|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 2" X 20" AND 2" X 72" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 2"x72" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 2" X 20" AND 2" X 72" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 2" X 20" AND 2" X 72" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 4" X 36" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 4"x36" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 4" X 36" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 4" X 36" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 1" X 30" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 1"x30" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 1" X 30" BELTS ARE AVAILABLE IN GRIT RANGE 36-400 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 1" X 30" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 3" X 21" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 3"x21" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 3" X 21" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 3" X 21" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 3" X 24" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 3"x24" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 3" X 24" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 3" X 24" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 4" X 24" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 4"x24" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 4" X 24" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 4" X 24" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 6" X 48" AND 6" X 80" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 6"x48" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 6" X 48" AND 6" X 80" BELTS ARE AVAILABLE IN GRIT RANGE 36-220 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 6" X 48" AND 6" X 80" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 1" X 42" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 1"x42" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 1" X 42" BELTS ARE AVAILABLE IN GRIT RANGE 36-400 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 1" X 42" BELT. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 6" X 89" AND 6" X 108" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 6"x89" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 6" X 89" AND 6" X 108" BELTS ARE AVAILABLE IN GRIT RANGE 36-220 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 6" X 89" AND 6" X 108" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 3" X 23-3/4" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 3"x23-3/4" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 3" X 23-3/4" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 3" X 23-3/4" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 3" X 18" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 3"x18" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 3" X 18" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 3" X 18" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 2-1/2" X 16" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 2-1/2"x16" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 2-1/2" X 16" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 2-1/2" X 16" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 4" X 21" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 4"x21" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 4" X 21" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 4" X 21" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 4" X 21-3/4" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 4"x21-3/4" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 4" X 21-3/4" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 4" X 21-3/4" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 37" X 60" AND 37" X 75" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 37"x60" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 37" X 60" AND 37" X 75" BELTS ARE AVAILABLE IN GRIT RANGE 36-220 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 37" X 60" AND 37" X 75" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 36" X 60" AND 36" X 75" AND ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 36"x60" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 36" X 60" AND 36" X 75" BELTS ARE AVAILABLE IN GRIT RANGE 36-220 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 36" X 60" AND 36" X 75" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 4" X 90" AND 4" X 132" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 4"x132" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 4" X 90" AND 4" X 132" BELTS ARE AVAILABLE IN GRIT RANGE 36-220 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 4" X 90" AND 4" X 132" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 2-1/4" X 80" AND 2-1/2" X 14" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 2-1/4"x80" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 2-1/4" X 80" AND 2-1/2" X 14" BELTS ARE AVAILABLE IN GRIT RANGE 36-320 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. THE BEST BELTS FOR GENERAL WOODWORKING. 2-1/4" X 80" AND 2-1/2" X 14" BELTS. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ 25" X 60" ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 25"x60" Alox 80x Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. THE 25" X 60" BELTS ARE AVAILABLE IN GRIT RANGE 36-220 (SEE SIZES FOR SPECIFIC GRITS). MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. 25" X 60" BELTS. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Abrasives - Belts/aluminum Oxide (x-weight)
|
A&H ABRASIVES™ ALUMINUM OXIDE RESIN-BOND OPEN-COAT SANDER BELTS
|
| 3/4"x93-1/2" Alox 80y Sanding Belt
...plus other(s)
|
A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. A&H ABRASIVES BELTS ARE MADE FROM THE FINEST QUALITY MATERIALS. THE PREMIUM GRADE FRIABLE ALUMINUM OXIDE BREAKS AWAY IN USE TO EXPOSE NEW SHARP EDGES. THE ABRASIVE IS BONDED TO THE X-WEIGHT CLOTH BACKING WITH INDUSTRIAL STRENGTH PROPRIETARY RESINS IN AN OPEN COAT (50-80% GRAIN COVERAGE) ARRANGEMENT TO ALLOW MAXIMUM STOCK REMOVAL WITH MINIMUM LOADING. THE X-WEIGHT BACKING IS "TRIPLE FLEXED" WHICH ENHANCES FLEXIBILITY AND DOES NOT INTERFERE WITH BELT INTEGRITY. THE BELTS FEATURE BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS THAT CAN BE RUN IN EITHER DIRECTION INCREASING THE TOTAL SERVICE LIFE OF THE BELT. MADE IN WYOMING, USA WITH COMPONENTS FROM USA AND NORTH AMERICA.
PREMIUM ALUMINUM OXIDE GRAIN DELIVERS SHARP AND DURABLE PERFORMANCE. RESIN BOND ANCHORS THE ABRASIVE TO THE BACKING FOR LONGER BELT LIFE. X-WEIGHT COTTON CLOTH BACKING IS TEAR RESISTANT AND DISSIPATES HEAT FOR COOLER SANDING. THE BEST BELTS FOR GENERAL WOODWORKING. BI-DIRECTIONAL, HIGH-STRENGTH, NO-BUMP, URETHANE-BONDED MYLAR® BUTT JOINTS.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
