|
|
|
Hand Tools - Carving Tools
|
START OUT RIGHT WITH THIS SIX PIECE WOODCARVING SET
|
| 6 Pc Woodcarving Set
|
IDEAL FOR BEGINNERS, THE 7" LONG TOOLS IN THIS CROWN SIX PIECE WOODCARVING SET FEATURE HIGH QUALITY, HARDENED AND TEMPERED CARBON STEEL BLADES FITTED TO STAINED BEECH HANDLES:
SET INCLUDES 5/16" SQUARE CHISEL, 5/16" BENT SQUARE CHISEL, 5/16" SKEW CHISEL, 3/16" STRAIGHT GOUGE, 5/16" BENT GOUGE AND A 3/16" BENT V-TOOL. ENGLAND.
|
|
|
|
Hand Tools - Chisels
|
SLICE TOUGH GRAIN CLEANLY AND REACH WHERE REGULAR WOOD CHISELS CAN'T
|
| 3/4" Skew Chisel Set
...plus other(s)
|
CLEAN OUT TIGHT CORNERS IN MORTISES OR DADOES OR USE THESE QUALITY 1/2", 3/4" OR 1" SKEW CHISELS TO CLEANLY SLICE WILD, CURLY GRAINS:
ROSEWOOD HANDLES HAVE BRASS FERRULES TO HOUSE POLISHED SHEFFIELD STEEL BLADES. EACH SET OF TWO HAS A RIGHT AND LEFT HAND SKEW. OVERALL LENGTH ABOUT 12". ENGLAND.
|
|
|
|
Hand Tools - Chisels
|
CORNER CLEARING CHISELS GO WHERE OTHERS CAN'T
|
| 3" X 1/4" Corner Cleaning Chisel
|
|
DOG LEG CORNER CLEARING CHISELS ARE IDEAL FOR CLEANING CORNERS, GROOVES AND MOLDINGS AND WORK WHERE NORMAL CHISELS CAN'T. TWO-PIECE SET (LEFT AND RIGHT HAND) HAS ROSEWOOD HANDLES. ENGLAND.
|
|
|
|
Hand Tools - Chisels
|
HARD TO FIND CRANK-NECK PARING CHISELS AVAILABLE IN UPDATED DESIGN
|
| 1/4" Cranked Paring Chisel
...plus other(s)
|
IN THE PAST, CRANK-NECK PARING CHISELS WERE A STAPLE IN MOST CABINETMAKERS' TOOL BOXES. THESE TOOLS HAVE BEEN SCARCE IN RECENT YEARS BUT ARE NOW AVAILABLE:
4-1/2" BLADES ARE BEVELED AND POLISHED SHEFFIELD STEEL WITH A 15° OFSET FROM THE PLANTATION GROWN ROSEWOOD HANDLES. THIS ALLOWS THE BLADES TO LIE FLAT ON THE WORK SURFACE AND YOUR HANDS TO STAY CLEAR. ESPECIALLY WELL SUITED FOR CLEANING DADOS. CHISELS FITTED WITH BRASS FERRULE FOR DURABILITY. FINAL HONING REQUIRED. ENGLAND.
|
|
|
|
Hand Tools - Chisels
|
COMPACT BUTT CHISELS PROVIDE SUPERB CONTROL
|
| 4 Piece Butt Chisel Set
|
THE 1/4", 1/2", 3/4" AND 1" COMPACT BUTT CHISELS IN THE CROWN HAND TOOLS MODEL 174RB FOUR PIECE SET ARE IDEAL FOR VERY PRECISE HAND CUTTING AND JOINT PARING:
SHORTER LENGTHS MAKE THEM EASIER TO USE THAT STANDARD BENCH CHISELS - 3-1/3"L HANDLES, 2-1/2"L BLADES. POLISHED, BEVELED SHEFFIELD STEEL BLADES WITH SOLID ROSEWOOD HANDLES AND BRASS FERRULES. HONE BLADES BEFORE USE. ENGLAND.
|
|
|
|
Hand Tools - Chisels
|
EUROPEAN QUALITY, FOUR PIECE BEVEL CHISEL SET AT A REASONABLE PRICE
|
| Set 4 Bevel Edge Chisels
...plus other(s)
|
MADE TO WOODWORKER'S SUPPLY SPECIFICATIONS IN ENGLAND, THE FOUR PIECE BEVEL CHISEL SET FEATURES PLANTATION GROWN ROSEWOOD HANDLES, BRASS FERRULES AND POLISHED STEEL BLADES:
HANDLES ARE 5-1/2" LONG - 1/4", 1/2", 3/4" AND 1" WIDE BLADES VARY FROM 5" TO 5-3/4" LONG (FINAL HONING REQUIRED). CHISELS CAN ALSO BE ORDERED, SEPARATELY.
|
|
|
|
Hand Tools - Chisels
|
CROWN MORTISE CHISELS
|
| 1/4" Mortise Chisel
...plus other(s)
|
THESE DURABLE MORTISE CHISELS FEATURE HIGH CARBON SHEFFIELD STEEL BLADES:
SOLID ASH HANDLES WITH LEATHER WASHERS AT TANGS TO ABSORB SHOCK. STEEL FERRULES ADD STRENGTH TO HELP AVOID MUSHROOMING AND SPLITTING. SELECT FROM SEVEN WIDTHS; SAVE BY ORDERING THE FOUR PIECE SET, WHICH INCLUDES 1/4", 1/2", 3/4" AND 1" CHISELS. HONE BEFORE USE. ENGLAND.
|
|
|
|
Hand Tools - Chisels
|
SUPER DURABLE CROWN MORTISE CHISELS
|
| Set Of 4 Chisels
...plus other(s)
|
THESE DURABLE MORTISE CHISELS FEATURE HIGH CARBON SHEFFIELD STEEL BLADES:
SOLID ASH HANDLES WITH LEATHER WASHERS AT TANGS TO ABSORB SHOCK. STEEL FERRULES ADD STRENGTH TO HELP AVOID MUSHROOMING AND SPLITTING. SELECT FROM SEVEN WIDTHS; SAVE BY ORDERING THE FOUR PIECE SET, WHICH INCLUDES 1/4", 1/2", 3/4" AND 1" CHISELS. HONE BEFORE USE. ENGLAND.
|
|
|
|
Hand Tools - Cutting
|
TRADITIONAL 12" ENGLISH BOW SAW MADE WITH THE FINEST BEECH
|
| 12" English Bowsaw
...plus other(s)
|
THE TRADITIONAL MODEL 195X 12" ENGLISH BOW SAW FROM CROWN TOOLS IS MADE FROM THE FINEST BEECH AND THEN STAINED FOR A DURABLE FINISH:
RESHARPENABLE 12" HIGH CARBON STEEL BLADE HAS 10 TPI. ENGLAND.
|
|
|
|
Hand Tools - Cutting
|
HIGH QUALITY HAND SAWS ROUND OUT ANY WOODSHOP
|
| Flush Cutting Saw 20 T.p.i.
...plus other(s)
|
THESE HIGH QUALITY HAND SAWS WERE SPECIFICALLY MADE TO WOODWORKER'S SUPPLY® SPECIFICATIONS BY CROWN TOOLS TO MEET THE NEEDS OF DISCERNING WOODWORKERS:
24" RIP SAW (7TPI) AND 22" PANEL SAW (10TPI) FEATURE GLAZED AND POLISHED BLADES - TAPER GROUND FROM NICKEL CHROME ALLOY STEEL, HARDENED AND TEMPERED, TENSIONED AND SPRUNG. TEETH ARE SET AND SHARPENED. POLISHED, STAINED BEECH HANDLES SECURED WITH SCREWS. 12" TENON SAW (15TPI) AND 8" DOVETAIL SAW (20TPI) HAVE GLAZED AND POLISHED BLADES, HARDENED, TEMPERED, TENSIONED AND STIFFENED WITH HAND-POLISHED BRASS BACKS. HANDLES SECURED WITH BRASS SCREWS. 6" GENT'S SAW HAS STRAIGHT BEECH HANDLE WITH BRASS BACK. THE HANDIEST SAW AT YOUR BENCH WITH 15TPI! 8" GENT'S SAW HAS PLANTATION-GROWN ROSEWOOD HANDLE (ALSO 15TPI). 6-1/2" FLUSH CUT SAW (20TPI) FEATURES REVERSE TEETH TO CUT ON THE PULL STROKE - PERFECT FOR CUTTING DOWELS. 10" REVERSIBLE OFFSET SAW (14TPI) LETS YOU FLUSH CUT, LEFT OR RIGHT, BY ROTATING THE BLADE. OLSON® ADJUSTABLE FRET SAW USES 2-1/2" TO 6" PLAIN END SCROLL SAW BLADES (NOT INCLUDED) AND HAS A BLADE TENSIONING END SCREW.
|
|
|
|
Hand Tools - Not Listed Elsewhere
|
MARKING KNIVES IMPROVE ACCURACY
|
| Right Hand Marking Knife
...plus other(s)
|
MARKING KNIVES PRODUCE A VERY FINE LINE FOR ACCURATE LAYOUT:
BLADES ARE BEVELED ON ONE SIDE ONLY TO CLOSELY FOLLOW A STRAIGHT EDGE. SHEFFIELD STEEL BLADES FITTED WITH COMFORTABLE ROSEWOOD HANDLES. 6" OVERALL LENGTH; 3/4" X 2" BLADE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
NEED SMALL HAND TOOLS TO FIT SMALL PROJECTS?
|
| Miniature Block Plane
...plus other(s)
|
USING PLANTATION GROWN ROSEWOOD ALONG WITH BRASS FITTINGS, THESE EXQUISITELY SIZED SMALL HAND TOOLS CAN BE USED FOR MODEL MAKING, INSTRUMENT MAKING OR FINE WORK ON ANY PROJECT:
DESIGNED TO THE SAME HIGH STANDARDS AS THEIR LARGER COUNTERPARTS, THESE TOOLS PERFORM EXTREMELY WELL. 952-024, 952-017, 952-010 - PLANES ARE ABOUT 3" LONG. 103-535 - TORPEDO LEVEL IS 4-1/4" LONG. 103-547 - TRY SQUARE HAS A 4" BLADE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
ENGLISH PATTERN DRAWKNIVES FOR OLD WORLD FINISHING
|
| Bent Draw Knife 11"x1-5/8"
...plus other(s)
|
CROWN TOOLS' ENGLISH PATTERN DRAWKNIVES ARE MANUFACTURED FROM CAREFULLY HARDENED AND TEMPERED HIGH CARBON STEEL:
BOTH FEATURE 10" LONG BLADES WITH BEECH HANDLES AND BRASS FERRULES. 113-057 - MODEL DKB HAS HANDLES IN LINE WITH THE BACK OF THE BLADE FOR GREATER CONTROL AND A SLIGHT CURVE TO SPEED STOCK REMOVAL. 119-663 - MODEL DK IS A STRAIGHT-BLADED OR LONDON PATTERN CARPENTER'S DRAWKNIFE WITH HANDLES FIXED AT 90° TO THE EDGE. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
SHAVEHOOKS FIT WHERE CABINET SCRAPERS CAN'T REACH
|
| 3 Pc Shavehook Set
|
EXCELLENT FOR SCRAPING IN TIGHT PLACES, THE THREE SHAVEHOOKS IN THIS CROWN TOOLS' SHAVEHOOK SET FEATURE HARDENED AND TEMPERED STEEL BLADES, RIVETED TO SHANKS, WHICH RUN THE FULL LENGTH OF SPECIALLY SHAPED BEECH HANDLES:
TRIANGLE, PEAR AND COMBINATION SHAPES, EACH SHAVEHOOK IS 7-1/2" LONG. ENGLAND.
|
|
|
|
Hand Tools - Scraping & Shaping
|
"ONE PASS" BURNISHER MAKES IT EASY TO TURN A PERFECT BURR ON A SCRAPER EDGE
|
| Scraper Burnisher
|
CABINET SCRAPERS WITH 90° EDGES CAN BE USED FOR LIGHT SCRAPING WORK. HOWEVER, TO REMOVE MORE MATERIAL, YOU'LL NEED THE "ONE PASS" BURNISHER TO TURN A BURR ON THE SCRAPER'S EDGE:
3/8" DIA. X 6"L BURNISHER SHAFT IS HIGH QUALITY HIGH SPEED STEEL WITH A COMFORTABLE, PLANTATION GROWN ROSEWOOD HANDLE. TO BURNISH, HOLD SCRAPER FIRMLY IN A PADDED BENCH VISE, APPLY A SMALL AMOUNT OF LUBRICANT ON THE EDGE AND, WHILE HOLDING BURNISHER AT AN ANGLE, RUN IT ALONG THE EDGE OF THE SCRAPER USING MINIMAL PRESSURE. A LIGHT PASS AT 85° WILL TURN A PERFECT BURR ON A HONED SCRAPER BLADE. THE GREATER THE ANGLE THE MORE MATERIAL WILL BE REMOVED; 5° IS SUITABLE FOR FINE FINISHING, WHILE 10° OR MORE CAN BE USED FOR PAINT AND LACQUER REMOVAL. ENGLAND.
|
|
|
|
Hand Tools - Striking
|
WOODWORKER'S SUPPLY® SUPERBLY BALANCED BEECH MALLETS
|
| 4" Solid Beech Mallet
...plus other(s)
|
THE HIGHEST QUALITY, THESE WOODWORKER'S SUPPLY® BALANCED BEECH MALLETS ARE IDEAL FOR WORKING WITH CHISELS, GOUGES OR CARVING TOOLS:
FINELY SANDED AND UNFINISHED. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN MICRO PARTING TOOL
|
| 1/16" Thin Parting Tool
|
THE CROWN MICRO PARTING TOOL HAS A THIN 1/16" CHISEL POINT TIP THAT WORKS ESPECIALLY WELL IN PARTING SMALLER PROJECTS AND WHERE A VERY SMALL CUTTING POINT IS REQUIRED FOR TEXTURING AND DETAIL WORK:
HIGH SPEED STEEL BLADE WITH FINELY FINISHED BEECH HANDLE. 9-1/2" OAL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' WEDGE TURNING TOOL MAKES SUPERB COVES AND MORE
|
| 3/8" Wedge Tool
...plus other(s)
|
GREAT FOR COVES ON SPINDLE OR FACEPLATE WORK, CROWN TOOLS' WEDGE TURNING TOOL IS ALSO EFFECTIVE FOR FINE FINISHING CUTS ON SMALL BOWLS AND GOBLETS:
8-1/2" HIGH SPEED STEEL BLADE; BEECH HANDLE WITH BRASS FERRULE; APPROXIMATELY 15" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
CROWN TOOLS' 3 POINT TURNING TOOL
|
| 3/8" Three Point Tool
...plus other(s)
|
A UNIQUE, MULTI-PURPOSE TOOL THAT CAN BE USED AS A SKEW, CROWN TOOLS' 3 POINT TURNING TOOL IS ALSO EFFECTIVE FOR END GRAIN PLANING, SHOULDER WORK, BEADING, FACEPLATE AND OTHER SPINDLE WORK:
HIGH SPEED STEEL BLADE WITH 4-1/2" BEECH HANDLE AND BRASS FERRULE; 10-1/4" OVERALL. ENGLAND.
|
|
|
|
Hand Tools - Turning
|
SKEWJY GOUGE IS A MULTIPURPOSE TURNING TOOL
|
| 3/8" Skewjy Gouge
...plus other(s)
|
THE "ALAN BEECHAM" SKEWJY GOUGE PERFORMS THE FUNCTIONS OF BOTH A SKEW AND A GOUGE WITH A REDUCED CHANCE OF "CATCH":
3/8" THICK HIGH SPEED STEEL CUTTER. 19-1/2" OVERALL TOOL LENGTH. VERSATILE TURNING TOOL WORKS EQUALLY WELL ON HARD AND SOFT WOODS. ENGLAND.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
