Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Sawblades (5)
Circular (5)
|
|
|
Sawblades - Circular
|
STEEL CITY™ 8" STACK DADO SET IS HIGHLY DURABLE AND EASY TO SETUP
|
| 8" Stack Dado, 1/4" To 13/16"
|
THE STEEL CITY™ 8" STACK DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT SLOTS, GROOVES, DADOES AND RABBETS FROM WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
INCLUDES 2-8" OUTSIDE BLADES, 5-CHIPPERS, 6-SHIMS PLUS A WOOD CASE. ADJUSTABLE FOR 1/4" TO 13/16" WIDTH CUTS. 5/8" ARBOR. WEIGHS 7 LBS. INCLUDING CASE. ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Sawblades - Circular
|
FREUD® QUALITY AND CRAFTSMANSHIP IN AFFORDABLE 6" AND 8" DIAMETER STACK DADOES
|
| Sd206 6" Pro Dado Set
...plus other(s)
|
|
NEGATIVE HOOK ANGLES CUT FLAT BOTTOM GROOVES AND VIRTUALLY SPLINTER FREE CUTS. TWO OUTSIDE BLADES COMBINE WITH THE 5 TWO-WING CHIPPERS: FOUR 1/8" AND ONE 1/16" TO CUT DADOS FROM 1/4" TO 13/16" IN 1/16" INCREMENTS. 5/8" ARBORS: 6" DADO SET HAS 10 TEETH; 8", 12 TEETH. ANTI-KICKBACK DESIGN WITH RESHARPENABLE CARBIDE TIPS FOR YEARS OF USE. INCLUDES SHIM SET FOR FINE ADJUSTMENTS. NOT RECOMMENDED FOR FERROUS METALS OR MASONRY.
|
|
|
|
Sawblades - Circular
|
DELTA® 8" STACK DADO WITH DURABLE CASE
|
| 8" 24t 5/8" Stack Dado W/case & Shims
...plus other(s)
|
DELTA® 35-7670 8" STACK DADO COMES STANDARD WITH ALL OF THE CHIPPERS NEEDED FOR PLYWOOD AND SOLID-WOOD CONSTRUCTION:
HEAVY GAUGE, LASER CUT PLATES PROVIDE TRUE, ACCURATE CUTS - 5/8" ARBOR. OUTER BLADES ARE 1/8" THICK AND HAVE 24 TEETH. CHIPPERS INCLUDE FOUR, FOUR WING 1/8", ONE 3/32" AND 1/16" BLADES. ALL HAVE A -12° HOOK TO HELP CONTROL TEAR OUT AND PROVIDE FOR SAFER OPERATION IN RADIAL ARM SAW APPLICATIONS. MICRO-GRAIN CARBIDE TEETH DELIVER CLEAN CUTS AND REDUCE SPLINTERING. 12 STAINLESS STEEL SHIMS ALLOW FOR ULTRA-FINE WIDTH ADJUSTMENTS. HEAVY DUTY STORAGE CASE PROTECTS BLADES AGAINST CHIPPED TEETH AND DAMAGE. 5 LBS. NET WEIGHT; 10 LBS. SHIPPING WEIGHT. IMPORTED. NOTE: NOT FOR USE ON HAND HELD SAWS.
|
|
|
|
Sawblades - Circular
|
FREUD® SUPER DADO SET INCLUDES SHIMS AND 6 CHIPPERS
|
| 6" Stack Super Dado, 5/8" Bore
...plus other(s)
|
THE FREUD® SUPER DADO SET CAN BE USED ON TABLE AND RADIAL ARM SAWS TO CUT CHIP FREE SLOTS, GROOVES, DADOES AND RABBETS FROM 1/4" TO 29/32" WIDE IN EVERYTHING FROM VENEERED PLYWOODS AND LAMINATES TO SOLID WOOD:
POLISHED METAL - AVAILABLE IN 6" (MODEL SD506) 8" (MODEL SD508) 10" (MODEL SD510) OR 12" (MODEL SD512) SETS. PROPERLY STRESSED AND TENSIONED 1/8" THICK OUTSIDE BLADES FEATURE VERY SHARP AND STEEPLY BEVELED CARBIDE TEETH (-12° HOOK ANGLE, 15° RELIEF ANGLE, 20° TOP BEVEL ANGLE) THAT LEAVE CLEANER EDGES. BLADES CUT 0.005" TO 0.010" DEEPER THAN CHIPPERS TO PREVENT TEAROUT ON CROSS GRAIN DADOES. INSIDE CHIPPERS FEATURE THE SAME CARBIDE - FOUR 1/8" THICK, ONE 3/32" AND ONE 1/16". NOT FOR USE ON HAND HELD SAWS. ITALY.
|
|
|
|
Sawblades - Circular
|
FREUD® 8" STACKED DADO SET DOESN'T NEED SHIMS
|
| 8"dial A Width Dado System
|
NOT A WOBBLE DADO! CUTTING CLEAN, FLAT-BOTTOM DADOES IS A LOT EASIER WITH THE FREUD® MODEL SD608 8" DIAL-A-WIDTH DADO™ STACKED DADO SET:
IN THIS SET, SHIMS HAVE BEEN REPLACED WITH A PATENTED DIAL SYSTEM, WHICH ALLOWS YOU TO MICRO-ADJUST THE CUT WIDTH - EACH "CLICK" ADJUSTS THE BLADE 0.004". CUT CAPACITY WITH THE COMBINATION OF INCLUDED CHIPPERS IS FROM 1/4" TO 29/32". OVERSIZED TEETH ALLOW FOR LONGER CUTTING LIFE BETWEEN SHARPENINGS AS WELL AS MORE RESHARPENINGS - -5° HOOK ANGLE, 15° TOP BEVEL ANGLE, 5/8" ARBOR. MOUNTS EASILY WITH NO LOOSE COMPONENTS AND ADJUSTABLE HUB LETS YOU FINE TUNE WIDTH WITHOUT EVER REMOVING THE CUTTER FROM YOUR TABLE OR RADIAL ARM SAW. INCLUDES TWO OUTSIDE BLADES, FIVE CHIPPERS (FOUR 1/8", ONE 3/32"), WRENCH AND CARRYING CASE. WORKS EQUALLY WELL ON LEFT- OR RIGHT-OPERATING MACHINES. LIMITED LIFETIME MANUFACTURER'S WARRANTY. ITALY.
|
|
|
|
Advanced Search Tools
Browse
