY (GUARD REMOVED FOR PHOTOGRAPHIC CLARITY; DO NOT OPERATE SAW WITHOUT GUARDS).
DELTA® MODEL 34-868 DISAPPEARING SPLITTER (NOT SHOWN) ALSO PROVIDES PROTECTION FOR TABLESAW OPERATIONS: FOR USE WITH 10" RIGHT TILT UNISAW® AND 10" TILTING ARBOR SAWS - ANTI-KICKBACK FINGERS INCLUDED. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED
|
|
|
|
Machinery Accessories - Table Saws
|
DELTA® HEAVY DUTY PRECISION MITER GAUGE
|
| Heavy Duty Precision Miter Gauge
|
THE DELTA® 36-946 PRECISION MITER GAUGE FEATURES A MATERIAL STOP FOR ACCURATE REPETITIVE CUTS AND A LARGE 24" FENCE FACE THAT PROVIDES ADDED MATERIAL SUPPORT:
LARGE GRADUATED MITER SCALE FOR FAST, ACCURATE ADJUSTMENTS. MITER BAR EXPANSION SLOTS ALLOW FINE TUNING TO FIT STANDARD 3/4" X 3/8" MITER SLOTS. POSITIVE DETENTS AT 0°, 15°, 22.5°, 30° AND 45°. INCLUDES INTEGRAL CLAMP TO HOLD DOWN MATERIALS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Table Saws
|
DELTA® ARBOR NUT ASSEMBLY IS A CONVENIENT SAWBLADE STABLIZER
|
| Arbor Nut & Flange Right-tilt Saws
...plus other(s)
|
THE TWO-PIECE DELTA® ARBOR NUT ASSEMBLY IS A GREAT ADDITION TO ANY 10" UNISAW® OR OTHER TABLE SAW WITH 5/8-12 ACME RIGHT HAND ARBOR THREADS:
FOR SINGLE BLADE OPERATIONS, AN ARBOR NUT COUPLED WITH A 5/16" X 2-1/2" DIA. MACHINED STEEL FLANGE PROVIDES RIGID BLADE STABILIZATION. FOR STACKED DADO APPLICATIONS, SWITCH TO THE SEPARATE ARBOR NUT WITHOUT A FLANGE. EACH FEATURES A WIDE KNURLED GRIP WITH HEX HEAD FOR FINAL TIGHTENING. 8 OZ. SHIPPING WEIGHT. IMPORTED.
|
|
|
|
Machinery Accessories - Table Saws
|
YOU CAN REPLACE YOUR DAMAGED DELTA® UNIFENCE® FENCE BODY WITH A FACTORY ORIGINAL
|
| 43" Unifence Fence Body
|
THE DELTA® 34-894 FENCE BODY IS IDENTICAL TO THE FENCE BODY SUPPLIED WITH UNIFENCE® SAW GUIDES FOR 10" TABLESAWS:
43" LONG - EXTRUDED, ANODIZED ALUMINUM WITH BUILT IN MOUNTING CHANNEL. PERFECT IF YOU HAVE DAMAGED YOUR ORIGINAL FENCE BODY. ALSO IDEAL FOR USE AS A SPARE FENCE FOR RABBETING AND MOLDING OPERATIONS. WEIGHS 6-3/4 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED. NOTE: FENCE BODY, ONLY - NO OTHER COMPONENTS INCLUDED.
|
|
|
|
Machinery Accessories - Table Saws
|
SLIDING TABLE ATTACHMENT INCREASES THE CAPACITY OF DELTA® UNISAW®, 10" TILTING ARBOR SAW, 10" CONTRACTOR'S SAW® AND HEAVY DUTY WOOD SHAPER
|
| Sliding Table Attachment
...plus other(s)
|
THE DELTA® MODEL 34-555 SLIDING TABLE ATTACHMENT HAS A 42" EXTRUDED ALUMINUM FENCE AND LAMINATED TABLE THAT SLIDE ON SEVEN, ECCENTRIC MOUNTED SEALED BALL BEARINGS FOR EASY ALIGNMENT:
HANDLES STOCK UP TO 25-1/2"W WITH FENCE AT 90°; 28"W AT 45°; 36"W WHEN FENCE IS PLACED AT REAR OF MACHINE. LOCKING STOP PREVENTS TABLE FROM SLIDING WHEN NOT IN USE, ELIMINATING NEED TO REMOVE IT FOR STANDARD CUTTING. INCLUDES ALL STEEL TABLE FRAME AND SUPPORT STRUCTURE, TUBULAR STEEL GUIDE RAILS, MOUNTING HARDWARE AND INSTRUCTIONS. WEIGHS 78 LBS. NOTE: NOT FOR USE ON 10" LEFT TILTING ARBOR SAW. WILL ONLY FIT 10" CONTRACTOR'S SAW® THAT HAS OLD STYLE STAND AND TOP SHELF. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Table Saws
|
GENUINE DELTA® SAW TABLE INSERTS
|
| 10" Standard Insert
...plus other(s)
|
WHEN YOU GET A DADO BLADE OR MOLDING HEAD FOR YOUR TABLESAW, YOU'LL ALSO NEED THE APPROPRIATE TABLE INSERT TO USE IT, PROPERLY. AND, IF YOU USE YOUR SCROLL SAW OR BANDSAW MUCH, YOU'LL EVENTUALLY NEED A REPLACEMENT INSERT. THESE METAL DELTA® REPLACEMENT INSERTS WILL ENSURE PROPER AND SAFE CUTTING (TABLESAW INSERTS HAVE LEVELING SCREWS) AND FIT THE FOLLOWING DELTA® SAW TABLES:
34-154 - STANDARD INSERT FITS RIGHT TILT 10" UNISAW®, 10" CONTRACTOR'S SAW®, 10" PROFESSIONAL SAW. 34-264 - 8" DADO HEAD INSERT FITS RIGHT TILT 10" UNISAW®, 10" CONTRACTOR'S SAW®, 10" PROFESSIONAL SAW. 34-453 - CUTTERHEAD INSERT MOLDING FITS RIGHT TILT 10" UNISAW®, 10" CONTRACTOR'S SAW®, 10" PROFESSIONAL SAW. 36-861 - STANDARD INSERT FITS LEFT TILT 10" UNISAW®, 10" CONTRACTOR'S SAW®. 36-847 - 8" DADO HEAD INSERT FITS LEFT TILT 10" UNISAW®, 10" CONTRACTOR'S SAW®. 426-02-063-0001 - ROUND INSERT FITS 10"-14" BANDSAWS AND 16"-18" SCROLL SAWS.
|
|
|
|
Machinery Accessories - Table Saws
|
MERLIN TABLE SAW SPLITTER INSTALLS OR REMOVES IN SECONDS
|
| Merlin Spltr-delta 10 " Unisaw Rt
...plus other(s)
|
THE MTK SERIES MERLIN TABLE SAW SPLITTER ADDS SAFETY AND CONVENIENCE AND CAN BE INSTALLED OR REMOVED WITHOUT TOOLS IN A MATTER OF SECONDS:
INCLUDES 0.075" THICK SPLITTER BLADE SUITABLE FOR THIN AND REGULAR KERF SAWBLADES, REAR MOUNT ASSEMBLY AND UNIVERSAL RECEIVER, WHICH FITS INSIDE SAW THROAT USING EXISTING HOLES FROM FACTORY-SUPPLIED SPLITTER ASSEMBLY. ADJUSTABLE UP AND DOWN AND SIDE TO SIDE FOR PERFECT ALIGNMENT. ANTI-KICKBACK PROTECTION PROVIDED BY FOUR SHARPENED PIVOTING PAWLS THAT ACT ON THIN AND THICK MATERIAL ALIKE.
MTK120 - DELTA® 10" UNISAW® (RIGHT TILT) AND JET® XACTA TAS-10 (RIGHT TILT). MTK121 - DELTA® 10 UNISAW® (LEFT TILT) AND JET® XACTA (LEFT TILT). MTK130 - DELTA® CONTRACTOR'S SAW® (RIGHT TILT). MTK140 - GENERAL® 350 (RIGHT TILT). MTK150 - GENERAL® 10" CONTRACTOR 50-175 (RIGHT TILT) AND JET® CONTRACTOR JWTS. MTK200 - POWERMATIC® MODEL 66 (LEFT TILT). MTK220 - SEARS® 10" MODEL 113299120C (RIGHT TILT).
|
|
|
|
Machinery Accessories - Stands
|
DELTA® UNIVERSAL STAND
|
| Universal Stand
|
USING THE DELTA® 50-330 UNIVERSAL STAND YOU CAN CONVERT A BENCH TOP DRILL PRESS OR SIMILAR POWER TOOL INTO A FLOOR MODEL:
HEAVY GAUGE STEEL RAILS AND LEGS - BOLT TOGETHER ASSEMBLY. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Mobile Bases
|
FOR A PRECISE FIT, USE GENUINE DELTA® MOBILE BASES
|
| Mobile Base, 20-5/8" X 20-5/8"
...plus other(s)
|
BEING ABLE TO MOVE OR TURN MACHINERY ADDS A WHOLE NEW DIMENSION, ESPECIALLY WHEN WORKING WITH EXTRA LONG BOARDS OR EXTRA LARGE SHEETS. EVEN BETTER, DELTA® MOBILE BASES (UNISAW® BASE SHOWN) HAVE BEEN SPECIFICALLY DESIGNED TO ACCURATELY MATCH UP WITH DELTA® MACHINERY:
50-273 - UNISAW® AND HEAVY DUTY SHAPER. 50-274 - LIGHT DUTY SHAPER, BELT/DISC MACHINE, 14" ENCLOSED BANDSAW. 50-276 - DJ-20 JOINTER. 50-277 - 10" CONTRACTOR'S SAW®, 13" PLANER ON OPEN, STRAIGHT LEG STAND. 50-279 - 34-670 AND 36-600 10" TABLE SAWS. 50-281 - 37-280 JOINTER, 31-250 DRUM SANDER. 50-284 - UNISAW® BASE EXTENSION FOR 52" UNIFENCE® OR 50" BIESEMEYER® FENCE. 50-286 - 10" CONTRACTOR'S SAW®, 13" PLANER ON OPEN, FLARED LEG STAND. 50-287 - 12" BANDSAW, ALL MACHINES MOUNTD ON 50-330 UNIVERSAL STANDS. 50-289 - UNISAW® WITH 52" UNIFENCE® (INCLUDES EXTENSION). 50-293 - 37-190 JOINTER, 31-300 SANDER. 50-296 - 37-380 JOINTER. 50-333 - 37-195 JOINTER. 50-341 - 46-745 AND 47-746 LATHES. 50-361 - 46-715 IRON BED LATHE.
FOOT OPERATED CONTROL LEVER RAISES AND LOWERS MACHINE FOR FASTER OPERATION AND SO YOU DON'T HAVE TO BEND OVER. HEAVY GAUGE STEEL WITH WELDED COMPONENTS AND FITTINGS; SINGLE SWIVEL CASTER OFFERS EASY MOBILITY FOR THE HEAVIEST OF MACHINERY. 50-273, 50-277, 50-286 - ADDING ANY OF THESE BASES TO UNIFENCE® BASE EXTENSION 50-284 WILL ACCOMMODATE THEIR RESPECTIVE FENCE SYSTEMS.
|
|
|
|
Machinery Accessories - Mobile Bases
|
EASY MACHINE MOVEMENT, GUARANTEED - HTC MOBILE BASES WORK BETTER THAN ANY CASTER SYSTEM
|
| Mb, Delta Contractor Saw Crow Feet
...plus other(s)
|
MAKE YOUR POWER TOOLS EASY TO MOVE OR STORE. WHEN YOU WANT ONE, SIMPLY ROLL IT ON ITS HTC MOBILE BASE TO WHERE YOU NEED IT - WHEN YOU'RE DONE, ROLL IT BACK:
THREE POINT LEVELING SYSTEM PROVIDES A SOLID, STABLE STANCE THAT REQUIRES NO TILTING OR ADJUSTING - SEAMLESS WELDING WITH ALL STEEL TUBULAR CONSTRUCTION FOR EXTRA STRENGTH. TWO RIGID WHEELS WITH LOCKING MECHANISMS AND ONE LOCKING SWIVEL WHEEL RAISE MACHINES 3/4" ABOVE FLOOR, ELIMINATING THE NEED TO RECALIBRATE MACHINE SETTINGS THAT CAN BE THROWN OFF BY RAISING AND LOWERING THE MACHINE
HRC-10 - (FITS INSIDE LEGS) DELTA® OLDER 50-315 CONTRACTOR'S SAW® WITH 25" STANDARD FENCE. HRD-10 - DELTA® 34-444, 36-440 AND 36-444 10" CONTRACTOR'S SAW® AND BENCH SAWS. HRLB-6 - DELTA® OLDER MODEL 14" BANDSAW, 6" BELT AND/OR 12" DISC SANDER AND OLDER MODEL 6" JOINTER WITH ENCLOSED TAPERED STANDS; ENCO® 199-9001, -9005, -9011 14" BANDSAWS. HRS-10 - DELTA® UNISAW® WITH 25" FENCE; JET JTAS-10 10" TABLESAW WITH STANDARD FENCE; GRIZZLY® G-1023, G-1023Z TABLESAWS; STAR TOOLS/ENLON IMPORT S3202, EN3202 TABLESAWS; JET OVS-10 SPINDLE SANDER; BRIDGEWOOD® YC-15P PLANER; DELTA® 43-370 THROUGH -386, TWO SPEED SHAPERS. HRBS-14 - DELTA® OLDER MODEL 50-312 FLARED LEG 14" BANDSAW. HRO-14 - DELTA® 28-275 AND 50-313 14" FOUR LEG BANDSAWS; DELTA® 43-355 SHAPER. HRSS-18 - DELTA® 40-560, -601, -640 16", 18", 20" SCROLL SAWS; LOBO MACHINERY CORP. JT-8 8" JOINTER. HRL-12 - DELTA® 12" STANDARD DUTY LATHE. HRJ-15 - DELTA® DJ-15 6" JOINTER; JET OLDER MODEL JBS-14 OS 14" BANDSAW; STAR TOOLS/ENLON IMPORT ENBS14N 14" BANDSAW; BRIDGEWOOD® YC-8J 8" JOINTER. HRD-10-X - DELTA® 34-445 & 36-490, -455 10" CONTRACTOR'S SAW® AND BENCH SAWS WITH 30" FENCE. HRS-8-X - DELTA® 36-751 10" CABINET SAW WITH 30" FENCE. HRS-8-G - DELTA® 36-752 10" CABINET SAW WITH 52" FENCE. HSJ-1413 - JET JWBS-14C 14" CLOSED STAND BANDSAW. HJTS-761 - JET 10" CONTRACTOR SAW; STAR TOOLS/ENLON IMPORT S3501 14.5" BANDSAW. HSK-593 - DELTA® 17-900 DRILL PRESS; GENERAL INTERNATIONAL 75-100 & 75-200 17" DRILL PRESSES; JET JDP-17MF 16-1/2" DRILL PRESS. HPB-30-S - JET JWBS-18 18" BANDSAW; POWERMATIC OLDER 30-B & 33-B BELT AND DISC SANDERS WITHOUT DUST COLLECTORS. HRS-2158 - DELTA® 40-650 18" THREE LEG SCROLL SAW; DEWALT® 20" DW-788 THREE LEG SCROLL SAW. HSB-2665 - DELTA® 31-250 18" X 36" DRUM SANDER. HDS-210 - DELTA® 31-280 6" BELT/12" DISC SANDER. HRS-10-G - DELTA® UNISAW® WITH 50" EXTENSION FENCE; JET JTAS-10 TABLESAW WITH 52" FENCE; GRIZZLY® G-1023 TABLESAW WITH 50" EXTENSION FENCE. HRLB-8 - DELTA® 8" LONG BED JOINTER (OLD STYLE). HRJ-8 - DELTA® 37-350 8" JOINTER. HRL-16 - DELTA® DL-40 ELECTRONIC LATHE. HRL-700 - DELTA® 46-705 LATHE; JET JWL-1236 LATHE. HRS-8 - DELTA® 36-755 10" CABINET SAW WITH 25" FENCE; BRIDGEWOOD® BW-310SL SHAPER. HRLS-5 - DELTA® 28-280 14" BANDSAW. LIFETIME MANUFACTURER'S WARRANTY. USA. LOCATE MOBILE BASES FOR WOODTEK® PRODUCTS BY ENTERING THE MACHINE'S SIX DIGIT PRODUCT NUMBER INTO THE WOODWORKER.COM WIZARD QUERY® SEARCH BOX.
|
|
|
|
Machinery Accessories - Lathes
|
SUPERNOVA2 CHUCKS
|
| Supernova2 W/3/4" X 16tpi Insert
...plus other(s)
|
THE TEKNATOOL SUPERNOVA2 CHUCK HAS ACTION 33% FASTER THAN EARLIER MODELS AND OFFERS INNOVATIONS LIKE PRECISION HARDENED JAW SLIDES WITH AUTO STOP AND A BALL ALLEN HANDLE FOR EASIER ACCESS. THE FULLY SEALED JAWS AND BODY ARE MACHINED FROM 1045 STEEL FOR A LONGER LIFE IN TOUGH CONDITIONS:
LARGER, EASY-GRIP HANDLE CAN BE OPERATED AT ANY ANGLE FOR FASTER TIGHTENING. NEWLY REDESIGNED WOODWORM SCREW HAS A SPECIAL LOCKABLE SHANK. CHUCK IS FULLY COMPATIBLE WITH ALL EXISTING NOVA ACCESSORY JAWS AND INSERTS. CHUCK PACKAGE INCLUDES 2" (50MM) STANDARD JAWS, WOODWORM SCREW, BALL NOSE ALLEN HANDLE, COMPACT DISC AND INSTRUCTION MANUAL. 3-5/8" DIA. X 1-5/8" DEEP. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
3/4"-16TPI FITS CRAFTSMAN, CORONET, RECORD, CARBA-TEC, KLEIN.
1"-8TPI FITS DELTA (MIDI, 14"), GENERAL (MAXI, 160), GRIZZLY (MIDI, 14"), JET (1014, 1220, 1236, 1442), ONEWAY (1224, 1336), RIKON MIDI, STEEL CITY MIDI, VICMARC 100, WOODTEK (MIDI, 12").
1-1/4"-8TPI FITS DELTA 16", GENERAL 260, GRIZZLY (14", 20"), NOVA (1624, DVR 3000, DVR XP), POWERMATIC (3520, 4224), ROBUST (16", 25"), STUBBY, VICMARC 300.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
STANDARD JAW SETS - 136-832. PIN JAW SET - 136-853. SPIGOT JAW SETS - 136-841. STEP JAW SET - 136-847. LONG NOSE JAW SET - 136-859. POWERGRIP JAW SET - 136-868. COLE JAW SET - 136-850. MINI COLE JAW SET - 136-856. SOFT JAW SET - 150-491. FACEPLATE RINGS - 136-871. WOODWORM SCREW - 136-880. COLE JAW SET - 136-850. ACCESSORY INSERTS - 136-808.
|
|
|
|
Machinery Accessories - Lathes
|
DELTA® WOOD LATHE ACCESSORIES
|
| 3" Faceplate, 1"-8tpi-rh/lh, 3 Holes
...plus other(s)
|
A FULL LINE OF QUALITY DELTA® WOOD LATHE ACCESSORIES TO GREATLY EXPAND AND ENHANCE WOODTURNING CAPABILITIES:
ALL THREADS ARE 1" X 8TPI L/R. MORSE TAPERS ARE #2. TOOL REST SHANKS ARE 1" DIA.
|
|
|
|
Machinery Accessories - Lathes
|
VEGA MINI/MIDI LATHE DUPLICATORS
|
| Midi-10, 10" Midi Duplicator
...plus other(s)
|
DESIGNED FOR MAKING IDENTICAL SMALL PARTS, THE VEGA 8500 AND 8562 LATHE DUPLICATORS PROVIDE 10" (MIDI-10) OR 24" (MIDI-24) TRAVEL WHILE ALLOWING YOU TO REMOVE UP TO 1/2" PER PASS WHEN FOLLOWING AN ORIGINAL TURNING OR TEMPLATE:
WILL FIT ALMOST ANY BRAND MINI OR MIDI LATHE WITH A 10" OR 12" SWING (SPECIFY YOUR LATHE BRAND AND MODEL WHEN ORDERING). DUPLICATOR ASSEMBLY, MOUNTING HARDWARE, MASTER TURNING HOLDERS, RESHARPENABLE M2 HIGH SPEED STEEL CUTTER (1/16" TIP RADIUS) AND INSTRUCTIONS INCLUDED (LATHE SHOWN NOT INCLUDED). EASILY CUTS HARDWOODS AND EXOTICS, OPTIONAL MIDI DIAMOND VEE CUTTER KIT 8557 FEATURES AN EXTENDED LIFE CARBIDE CUTTER THAT PROVIDES SUPERIOR FINISHES THAT REQUIRE LESS SANDING. ONE YEAR MANUFACTURER'S WARRANTY. USA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
DELTA 12" MIDI LATHES - 46-455. JET 10" MIDI LATHES - 136-907. JET 12" MIDI LATHES - 150-896. WOODTEK 10" MIDI LATHE - 143-009.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
DELTA 37-157 MAGNETIC JOINTER KNIFE SETTING JIG
|
| Magna-set Jointer Knife Jig
|
DELTA® JOINTER-PAL™ MAGNETIC KNIFE SETTING JIG HOLDS KNIVES TO THE HEIGHT OF THE OUTFEED TABLE SURFACE (+/- .002") FOR FAST, ACCURATE JOINTER KNIFE REPLACEMENT. DELTA® JOINTER-PAL™ MAGNETIC KNIFE SETTING JIG HOLDS KNIVES TO THE HEIGHT OF THE OUTFEED TABLE SURFACE (+/- .002") FOR FAST, ACCURATE JOINTER KNIFE REPLACEMENT. CAN BE USED WITH 6", 8", OR 12" JOINTERS. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
WIXEY™DIGITAL PLANER-CUT DEPTH GAUGE OFFERS AN ULTRA-ACCURATE ALTERNATIVE TO CLUMSY CALIPERS
|
| Digital Planer Readout
|
THIS UNIQUE ELECTRONIC PLANER GAUGE DISPLAYS YOUR EXACT CUTTING DEPTH, IN DECIMALS WITH FRACTIONS, OR IN MILLIMETERS, WITH ABSOLUTE PRECISION:
ENDS THE GUESSWORK AND CONTINUAL CHECKING OF PLANER STOCK DEPTH WITH CALIPERS. MOUNTS IN MINUTES RIGHT ONTO YOUR PORTABLE PLANERS STOCK HEIGHT GAUGE. LARGE LED READOUT IS ACCURATE TO 1/32" IN FRACTIONS (.005" DECIMAL) AND DOWN TO 0.1 MM IN METRIC. MEASURES CUTS UP TO 6" HIGH. MOUNTS TO DEWALT®, DELTA®, RIDGID®, RYOBI®, MAKITA®, CRAFTSMAN AND OTHER PORTABLE PLANERS.
|
|
|
|
Machinery Accessories - Grinders
|
ONEWAY SHARPENING SYSTEM
|
| Wolverine Grinding Jig
...plus other(s)
|
THE ONEWAY SHARPENING SYSTEM INCLUDES THE WOLVERINE GRINDING JIG, SKEW GRINDING JIG, VARI-GRIND JIGS AND DIAMOND DRESSING JIG:
THE WOLVERINE GRINDING JIG WILL SHARPEN GOUGES, SCRAPERS, CHISELS AND PARTING TOOLS IN A SLIDING POCKET VEE-ARM AND PLATFORM MOUNT. INCLUDES TWO WOLVERINE BASES, A 3" X 5" PLATFORM MOUNT AND A 28" LONG SLIDING POCKET VEE-ARM.
THE SKEW GRINDING JIG IS DESIGNED SPECIFICALLY FOR SHARPENING SKEW CHISELS. IT FEATURES A TWO POCKET VEE-ARM WITH OFFSET POCKETS 3-1/2" ON EITHER SIDE TO PERFECTLY ALIGN THE SKEW CHISEL FACE WITH THE GRINDING WHEEL SURFACE. REQUIRES WOLVERINE BASE.
THE VARI-GRIND JIGS ARE DESIGNED TO ACCURATELY PRODUCE AND MAINTAIN TRADITIONAL FINGERNAILS AND SIDE GRINDS ON BOWL AND SPINDLE GOUGES. THE ORIGINAL VARI-GRIND JIG WILL HOLD GOUGES UP TO 5/8" IN DIAMETER AND HAS A FREE-HAND PIVOTING POINT - REQUIRES WOLVERINE JIG FOR OPERATION. THE VARI-GRIND 2 JIG WILL HOLD GOUGES UP TO 3/4" IN DIAMETER AND HAS A FIXED PIVOTING SYSTEM - REQUIRES WOLVERINE JIG OR WOLVERINE BASE ALONE FOR OPERATION.
THE DIAMOND DRESSING JIG IS USED FOR DRESSING GRINDING WHEELS. A FINE ADJUSTMENT KNOB POSITIONS THE 1/4 CARAT DIAMOND IN RELATION TO THE GRINDING WHEEL FOR PRECISION DRESSING.
THE ONEWAY SHARPENING SYSTEM COMPLETE INCLUDES THE WOLVERINE GRINDING JIG, SKEW GRINDING JIG, VARI-GRIND 2 JIG (W/O BASE) AND DIAMOND DRESSING JIG.
ADDITIONAL PLATFORM TABLES AND WOLVERINE BASES ARE AVAILABLE. COMPLETE INSTRUCTIONS INCLUDED WITH ALL JIGS. FIVE YEAR MANUFACTURER'S WARRANTY. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
DELTA BENCH GRINDERS - GR-275. DEWALT BENCH GRINDERS - 114-161. STEEL CITY BENCH GRINDERS - 015-420. CGW GRINDING WHEELS - 105-677. NORTON GRINDING WHEELS - 138-860. PACIFIC GRINDING WHEELS - 106-856. DIAMOND WHEEL DRESSER - 110-849. WHEEL DRESSING STICK - 145-001.
|
|
|
|
Machinery Accessories - Drill Presses
|
WOODTEK MORTISING ATTACHMENT FOR DRILL PRESS
|
| Mortising Attachment For Wdtk Dp
|
THE WOODTEK® MORTISING ATTACHMENT INSTALLS EASILY AND ADDS A SIGNIFICANT CAPABILITY TO YOUR DRILL PRESS:
INCLUDES CAST IRON CHISEL HOLDER (CHISELS NOT INCLUDED), FENCE ASSEMBLY, BUSHINGS, GUIDES, COLLAR, STEEL RODS AND HARDWARE. IN ADDITION TO WOODTEK® 21" DRILL PRESSES, THE ATTACHMENT FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS. 11-1/4 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED."
|
|
|
|
Machinery Accessories - Drill Presses
|
DELTA® DRILL PRESS SHIELD IS A HANDY WAY TO DEFLECT SHAVINGS
|
| Drill Press Shield
|
|
CLEAR PLASTIC SHIELD MOUNTS ONTO ANY DRILL PRESS WITH A 1-1/2 TO 3-11/16 DIA. COLUMN. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
TURN YOUR DRILL PRESS INTO A MORTISING MACHINE WITH A DELTA® MORTISING ATTACHMENT KIT
|
| 17-924 Mortising Kit
|
THE VERSATILE DELTA® MODEL 17-924 MORTISING ATTACHMENT KIT COMES WITH FOUR POPULAR MORTISING CHISEL AND BIT SETS PLUS A HANDY CARRYING CASE THAT HOLDS EVERYTHING FOR EASY STORAGE:
ATTACHES TO DRILL PRESS IN MINUTES WITHOUT THE NEED FOR INSTALLATION TOOLS. LARGE 4" CAPACITY UNDER HOLD DOWN - 2-3/4" CAPACITY FROM ENDS OF CLAMP RODS TO FENCE. COMES WITH 1/4" X 1/4", 5/16" X 5/16", 3/8" X 3/8" AND 1/2" X 1/2" HOLLOW CHISELS AND DRILL BITS, SPECIAL ALIGNMENT GAUGE FOR FAST, ACCURATE SET UPS, LARGE, CAST IRON FENCE ASSEMBLY, BUSHINGS, GUIDES, HEX WRENCH AND INSTRUCTIONS. FITS DRILL PRESSES WITH 38MM, 48MM, 50.8MM AND 66MM QUILL DIAMETERS, INCLUDING DELTA® MODELS 11-090, 11-980, 11-990, 14-040, 14-070, 17-900, 17-925 AND 17-965, PLUS SEARS® MODELS 21313, 21315 AND 21317. KIT WEIGHS 16 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Home Improvement - Automotive
|
SMITH & WESSON® FLASHLIGHTS - BRIGHT, DEPENDABLE AND RUGGED
|
| Delta Force Tactical Flashlight
...plus other(s)
|
SW300TWT GALAXY™ 3 LED FLASHLIGHT IS EXCEPTIONALLY LIGHTWEIGHT (4 OZ.) AND DURABLE: ULTRA-BRIGHT WHITE LEDS OFFER FULL SPECTRUM COLOR FOR TRUE LIGHT AND LAST OVER 10 YEARS. SHATTERPROOF LED DIODES LAST OVER 110,000 HOURS AND HAVE UP TO 30 HOURS OF CONTINUOUS BATTERY LIFE. SMALL LIGHTWEIGHT CONSTRUCTION MAKES IT PERFECT FOR POCKETS, PURSES, BACKPACKS AND MORE. INCLUDES 2 AA BATTERIES. 1" DIA. X 6" LONG - TITANIUM CASE (COLOR). SW320XWT 3XGALAXY 2 IN 1 FLASHLIGHT (NOT SHOWN) COMBINES AN ULTRA-BRIGHT XENON BULB WITH THE ENERGY SAVING EFFICIENCY OF 3 WHITE LEDS: PUSH BUTTON SWITCH FOR LED MODE. STOPLIGHT™ LOCK-OUT TAIL CAP FOR XENON MODE. KNURLED GRIP FOR SECURITY. CONSTRUCTED USING PRECISION MACHINED ANODIZED ALUMINUM FOR SUPERIOR CORROSION RESISTANCE. KNURLED GRIP FOR SECURITY. COMES WITH DELUXE NYLON HOLSTER, SPARE XENON BULB AND 2 AA BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6-1/2 OZ. - BLACK CASE. SW750LH GALAXY™ LUXEON 1W LED HEAD LIGHT COMBINES STATE OF THE ART 30 LUMEN LUXEON™ BULB BRIGHTNESS AND RANGE WITH LED EFFICIENCY: 6 CONTINUOUS HOURS OF OPERATION WITH NEW BATTERIES - OVER 100,000 HOURS OF BULB LIFE. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. INCLUDES ADJUSTABLE HEAD STRAP FOR SECURE, COMFORTABLE FIT. REQUIRES 3 AAA BATTERIES (NOT INCLUDED). 1-3/4" DIA. X 2-1/2" LONG; WEIGHS 4.9 OZ. - BLACK CASE. SW422CBO CLASSIC COMBO INCLUDES A COMPACT FLASHLIGHT WITH ULTRA BRIGHT XENON BULB PLUS A DUAL LOCK-BACK KNIFE: XENON BULB PROVIDES POWERFUL WHITE LIGHT 200% BRIGHTER THAN STANDARD BULBS - ADJUSTABLE BEAM GIVES USER GREATER CONTROL AND PRECISION. ANODIZED AEROSPACE ALUMINUM BODY HAS A KNURLED FINISH FOR EASY GRIPPING. SPARE BULB AND 2 AA BATTERIES INCLUDED. 1" DIA. X 6-1/4" LONG; WEIGHS 4 OZ. - BLACK CASE KNIFE FEATURES TWO DURABLE 3" LONG STAINLESS STEEL LOCKING BLADES - ONE IS A RAZOR SHARP STRAIGHT EDGE FOR GENERAL USE; THE SECOND IS SERRATED FOR MORE DIFFICULT CUTTING. THUMB SCREW FOR EASY ONE HANDED OPENING - BELT CLIP INCLUDED. SW720LX GALAXY™ 1W LUXEON LED FLASHLIGHT IS MOST NOTABLE FOR ITS EXCEPTIONAL BRIGHTNESS. THE HIGH-FLUX LUXEON™ BULB PROVIDES THE LONG LASTING LIFE OF AN LED BUT IS 10 TIMES BRIGHTER THAN A STANDARD LED: PRECISION MACHINED ANODIZED ALUMINUM WITH KNURLED GRIP AND PROTECTIVE NOTCHES TO ENSURE NO SLIPPING OR ROLLING. FIRE, WATER, CORROSION, SHATTER, SCRATCH AND IMPACT RESISTANT. DELUXE HOLSTER, LANYARD AND 2 AA BATTERIES INCLUDED. 1-1/4" DIA. X 6-1/2" LONG; WEIGHS 3.5 OZ. - BLACK CASE. SW900XWT 9XGALAXY 2 IN 1 FLASHLIGHT IS THE ULTIMATE COMBINATION OF POWER AND VERSATILITY: FLASHLIGHT COMBINES AN ULTRA BRIGHT XENON BULB (66 LUMENS) WITH THE POWER AND ENERGY SAVING EFFICIENCY OF A 9 WHITE LED FLASHLIGHT. TWIN SWITCH TECHNOLOGY FOR FAST, EASY SELECTION BETWEEN MODES. ANTI-ROLL BAR AND WATER RESISTANT BODY ENSURE MAXIMUM SAFETY IN THE WORKPLACE. COMES WITH DELUXE HOLSTER, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1-1/2" DIA. X 7" LONG; WEIGHS 6.5 OZ. - BLACK CASE. SW700XT DELTA FORCE TACTICAL FLASHLIGHT (NOT SHOWN) PRODUCES 93 LUMENS OF BRILLIANT WHITE LIGHT FROM A POWERFUL XENON BULB INSIDE A HIGH DENSITY, AEROSPACE TITANIUM ALUMINUM CASE: ANODIZED INSIDE AND OUTSIDE FOR SUPERIOR CORROSION PROTECTION. LENS MADE OF HIGH TENSION, SHATTERPROOF, AND SCRATCH RESISTANT POLYCARBONATE MATERIAL. DOUBLE O-RING SEALED - FIRE, WATER, MOISTURE, AND CHEMICAL RESISTANT. COMES WITH DELUXE HOLSTER, KEY CHAIN, SPARE BULB AND TWO LITHIUM (3V) BATTERIES. 1" DIA. X 6" LONG; WEIGHS 4 OZ. - BLACK CASE.
LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
