|
|
|
Fasteners - Knock Down (kd)
|
INTERCHANGEABLE CONNECTOR BOLTS
|
| 1/4-20x13mm(jcd) Steel Cross Dowel
...plus other(s)
|
A COMPLETE SYSTEM OF INTERCHANGEABLE JOINT FASTENERS FOR ALMOST ANY APPLICATION - JUST DRILL HOLES, INSTALL THE FEMALE COMPONENTS AND SCREW THE JOINTS TOGETHER. STRONG ENOUGH FOR CABINETRY, FURNITURE, FIXTURES AND MORE. FINISHED PROJECTS CAN BE KNOCKED DOWN AND REBUILT FOR EASY TRANSPORTATION AND INSTALLATION:
FEMALE COMPONENTS: STEEL DOWEL NUT - JCD - 1/4-20 X 13MM LONG: INSTALLS INTO A HOLE DRILLED AT A RIGHT ANGLE TO THE BOLT - CROSS SLOT FOR EASIER BOLT ALIGNMENT. USE WITH BC OR BA BOLTS. CONNECTOR NUT - JCN - 1/4-20 X 12MM LONG: USE WITH BC BOLT WHERE BOTH SIDES OF CONNECTION ARE EXPOSED. STATUARY BRONZE FINISH.
MALE COMPONENTS: STRAIGHT SHANK BOLT - BC - 13MM (33/64") DIA. HEAD; REQUIRES 4MM HEX DRIVE. LOW PROFILE HEAD, 1/4-20 THREAD AND STATUARY BRONZE FINISH. CONNECTOR BOLT WITH SHOULDER - BA - 17MM (11/16") DIA. HEAD; REQUIRES 5MM HEX DRIVE. 8.9MM (23/64") DIA. SHOULDER, 1/4-20 THREAD AND STATUARY BRONZE FINISH. SMALL HEAD SCREW - CW - 13MM (33/64") DIA. LOW PROFILE HEAD, 6MM THREAD; REQUIRES 4MM HEX DRIVE: DESIGNED TO CONNECT COMPONENTS AT RIGHT ANGLES STATUARY BRONZE FINISH BLENDS WITH OTHER KNOCK DOWN COMPONENTS."
|
|
|
|
Fasteners - Wood Screws
|
DESIGNED BY A CABINET MAKER, ZINC PLATED POWERHEAD SCREWS GIVE YOU OPTIONS
|
| Powerhead Screws #10x2-1/2"
...plus other(s)
|
PATENT PENDING FASTCAP™ POWERHEAD CABINET INSTALLATION SCREWS HAVE BEEN ENGINEERED WITH NIBS TO MAKE COUNTERSINKING EASIER:
IDEAL FOR USE WITH AN IMPACT DRIVER, #8 SCREWS HAVE 9/16" DIA. HEADS THAT WON'T PULL THROUGH. #2 SQUARE DRIVES, TYPE 17 POINTS - 2-1/2" OR 3" LONG.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
FASTCAP™ COVER CAPS - 922-006.
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE FLAT HEAD ASSEMBLY SCREWS
|
| #8x1" Fh Star Drive Screw T20
...plus other(s)
|
INCREASED BIT LIFE, BETTER BATTERY LIFE FOR CORDLESS DRIVERS AND VIRTUALLY NO TWIST OFF MAKE THESE THE IDEAL GENERAL PURPOSE FLAT HEAD FASTENERS. THE SIX-LOBED STAR DRIVE RECESS HANDLES MORE DRIVING TORQUE THAN PHILLIPS OR SQUARE DRIVE REDUCING CAMOUT DAMAGE TO FASTENERS AND DRIVER BITS.
INTERIOR GRADE MULTIPURPOSE SCREWS WORK EQUALLY WELL IN HARD AND SOFT WOODS, COMPOSITES AND OTHER TOUGH MATERIALS. HEAT TREATED, HARDENED STEEL SCREWS HAVE YELLOW ZINC COATING TO RESIST CORROSION. DEEP, WIDE, SHARP THREADS AND PROPER THREAD ANGLE LET SCREWS CUT CLEANLY WITHOUT CRUMBLING OR CRUSHING OF WOOD FIBERS. TYPE 17 AUGER POINT ALLOWS SCREWS TO START QUICKLY WITHOUT A PILOT HOLE IN MOST MATERIALS. TRUE FLAT HEAD WITH 16 CUTTING NIBS SELF COUNTERSINKS EVEN IN HARD OR BRITTLE MATERIALS AND PREVENTS SPINOUT. KNURLED SHOULDERS (ON SCREWS OVER 1-1/2" IN LENGTH) REAM HOLE IN BOARD BEING FASTENED REDUCING DRAG ON SHANK AND DRIVING TOOL. AVAILABLE IN SIZES FROM #8X1" TO #10X6" TO ACCOMMODATE A WIDE RANGE OF FASTENING APPLICATIONS.
FOR OTHER STAR DRIVE STYLES:
154-400 - POCKET HOLE SCREWS. 154-424 - FINISH SCREWS. 154-448 - CABINET INSTALLATION SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE POCKET HOLE SCREWS
|
| #7x1-1/4" Star Crse Pockt Hole T20
...plus other(s)
|
STAR DRIVE POCKET HOLE SCREWS CAN HANDLE HIGH TORQUE DRIVING MAKING FACE FRAME JOINTS SOLID AND SECURE. ROUND WASHER HEADS SEAT FIRMLY IN POCKET HOLE RECESSES FOR STRONG JOINTS.
HEAT TREATED, HARDENED STEEL SCREWS HAVE A DRY LUBED BRONZE FINISH. SELF STARTING TYPE 17 AUGER POINT. COARSE THREAD STYLES FOR SOFT WOODS AND COMPOSITES. FINE THREAD STYLES FOR USE IN HARD OR BRITTLE WOODS. AVAILABLE IN #7X1-1/4" OR #7X1-1/2" IN BOXES OF 100 OR 1000. USE T-20 DRIVER BIT.
FOR OTHER STAR DRIVE STYLES:
154-292 - FLAT HEAD ALL PURPOSE SCREWS. 154-424 - FINISH SCREWS. 154-448 - CABINET INSTALLATION SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE FINISH SCREWS
|
| #7x1-5/8"star Finish Screw T10
...plus other(s)
|
STAR DRIVE FINISH SCREWS HAVE A SELF COUNTERSINKING HEAD AND THE SIX-LOBED STAR RECESS HANDLES MORE TORQUE AND GIVES BETTER BIT LIFE THAN PHILLIPS OR SQUARE DRIVES:
DEEP, WIDE, SHARP THREADS SET AT THE PROPER ANGLE LET SCREWS CUT CLEANLY WITHOUT CRUMBLING OR CRUSHING WOOD FIBERS REDUCING SPLITTING AND CRACKING. TYPE 17 AUGER POINT STARTS SCREWS QUICKLY WITHOUT THE NEED FOR A PILOT HOLE IN MOST MATERIALS. KNURLED SHOULDERS REAM HOLE IN BOARD BEING FASTENED REDUCING DRAG ON SHANK AND DRIVING TOOL. HEAD DIAMETER IS .204 AND FEATURES NIBS THAT ALLOW THE SCREWS TO SELF-COUNTERSINK EVEN IN HARD OR BRITTLE MATERIALS. HOLES ARE EASILY COVERED BY COMMON WOOD FILLERS. NO NEED FOR PLUGS. #7 SHANK SIZE AND LENGTHS FROM 1-5/8" TO 3". YELLOW ZINC COATING PROVIDES A DURABLE, TARNISH RESISTANT FINISH. USE T10 DRIVER.
FOR OTHER STAR DRIVE STYLES:
154-292 - FLAT HEAD ALL PURPOSE SCREWS. 154-400 - POCKET HOLE SCREWS. 154-448 - CABINET INSTALLATION SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
STAR DRIVE CABINET INSTALLATION SCREWS
|
| #10x2-1/2" Star Cabinet Screw T25
...plus other(s)
|
STAR DRIVE CABINET INSTALLATION SCREWS FEATURE A LARGE WASHER HEAD WITH A SIX LOBED RECESS DRIVE WHICH HANDLES MORE TORQUE THAN PHILLIPS OR SQUARE DRIVE SCREWS.STAR DRIVE OFFERS A MORE POSITIVE CONNECTION BETWEEN DRIVER BIT AND SCREW HEAD REDUCING CAMOUT AND INCREASING THE EFFECTIVE BATTERY LIFE OF CORDLESS DRIVERS. INTERIOR GRADE MULTIPURPOSE SCREWS WORK EQUALLY WELL IN HARD AND SOFT WOODS, COMPOSITES AND OTHER TOUGH MATERIALS.
HEAT TREATED, HARDENED STEEL SCREWS HAVE YELLOW ZINC COATING TO RESIST CORROSION. DEEP, WIDE, SHARP THREADS AND PROPER THREAD ANGLE LET SCREWS CUT CLEANLY WITHOUT CRUMBLING OR CRUSHING OF WOOD FIBERS. TYPE 17 AUGER POINT ALLOWS SCREWS TO START QUICKLY WITHOUT A PILOT HOLE IN MOST MATERIALS. LARGE ROUND WASHER HEAD GIVES MAXIMUM HOLDING POWER IN HEAVY LOAD APPLICATIONS. SMOOTH SHANK ABOVE THREADS. AVAILABLE IN #10X2-1/2" OR #10X3" IN PACKAGES OF 50 OR 250./
FOR OTHER STAR DRIVE STYLES:
154-292 - FLAT HEAD ALL PURPOSE SCREWS. 154-400 - POCKET HOLE SCREWS. 154-424 - FINISH SCREWS. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST
INSERT DRIVER BITS - 154-028."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® QUICKCUTTERS™ CABINET INSTALLATION SCREWS
|
| #10x2-1/2 Rwh-co Qc Install Zp
...plus other(s)
|
QUICKCUTTERS™ CABINET INSTALLATION SCREWS FEATURE THE "ORIGINAL" DOUBLE AUGER FOR FASTER DRIVING:
ROUND WASHER HEAD GIVES A LARGE BEARING SURFACE TO PREVENT PULL OUT. TYPE 17 AUGER POINT FOR QUICKER PENETRATION. QUICKCUTTER™DOUBLE AUGER THREAD FOR FAST THREADING AND SUPERIOR HOLDING POWER. SMOOTH SHANK FOR BETTER DRAW DOWN AND TIGHTER SEATING. #10 SCREWS IN 2-1/2" TO 4" LENGTHS. ROUND WASHER HEAD WITH COMBINATION SQUARE/CROSS RECESS DRIVE. PLAIN ZINC OR WHITE ENAMEL PAINTED HEADS (945-606, 945-613, 945-620, 945-627) FOR MELAMINE INSTALLATION. IMPORTED."
|
|
|
|
Fasteners - Wood Screws
|
QUICKSCREWS® QX2™ HEAVY DUTY CABINET INSTALLATION SCREWS
|
| #14x2-1/2 Rwh-p3 Qx2 Install Zp
...plus other(s)
|
HIGH STRENGTH QX2™ CABINET INSTALLATION SCREWS HAVE BEEN SPECIFICALLY DESIGNED TO WORK IN EITHER WOOD OR METAL STUDS:
COMBINATION HI-LO THREAD DESIGN - HI THREAD FOR GREATER HOLDING POWER IN WOOD STUDS, LO THREAD FOR GREATER HOLD AND REDUCED BINDING IN METAL STUDS. #3 PHILLIPS, 1/2" DIA. ROUND WASHER HEAD. ZINC FINISH. SELF PIERCING POINT FOR INSTANT STARTING AND QUICKER PENETRATION. SMOOTH SHANK FOR BETTER DRAW DOWN. FOUR LENGTHS. SOLD IN BAGS OF 100."
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
BLUM® CABINET LEVELING SYSTEM HANDLES UNEVEN FLOORS
|
| Cabinet Leveler-screw-on
...plus other(s)
|
FROM BLUM®, THIS SYSTEM LETS YOU LEVEL CABINETS UP TO 850 POUNDS QUICKLY AND EASILY. USE THE COMPLETE SYSTEM OF LEVELERS, TOE-KICK CLIPS AND COVER CAPS TO BEST FIT YOUR NEEDS :
LEVELERS ADJUST FROM 3-3/4" TO 5-1/2" TO ACCOMMODATE UNEVEN FLOORING. 850-POUND WEIGHT CAPACITY. LEVELERS ARE BLACK ABS PLASTIC CONSTRUCTION. SCREW ON LEVELERS MOUNT THROUGH A 10MM HOLE BORED IN THE CABINET BASE. ADJUSTMENTS MUST BE MADE AT THE BASE OF THE LEVELER. PRESS-IN LEVELERS MOUNT INTO A 30MM DIAMETER X 12MM DEEP BORE IN THE BOTTOM OF THE CABINET BASE. ADJUSTMENTS CAN BE MADE THROUGH THE CABINET BOTTOM. TOE KICK CLIPS SNAP ON TO LEVELING LEGS FOR SIMPLE INSTALLATION. TOE KICK CLIPS ARE AVAILABLE WITH EITHER SCREW-ON OR PRESS IN MOUNTING PLATES. OPTIONAL WHITE NYLON COVER CAPS FIT INTO MOUNTING SCREWS OR INTO ADJUSTMENT HOLE IN PRESS-IN LEGS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
30MM FORSTNER BIT - 913-700. 10MM BRAD POINT BIT- 944-161 .
|
|
|
|
Hardware Drawer Slides - Roller Metal Box
|
SINGLE EXTENSION STEEL DRAWER SYSTEM OFFERS QUICK, EASY ASSEMBLY
|
| 400mm(16") X 85mm(3-3/8") System
...plus other(s)
|
BUILD AND ASSEMBLE DRAWERS WITH A MINIMUM OF EFFORT USING THE HARN® IMPAZ 4020/4021, 3/4 EXTENSION DRAWER SYSTEM:
SELF-CLOSING, SMOOTH ROLLING DRAWER SLIDES LOCK INTO POSITION WHEN EXTENDED AND HAVE A DOUBLE OUT-STOP SAFETY FEATURE; 66 LBS. LOAD CAPACITY. SYSTEM INCLUDES LEFT AND RIGHT, WHITE EPOXY COATED STEEL CABINET MOUNTING MEMBERS, SLIDES AND DRAWER SIDE PANELS. AVAILABLE IN 16", 18", 20" OR 22" LENGTHS WITH 3-3/8" (85MM), 4-5/8" (117MM) OR 5-7/8" (149MM) HIGH DRAWER SIDES. YOU PROVIDE 5/8" THICK DRAWER FRONT, BACK AND BOTTOM MATERIAL AND DRAWER FRONT MOUNTING BRACKETS REQUIRED FOR INSTALLATION. INTERNAL BRACKETS (SOLD IN PAIRS) ALLOW USE BEHIND DOORS, SUCH AS IN A VANITY OR STEREO CABINET. CLIP-ON/SCREW-ON BRACKETS (SOLD IN PAIRS) MAKE REGULAR INSTALLATION AND ADJUSTMENT SIMPLE. DRAWER FRONT MARKING JIG AND BOTTOM/BACK DRILLING TEMPLATE SIMPLIFY ASSEMBLY AND PROVIDE GREATER ACCURACY.
|
|
|
|
Hardware Hinges - Specialty
|
BRASS KNIFE HINGES IN TWO POPULAR STYLES FROM BRUSSO®
|
| 5/16" Straight Knife Hinge
...plus other(s)
|
MILLED FROM SOLID BRASS, BRUSSO® STRAIGHT KNIFE AND L-HINGE OFFSET CABINET HINGES FEATURE HAND FITTED PINS TO ENSURE SMOOTH OPERATION:
STRAIGHT KNIFE HINGES ARE USED WHEN A MINIMUM OF VISIBLE HARDWARE IS REQUIRED OR WHEN BUTT HINGES ARE INAPPROPRIATE. THEY ARE MORTISED INTO THE TOP AND BOTTOM OF THE DOOR AND INTO THE FRAME. L-HINGE USE AND INSTALLATION ARE SIMILAR, HOWEVER, THE PIVOT PROJECTS FROM THE CABINET. 2" X 5" HINGE WILL ACCOMMODATE STANDARD INTERIOR DOORS. SOLD IN PAIRS WITH APPROPRIATE MOUNTING SCREWS INCLUDED. USA.
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.