|
|
|
Fasteners - Knock Down (kd)
|
MOD-EEZ™ CONCEALED PANEL FASTENERS
|
| Semi Lckng Clips 2.285x.525x.44
...plus other(s)
|
THE MOD-EEZ® FASTENER SYSTEM USES A SPRING STEEL CLIPS COUPLED WITH SHOULDER SCREWS TO FORM STRONG CONCEALED JOINTS. THE SPRING CLIPS ARE MORTISED IN TO PANEL EDGES AND THE SHOULDER SCREWS ARE DRIVEN INTO PANEL FACES:
SPRING STEEL MAKES THE JOINTS STRONG YET FLEXIBLE. SLIDING THE SHOULDER SCREW HEAD DOWN THE CLIP ASSEMBLES THE SYSTEM. DIMENSIONAL CHANGES IN JOINED MATERIAL WILL NOT RUPTURE OR LOOSEN JOINTS. FASTENERS HOLDING THE JOINT ARE TOTALLY CONCEALED. AVAILABLE IN BAGS OF 100 OR IN KITS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
931-261 - #8 X 1-1/4" ROUND WASHER HEAD SCREW (931-261) FOR CLIPS MOUNTED ONTO SHEET ROCK EDGES. 946-133, 946-140 - #8 X 5/8" OR #8 X 3/4" TRUSS HEAD SCREWS FOR SHALLOW INSTALLATIONS.
|
|
|
|
Hardware Hinges - Concealed
|
THESE BLUM® HINGES HANDLE DOORS UP TO 30MM THICK
|
| 95d F/o Hinge Td Cliptp Screw-on
...plus other(s)
|
THESE SELF CLOSING, NICKEL PLATED STEEL BLUM® CLIP TOP™ HINGES FEATURE THREE DIMENSIONAL ADJUSTMENT, INCLUDING SPIRAL-TECH™ CAM DEPTH ADJUSTMENT BUILT INTO THE HINGE ARM:
95° OPENING ANGLE - USE FOR FRAMELESS PANEL OR FACE FRAME CONSTRUCTION. SCREW ON, PRESS IN OR TOOL FREE (INSERTA™) MOUNTING. ALL CLIP TOP™ HINGES COMPATIBLE WITH CLIP SERIES MOUNTING PLATES. SCREW ON HINGES AND MOUNTING PLATES REQUIRE #6 X 5/8" FLAT HEAD SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
EURO HINGE SCREWS #6X5/8" - 858-228.
|
|
|
|
Hardware Hinges - Concealed
|
THESE BLUM® SPECIAL APPLICATION HINGES HANDLE DOORS UP TO 1" THICK IN FRAMELESS OR FACE FRAME APPLICATIONS
|
| 110d F/o Spec App Hinge-screw-on
...plus other(s)
|
THESE SELF CLOSING, NICKEL PLATED STEEL BLUM® CLIP TOP™ HINGES FEATURE THREE DIMENSIONAL ADJUSTMENT, INCLUDING SPIRAL-TECH™ CAM DEPTH ADJUSTMENT BUILT INTO THE HINGE ARM:
CHOOSE THIS SERIES OF CLIPTOP™ HINGES FOR A WIDER OPENING ANGLE (110°) THAN STANDARD THICK DOOR HINGES. WORK FOR DOORS 3/4", 7/8" OR 1" THICK. MINIMUM REVEALS INCREASE AS DOOR THICKNESS INCREASES. SCREW ON, PRESS IN OR TOOL FREE (INSERTA™) MOUNTING. ALL CLIP TOP™ HINGES COMPATIBLE WITH CLIP SERIES MOUNTING PLATES. SCREW ON HINGES AND MOUNTING PLATES REQUIRE #6 X 5/8" FLAT HEAD SCREWS (SOLD SEPARATELY). LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
#6 X 5/8 SCREWS - 828-558.
|
|
|
|
Hardware Table - Table Locks
|
HIGH QUALITY TABLE LEAF LEVELER/LOCK MECHANISMS AT VERY LOW PRICES
|
| 8" Table Leaf Leveler/lock
...plus other(s)
|
DESIGNED FOR EASY ONE HANDED OPERATION, THE SUNLINE HARDWARE LEVELER/LOCK USES A POSITIVE ACTION, 3/16" DIA. STEEL PIN TO LOCK AND UNLOCK TABLE LEAVES:
TURN PIN HANDLE AND PULL TOWARDS YOURSELF TO UNLOCK - TABLE LEAVES WILL BE READY TO SEPARATE. ONCE LEAVES ARE BACK TOGETHER, PUSH THE PIN FORWARD UNTIL THE NYLON LATCH ASSEMBLY SNAPS TOGETHER - LEAVES WILL BE FIRMLY LOCKED. TO INSTALL, SIMPLY MOUNT THE ASSEMBLED UNIT ONTO THE BOTTOM OF THE TABLETOP, FASTENING THE OUTER NYLON SEGMENT TO ONE LEAF AND THE INNER SEGMENT AND RETAINING CLIP TO THE OTHER. FOUR #8 FLATHEAD AND ONE #8 PANHEAD SCREWS RECOMMENDED (NOT INCLUDED). USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Layout And Measuring - Squares & Straight Edges
|
USE YOUR SQUARE AS A MARKING GAUGE AND RULER AS A BEAM COMPASS
|
| Flat Lying Trammel Compass Set
...plus other(s)
|
IDEAL WHENEVER YOU NEED TO DRAW OR CUT AN ACCURATE CIRCLE. THATS ONE WHERE THE FINISHING POINT ACTUALLY MEETS THE STARTING POINT. M.POWERS FLAT LYING TRAMMEL HEAD SET WILL GUARANTEE YOU EXACTLY THAT. SIMPLY CLIP THE TWO TRAMMEL SCRIBE HEADS ONTO ANY LENGTH OF STEEL OR ALUMINIUM RULE FROM 6 INCH TO 6 FEET IN LENGTH. CHOOSE THE PENCIL OR THE HYPER FINE CUTTING BLADE AND STRIKE THAT ARC.
SET INCLUDES: (2) QUALITY DIE CAST ELECTRO COATED TRAMMEL HEADS, STEEL PIVOT POINT, PRE-SET ANGLED STEEL BLADE POST, (6)SEGMENT REPLACEMENT BLADE, ALLAN KEY AND PENCIL. EASY TO LOCK POINTS ARE ECCENTRIC TO ALLOW FOR PRECISE SETTINGS. IMPORTED
|
|
|
|
Machinery Accessories - Jigs And Fixtures
|
ANGLE°PERFECT III™ WITH ZERO CLIP™
|
| Angle Perfect Iii With Zero Clip
|
AP-3 ANGLE°PERFECT III™ WITH ZERO CLIP™ IS THE ONLY MEASUREMENT TOOL YOU'LL NEED TO SET UP THE SIX CRITICAL ELEMENTS OF TABLESAW ALIGNMENT, PLUS IT IS IDEAL FOR ENSURING JOINTER BLADES ARE EXACTLY LEVEL:
WHEN PUT INTO CONTACT WITH THE SAWBLADE, THE BUILT-IN LED LIGHTS WHEN PERFECT CUTTING ANGLES ARE SET. A SIMILAR APPROACH DETERMINES IF RIP FENCES OR MITER GAUGES NEED ALIGNMENT. ZERO CLIP™ ALLOWS THE SAME PRECISION WHEN SETTING JOINTER KNIVES. SIMPLY PLACE THE MAGNETIC BASE ONTO THE FEED TABLE, ROCK THE CUTTERHEAD AND READ THE LED. INCLUDES 3V BATTERY AND COMPLETE INSTRUCTIONS. 2-1/8"H X 2"W X 7-1/2"L; 12.8 OZ. ONE-YEAR MANUFACTURER'S WARRANTY. USA.
IF YOU ARE INTERESTED IN THIS TOOL, YOU MIGHT BE INTERESTED IN:
ANGLE°PERFECT III™ & BLADEGAUGE III™ COMBO KIT - 147-875.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.