|
|
|
Machinery - Band Saws
|
MILL YOUR OWN PRECISION DIMENSIONAL LUMBER USING A PERSONAL SAWMILL
|
| 15hp Personal Sawmill
...plus other(s)
|
IF YOURE A WOOD HOBBYIST OR CRAFTSMAN, YOU DONT NEED TO BUY BOARDS FROM THE LUMBERYARD ANYMORE. SURPRISINGLY EASY TO SET UP AND OPERATE, THE WOOD-MIZER® MODEL LT15 PERSONAL SAWMILL CAN HANDLE LOGS UP TO 28" DIA. AND VIRTUALLY ANY LENGTH:
15HP, ELECTRIC START, GASOLINE FUELED ENGINE. 158"L X 1.25"W X 0.042"T BLADE - CUTS 75-125 BD.FT./HR (102-983 BLADES MUST BE ORDERED SEPARATELY). HAND CRANK ADJUSTS CARRIAGE POSITION AND MOVES HEAD UP AND DOWN TO CHANGE BOARD THICKNESS (CUT TO WITHIN 1" OF BED). EXTENSIVE GUARDING ALONG WITH THE COMBINATION CLUTCH/BRAKE FOR OPERATOR SAFETY. INCLUDES TWO, 80" LONG BED SECTIONS WITH INTEGRAL LEVELERS THAT CAN HANDLE LOGS UP TO 11' LONG. 944 LBS. ASSEMBLED - OWNER'S MANUAL CONTAINS ASSEMBLY AND DISASSEMBLY INSTRUCTIONS SO SAWMILL CAN BE LOADED INTO A PICKUP BY TWO PEOPLE. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY. 102-977 - ANY NUMBER OF OPTIONAL BED SECTIONS CAN BE ADDED TO INCREASE CAPACITY - EACH 80" LONG SECTION WEIGHS 160 LBS. 102-980 - OPTIONAL PROPACKAGE INCLUDES INDUSTRIAL QUALITY ANTI-ROLLBACK LOG LOADING RAMPS, CANT HOOK AND LOG TAPER WEDGE. USA.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 18" BAND SAW
|
| 18" Band Saw 2hp 1ph 230v
...plus other(s)
|
WITH TWO SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, WOODTEK® BAND SAWS TRACK STRAIGHT AND RUN COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOTS AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN AND A QUICK RELEASE BLADE LATCH. FOOT BRAKES ARE LARGE AND EASY TO REACH, SO YOU CAN QUICKLY STOP THE BLADE. SAWBLADE, TIRE, MITER GAUGE, RIP FENCE, GUIDE RAIL, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. 4" DIA. DUST COLLECTION PORT AT THE LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
WOODTEK® 18" BAND SAW: MOTOR - 2 HP, 230V, 9.6A, 1PH, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 3,000 FPM. BLADE SIZE - 144", 1/4" TO 1" WIDE (17-1/2" DIA. WHEEL). HEIGHT CAPACITY - 10". DEPTH CAPACITY - 17-1/2". TABLE SIZE - 25-5/8" X 18-1/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 72-3/4"H X 31-1/2"W X 28-1/2"D. SHIPPING WEIGHT - 558 LBS.
WOODTEK® 20" BAND SAW: MOTOR - 2 HP, 230V, 12A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,000 FPM. BLADE SIZE - 155", 3/8" TO 1" WIDE (20" DIA. WHEEL). HEIGHT CAPACITY - 12-7/16". DEPTH CAPACITY - 19-3/16". TABLE SIZE - 23" X 20-1/2"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 73-3/4"H X 34"W X 26"D. SHIPPING WEIGHT - 593 LBS.
WOODTEK® 24" BAND SAW: MOTOR - 5 HP, 230V, 25A, 1 PH - "V" BELT DRIVE (8' POWER CORD INCLUDED, PLUG NOT INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MAGNETIC. BLADE SPEED - 4,600 FPM. BLADE SIZE - 177", 3/8" TO 1" WIDE (23-1/4" DIA. WHEEL). HEIGHT CAPACITY - 15-1/2". DEPTH CAPACITY - 23-1/4". TABLE SIZE - 29" X 22-3/4"; TILTS 45°L AND 8°R. OVERALL DIMENSIONS - 80"H X 36"W X 28"D. SHIPPING WEIGHT - 753 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 4 SPEED WOOD OR METAL BAND SAW
|
| 15" 4-spd Wood/metal Band Saw
...plus other(s)
|
WOODTEK® 15" OR 18" FOUR SPEED METAL/WOOD CUTTING BANDSAWS WILL EASILY HANDLE FERROUS AND NON-FERROUS METALS AS WELL AS HARD AND SOFT WOODS - CLUTCH LEVER SWITCHES BETWEEN OPERATING MODES:
80 FPM (STEEL AND STEEL ALLOYS), 150 FPM (CAST IRON AND BRONZE), 200 FPM (ALUMINUM, BRASS AND COPPER) OR 2,800 FPM (WOODCUTTING). UPPER AND LOWER GUIDE PINS PROVIDE SAWBLADE SIDE SUPPORT THRUST BEARINGS SUPPORT REAR. SEPARATE BLADE TENSIONING AND BLADE TRACKING CONTROLS. HEAVY CAST IRON TABLES HAVE 3/8" X 3/4" MITER SLOT AND OFFER VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. 14TPI METAL CUTTING AND 6TPI WOOD CUTTING SAWBLADES, TIRES, MITER GAUGE, RIP FENCE WITH KNOB, WRENCHES, HARDWARE AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
130-367 15" BANDSAW:
MOTOR - 1HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 111", 3/16" TO 3/4" WIDE (15" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 8-3/4". DEPTH CAPACITY - 14-5/8". TABLE SIZE - 15" X 15"; TILTS 5°L AND 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 68"H X 27"W X 22"D. NET WEIGHT - 302 LBS. SHIPPING WEIGHT - 353 LBS.
130-370 18" BANDSAW:
MOTOR - 1-1/2HP, 115V, 1PH, 14A, 1,720 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SIZE - 133", 3/16" TO 1" WIDE (18" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-3/4". DEPTH CAPACITY - 17-3/4". TABLE SIZE - 18" X 19"; TILTS 45°R. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 75"H X 33"W X 24"D. NET WEIGHT - 344 LBS. SHIPPING WEIGHT - 400 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 133517 14" BAND SAW 1HP W/FENCE & MITER
|
| 14" Band Saw 1hp W/fence & Miter
...plus other(s)
|
WITH TWO UPPER AND TWO LOWER SIDE BEARINGS THAT STAY IN ROLLING CONTACT WITH THE BLADE, THE WOODTEK® TWO SPEED 14" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING SUPPORTS THE BACK OF THE BLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
HEAVY CAST IRON TABLE HAS 3/8" X 3/4" MITER SLOT AND OFFERS VIBRATION FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. AIR NOZZLE, SAWBLADE, URETHANE TIRES, MITER GAUGE, EXTRUDED ALUMINUM FENCE SYSTEM, WRENCHES AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1HP, 120V, 1PH, 10A, 1,750 RPM - "V" BELT DRIVE (8' POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,720 OR 2,900 FPM. BLADE SIZE - 93-1/2", 1/4" TO 3/4" WIDE (13-7/8" DIA. WHEELS). HEIGHT CAPACITY - 6". DEPTH CAPACITY - 13-1/2". TABLE SIZE - 16-1/16" X 16-1/2"; TILTS 13°L AND 50°R. DUST PORT - 2-1/4" DIA. OVERALL DIMENSIONS - 67"H X 29-1/2"W X 19-1/8"D. SHIPPING WEIGHT - 194 LBS.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw 1-1/2hp
...plus other(s)
|
"ONE SOLID MACHINE" AND "PURRED LIKE A KITTEN" ARE WORDS WOOD® MAGAZINE EDITORS USED TO DESCRIBE THE POWERMATIC® PWBS-14CS 14" BAND SAW:
1-1/2 HP, 115/230V, 1PH MOTOR - 3,000 SFPM. MICRO ADJUSTABLE, DUAL BEARING BLADE GUIDE SYSTEM ABOVE AND BELOW THE TABLE - 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. TWO PIECE CAST IRON TABLE HAS 5" X 15" TILTING (45° RIGHT, 10° LEFT) SECTION AND FIXED 15" X 5" EXTENSION - CHIP BLOWER ENSURES CLEAN, VISIBLE CUT LINE. TENSIONING GAUGE SETTINGS INDICATED IN "BLADE WIDTH" INCREMENTS CARTER QUICK RELEASE™ LEVER SPEEDS BLADE CHANGES. BALANCED, NINE SPOKE CAST IRON WHEELS RUN SMOOTHLY - POLY V-BELT MAXIMIZES POWER TRANSMISSION WHILE MINIMIZING NOISE AND VIBRATION. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. MITER GAUGE, 1/4" X 93-1/2" BLADE, 60 WATT HALOGEN WORK LIGHT, TOOL KIT AND INSTRUCTIONS INCLUDED. 68"H X 34"W X 20"L. 203 LBS. NET WEIGHT; 221 LBS. SHIPPING WEIGHT. FIVE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® 20" AND 24" INDUSTRIAL BAND SAWS
|
| 2415 24" 2-spd Band Saw, 3hp 1ph 230v
...plus other(s)
|
TWO-SPEED POWERMATIC® MODEL 2013 20" AND MODEL 2415 24" INDUSTRIAL BAND SAWS CAN BE OPERATED AT 2,000 SFPM OR 4,000 SFPM TO TAKE FULL ADVANTAGE OF THEIR STANDARD AND RESAW CAPACITIES:
2, 3 OR 5 HP MOTOR - 1PH OR 3PH - 230V OR 230/460V WITH MAGNETIC ON/OFF SWITCH. SAWBLADE IS COMPLETELY GUARDED BUT EASILY ACCESSIBLE FOR CHANGING. CAST IRON WHEELS ARE EQUIPPED WITH VULCANIZED RUBBER TIRES - LOWER WHEEL BRUSH HELPS ELIMINATE SAWDUST BUILDUP. EASILY ACCESSIBLE HANDWHEELS AND CONTROLS. CONVENIENT FOOT BRAKE FOR RAPID STOPS. CAST IRON TABLE WITH 3/8" X 3/4" MITER SLOT TILTS 45° RIGHT, 10° LEFT. 4" DIA. DUST COLLECTION PORT (MINIMUM 600 CFM DUST COLLECTION REQUIRED). WORK LIGHT, RIP FENCE, MITER GAUGE, RAILS, WRENCH, HARDWARE AND INSTRUCTIONS INCLUDED.
MODEL 2013 20" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 12-3/8"/20". TABLE: 24" X 24". BLADE LENGTH/WIDTH: 158-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-1/4" TABLE HEIGHT X 34-1/4"W X 24"D. NET WEIGHT: 950 LBS. SHIPPING WEIGHT: 970 LBS.
MODEL 2415 24" INDUSTRIAL BAND SAW
THICKNESS/WIDTH CAPACITIES: 14-3/8"/24". TABLE: 24" X 28". BLADE LENGTH/WIDTH: 180-1/2" - 1/4" TO 1-1/2". DIMENSIONS: 35-3/8" TABLE HEIGHT X 39"W X 34-3/8"D. NET WEIGHT: 1,050 LBS. SHIPPING WEIGHT: 1,190 LBS.
ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 14" BAND SAWS
|
| 14" Band Saw, Closed Stand, 1hp
...plus other(s)
|
WITH ALL OF ITS FEATURES, THE JET® JWBS-14CS (708115K) 14" CLOSED STAND WOODWORKING BAND SAW WILL BE A WELCOME ADDITION TO YOUR SHOP:
1HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. MICRO ADJUSTABLE BLADE GUIDE WITH GRAPHITE IMPREGNATED JET BLOCKS™ FOR SMOOTHER RUNNING. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 15" X 15" CAST IRON TABLE TILTS 45°R AND 10°L. ONE PIECE WELDED STAND REQUIRES NO ASSEMBLY - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. SIMILAR JWBS-14MW (708116K) 14" CLOSED STAND METALWORKING BAND SAW FEATURES THREE SPEEDS (735, 1,470, 2,350 SFPM) FOR NON-FERROUS METAL AND WOODWORKING APPLICATIONS. 68"H X 26"W X 19"D. 185 LBS. NET WEIGHT; 200 LBS. SHIPPING WEIGHT. JWBS-14OS (708113A) 14" OPEN STAND WOODWORKING BAND SAW FEATURES: 3/4HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. 6" UNDER GUIDE CAPACITY; 13-1/2" FRAME TO BLADE CLEARANCE. 14" X 14" CAST IRON TABLE TILTS 45°R AND 15°L. 16GA STEEL STAND - BUILT IN 4" DUST PORT. 3/8" X 93-1/2" 6TPI BLADE AND INSTRUCTIONS INCLUDED. 68"H X 24"W X 26-1/2"D. 172 LBS. NET WEIGHT; 187 LBS. SHIPPING WEIGHT.
5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
FROM GENERAL CUTTING TO RESAWING, JET® 16", 18" AND 20" WOODWORKING BAND SAWS CAN HANDLE IT ALL
|
| Jwbs-16b 16" Band Saw 1-1/2hp 1ph
...plus other(s)
|
JET® PROFESSIONAL WOODWORKING BAND SAWS FEATURE TRIANGULAR COLUMN AND STEEL STANDS FOR ROCK SOLID STABILITY:
BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. CAST IRON TABLES TILT 45°R AND 10°L. PUSH BUTTON, MECHANICAL ON/OFF SWITCH (JWBS-18X-3 AND JWBS-20 HAVE MAGNETIC SWITCHES).
JWBS-16B 16" BAND SAW 708749B: 1-1/2HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 10" DEPTH RESAW CAPACITY; 16-3/8" WIDE CUTTING CAPACITY. 17" X 17" TABLE. 123" SAWBLADE. 71"H X 22"W X 30-3/4"D. 310 LBS. NET WEIGHT; 345 LBS. SHIPPING WEIGHT.
JWBS-18QT 18" BAND SAW 710750B: 1-3/4HP, 1PH, 115V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 410 LBS. NET WEIGHT; 450 LBS. SHIPPING WEIGHT.
JWBS-18QT-3 18" BAND SAW 710751B: 3HP, 1PH, 230V TEFC MOTOR - 3,000 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 18-3/8" WIDE CUTTING CAPACITY. 19" X 19" TABLE. 137" SAWBLADE. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 460 LBS. SHIPPING WEIGHT.
JWBS-20QT-3 20" BAND SAW 708754B: 3HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
JWBS-20QT-5 20" BAND SAW 708755B: 5HP, 1PH 230V TEFC MOTOR - 3,450 SFPM. 12-1/4" DEPTH RESAW CAPACITY; 20" WIDE CUTTING CAPACITY. 21" X 21" TABLE. 150" SAWBLADE. 75"H X 22"W X 30-3/4"D. 596 LBS. NET WEIGHT; 636 LBS. SHIPPING WEIGHT.
T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT AND MITER GAUGE (JWBS-16 EXCLUDED), 4TPI 3/4" WIDE SAWBLADE, 4" DUST PORT, FOOT BRAKE (JWBS-20 ONLY) AND INSTRUCTIONS INCLUDED. 5 YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
IT'S TOUGH TO MATCH THE JET® 18" WOODWORKING BANDSAW FOR FEATURES, QUALITY AND PRICE
|
| Jwbs-18qt 18" Band Saw 1-3/4hp 1ph
|
ONE OF THE MOST POPULAR JET® BANDSAWS, THE JWBS-18 18" WOODWORKING BANDSAW HAS EVERYTHING NEEDED TO RUN RIGHT OUT OF THE BOX:
1-1/2HP, 115/230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 10-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 133" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D; 320 LBS. NET WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 20" WOODWORKING BANDSAW IS POWERED BY A 2HP INDUSTRIAL STRENGTH MOTOR
|
| Jwbs-20qt-3 20" Band Saw 3hp 1ph
|
A TRUE CUTTING AND RESAWING WORKHORSE, THE JET® JWBS-20 20" WOODWORKING BANDSAW COMES WITH ALL OF THE FEATURES EXPECTED BY PROFESSIONAL OR SERIOUS AMATEUR WOODWORKERS - EVEN A FOOT BRAKE AS STANDARD EQUIPMENT:
2HP, 230V, 1PH TEFC MOTOR - 3,450 SFPM. PUSH BUTTON, MAGNETIC ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 20" FRAME TO BLADE CLEARANCE. 21" X 21" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK AND PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 150" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 75"H X 22"W X 30-3/4"D; 500 LBS. NET WEIGHT. LIMITED LIFETIME MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
JET® 18" WOODWORKING BANDSAW WITH ROLLER GUIDES
|
| Jwbs-18qt-3 18" Band Saw 3hp 1ph
|
THE JET® JWBS-18X-3 18" WOODWORKING BANDSAW HAS BIG-MACHINE CAPACITY WITH A FOOTPRINT SLIGHTLY LARGER THAN A 14" MACHINE:
3HP, 230V, 1PH TEFC MOTOR - 3,000 SFPM. PUSH BUTTON, MECHANICAL ON/OFF SWITCH. 12-1/4" UNDER GUIDE CAPACITY; 18-3/8" FRAME TO BLADE CLEARANCE. 19" X 19" CAST IRON TABLE TILTS 45°R AND 10°L. BLADE TENSION HANDWHEEL AND DIRECT READING BLADE TENSIONING SCALE. RACK-AND-PINION BLADE GUIDE HEIGHT ADJUSTMENT PLUS UPPER AND LOWER EUROPEAN STYLE ROLLER BLADE GUIDES. COMES WITH DUAL TAPERED, ONE PIECE STEEL SUPPORT COLUMN, T-STYLE RIP FENCE WITH 6" STEEL RESAW ATTACHMENT, MITER GAUGE, 137" LONG X 3/4" WIDE SAWBLADE, 4" DUST PORT AND INSTRUCTIONS. 71"H X 22"W X 33"D. 420 LBS. NET WEIGHT; 435 LBS. SHIPPING WEIGHT. 5-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Machinery - Band Saws
|
WOODTEK 17" WOOD CUTTING BAND SAW
|
| 17" Band Saw 2hp 1ph 120/230v
|
THE WOODTEK® 17" BANDSAW TRACKS STRAIGHT AND RUNS COOL - A THIRD BEARING IN THE UPPER AND LOWER BLADE GUIDES SUPPORTS THE BACK OF THE SAWBLADE FOR MORE CONSISTENT CUTS WITH LESS FEED PRESSURE (ESPECIALLY HELPFUL WHEN RESAWING):
UPPER BLADE GUIDE IS ON A RACK-AND-PINION SYSTEM FOR GREATER ACCURACY. HEAVY CAST IRON TABLE, WITH 3/8" X 3/4" MITER "T" SLOT, OFFERS VIBRATION-FREE PERFORMANCE. BLADE CHANGES ARE QUICK AND EASY WITH DOORS THAT SWING WIDE OPEN. DUST PORT AT LOWER WHEEL LETS YOU CATCH DUST NEAR ITS SOURCE FOR A CLEANER SHOP. SAWBLADE, REMOVABLE BLADE INSERT, RUBBER TIRES, LOWER WHEEL WIPER, MITER GAUGE, WRENCHES, HARDWARE AND INSTRUCTIONS INCLUDED. ONE-YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 2HP, 120/240V, 8A/4A, 1PH, 1,720 RPM - "V" BELT DRIVE. ON/OFF SWITCH - PUSH BUTTON, MECHANICAL. BLADE SPEED - 1,800 FPM/2,800 FPM. BLADE SIZE - 130-1/2", 1/4" TO 1-3/8" WIDE (14-3/4" DIA. CAST IRON WHEELS). HEIGHT CAPACITY - 10-1/2". THROAT CAPACITY - 17-5/16". TABLE SIZE - 18" X 19"; TILTS 45°R AND 13°L. FENCE - 3-5/8"H X 18"L. DUST PORT - 4" DIA. OVERALL DIMENSIONS - 84"H X 38"W X 30"D. NET WEIGHT - 350 LBS. SHIPPING WEIGHT - 404 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Band Saws
|
POWERMATIC 1791800 PM1800 18" BAND SAW
|
| Pm1800 18" Band Saw, 5hp 1ph 230v
...plus other(s)
|
|
BALL BEARING BLADE GUIDES WITH MICRO-ADJUSTMENT FOR GREAT BLADE CONTROL SPECIAL GROOVED THRUST BEARING STABILIZES SMALLER BLADES MASSIVE CAST IRON CONSTRUCTION DAMPENS VIBRATION FOR SMOOTH OPERATION DYNAMICALLY BALANCED CAST IRON WHEELS HAVE FLYWHEEL MOMENTUM 2 BLADE SPEEDS TO HANDLE A VARIETY OF WORK, 1,800/4,200 SFPM 24" X 24" CAST IRON TABLE WITH 3/8" X " T-BOTTOM MITER SLOT HEAVY DUTY T-SQUARE STYLE FENCE WITH ADJUSTABLE EXTRUDED ALUMINUM CHEEK INCLUDES PRECISION MITER GAUGE 2" DIAMETER SOLID STEEL RE-SAW POST MULTI-STEP BLADE TENSION RELEASE LEVER IS QUICK AND EASY TO USE 4" DUST PORT CONVENIENTLY LOCATED FOOT BRAKE 5HP MOTOR IN SINGLE OR THREE PHASE, 3-PHASE PRE-WIRED 230V
|
|
|
|
Machinery - Band Saws
|
GENERAL INTERNATIONAL® 14" DELUXE WOOD BAND SAW WITH 12" RESAW CAPACITY
|
| 14" Band Saw W/ 12" Resaw Capacity
|
MODEL #90-170 M1 14" DELUXE WOOD BAND SAW HAS A HEAVY-DUTY ONE-PIECE FRAME DESIGNED FOR ADDED STABILITY. NO FURTHER ASSEMBLY REQUIRED. DYNAMICALLY-BALANCED CAST-IRON WHEELS HAVE REPLACEABLE RUBBER TIRES. SOLID, HIGH QUALITY, PRECISION MACHINED RIBBED CAST-IRON TABLE WITH 10° LEFT AND 45° RIGHT TILTING ACTION FOR BEVEL CUTS.
FEATURES:
DELUXE UPPER AND LOWER BLADE GUIDE BEARINGS INCLUDED. 2 CUTTING SPEEDS FOR EXCELLENT RESULTS IN EITHER HARD OR SOFT WOODS. PRECISION METAL MITER GAUGE AND DUAL MITER SLOTS IN TABLE FOR STABLE PRECISION CROSS CUTS ON EITHER SIDE OF THE BLADE. DELUXE EXCALIBUR BANDSAW RIP FENCE SYSTEM WITH CURVED RESAW GUIDE BLOCK. ONBOARD STORAGE MOUNTS FOR MITER GAUGE AND RIP FENCE. SMOOTH RACK AND PINION UPPER BLADE GUARD ADJUSTMENT. QUICK RELEASE BLADE TENSION LEVER FOR FAST BLADE CHANGES. 2 BUILT-IN 4" DIAMETER DUST CHUTES FOR BETTER DUST COLLECTION. LARGE PADDLE-STYLE STOP SWITCH. LARGE 12" RESAW CAPACITY. 3/4" BLADE INCLUDED.
|
|
|
|
Machinery - Band Saws
|
1/2 HP BANDSAW 198 LBS
|
| 1/2 Hp Bandsaw 198 Lbs
...plus other(s)
|
|
|
|
Machinery - Band Saws
|
POWERMATIC® PWBS-14CS CLOSED STAND 14" BAND SAW INCLUDES RIP FENCE WITH RESAW ASSEMBLY
|
| Pwbs-14cs 14" Band Saw & Riser Block
...plus other(s)
|
|
PWBS-14CS 14" BAND SAW + RISER BLOCK KIT RISER BLOCK KIT FOR 14" BAND SAW
|
|
|
|
Machinery - Radial Arm Saws
|
ORIGINAL™ 12" CONTRACTOR DUTY RADIAL ARM SAW WILL SATISFY THE MOST DISCRIMINATING WOODWORKER
|
| 12" Radial Arm Saw, 3hp 1ph, 230v
...plus other(s)
|
PRODUCED AS AN EXTENSION OF THE ORIGINAL™ SAW COMPANY INDUSTRIAL CUTTING MACHINE LINE, THE 12" CONTRACTOR DUTY RADIAL ARM SAW USES ALL CAST IRON AND CAST ALUMINUM CONSTRUCTION AND IS MOUNTED ONTO A POWDER COATED, HEAVY GAUGE STEEL FRAME AND LEGS:
119-468 - MODEL 3512-01 RADIAL ARM SAW: 2HP, 230V, 1PH, 11.2A, 3,425 RPM TEFC MOTOR.
119-495 - MODEL 3512-03 RADIAL ARM SAW: 3HP, 208/230V/460V, 3PH, 3,425 RPM TEFC MOTOR.
34-15/16" MAXIMUM RIP CUT - 24-1/4" MAXIMUM CROSS CUT (1" STOCK; 21-1/4" MAXIMUM CROSS CUT IN 3" STOCK). 3-1/16" MAXIMUM CUT DEPTH. 1" DIA. X 2-3/16" ARBOR - AUTOMATIC ELECTROMECHANICAL BLADE BRAKE SYSTEM. 24V CONTROLS - MAGNETIC STARTER WITH OVERLOAD AND LOW VOLTAGE PROTECTION. START/STOP CONTROLS AT END OF ARM, REPLACING OLDER VERSIONS WITH CONTROLS AT REAR OF MOTOR. PRECISION CARRIAGE RIDES ON 4 TIGHT TOLERANCE CONVEX BEARINGS MOUNTED HORIZONTALLY. USES 12" DIA. SAWBLADE (NOT INCLUDED). BUILT TO EXACTING TOLERANCES AND MANUFACTURED WITH ADJUSTMENTS AT ALL WEAR POINTS, GIVING EXTREMELY TIGHT CUTTING TOLERANCES THROUGHOUT ITS SERVICE LIFE. INCLUDES ARBOR HEX WENCH, FLAT ARBOR WRENCH, INSTRUCTIONS AND POWER CORD (PLUG NOT INCLUDED). 39"L X 26"D X 70"H (31" HIGH, OVERSIZED MDF TABLE), WEIGHS 405 LBS. USA. NOTE: SHIPPED DIRECTLY FROM FACTORY - PLEASE ALLOW 4-6 WEEKS FOR DELIVERY.
|
|
|
|
Machinery - Radial Arm Saws
|
WOODTEK 14" RADIAL ARM SAW
|
| 14" Radial Arm Saw, 4-1/2hp, 1ph, 230v
...plus other(s)
|
ONE OF THE MOST VERSATILE WOODWORKING TOOLS THAT YOU CAN BUY, THE WOODTEK® 14" RADIAL ARM SAW IS A ROCK-SOLID MACHINE THAT'S ALSO A ROCK-SOLID VALUE:
IN ADDITION TO CROSSCUTS, THIS SAW WILL LET YOU CUT INTO YOUR WORKPIECES FROM A VARIETY OF DIFFERENT ANGLES AND DIRECTIONS. VERTICAL YOKE HANDLE AND CONVENIENTLY LOCATED UPFRONT OPERATING CONTROLS - TOP-MOUNTED BLADE ELEVATING WHEEL W/LOCK. REAR-DIRECTED SAWDUST CHUTE HELPS KEEP CHIPS AWAY FROM THE CUTS. FORMED STEEL BASE ASSEMBLY PROVIDES STRENGTH AND DURABILITY. LASER CUT LINE INDICATOR, SAWBLADE, ANTI-KICKBACK DEVICE, BASE, TABLE CLAMPS, BLADE GUARD, HARDWARE AND COMPLETE INSTRUCTIONS INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 4-1/2HP, 230V, 12A, 1PH OR 3PH, 3,450 RPM. ON/OFF SWITCH - PUSH BUTTON, MAGNETIC, WITH EMERGENCY STOP. SAWBLADE - 14" DIA., 1" ARBOR. TABLE - 25-1/2" X 43-1/4" MDF WITH FULL-WIDTH MDF FENCE. BEVEL STOPS - 0°, 45°, 90° W/BEVEL LOCK. MITER STOPS - +45°, -45°, 90° W/MITER LOCK. MAXIMUM CUT DEPTH @ 90° - 3-9/16". MAXIMUM CUT DEPTH @ 45° - 2". OVERALL DIMENSIONS - 65"H X 43-1/4"W X 44"D. NET WEIGHT - 457 LBS. SHIPPING WEIGHT - 535 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WOODWORKER'S SUPPLY® STOCKS MORE THAN 5,000 WOODTEK® PARTS IN ITS WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. CALL 1-800-545-9663, M-F, 7 AM-4 PM, MOUNTAIN TIME.
|
|
|
|
Machinery - Radial Arm Saws
|
HEAVY DUTY SERIES 14" AND 16" RADIAL ARM SAWS ADD CAPACITY TO A ROCK SOLID MACHINE
|
| 14" Radial Arm Saw, Sdt Arm, 1ph
...plus other(s)
|
MOTORS DESIGNED AND BUILT SPECIFICALLY FOR RADIAL ARM SAWS. BUILT TO EXACTING TOLERANCES WITH ADJUSTMENTS AT WEAR POINTS. 2 ARM LENGTHS AVAILABLE: 16" AND 24" CROSSCUT (1" STOCK). AUTOMATIC BRAKE BUILT INTO MOTOR STOPS BLADE WITHIN 30 SECONDS. POWDER COATED DURABLE FINISH ON CAST IRON AND STEEL COMPONENTS. ALL CASTINGS AND MOTORS MADE IN THE USA. ONE YEAR MANUFACTURER'S WARRANTY. SPECIFICATIONS
152-657DV
BLADE (DIA.) : 14"
MOTOR: 3HP
PHASE: 1PH
VOLTAGE: 230V
HERTZ: 60 HZ
ARBOR: 1" X 2-3/16"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 16"
RIP, MAX: 29-7/8"
MITER, 45°, 1": 10-7/8"
THICKNESS, 90°: 4-1/8"
BEVEL, 45°: 1-3/4"
SHIPPING WEIGHT: 560 LBS.
152-660DV
BLADE (DIA.) 14"
MOTOR: 5HP
PHASE: 3PH
VOLTAGE: 208-230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 2-3/16"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 16"
RIP, MAX: 29-7/8"
MITER, 45°, 1": 10-7/8"
THICKNESS, 90°: 4-1/8"
BEVEL, 45°: 1-3/4"
SHIPPING WEIGHT: 560 LBS.
152-663DV
BLADE (DIA.) : 14"
MOTOR: 3HP
PHASE: 1PH
VOLTAGE: 230V
HERTZ: 60 HZ
ARBOR: 1" X 2-3/16"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 24"
RIP, MAX: 37-7/8"
MITER, 45°, 1": 15-1/2"
THICKNESS, 90°: 4-1/8"
BEVEL, 45°: 1-3/4"
SHIPPING WEIGHT: 600 LBS.
152-666DV
BLADE (DIA.) : 14"
MOTOR: 5HP
PHASE: 3PH
VOLTAGE: 208-230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 2-3/16"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 24"
RIP, MAX: 37-7/8"
MITER, 45°, 1": 15-1/2"
THICKNESS, 90°: 4-1/8"
BEVEL, 45°: 1-3/4"
SHIPPING WEIGHT: 600 LBS.
152-669DV
BLADE (DIA.) : 16"
MOTOR: 5HP
PHASE: 3PH
VOLTAGE: 208-230/460V
HERTZ: 50/60 HZ
ARBOR: 11" X 2-3/16"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 16"
RIP, MAX: 29-7/8"
MITER, 45°, 1": 10-7/8"
THICKNESS, 90°: 4-15/16"
BEVEL, 45°: 2"
SHIPPING WEIGHT: 560 LBS.
152-672DV
BLADE (DIA.) : 16"
MOTOR: 5HP
PHASE: 3PH
VOLTAGE: 208-230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 2-3/16"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 24"
RIP, MAX: 37-7/8"
MITER, 45°, 1": 15-1/2"
THICKNESS, 90°: 4-15/16"
BEVEL, 45°: 2"
SHIPPING WEIGHT: 600 LBS.
|
|
|
|
Machinery - Radial Arm Saws
|
SUPER DUTY SERIES 16", 20" AND 22" RADIAL ARM SAWS HAVE CAPACITY TO HANDLE TIMBERS WITH PRECISION ACCURACY
|
| 16" Radial Arm Saw Med Arm 1ph
...plus other(s)
|
MOTORS DESIGNED AND BUILT SPECIFICALLY FOR RADIAL ARM SAWS. BUILT TO EXACTING TOLERANCES WITH ADJUSTMENTS AT WEAR POINTS. 2 ARM LENGTHS AVAILABLE: 40" AND 48" CROSSCUT ON 1" STOCK. AUTOMATIC BRAKE BUILT INTO MOTOR (16"& 20") STOPS BLADE WITHIN 30 SECONDS. 22" MODEL HAS AUXILIARY ELECTRONIC BRAKE STOPS BLADE WITHIN 30 SECONDS. POWDER COATED DURABLE FINISH ON CAST IRON AND STEEL COMPONENTS. ALL CASTINGS AND MOTORS MADE IN THE USA. ONE YEAR MANUFACTURERS WARRANTY. SPECIFICATIONS 152-675DV BLADE (DIA.): 16"
MOTOR: 5HP
PHASE: 1PH
VOLTAGE: 230V
HERTZ: 60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 24"
RIP, MAX: 40-3/4"
MITER, 45°, 1": 16"
THICKNESS, 90°: 4-3/8"
BEVEL, 45°: 2"
SHIPPING WEIGHT: 925 LBS.
152-678DV
BLADE (DIA.) : 16"
MOTOR: 5HP
PHASE: 3PH
VOLTAGE: 230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 24"
RIP, MAX: 40-3/4"
MITER, 45°, 1": 16"
THICKNESS, 90°: 4-3/8"
BEVEL, 45°: 2"
SHIPPING WEIGHT: 925 LBS.
152-681DV
BLADE (DIA.): 16"
MOTOR: 7-1/2HP
PHASE: 1PH
VOLTAGE: 2230V
HERTZ: 560 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 32"
RIP, MAX: 48-3/4"
MITER, 45°, 1": 21-5/8"
THICKNESS, 90°: 4-3/8"
BEVEL, 45°: 2"
SHIPPING WEIGHT: 960LBS.
152-684DV
BLADE (DIA.): 16"
MOTOR: 7-1/2HP
PHASE: 3PH
VOLTAGE: 230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 32"
RIP, MAX: 48-3/4"
MITER, 45°, 1": 21-5/8"
THICKNESS, 90°: 4-3/8"
BEVEL, 45°: 2"
SHIPPING WEIGHT: 960LBS.
152-687DV
BLADE (DIA.): 20"
MOTOR: 7-1/2HP
PHASE: 3PH
VOLTAGE: 230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 24"
RIP, MAX: 40-3/4"
MITER, 45°, 1": 16"
THICKNESS, 90°: 6-1/4"
BEVEL, 45°: 3-1/4"
SHIPPING WEIGHT: 925 LBS.
152-690DV
BLADE (DIA.): 20"
MOTOR: 7-1/2HP
PHASE: 3PH
VOLTAGE: 230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 32"
RIP, MAX: 48-3/4"
MITER, 45°, 1": 21-5/8"
THICKNESS, 90°: 6-1/4"
BEVEL, 45°: 3-1/4"
SHIPPING WEIGHT: 960LBS.
152-693DV
BLADE (DIA.): 22"
MOTOR: 7-1/2HP
PHASE: 3PH
VOLTAGE: 230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 23"
RIP, MAX: 40-3/4"
MITER, 45°, 1": 16"
THICKNESS, 90°: 8"
BEVEL, 45°: N/A
SHIPPING WEIGHT: 1000 LBS.
152-696DV
BLADE (DIA.): 22"
MOTOR: 7-1/2HP
PHASE: 3PH
VOLTAGE: 230/460V
HERTZ: 50/60 HZ
ARBOR: 1" X 3-1/8"
BRAKE, MAX TIME: 30 SEC.
CROSSCUT, 90°, 1": 31"
RIP, MAX: 48-3/4"
MITER, 45°, 1": 21-5/8"
THICKNESS, 90°: 8"
BEVEL, 45°: N/A
SHIPPING WEIGHT: 1050 LBS.
|
|
|
|
Machinery - Radial Arm Saws
|
ORIGINAL SAW COMPANY BEAM SAW HAS CAPACITY TO CUT 64" ACROSS AND 4-15/16" TO 6-1/4" THICK
|
| 16" Beam Saw, 5hp, 3ph
...plus other(s)
|
|
ORIGINAL SAW COMPANY BEAM SAWS ARE IDEAL FOR A VARIETY OF CUTOFF AND DADO APPLICATIONS. ORIGINAL SAW CO. MOTORS ARE DESIGNED AND BUILT IN THEIR OWN FACTORY TO MEET THE UNIQUE AND DEMANDING NEEDS OF THIS INDUSTRIAL MACHINE. MOTORS DESIGNED AND BUILT SPECIFICALLY FOR BEAM SAWS. CAST IRON, CAST ALUMINUM & MACHINED STRUCTURAL BOX TUBING CONSTRUCTION. HEAVY WELDED U CHANNEL FRAME. HARDENED, SMOOTH GROUND, AND REPLACEABLE TRACK RAILS. MANUAL CHAIN CARRIAGE FEED, OPTIONAL POWER FEED AVAILABLE. AUTOMATIC BRAKE BUILT INTO MOTOR STOPS BLADE WITH 30 SECONDS. POWDER COATED FINISH ON CASTINGS, FRAME AND LEGS. ALL CASTINGS AND MOTOR MADE IN USA. FOOTPRINT REQUIREMENT: 48" X 102". ONE YEAR MANUFACTURERS WARRANTY. SPECIFICATIONS 152-699DV (3690-01) BLADE (DIA.):16" MOTOR:5HP PHASE:3PH VOLTAGE:208-230/460V HERTZ:50/60 HZ ARBOR:1" X 2-3/16" BRAKE, MAX TIME:30 SECONDS CROSSCUT, 90, 1":64" THICKNESS, 90:4-15/16" BEVEL 45:2" SHIPPING WEIGHT:1275 LBS. 152-702DV (3691-01) BLADE (DIA.):20" MOTOR:7-1/2HP PHASE:3PH VOLTAGE:208-230/460V HERTZ:50/60 HZ ARBOR:1" X 2-3/16" BRAKE, MAX TIME:30 SECONDS CROSSCUT, 90, 1":64" THICKNESS, 90:6-1/4" BEVEL 45:3-1/4" SHIPPING WEIGHT:1400 LBS.
|
|
|
|
Machinery - Radial Arm Saws
|
DELTA® 18", 16" AND 14" RADIAL ARM SAW "TURRET ARM" CONSTRUCTION LETS SAWBLADE ROTATE FULL 360° ABOVE TABLE
|
| 14" Radial Saw, 5hp, 3ph, 230/460v
...plus other(s)
|
DELTA® 18", 16" AND 14" INDUSTRIAL RADIAL ARM SAWS FEATURE LIFETIME, TRACK RODS WITH GLASS SMOOTH HARDENED SURFACES TO MINIMIZE ROLLER FRICTION. ALL MODELS FEATURE:
TEFC, 3,450 RPM MOTORS WITH ELECTRIC BRAKE; 1" ARBOR. 29" X 1" DEEP MAXIMUM CROSSCUT CAPACITY; 22" 45° RIGHT AND LEFT MITER; 41" MAXIMUM OUT RIP. 0°, 30°, 45°, 60° AND 90° BEVEL STOPS; 90° AND 45°, RIGHT AND LEFT, MITER STOPS. UPFRONT OPERATING CONTROLS INCLUDING BLADE ELEVATING CRANK. 44" X 36-1/2" TABLE; 76"H OVERALL. CUTTERHEAD RETURN AUTOMATICALLY PULLS THE CUTTERHEAD BEHIND THE FENCE. INCLUDE BLADE GUARD WITH ANTI-KICKBACK ATTACHMENT, RETRACTABLE LEAF GUARD, COMBINATION SAW BLADE, CUTTERHEAD CLAMP KNOB, ADJUSTABLE CROSSCUT STOP, STEEL LEGS AND INSTRUCTION MANUAL.
33-421 - 18" MODEL 33-421: 7-1/2HP, 230/460V, 3PH MOTOR. 4-7/8" MAXIMUM CUT DEPTH AT 90°. 6-1/16" MAXIMUM CUT DEPTH AT 90° WITHOUT LEAF GUARD. 3" MAXIMUM 45° BEVEL CUT DEPTH. WEIGHS 745 LBS.
33-420 - 18" MODEL 33-420: SAME AS 33-421 BUT WITH 5HP, 230V, 1PH MOTOR.
33-411 - 16" MODEL 33-411: 5HP, 230/460V, 3PH MOTOR. 4-1/2" MAXIMUM CUT DEPTH AT 90°. 5-1/16" MAXIMUM CUT DEPTH AT 90° WITHOUT LEAF GUARD. 2-1/8" MAXIMUM 45° BEVEL CUT DEPTH. WEIGHS 740 LBS.
33-410 - 16" MODEL 33-410: SAME AS 33-411 BUT WITH 3HP, 230V, 1PH MOTOR.
33-401 - 14" MODEL 33-401: 5HP, 230/460V, 3PH MOTOR. 4" MAXIMUM CUT DEPTH AT 90°. 4-1/16" MAXIMUM CUT DEPTH AT 90° WITHOUT LEAF GUARD. 3/4" MAXIMUM 45° BEVEL CUT DEPTH. WEIGHS 725 LBS.
33-400 - 14" MODEL 33-400: SAME AS 33-401 BUT WITH 3HP, 230V, 1PH MOTOR.
|
|
|
|
Machinery - Radial Arm Saws
|
DELTA® 10" AND 12" RADIAL ARM SAWS CROSS CUT, BEVEL, MITER AND DADO
|
| 10" Radial Arm Saw, 1-1/2hp, 120/240v
...plus other(s)
|
|
|
|
Machinery - Scroll Saws
|
PROXXON TWO SPEED SCROLLSAW EXCELS AT INTERNAL CUTS IMPOSSIBLE TO MAKE WITH BAND OR CIRCULAR SAWS
|
| 2 Speed Bench Top Scroll Saw
|
THE PERFECT MACHINE FOR TOOL AND DIE MAKING, MODEL BUILDING, TOY REPAIRS, PUZZLE SAWING, ARCHITECTURAL WORK, ANTIQUE RESTORATION AND MORE, THE PROXXON MODEL 38 092 TWO SPEED SCROLLSAW CAN BE USED ON WOOD, ACRYLICS, FIBERGLASS, POLYSTYRENE FOAM, RUBBER, LEATHER AND CORK:
120V, 900/1,500 SPM SUPER QUIET MOTOR. 15.75" THROAT DEPTH; 2" WOOD CUT DEPTH; 1.2" PLASTICS; 0.4" NON-FERROUS METALS. AIR BLOWER WITH ADJUSTABLE NOZZLE PROVIDES CLEAR CUT LINE VISIBILITY. 14.25" X 7.1" ALUMINUM DIE CAST TOP; (TABLE TILTS UP TO 45° FOR MITER CUTS). CAST IRON BASE FOR VIBRATION FREE OPERATION AND STABILITY. 11.8" X 20.9" X 11" OVERALL. INCLUDES FIVE COARSE AND FIVE FINE BLADES, T-ALLEN KEY, ADAPTER TO CONNECT VACUUM CLEANER OR DUST EXTRACTOR AND INSTRUCTION MANUAL. WEIGHS 44 LBS. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
122-681 - THE NEW SCROLL SAW HANDBOOK© - CLICK HERE. 122-822 - CREATIVE SCROLL SAW SEGMENTATION© - CLICK HERE. 825-343 - CLASSIC FRETWORK SCROLL SAW PATTERNS© - CLICK HERE.
|
|
|
|
Machinery - Scroll Saws
|
WOODTEK 24" SCROLL SAW
|
| 24" Scroll Saw
|
WITH A WOODTEK® 24" BENCHTOP SCROLLSAW YOU GET A HEAVY DUTY MACHINE BACKED UP BY A SOLID, CAST IRON TABLE AND BODY FOR ROCK SOLID, SMOOTH CUTTING
LARGER THROAT PROVIDES GREATER CAPACITY WHILE TWO CUTTING SPEEDS ADD VERSATILITY. WRENCH FREE BLADE THREADING AND CHANGING. ADJUSTABLE DUST BLOWER KEEPS CUTTING LINE FREE OF CHIPS AND DUST. SAWBLADES AND INSTRUCTION MANUAL INCLUDED. ONE YEAR PARTS AND WORKMANSHIP WARRANTY. IMPORTED.
SPECIFICATIONS:
MOTOR - 1/8HP, 120V, 2.2A, 1PH - (POWER CORD AND PLUG INCLUDED). ON/OFF SWITCH - PUSH BUTTON, MECHANICAL - KEYED FOR SAFETY. BLADE SPEED - 860 AND 1,720 CSPM. SAWBLADE - 5" LONG, PIN OR PLAIN END. TABLE - 20-5/8" X 11-1/8" W/2-1/2" DIA. X 1/8" THICK REMOVABLE INSERT. TABLE TILTS 45° LEFT. MAXIMUM THROAT DEPTH - 24-1/2". MAXIMUM CUT DEPTH @ 90° - 2-1/2". MAXIMUM CUT DEPTH @ 45° - 13/16". OVERALL DIMENSIONS - 15-1/4"H X 34-1/2"W X 13-1/4"D. NET WEIGHT - 75 LBS. SHIPPING WEIGHT - 90 LBS. NOTE: ALTHOUGH DEEMED ACCURATE, SPECIFICATIONS ARE NOT GUARANTEED.
WE STOCK MORE THAN 5,000 WOODTEK® PARTS IN OUR WYOMING WAREHOUSE. EXPERIENCED TECHNICIANS READY TO ASSIST YOU - SAME DAY SHIPPING ON MOST ORDERS. 1-800-545-9663, M-F, 7AM-4PM, MOUNTAIN TIME.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681. CREATIVE SCROLL SAW SEGMENTATION© - 122-822. CLASSIC FRETWORK SCROLL SAW PATTERNS© - 825-343.
|
|
|
|
Machinery - Scroll Saws
|
EXCALIBUR PRECISION SCROLL SAWS HAVE TILTING HEADS FOR WORKPIECE STABILITY
|
| 21" Scroll Saw + Stand + Foot Switch
...plus other(s)
|
THE EXCALIBUR EX-21 VS 21" SCROLL SAW HAS A HEAD THAT TILTS 45º LEFT AND RIGHT, TILTING THE BLADE, NOT THE TABLE, KEEPING THE WORKPIECE LEVEL FOR BETTER CONTROL AND MORE ACCURATE CUTS:
TABLE TILTS ON DUAL TRUNNIONS WITH A PIN LOCATOR FOR COMMON ANGLES. MAKE PRECISE CUTS IN MATERIAL UP TO 2" THICK. 13-1/2" X 23-1/2" SOLID STEEL TABLE HAS ZERO MAINTENANCE ANTI-FRICTION COATING. 400-1550 STROKES/MINUTE VARIABLE SPEED, 120V, 1.3A MOTOR (115VAC INPUT REQUIRED). QUICK BLADE CHANGES WITH FINGER OPERATED BLADE CLAMPS. NO TOOLS REQUIRED; (USES UNPINNED 5" SCROLL SAW BLADES). EASY ACCESS SPEED AND TENSION CONTROLS. ONBOARD DUST BLOWER. 32"L X 15"W X 15"H. 65 LBS. NET WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681.
|
|
|
|
Machinery - Scroll Saws
|
DELTA® 20" VARIABLE SPEED SCROLL SAW IS LOADED WITH FEATURES
|
| 20" Vs Scroll Saw W/stand & Work Lamp
...plus other(s)
|
|
DELTA'S VERY FIRST PRODUCT WAS A SMALL HAND-CRANK SCROLL SAW BACK IN THE 1920S. NOW DELTA IS RETURNING TO ITS ROOTS WITH THE 40-695 20" VARIABLE SPEED SCROLL SAW. IT'S LOADED WITH FEATURES, AND BACKED BY DELTA'S 5-YEAR WARRANTY. DUAL PARALLEL-LINK ARM INCREASES ACCURACY BY KEEPING THE BLADE PERPENDICULAR TO THE TABLE AND REDUCING VIBRATION AND NOISE. TOOL FREE BLADE CLAMP ALLOWS THE BLADE TO BE CHANGED IN SECONDS. UP-FRONT CONTROLS GIVE THE USER CONVENIENT ACCESS TO ON/OFF SWITCH, SPEED CONTROL, AND BLADE TENSIONING LEVER. ELECTRONIC VARIABLE SPEED CAN BE ADJUSTED FROM 400-1,750 SPM FOR A WIDE ARRAY OF CUTTING APPLICATIONS. OVERSIZED WOODWORKER'S TABLE PROVIDES EXCELLENT MATERIAL SUPPORT AND BEVELS 0°-45 ° LEFT AND RIGHT. FLEXIBLE WORK LIGHT ILLUMINATES THE WORK SURFACE FOR BETTER VISIBILITY. HEAVY-DUTY ALL-METAL STAND PROVIDES A SOLID WORKSTATION FOR THE SAW AND KEEPS WORK BENCHES CLEAR FOR OTHER USES. MACHINE STAND, WORK LIGHT, AND TWO BLADES INCLUDED. 5-YEAR WARRANTY.
|
|
|
|
Machinery - Scroll Saws
|
EXCALIBUR PRECISION SCROLL SAWS HAVE TILTING HEADS FOR WORKPIECE STABILITY
|
| 30" Scroll Saw W/tilting Table
...plus other(s)
|
THE EXCALIBUR EX-30 VS 30" SCROLL SAW HAS A HEAD THAT TILTS 45º LEFT AND RIGHT, TILTING THE BLADE, NOT THE TABLE, KEEPING THE WORKPIECE LEVEL FOR BETTER CONTROL AND MORE ACCURATE CUTS:
CUT TO THE CENTER OF 5' LONG WORK PIECES WITH THE 30" THROAT. MAKE PRECISE CUTS IN MATERIAL UP TO 2" THICK. TABLE TILTS ON DUAL TRUNNIONS WITH A PIN LOCATOR FOR COMMON ANGLES. LARGE 14" X 32-1/2" SOLID STEEL TABLE HAS ZERO MAINTENANCE ANTI-FRICTION COATING. 400-1550 STROKES/MINUTE VARIABLE SPEED, 120V, 1.3A MOTOR (115VAC INPUT REQUIRED). QUICK BLADE CHANGES WITH FINGER OPERATED BLADE CLAMPS. NO TOOLS REQUIRED; (USES UNPINNED 5" SCROLL SAW BLADES). EASY ACCESS SPEED AND TENSION CONTROLS. ONBOARD DUST BLOWER. 43-1/4"L X 15-1/2"W X 15-1/4"H. 114 LBS. NET WEIGHT. TWO YEAR MANUFACTURER'S WARRANTY. CANADA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681.
|
|
|
|
Machinery - Scroll Saws
|
DEWALT® 20" SCROLL SAW CUTS VIBRATION TO CUT MORE PRECISELY
|
| 20" Vs Scroll Saw
...plus other(s)
|
THE HEAVY DUTY DEWALT® MODEL DW788 20" SCROLL SAW FEATURES A DOUBLE PARALLEL LINK ARM TO SIGNIFICANTLY REDUCE VIBRATION, NOISE AND BLADE BREAKAGE, RESULTING IN EXTREMELY ACCURATE CUTS:
120VAC, 1.3A, 400-1,750 SPM MOTOR - 3/4" STROKE LENGTH. 20" THROAT WITH 2" CUT DEPTH. TOOL FREE BLADE CLAMP USES 5" PLAIN END BLADES. MECHANICAL ON/OFF SWITCH, ELECTRONIC VARIABLE SPEED CONTROL, FLEXIBLE DUST BLOWER AND BLADE TENSIONING LEVER ON FRONT UPPER ARM FOR ADDED CONVENIENCE. 19-1/4" X 26-1/2" CAST IRON "TEARDROP" TABLE TILTS 45°, LEFT AND RIGHT. HEX WRENCH, BLADES AND INSTRUCTION MANUAL INCLUDED. 56 LBS. NET WEIGHT; 64.5 LBS. SHIPPING WEIGHT. OPTIONAL DW7880 SCROLL SAW STAND IS ALL METAL CONSTRUCTION AND HAS ADJUSTABLE LEGS. OPTIONAL DW7881 SCROLL SAW LIGHT HAS FLEXIBLE NECK FOR EASY POSITIONING (25W BULB INCLUDED). ONE YEAR MANUFACTURER'S WARRANTY. IMPORTED.
SET 963-322 AVAILABLE FOR LIMITED TIME. SET INCLUDES 913-819 20 VARIABLE-SPEED SCROLL SAW, 914-078 SCROLL SAW STAND AND 914-085 SCROLL SAW WORKLIGHT.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
THE NEW SCROLL SAW HANDBOOK© - 122-681.
|
|
|
|
Portable Power Tools Cordless - Circular Saw
|
BOSCH 24V 6-1/2" CIRCULAR SAW KIT LETS YOU CUT ALMOST ANYWHERE
|
| 1660k 24v 6-1/2" Saw
|
THE BOSCH 1660K 24V 6-1/2" CIRCULAR SAW KIT INCLUDES AN 18-TOOTH CARBIDE BLADE, RIP FENCE, ONE 2.4 AMP BATTERY, ONE-HOUR CHARGER AND HEAVY DUTY CASE:
3,600 RPM MOTOR 5/8" ARBOR. 2-1/8" CUT DEPTH AT 90°; 1-5/8" AT 45°. 9.2 LBS. NET WEIGHT; 24 LBS. SHIPPING WEIGHT. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Advanced Search Tools
Browse
will
