|
|
|
Bits Drill And Boring - Specialty
|
WOODTEK® HINGE CUP BORING BITS
|
| Hinge Boring Bit 15 Mm
...plus other(s)
|
WOODTEK® CARBIDE TIPPED HINGE CUP BORING BITS FEATURE TWIN WING CUTTERS AND OUTLINING SPURS TO PRODUCE CRISP SIDES ON FLAT BOTTOMED HOLES FOR HINGE CUPS, CYLINDER LOCKS AND SPINDLE:
RUGGED PTFE (POLYTETRAFLUOROETHYLENE) BRITEVIEW™ COATING NOT ONLY PROTECTS BUT THE BRIGHT YELLOW COLOR PROVIDES BETTER VISIBILITY FOR SAFER OPERATIONS. MICRO-GRAIN CARBIDE CUTTING SURFACES HAVE BEEN DIAMOND HONED TO 800 GRIT FOR MINIMAL TEAR-OUT AND SMOOTHER SURFACE QUALITY. CNC-MACHINING TO +/-0.001" TOLERANCES AND DYNAMIC BALANCING HELP ENSURE VIBRATION-FREE OPERATION. MANUFACTURED IN FACILITIES MEETING STRINGENT ISO 9000:2000 QUALITY ASSURANCE STANDARDS. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
DAMPER SYSTEM ADDS SOFT CLOSING FEATURE TO SELF CLOSING CABINET DOORS
|
| Smove Cyl For 200/b/f-beige
...plus other(s)
|
THE SALICE SMOVE DAMPER SYSTEM USES SMALL CYLINDERS TO ABSORB THE PRESSURE FROM SELF CLOSING CABINET DOORS AND ELIMINATE NOISE. AFTER A DOOR IS REOPENED, PRESSURE IS RELEASED AND THE CYLINDER PISTON MOVES FORWARD, AGAIN READY FOR USE:
CYLINDERS CAN BE PRESS MOUNTED INTO 10MM DIA. X 50MM DEEP HOLES BORED INTO CABINET FRAMES OR SURFACE MOUNTED, USING OPTIONAL ADAPTERS. FOR BEST RESULTS ON BOTH FACE FRAME AND FRAMELESS CABINETS, CYLINDERS SHOULD BE MOUNTED APPROXIMATELY 27MM FROM THE HINGE SIDE (DISTANCE CAN VARY DUE TO DOOR WEIGHT AND CLOSING PRESSURE). CABINET DOORS OVER 1,600MM (63") HIGH REQUIRE TWO SMOVE CYLINDERS. AVAILABLE IN HONEY OR BEIGE TO COMPLEMENT MOST CABINET COLORS. ITALY.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
ADD BLUMOTION™ SOFT CLOSING ACTION TO YOUR CABINET DOORS
|
| Blumotion F/doors Cylinder Only
...plus other(s)
|
BLUMOTION™ FOR DOORS INSTALLS DIRECTLY INTO CABINET PANELS (10MM DIA. X 50MM DEEP BORE) OR FASTENS ONTO PANELS OR FACE FRAMES USING CAST ZINC ADAPTERS:
CYLINDER SENSES HOW HARD THE DOOR IS BEING CLOSED AND ADJUSTS RESISTANCE TO KEEP THE DOOR FROM SLAMMING SHUT. OPTIMAL MOUNTING POSITION FOR USE WITH COMPACT™ HINGES IS TOP MOUNTED, 8"-12" FROM THE HINGE SIDE. FOR USE WITH CLIP TOP™ HINGES, THE OPTIMAL MOUNTING POSITION IS CENTERED ON THE SIDE OPPOSITE THE HINGES. BASED UPON DOOR WEIGHT, SIZE AND NUMBER OF HINGES USED, OPTIMAL MOUNTING POSITION CAN VARY. A TRIAL APPLICATION IS RECOMMENDED. FOR DOORS UP TO 24" WIDE, ONE BLUMOTION™ CYLINDER IS USUALLY SUFFICIENT. FOR TALLER OR HEAVIER DOORS, TWO MIGHT BE REQUIRED. SOLD INDIVIDUALLY OR IN BOXES OF 50. FOR EASE OF INSTALLATION, THE BLUMOTION™ DRILLING TEMPLATE IS DESIGNED FOR BORING FOR EITHER DIRECT MOUNTING INTO THE CABINET SIDE OR TO POSITION PILOT HOLES FOR THE INLINE OR WING ADAPTERS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Hinges - Concealed
|
HIGH QUALITY, SOLID BRASS CYLINDER HINGES INSTALL EASILY
|
| 14mm Cylinder Hinge
...plus other(s)
|
TO INSTALL SOLID BRASS CYLINDER HINGES, SIMPLY DRILL TWO HOLES:
DESIGNED FOR FLUSH INSET APPLICATIONS, THESE HINGES ARE COMPLETELY CONCEALED WITH DOOR/LID CLOSED AND BARELY SHOW WHEN DOOR/LID IS OPEN. OPENING ANGLE IS 180°. FIVE SIZES OF CYLINDERS ACCOMMODATE MATERIAL FROM 1/2" TO 1-1/8" THICK. ONCE CORRECTLY LOCATED, THE CYLINDER CAN BE LOCKED INTO PLACE WITH A SET SCREW. IMPORTED. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
BRADPOINT BITS 896-545.
|
|
|
|
Hardware Hinges - Specialty
|
DOUBLE LOCKING BIFOLD DOOR HINGES
|
| Dbl Locking Bi Fold Hinge
|
THE SPRING LOADED CYLINDER OF THE DOUBLE LOCKING HINGE HOLDS BI-FOLD DOORS CLOSED, HALF OR FULLY OPEN, YET RELEASES EASILY:
MINIMUM STILE WIDTH IS 1-1/8". BLACK, POWDER COAT FINISH LASTS FOR YEARS. WORKS GREAT WITH 270° HINGES AS AN ALTERNATIVE TO POCKET DOORS. HINGE MEASURES 2-1/2" X 2-1/2" (SCREWS INCLUDED).
|
|
|
|
Hardware Locks And Latches - Cylinder Locks
|
TAMBOUR DOOR LOCK
|
| Tambour Door Cam Lock
|
DESIGNED FOR USE ON TAMBOUR DOOR ON ROLLTOP DESKS, THESE LOCKS WORK ALSO FOR APPLIANCE GARAGE DOORS, HINGED TOPS AND SLIDING DOORS:
FOR 3/4" PANELS; BRASS FINISHED LOCK FACE AND BEZEL FIT A 3/4" HOLE. INCLUDES STRIKE PLATE AND TWO KEYS.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.