|
|
|
Machinery Accessories - Drill Presses
|
TURN YOUR DRILL PRESS INTO A MORTISING MACHINE WITH A DELTA® MORTISING ATTACHMENT KIT
|
| 17-924 Mortising Kit
|
THE VERSATILE DELTA® MODEL 17-924 MORTISING ATTACHMENT KIT COMES WITH FOUR POPULAR MORTISING CHISEL AND BIT SETS PLUS A HANDY CARRYING CASE THAT HOLDS EVERYTHING FOR EASY STORAGE:
ATTACHES TO DRILL PRESS IN MINUTES WITHOUT THE NEED FOR INSTALLATION TOOLS. LARGE 4" CAPACITY UNDER HOLD DOWN - 2-3/4" CAPACITY FROM ENDS OF CLAMP RODS TO FENCE. COMES WITH 1/4" X 1/4", 5/16" X 5/16", 3/8" X 3/8" AND 1/2" X 1/2" HOLLOW CHISELS AND DRILL BITS, SPECIAL ALIGNMENT GAUGE FOR FAST, ACCURATE SET UPS, LARGE, CAST IRON FENCE ASSEMBLY, BUSHINGS, GUIDES, HEX WRENCH AND INSTRUCTIONS. FITS DRILL PRESSES WITH 38MM, 48MM, 50.8MM AND 66MM QUILL DIAMETERS, INCLUDING DELTA® MODELS 11-090, 11-980, 11-990, 14-040, 14-070, 17-900, 17-925 AND 17-965, PLUS SEARS® MODELS 21313, 21315 AND 21317. KIT WEIGHS 16 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
DELTA® DRILL PRESS SHIELD IS A HANDY WAY TO DEFLECT SHAVINGS
|
| Drill Press Shield
|
|
CLEAR PLASTIC SHIELD MOUNTS ONTO ANY DRILL PRESS WITH A 1-1/2 TO 3-11/16 DIA. COLUMN. IMPORTED.
|
|
|
|
Machinery Accessories - Drill Presses
|
WOODTEK® ATTACHMENT CONVERTS YOUR DRILL PRESS INTO A MORTISING MACHINE
|
| Mortising Attachment For Wdtk Dp
|
THE WOODTEK® MORTISING ATTACHMENT INSTALLS EASILY AND ADDS A SIGNIFICANT CAPABILITY TO YOUR DRILL PRESS:
INCLUDES CAST IRON CHISEL HOLDER (CHISELS NOT INCLUDED), FENCE ASSEMBLY, BUSHINGS, GUIDES, COLLAR, STEEL RODS AND HARDWARE. IN ADDITION TO WOODTEK® 21" DRILL PRESSES, THE ATTACHMENT FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS. 11-1/4 LBS. SHIPPING WEIGHT. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery Accessories - Jointers & Planers
|
HAVE NEW PLANER OR JOINTER KNIVES ON HAND BEFORE YOU NEED THEM
|
| 10" Planer Knives
...plus other(s)
|
HAVING AN EXTRA SET OF PLANER OR JOINTER KNIVES CAN ELIMINATE DOWNTIME BECAUSE YOU CAN CHANGE KNIVES WHEN ONE SET GETS DULL, IF YOU CHIP A KNIFE OR NEED A SUPER SMOOTH CUT LATE IN THE PRODUCTION SCHEDULE:
HIGH SPEED STEEL, UNLESS OTHERWISE NOTED. CHECK YOUR PLANER AND JOINTER MANUAL FOR THE CORRECT SIZE. IMPORTED.
PLANER KNIVES:
731-002 - RYOBI® AP-10. 900-860 - WOODTEK® 12". 813-903 - PARKS®, POWERMATIC®. 902-411 - WOODTEK® 12" (CARBIDE TIPPED). 22-562 - DELTA® 22-560. 899-642 - JET, GRIZZLY®, RELIANT, RBI 612, 812. 22-547 - DELTA® 12" 22-540. 914-099 - DEWALT® DW733. 928-567 - JET JPM-13. 22-656 - DELTA® RC-33. 821-385 - WOODTEK® 15", GRIZZLY®, RELIANT, TTL. 934-883 - JET JWP-15CSW. 22-677 - DELTA® DC-380. 945-857 - MAKITA® 2040. 813-896 - PARKS® 20", JET JW208-K. 817-449 - WOODTEK® 20".
JOINTER KNIVES:
147-060 - DELTA® 4", ATLAS PRESS CO. 147-059 - OLD DELTA® AND WOODTEK® 6", BOICE-CRANE, CRAFTSMAN®, TTL. 947-478 - GRIZZLY® 6". 37-155 - DELTA® DJ-15 6". 37-658 - DELTA® 6" DELUXE. 37-072 - DELTA® 6" PORTABLE 37-070. 147-058 - OLD DELTA® AND WOODTEK® 8", BOICE-CRANE, TTL. 37-355 - DELTA® DJ-20 8". 945-864 - JET JJ-8 8"
SOLID CARBIDE JOINTER KNIVES:
859-630. 859-637. 859-644 - OLD DELTA®, WOODTEK® 8".
|
|
|
|
Machinery Accessories - Stands
|
DELTA® UNIVERSAL STAND
|
| Universal Stand
|
USING THE DELTA® 50-330 UNIVERSAL STAND YOU CAN CONVERT A BENCH TOP DRILL PRESS OR SIMILAR POWER TOOL INTO A FLOOR MODEL:
HEAVY GAUGE STEEL RAILS AND LEGS - BOLT TOGETHER ASSEMBLY. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
DELTA® 16-1/2" DRILL PRESS INCLUDES TWINLASER®
|
| 16-1/2" Drill Press, 1/2hp
|
DELTA® MODEL 17-950L 16-1/2" DRILL PRESS INTEGRATES A DUAL LASER POD THAT PROJECTS CROSSHAIRS ONTO THE TABLE AT THE POINT OF BIT CONTACT FOR MUCH MORE PRECISE DRILLING:
120V, 1/2HP, 1,720 RPM MOTOR; 12 SPEEDS - 250-3,000 RPM. 5/8" JACOBS® CHUCK AND KEY, 2" QUILL DIAMETER, 3-7/8" STROKE. ADJUSTABLE-POSITION LOCKING DEPTH STOP FOR ACCURATE DEPTH MEASUREMENT AND REPETITIVE DRILLING. ZERO-CLEARANCE MDF PLUNGE PLATE - 18" X 14" CAST IRON TABLE WITH T-SLOTS TILTS 0-45° FORWARD AND 0-90°, LEFT AND RIGHT. BELTS, STEP PULLEY, MOTOR CONTROL, WORK LIGHT AND INSTRUCTIONS INCLUDED. 66"H X 12-3/4"W X 25-1/4"D. NET WEIGHT 194 LBS.; 225 LBS. SHIPPING WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
LONGER QUILL STROKE ON DELTA® 17" LASER DRILL PRESS INCREASES VERSATILITY
|
| 17" Drill Press With Twin Lasers
|
FEATURING A FULL 4-7/8" QUILL TRAVEL, THE DELTA® MODEL 17-959L 17" LASER DRILL PRESS INTEGRATES A FULLY ADJUSTABLE LASER POD THAT PROJECTS A CROSSHAIR AT THE DRILL BIT'S EXACT POINT OF CONTACT WITH YOUR WORKPIECE:
120V, 3/4HP, 1,720 RPM MOTOR; 16 SPEEDS (215-2,720 RPM) - 5/8" CHUCK W/KEY. 1-3/4" QUILL AND 3.15" COLUMN DIAMETERS - 17" SWING. 14" X 18" CAST IRON TABLE WITH T-SLOTS TILTS 0-45° FORWARD AND 0-90°, LEFT AND RIGHT. ZERO-CLEARANCE MDF PLUNGE PLATE REMOVES FOR THROUGH DRILLING WITH LARGE BITS AND ALSO ACCOMMODATES SANDING DRUMS. ADJUSTABLE-POSITION LOCKING DEPTH STOP FOR ACCURATE DEPTH MEASUREMENT AND REPETITIVE DRILLING. NEW NON-TIP BASE FOR GREATER STABILITY. BELTS, STEP PULLEY, MOTOR CONTROL, WORK LIGHT, WRENCHES AND INSTRUCTIONS INCLUDED. 70"H X 18"W X 25"D. NET WEIGHT 238 LBS.; 248 LBS. SHIPPING WEIGHT. TWO-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Drill Presses
|
WOODTEK® 21" FLOOR DRILL PRESS
|
| 21" Drill Press W/mortising Attachment
...plus other(s)
|
WITH ITS THREE SPOKE WHEEL, TILTING CAST IRON TABLE (0° TO 45°, LEFT AND RIGHT), LOCKING RACK AND PINION HEIGHT ADJUSTMENT AND QUIET, POWERFUL "V" BELT DRIVE MOTOR, THE WOODTEK® 21" FLOOR DRILL PRESS OFFERS REAL VALUE FOR MONEY SPENT:
MOTOR - 1HP, 120V, 12A, 1PH, 1,700 RPM. SPEEDS (12) - 180, 280, 300, 480, 500, 650, 1,250, 1,650, 1,700, 2,500, 2,850 AND 4,200 RPM. CHUCK - 5/8"; JT3/MT3 SPINDLE TAPER. SWING - 21-1/8". STROKE - 4-13/16". TABLE SIZE - 18-3/8" X 16-1/2". OVERALL DIMENSIONS - 68"H X 20"W X 22-1/2"D. NET WEIGHT - 326 LBS. SHIPPING WEIGHT - 346 LBS.
NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
IN ADDITION TO WOODTEK® 16-1/2" AND 21" DRILL PRESSES, MORTISING ATTACHMENT 832-294 FITS DELTA® AND CRAFTSMAN® 20" DRILL PRESSES AS WELL AS OTHERS WITH 2-15/16" COLLARS.
|
|
|
|
Machinery - Drill Presses
|
NEW DELTA® 12" DRILL PRESS
|
| Dp-300l 12" Drill Press W/laser
|
DELTA® MODEL DP-300L 12" DRILL PRESS INTEGRATES A DUAL LASER POD THAT PROJECTS A CROSSHAIR ONTO THE TABLE AT THE POINT OF BIT CONTACT FOR MUCH MORE PRECISE DRILLING. ALSO FEATURED ARE A PRECISE RACK AND PINION TABLE RAISING/LOWERING SYSTEM, LARGE WORK TRAY AND FLEXIBLE LIGHT:
120V, 1/3HP MOTOR; 5 SPEEDS - 620-3,100 RPM. 1/2" JACOBS® CHUCK AND KEY, 1-1/2" QUILL DIA., 2-3/8" STROKE. 8-1/2" X 9-7/8" TILTING TABLE. BELTS, PULLEYS, MOTOR CONTROL AND INSTRUCTIONS INCLUDED. 34"H X 11"W X 21"D. WEIGHS 78 LBS. TWO YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse our
(Reconditioned)
symbol next to the category that matches your desired product and select a sub-category link.