|
|
|
Bits Drill And Boring - Accessories
|
BLUM® CABINET PROFILE DRILLING TEMPLATE ACCURATELY LOCATES HARDWARE WITHOUT AN EXPENSIVE BORING MACHINE
|
| Cabinet Profile Drilling Jig
|
|
THE 1 METER LONG RAIL OF THE BLUM® CABINET PROFILE DRILLING TEMPLATE CLAMPS DIRECTLY TO THE CABINET SIDE. FOUR TEMPLATES CAN BE ADJUSTED ALONG THE LENGTH OF THE RAIL TO ACCURATELY LOCATE HOLES FOR TANDEM™ DRAWER SLIDES, AVENTOS™ LIFT SYSTEMS LOCATING PINS AND HINGE MOUNTING BASEPLATES. GUIDE CAN BE MOVED FROM LEFT TO RIGHT SIDE OF CABINET WITHOUT CHANGING SETUPS TO ASSURE UNIFORMITY IN BORING.
|
|
|
|
Bits Drill And Boring - Accessories
|
BLUM UNIVERSAL INDIVIDUAL TEMPLATE MAKES CABINET HARDWARE SETUP SIMPLE AND ACCURATE
|
| Universal Individual Template
|
THE UNIVERSAL INDIVIDUAL TEMPLATE™ ALLOWS YOU TO USE YOUR CORDED OR CORDLESS DRILL TO ACCURATELY MARK AND BORE MOUNTING HOLES FOR A WIDE VARIETY OF COLOR=#FF9900>BLUM® CABINET HARDWARE.
EASILY ADJUSTS AND LOCKS TO GIVE PROPER SETBACK FOR AVENTOS ™ LOCATING PINS, TANDEM™ AND TANDEMBOX™ RUNNERS, HINGE MOUNTING PLATES AND BLUMOTION™ AND TIP-ON™ ADAPTER PLATES. SET INCLUDES UNIVERSAL INDIVIDUAL TEMPLATE,2.5MM AND 5MM STOP COLLARS FOR TWIST BITS (BITS NOT INCLUDED). AUSTRIA
|
|
|
|
Fasteners - Mechanical Fasteners
|
QUICK CLIP SPEEDS CABINET AND COUNTERTOP CONSTRUCTION
|
| Quick Clip Fastener
...plus other(s)
|
THE CORNA HARDWARE QUICK CLIP IS A FAST AND EASY WAY TO JOIN TOGETHER CABINETS, COUNTERTOPS, TABLE TOPS OR PANELS:
SIMPLY FASTEN CLIP ONTO ONE COMPONENT USING ATTACHED NAILS AND DRIVE A SCREW THROUGH THE ANGLED HOLE INTO THE SECOND COMPONENT, JOINING BOTH TOGETHER. SOLD IN BAGS OF 25 OR 100. AUSTRALIA.
|
|
|
|
Hardware Casters And Glides - Adjustable Glides
|
CABINET LEVELING SYSTEM DESIGNED TO SUPPORT HEAVY LOADS
|
| Set - Pair Of Cabinet Levelers
...plus other(s)
|
ENSURE ACCURATE CABINET LEVELING AND STUDY SUPPORT USING MEIER MODEL 300-Z2-Z2 HEAVY DUTY LEVELERS, WHICH PROVIDE AN IMPRESSIVE 330-LB. LOAD CAPACITY, EACH:
HEIGHT ADJUSTS A FULL INCH USING 6MM HEX WRENCH (SOLD SEPARATELY). 1-1/2" DIA. BASE FEATURES METAL INSERT AND LARGE FLOATING ABS FOOT. MOUNTING HARDWARE, WHITE COVER PLUGS AND COMPLETE INSTRUCTIONS INCLUDED. SOLD IN PAIRS OR INDIVIDUALLY.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HF BIFOLD LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SMOOTH, SILENT CLOSING FOR OVERHEAD CABINET DOORS
|
| Aventos Hf Mechanism 85-470pf
...plus other(s)
|
SPECIFICALLY DESIGNED FOR TOP-HINGED, BI-FOLD OVERHEAD CABINET DOORS, THE UNIQUE BLUM® AVENTOS HF BI-FOLD LIFT SYSTEM MAKES EVEN A HEAVY DOOR FEEL WEIGHTLESS. THE DOOR CAN BE OPENED EASILY OR LEFT AT ANY HEIGHT; RELEASE THE DOOR AND THE SOFT-CLOSING BLUMOTION MECHANISM LETS IT DOWN SMOOTHLY AND GENTLY:
SYSTEM WORKS WITH ALL COMMON DOOR WIDTHS AND HEIGHTS BY USING COMBINATIONS OF ONE, TWO OR THREE LIFT MECHANISMS AND ASSOCIATED TELESCOPIC ARMS. ASSEMBLES QUICKLY USING CLIP TECHNOLOGY - DOORS CAN LATER BE REMOVED AND REATTACHED WITHOUT TOOLS. SETTING PROPER TENSION FOR OPENING AND CLOSING POWER IS QUICK AND PRECISE. CABINET DOORS ADJUST IN ALL 3 DIMENSIONS. WORKS WITH WOOD OR ALUMINUM FRAME DOORS IN FACE FRAME OR FRAMELESS APPLICATIONS. USE 156-719 HARDWARE KIT FOR STANDARD WOOD DOORS OR WIDE ALUMINUM DOORS. ADD 156-722 BRACKET SET FOR FACE FRAME OR WIDE OVERLAY APPLICATIONS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HF™ BROCHURE PRIOR TO STARTING INSTALLATION. REQUEST A COPY FROM YOUR SALES REPRESENTATIVE OR VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
AVENTOS HK STAY LIFT SYSTEM FOR FRAME OR FRAMELESS CONSTRUCTION BRINGS SOFT CLOSING TO WALL OR ACCENT CABINETS
|
| Aventos Hk Lift 43-99pf
...plus other(s)
|
WITH THE UNIQUE BLUM® AVENTOS HK STAY LIFT SYSTEM THE DOOR FRONT LIFTS UP EASILY, REMAINS IN ANY POSITION AND CLOSES SILENTLY USING THE INTEGRATED BLUMOTION MECHANISM - IDEAL FOR APPLICATIONS ABOVE REFRIGERATORS, ACCENT CABINETS OR WALL CABINETS:
WORKS WITH CABINETS UP TO 48" WIDE AND 9-7/16" TO 24" HIGH; CLEARS CROWN MOLDING UP TO 4" HIGH. TO CHOOSE THE CORRECT LIFT MECHANISM, YOU NEED TO DETERMINE THE CORRECT "POWER FACTOR" (PF). MULTIPLY YOUR CABINET DOOR HEIGHT IN INCHES X THE DOOR WEIGHT IN POUNDS (INCLUDING TWICE THE HANDLE WEIGHT), E.G., IF THE RESULTING "PF" IS BETWEEN 100 AND 174, YOU WOULD SELECT MECHANISM 20K2500.NA. MECHANISM SETS COME WITH TWO LIFT ARMS, RIGHT AND LEFT COVER PLATES, TWO COVER CAPS AND WOOD SCREWS AND ASSEMBLE QUICKLY USING CLIP TECHNOLOGY. WOOD/WIDE ALUMINUM DOOR HARDWARE SET IS REQUIRED TO FASTEN YOUR CABINET DOOR ONTO THE LIFT ARMS. INCLUDES FOUR MOUNTING PLATES (TWO WITH BRACKETS), MOUNTING SCREWS AND #2X2 POZI DRIVER BIT FOR ADJUSTING TENSION. OPTIONAL REDUCTION CLIP KEEPS LIFT MECHANISM FROM OPENING ITS FULL 107°. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HK™ BROCHURE PRIOR TO STARTING INSTALLATION. VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HL PARALLEL LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SMOOTH, SILENT CLOSING FOR UPPER CABINET DOORS
|
| Aventos Hl Lift 20l2100.na
...plus other(s)
|
DESIGNED FOR DOORS THAT OPEN UP AND PARALLEL TO THE CABINET FACE, THE BLUM® AVENTOS HL CAN BE USED IN A WIDE VARIETY OF APPLICATIONS INCLUDING WALL CABINETS AND COUNTER TOP APPLIANCE GARAGES. SMOOTH OPENING AND SOFT CLOSING WITH THE INCORPORATED BLUMOTION™.
SYSTEM COVERS ALL COMMON DOOR WIDTHS AND HEIGHTS USING FIVE DIFFERENT LIFT MECHANISMS AND 4 ARM ASSEMBLIES. SUITABLE FOR CABINET WIDTHS UP TO 48 AND FOR CABINET HEIGHTS FROM 11-7/8 TO 22-3/4. WORKS WITH EITHER FACE FRAME OR FRAMELESS CABINET DESIGNS. QUICK AND EASY ASSEMBLY AND REMOVAL WITH CLIP TECHNOLOGY. COMPONENTS SNAP TOGETHER AND LOCK IN PLACE. SIMPLE 3-WAY ADJUSTMENT OF DOORS TO ASSURE PERFECT FIT. INTEGRATED TENSION ADJUSTMENT WITH CALIBRATED SCALE TO COMPENSATE FOR DOOR WEIGHT. USE 156-683 HARDWARE KIT TO MOUNT STANDARD WOOD DOORS AND WIDE ALUMINUM DOORS. ADD 156-677 MOUNTING BRACKETS FOR FACE FRANE AND WIDE OVERLAY APPLICATIONS. A CROSS STABILIZER BAR CAN BE INCORPORATED INTO WIDE DOOR APPLICATIONS TO ASSURE SMOOTH OPERATION. SYSTEM INCLUDES A SPECIAL ARM ASSEMBLY, 20L3900 FOR APPLIANCE GARAGE APPLICATIONS IN EITHER FACE FRAME OR FRAMELESS CABINETS. THE CORNER APPLIANCE GARAGE BRACKET SET IS DESIGNED TO ACCURATELY LOCATE THE AVENTOS™ ARM ASSEMBLY IN APPLIANCE GARAGE CABINETS. IT IS RECOMMENDED THAT YOU REFER TO THE AVENTOS HL BROCHURE PRIOR TO STARTING INSTALLATION. VIEW THE .PDF VERSION OF THE BROCHURE BELOW.
|
|
|
|
Hardware Closing Mechanisms - Door Supports & Stays
|
BLUM® AVENTOS HS UP AND OVER LIFT SYSTEM PROVIDES EFFORTLESS OPENING AND SILENT CLOSING FOR UPPER CABINET DOORS.
|
| Aventos Hs 'a' Lift 14-20"
...plus other(s)
|
DESIGNED FOR DOORS THAT OPEN UP AND OVER THE TOP OF UPPER CABINETS. BLUM® AVENTOS HS™ PROVIDES SMOOTH OPENING AND INTEGRATED BLUMOTION™ SOFT, SILENT CLOSING FOR TOP HINGED WALL CABINET DOORS.
SYSTEM COVERS ALL COMMON DOOR WIDTHS AND HEIGHTS USING NINE DIFFERENT LIFT MECHANISMS AND A SINGLE ARM ASSEMBLY. SUITABLE FOR CABINET WIDTHS UP TO 48 AND FOR CABINET HEIGHTS FROM 13-3/4 TO 32. WORKS WITH EITHER FACE FRAME OR FRAMELESS CABINET DESIGNS. QUICK AND EASY ASSEMBLY AND REMOVAL WITH CLIP TECHNOLOGY. COMPONENTS SNAP TOGETHER AND LOCK IN PLACE. SIMPLE 3-WAY ADJUSTMENT OF DOORS TO ASSURE PERFECT FIT. INTEGRATED TENSION ADJUSTMENT ALLOWS FINE TUNING FOR VARIABLE DOOR WEIGHT. A CUT-TO-LENGTH CROSS STABILIZER ROD AND MOUNTING BRACKET KIT ARE REQUIRED FOR ALL APPLICATIONS. IT IS SUGGESTED THAT YOU READ THE AVENTOS HS™ BROCHURE PRIOR TO BEGINNING INSTALLATION. (REQUEST ONE FROM YOUR PHONE SALES REPRESENTATIVE OR VIEW THE .PDF VERSION BELOW.
|
|
|
|
Hardware Closing Mechanisms - Friction Lid Supports
|
CRESCENT FRICTION LID SUPPORTS
|
| R.h.crescent Lid Support
...plus other(s)
|
DESIGNED FOR SHALLOW CABINETS WHERE A STRAIGHT SUPPORT MIGHT BE TOO LONG, CRESCENT FRICTION LID SUPPORTS ARE MADE FROM BRASS PLATED STEEL:
5" ARM LENGTH (MOUNTING SCREWS INCLUDED). SUPPORTS ARE NOT REVERSIBLE. IMPORTED.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
STATE OF THE ART LIFT-O-MAT® GAS SPRINGS PROVIDE EFFORTLESS ACCESS
|
| 100n Silver-lift-o-mat
...plus other(s)
|
STABILUS LIFT-O-MAT® GAS SPRINGS ARE FOR CABINET DOORS OR LIDS THAT OPEN UPWARD - GAS FILLED SPRINGS SMOOTHLY OPEN TO 90° AND PROVIDE SOFT AND QUIET CLOSING. DOORS OR LIDS ARE SECURELY HELD IN THE OPEN OR CLOSED POSITION.
IDEAL FOR OVERHEAD KITCHEN CABINETS, OFFICE CABINETRY, BLANKET CHESTS AND MORE. TWO GAS FILLED SPRINGS, FOUR END FITTINGS AND COMPLETE INSTRUCTIONS INCLUDED (MOUNTING SCREWS NOT INCLUDED) - EASY TO INSTALL AND MAINTENANCE FREE. SELECT MODEL 100N FOR 10"-24" HIGH DOORS, WEIGHING 5-7 LBS.; 8-10 LB. DOORS, 10"-18" TALL; OR 10"-15" DOORS, WEIGHING 11-13 LBS. USE 150N WITH 8-10 LB., 19"-24" HIGH DOORS; 16"-24" DOORS, WEIGHING 11-13 LBS.; OR 10"-18" TALL DOORS, WEIGHING 14-20 LBS. GERMANY.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
DAMPER SYSTEM ADDS SOFT CLOSING FEATURE TO SELF CLOSING CABINET DOORS
|
| Smove Cyl For 200/b/f-beige
...plus other(s)
|
THE SALICE SMOVE DAMPER SYSTEM USES SMALL CYLINDERS TO ABSORB THE PRESSURE FROM SELF CLOSING CABINET DOORS AND ELIMINATE NOISE. AFTER A DOOR IS REOPENED, PRESSURE IS RELEASED AND THE CYLINDER PISTON MOVES FORWARD, AGAIN READY FOR USE:
CYLINDERS CAN BE PRESS MOUNTED INTO 10MM DIA. X 50MM DEEP HOLES BORED INTO CABINET FRAMES OR SURFACE MOUNTED, USING OPTIONAL ADAPTERS. FOR BEST RESULTS ON BOTH FACE FRAME AND FRAMELESS CABINETS, CYLINDERS SHOULD BE MOUNTED APPROXIMATELY 27MM FROM THE HINGE SIDE (DISTANCE CAN VARY DUE TO DOOR WEIGHT AND CLOSING PRESSURE). CABINET DOORS OVER 1,600MM (63") HIGH REQUIRE TWO SMOVE CYLINDERS. AVAILABLE IN HONEY OR BEIGE TO COMPLEMENT MOST CABINET COLORS. ITALY.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
ADD BLUMOTION™ SOFT CLOSING ACTION TO YOUR CABINET DOORS
|
| Blumotion F/doors Cylinder Only
...plus other(s)
|
BLUMOTION™ FOR DOORS INSTALLS DIRECTLY INTO CABINET PANELS (10MM DIA. X 50MM DEEP BORE) OR FASTENS ONTO PANELS OR FACE FRAMES USING CAST ZINC ADAPTERS:
CYLINDER SENSES HOW HARD THE DOOR IS BEING CLOSED AND ADJUSTS RESISTANCE TO KEEP THE DOOR FROM SLAMMING SHUT. OPTIMAL MOUNTING POSITION FOR USE WITH COMPACT™ HINGES IS TOP MOUNTED, 8"-12" FROM THE HINGE SIDE. FOR USE WITH CLIP TOP™ HINGES, THE OPTIMAL MOUNTING POSITION IS CENTERED ON THE SIDE OPPOSITE THE HINGES. BASED UPON DOOR WEIGHT, SIZE AND NUMBER OF HINGES USED, OPTIMAL MOUNTING POSITION CAN VARY. A TRIAL APPLICATION IS RECOMMENDED. FOR DOORS UP TO 24" WIDE, ONE BLUMOTION™ CYLINDER IS USUALLY SUFFICIENT. FOR TALLER OR HEAVIER DOORS, TWO MIGHT BE REQUIRED. SOLD INDIVIDUALLY OR IN BOXES OF 50. FOR EASE OF INSTALLATION, THE BLUMOTION™ DRILLING TEMPLATE IS DESIGNED FOR BORING FOR EITHER DIRECT MOUNTING INTO THE CABINET SIDE OR TO POSITION PILOT HOLES FOR THE INLINE OR WING ADAPTERS. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
SOFT CLOSING BLUMOTION 971A FOR EURO HINGES
|
| Blumotion/doors Wing Plate 0mm
...plus other(s)
|
BLUM® BLUMOTION 971A FOR HINGES OFFERS THE SAME QUALITY OF MOTION FOR CABINET DOORS AS REGULAR BLUMOTION DOES FOR DRAWER SYSTEMS:
ADJUSTABLE TO VARIOUS DOOR HEIGHTS AND WEIGHTS (+3/-7MM RANGE). INSTALL ONTO HINGE-SIDE PANEL - NICKEL PLATED STEEL CONSTRUCTION. FOR USE WITH STRAIGHT ARM HINGE AND 0MM OR 3MM MOUNTING PLATE. NOTE: DESIGNED ONLY FOR BLUM® EURO HINGES. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Closing Mechanisms - Gas Filled
|
SOFT CLOSING BLUMOTION 973A FOR EURO HINGES
|
| Blumotion- F/o 120d Hinges
...plus other(s)
|
BLUM® BLUMOTION 973A FOR HINGES OFFERS THE SAME QUALITY OF MOTION FOR CABINET DOORS AS REGULAR BLUMOTION DOES FOR DRAWER SYSTEMS:
AUTOMATICALLY ADJUSTS TO THE CLOSING FORCE OF THE DOOR. SIMPLE ATTACHMENT - NICKEL PLATED STEEL CONSTRUCTION. NOTE: DESIGNED ONLY FOR BLUM® EURO HINGES. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS CABINET KNOBS FROM BRUSSO®
|
| Mini Solid Brass Cabinet Pull
...plus other(s)
|
BRUSSO® SOLID BRASS CABINET KNOBS ARE SIMPLE IN DESIGN, YET ELEGANT IN APPEARANCE:
FLATTENED DOME FACE IS RINGED BY A BAND SHAPED EDGE. MOUNTING TENON IS PRESSURE FITTED INTO BORED HOLE AND GLUED INTO PLACE. 108-422 - MC-422 5/16 DIA.; PROJECTS 5/16 - 3/16" DIA. MOUNTING TENON. 108-425 - MC-428 7/16 DIA.; PROJECTS 3/8 - 3/16 DIA. MOUNTING TENON. 108-428 - MC-432 9/16" DIA.; PROJECTS 1/2 - 5/16 DIA. MOUNTING TENON. 108-431 - MC-434 11/16 DIA.; PROJECTS 5/8 - 3/8 DIA. MOUNTING TENON. USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID PEWTER STYLIZED KNOBS AND PULLS
|
| Sol.pewter Acorn Knob 1-5/8" X 1"
...plus other(s)
|
|
THESE UNIQUE AND EXQUISITE ACORN, DOGWOOD AND LEAF DESIGNS USING LEAD-FREE SOLID PEWTER WILL ENHANCE THE FINEST CABINETS, DRAWERS OR FURNITURE. CHOOSE BETWEEN KNOBS OR PULLS (MOUNTING SCREWS NOT INCLUDED).
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
DECORATIVE SOLID BRASS KNOBS FEATURE BRUSSO® QUALITY
|
| Solid Brass Knob-ck-101
...plus other(s)
|
BRUSSO® SOLID BRASS KNOBS ARE SUITABLE FOR CABINET DOORS OR DRAWERS. SOLD INDIVIDUALLY, EACH COMES WITH A MACHINE SCREW FOR THROUGH BOLTING:
129-950 MODEL CK-101 - 1-1/4" DIA, PROJECTS 1-3/16". 129-953 MODEL CK-102 - 1-1/4" DIA, PROJECTS 1-1/4". 129-956 MODEL CK-103 - 1-1/4" DIA, PROJECTS 1-5/16". 129-959 MODEL CK-104 - 1-1/4" DIA, PROJECTS 1-3/16". 129-962 MODEL CK-105 - 1-1/4" DIA, PROJECTS 1-5/16". USA.
|
|
|
|
Hardware Decorative - Kitchen Pulls & Knobs
|
RUSTIC IRON CABINET AND DOOR HARDWARE
|
| 'iron" Pull 96mm C/c-vp
...plus other(s)
|
DELICATE PROPORTIONS, COMBINED WITH A "SOFT ON THE EYES" FINISH, LET RUSTIC IRON CABINET AND DOOR HARDWARE WORK WITH A WIDE VARIETY OF STYLES:
BLACKENED PEWTER FINISH - ZINC BASE. 109-214 - PULL, 5-1/4" LONG X 1-3/16" WIDE, PROJECTS 15/16" - 96MM C/C. 109-217 - SPIRAL KNOB, 1-1/4" DIA. WITH 19/32" DIA. BASE, PROJECTS 7/8". 109-220 - RING PULL WITH BACK PLATE, 4" LONG X 29/32" WIDE, PROJECTS 1/2".
RUST/BLACK IRON FINISH - ZINC BASE. 109-223 - PULL, 4-1/2" LONG X 7/16" WIDE, PROJECTS 1-1/4" - 3" C/C. 109-226 - PULL, 3-3/4" LONG X 11/16" WIDE, PROJECTS 1-5/16" - 3" C/C. 109-229 - PULL, 4-15/16" LONG X 1-13/16" HIGH, PROJECTS 1" - 3" C/C. 109-232 - TWIST KNOB, 1-1/4" DIA. WITH 11/32" DIA. BASE, PROJECTS 15/16". 109-235 - OPEN KNOB, 1-1/2" DIA. WITH 5/8" DIA. BASE, PROJECTS 1-1/16". 8-32 TAPS (MOUNTING SCREWS INCLUDED). USA AND IMPORTED.
|
|
|
|
Hardware Decorative - Kitchen Pulls & Knobs
|
CLEARANCE SELECTION OF AMEROCK® CABINET PULLS AND KNOBS
|
| Class Accent Collonade Pull 3" C/c
...plus other(s)
|
|
ENHANCE THE BEAUTY OF CABINETS AND FURNITURE. 110-342, PULL, DIE CAST, 3" C/C; 4-1/4" O.A.L.; 15/16" PROJECTION 76268-OB, KNOB, 1-1/4" DIA.; 1-1/16" PROJECTION BP1420FWD, KNOB, 1-7/32" DIA; 15/16" PROJECTION. BP76268-BL14, KNOB, 1-1/4" DIA.; 1-1/16" PROJECTION. R10122, PULL, DIE CAST, 3" C/C; 5-1/8" O.A.L.; 1-1/8" PROJECTION. R10145, KNOB, 1-3/16" DIA.; 1-1/2" PROJECTION. R10191, KNOB, 1-1/4" DIA.; 1" PROJECTION. R10201, PULL, 3" C/C; 3-7/16" O.A.L.; 1-3/16" PROJECTION. R10207, PULL, 1-1/4" DIA.; 1" PROJECTION. R10208, PULL, 3" C/C; 5-1/16" O.A.L.; 1-1/8" PROJECTION. R10224, PULL W/KNOB, 3" C/C; 5-1/8" O.A.L.; 1-7/32" PROJECTION. R10269, PULL, 3" C/C; 5-7/8" O.A.L.; 1-3/8" PROJECTION. R10270, KNOB, 1-1/4" DIA.; 1" PROJECTION. R10272, KNOB, 1-1/4" DIA.; 1" PROJECTION. R40799, BACK PLATE, 1-1/2" DIA; 1/8" PROJECTION. R99848, KNOB, 1-1/4" DIA..; 1" PROJECTION LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Decorative - Kitchen Pulls & Knobs
|
STAINLESS STEEL BAR PULLS ADD A DISTINCTIVE LOOK TO CABINETS AND DRAWERS
|
| 2.36" Oal T Ss Bar Pull
...plus other(s)
|
THE DISTINCTIVE APPEARANCE AND DURABILITY OF EPCO® STAINLESS STEEL BAR PULLS COMPLEMENT CONTEMPORARY AS WELL AS TRADITIONAL DECORS:
BAR DIAMETER IS 12MM. STAINLESS STEEL MOUNTING SCREWS INCLUDED.
|
|
|
|
Advanced Search Tools
Browse
