|
|
|
Hardware Closing Mechanisms - Not Listed Elsewhere
|
BRUSSO® SOLID BRASS LID SUPPORTS - WHEN ONLY THE BEST WILL DO
|
| Small Mortised Lid Support
...plus other(s)
|
QUIET, SOLID AND SMOOTH DESCRIBE THESE IMPRESSIVE, BRUSSO® SOLID BRASS MORTISED LID SUPPORTS, DESIGNED FOR HEIRLOOM CREATIONS:
BODY IS MORTISED INTO THE SIDE AND A FLANGED CYLINDRICAL ANCHOR IS PRESSURE-FITTED AND GLUED INTO THE LID. 943-152 MODEL JB-280 - 4-5/16"L X 3/8"W X 3/4"D, 7/16" DIA. ANCHOR. 912-244 MODEL JB-250 - 2-7/8"L X 1/4"W X 1/2"D, 1/4" DIA. ANCHOR. EACH REVERSIBLE FOR RIGHT- OR LEFT-HAND APPLICATIONS (SCREWS INCLUDED). USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
SOLID BRASS CABINET KNOBS FROM BRUSSO®
|
| Mini Solid Brass Cabinet Pull
...plus other(s)
|
BRUSSO® SOLID BRASS CABINET KNOBS ARE SIMPLE IN DESIGN, YET ELEGANT IN APPEARANCE:
FLATTENED DOME FACE IS RINGED BY A BAND SHAPED EDGE. MOUNTING TENON IS PRESSURE FITTED INTO BORED HOLE AND GLUED INTO PLACE. 108-422 - MC-422 5/16 DIA.; PROJECTS 5/16 - 3/16" DIA. MOUNTING TENON. 108-425 - MC-428 7/16 DIA.; PROJECTS 3/8 - 3/16 DIA. MOUNTING TENON. 108-428 - MC-432 9/16" DIA.; PROJECTS 1/2 - 5/16 DIA. MOUNTING TENON. 108-431 - MC-434 11/16 DIA.; PROJECTS 5/8 - 3/8 DIA. MOUNTING TENON. USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
DECORATIVE SOLID BRASS KNOBS FEATURE BRUSSO® QUALITY
|
| Solid Brass Knob-ck-101
...plus other(s)
|
BRUSSO® SOLID BRASS KNOBS ARE SUITABLE FOR CABINET DOORS OR DRAWERS. SOLD INDIVIDUALLY, EACH COMES WITH A MACHINE SCREW FOR THROUGH BOLTING:
129-950 MODEL CK-101 - 1-1/4" DIA, PROJECTS 1-3/16". 129-953 MODEL CK-102 - 1-1/4" DIA, PROJECTS 1-1/4". 129-956 MODEL CK-103 - 1-1/4" DIA, PROJECTS 1-5/16". 129-959 MODEL CK-104 - 1-1/4" DIA, PROJECTS 1-3/16". 129-962 MODEL CK-105 - 1-1/4" DIA, PROJECTS 1-5/16". USA.
|
|
|
|
Hardware Decorative - Furniture Pulls & Knobs
|
BRUSSO® FLUSH MOUNT PULLS GIVE A CLEAN ELEGANT LOOK TO DOORS, DRAWERS AND CHESTS
|
| 1-1/4" Dia Flush Finger Pull
...plus other(s)
|
MACHINED FROM SOLID BRASS WITH A SATIN FINISH, BRUSSO® FLUSH MOUNT PULLS ARE MORTISED IN FOR A CLEAN APPEARANCE:
CP-125 - 1-1/4" OD; 1" DIA. BORE. CP-150 - 1-1/2" OD; 1-1/4" DIA. BORE. CP-175 - 1-3/4" OD; 1-1/2" DIA. BORE. CP-200 - 2" OD; 1-3/4" DIA. BORE. BORES SHOULD BE 1/2" DEEP. 0.090" TOP LIP. JB-766 BOX HANDLE FUNCTIONS AS A MINIATURE FINGER PULL - 3/4"H X 2-3/4"L X 3/8" THICK. SIMPLY MORTISE IN TO DEPTH OF COVE MOLDING. USE WOOD GLUE TO SECURE. USA.
|
|
|
|
Hardware Decorative - Not Listed Elsewhere
|
HOOKS AND HANGERS FOR JEWELRY BOX INTERIORS
|
| Brass Chain Post
...plus other(s)
|
ADD ELEGANT DETAIL TO BOX PROJECTS WITH BRUSSO® SMALL BOX AND CASE "JEWELRY":
MC-510 CHAIN CAROUSEL - (1-5/8" DIA.; PROJECTS 1-1/8") HAS SIX, 7/16" LONG ARMS AND IS DESIGNED TO BE MOUNTED INTO THE UPPER SURFACE OF A CABINETS INTERIOR; 3/8" DIA. BASE IS PRESSURE-FITTED AND GLUED INTO PLACE (SOLD INDIVIDUALLY). MC-437 BRASS POST - (3/8" DIA.; PROJECTS 15/16") TERMINATES IN A FLATTENED DOME RINGED BY A BAND-SHAPED EDGE; 3/16" DIA. BASE IS PRESSURE-FITTED AND GLUED INTO PLACE (SOLD INDIVIDUALLY). USA.
|
|
|
|
Hardware Hinges - Accessories
|
BRUSSO® HINGE ROUTING JIGS TAKE THE HAZARD OUT OF HINGING BOX LIDS
|
| Template For 811-418 Hinge
...plus other(s)
|
HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES. IF YOU MAKE A LOT OF BOXES, USE TWO FOR TIME SAVINGS AND BETTER ACCURACY:
105-170 - JIG FITS 936-134 & 811-418 HINGES. 105-173 - JIG FITS 811-419 & 105-164 HINGES. 105-179 - JIG FITS 936-141 & 811-425 HINGES. 105-182 - JIG FITS 105-830 HINGES. 116-468 - TEMPLATE FITS 936-148 & 811-428 HINGES.
COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED).
USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Hinges - Butt
|
BRUSSO® BUTT HINGES FOR SMALL BOXES
|
| 1-1/4"l Spans 5/16" Stop Hinge
...plus other(s)
|
BRUSSO® BUTT HINGES ARE MILLED FROM SOLID BRASS AND FEATURE A FLAWLESS SATIN FINISH:
JB-101 FULL MORTISE BUTT HINGES - (3/4" LONG X 3/32" THICK, SPANS 5/16" MATERIAL) HAVE BUILT-IN STOPS TO ALLOW LID TO REMAIN OPEN AT 95°. JB-103 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" THICK, SPAN 7/16" MATERIAL); OPERATION SIMILAR TO JB-101. JB-102 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" THICK, SPANS 5/16" MATERIAL); OPERATION SIMILAR TO JB-101. JB-804 STOP HINGES - (1-1/4" X 1-1/32, 1/8" RADIUS CORNER) PROVIDE BUILT-IN STOPS, ALLOWING LID TO REMAIN OPEN AT ABOUT 95° - USE WHEN ADDITIONAL STAYS NOT DESIRED. MORTISE FLAT INTO BOX AND LID. HINGE PINS ARE TOOL STEEL, FITTED TO PRECISION-REAMED BORES. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED)..
OPTIONAL HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES:
TJ-101 JIG - JB-101 HINGES. TJ-102 JIG - JB-102 HINGES. TJ-103 JIG - JB-103 HINGES. TJ-804 JIG - JB-804 HINGES. COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED). USA. 936-148 IS LIMITED TO QUANTITY ON HAND.
|
|
|
|
Hardware Hinges - Specialty
|
BRASS KNIFE HINGES IN TWO POPULAR STYLES FROM BRUSSO®
|
| 5/16" Straight Knife Hinge
...plus other(s)
|
MILLED FROM SOLID BRASS, BRUSSO® STRAIGHT KNIFE AND L-HINGE OFFSET CABINET HINGES FEATURE HAND FITTED PINS TO ENSURE SMOOTH OPERATION:
STRAIGHT KNIFE HINGES ARE USED WHEN A MINIMUM OF VISIBLE HARDWARE IS REQUIRED OR WHEN BUTT HINGES ARE INAPPROPRIATE. THEY ARE MORTISED INTO THE TOP AND BOTTOM OF THE DOOR AND INTO THE FRAME. L-HINGE USE AND INSTALLATION ARE SIMILAR, HOWEVER, THE PIVOT PROJECTS FROM THE CABINET. 2" X 5" HINGE WILL ACCOMMODATE STANDARD INTERIOR DOORS. SOLD IN PAIRS. USA.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® SOLID BRASS CABINET HINGES LIFT OFF FOR CONVENIENCE
|
| 2-1/2"x3/4" Left Lift Off Hinge
...plus other(s)
|
BRUSSO® LIFT OFF CABINET HINGES ARE 2-1/2" X 3/4" DURABLE SOLID BRASS, TWO KNUCKLE BUTT HINGES:
DESIGNED FOR 3/4" TO 1" THICK DOORS AND SOLD IN PAIRS OF LEFT HAND OR RIGHT HAND (PHILLIPS HEAD MOUNTING SCREWS INCLUDED). USA.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® OFFSET HINGES HANDLE LARGE LOADS
|
| 2" 'l' Knife Hinge
|
MILLED FROM SOLID BRASS, BRUSSO® L-19 OFFSET HINGES ARE USED WHEN A MINIMUM OF VISIBLE HARDWARE IS REQUIRED OR WHEN BUTT HINGES ARE INAPPROPRIATE:
MORTISE INTO THE TOP AND BOTTOM OF THE DOOR AND THE FRAME - ONLY THE PIVOT PROJECTS. LEAVES MEASURE 5" X 2" X 3/8" THICK. HINGES SOLD IN PAIRS (BRASS MOUNTING SCREWS INCLUDED); PACKAGE WEIGHS 2-1/2 LBS. USA.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® QUADRANT HINGES INCLUDE POSITIVE STOPS
|
| 1" Quadrant Hinge
...plus other(s)
|
BRUSSO® QUADRANT HINGES WITH SUPPORTS ARE PRECISION MILLED FROM SOLID BRASS AND HAVE A HIGH SATIN FINISH:
HD-638 - (1" BARREL WITH 1" X 1" LEAF) COMES WITH A BUILT-IN STOP, ALLOWING LID TO REMAIN OPEN AT 95° - ARC IS MORTISED INTO SIDE OF BOX BENEATH LEAF. HD-680 - (1-1/2" BARREL WITH 1-1/2" X 1-3/4" LEAF); OPERATION SIMILAR TO HD-638. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED). USA.
|
|
|
|
Hardware Locks And Latches - Ball & Bullet Catches
|
BRUSSO® SOLID BRASS CATCHES FOR CASES AND CHESTS
|
| 11/32" Brass Ball Catch
...plus other(s)
|
TYPICAL HIGH QUALITY FROM THE BRUSSO® HARDWARE LINE, THE MODEL JB-828 SOLID BRASS JEWELRY BOX LATCH WILL ADD BEAUTY AND ELEGANCE TO ALMOST ANY BOX PROJECT:
2"L X 3/4"W LATCH IS MORTISED INTO THE LID AND FRONT OF A BOX OR CASE. SPRING LOADED PIVOTING BAR RELEASES THE LATCH BY PRESSING ON THE BUTTON. OPTIONAL TJ-828 SOLID BRASS TEMPLATE SIMPLIFIES BOX LATCH INSTALLATION. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE TIPPED ROUTER BIT (NOT INCLUDED). BALL CATCHES HAVE MACHINED BODIES AND STRIKES WITH TOOL STEEL BALLS FOR DURABILITY AND SMOOTH PERFORMANCE. USA.
|
|
|
|
Hardware Shelf And Support - Shelf Pins
|
BRUSSO® 1/4" SOLID BRASS SHELF SUPPORTS
|
| 1/4" Solid Brass Shelf Pins
...plus other(s)
|
ADDING ELEGANT DETAIL TO BOOKSHELVES AND CABINETS, BRUSSO® K-10 1/4" SOLID BRASS SHELF SUPPORTS ARE COMPRISED OF A DECORATIVE TURNED SUPPORT AND A CYLINDRICAL PEG:
PEG IS 1/4" DIA. X 3/8" LONG; INSTALLED SHELF SUPPORT PROJECTS 7/16". USA.
|
|
|
|
Project Supplies - Jewelry Box Hdwr & Access
|
BRASS FEET FROM BRUSSO® ACCENT ALL BOX PROJECTS
|
| Template For Box Feet Hd702
...plus other(s)
|
ADDING BRUSSO® DECORATIVE BRASS BOX FEET IS ONE OF THE MOST ELEGANT WAYS TO SET OFF A NICELY MADE BOX:
JB-426 FEATURE A COMPRESSED SPHERE AND SPACING COLLAR WITH TURNED PROFILE - PRESSURE FIT AND GLUE INTO PLACE. 3/4" DIA.; PROJECTS 9/16" - 1/2" DIA. MOUNTING TENON. HD-702 HAVE A SQUARE BASE WITH RADIUSED INNER CORNER AND AN INSET BLOCK FOOT. USUALLY MORTISED INTO BOTTOM OF BOX (OPTIONAL TJ-702 TEMPLATE RECOMMENDED) AND FASTENED WITH TWO SCREWS. 7/8" X 7/8"; PROJECTS 1/4". JB-423 ARE SPHERES WITH DISK SHAPED FEET - PRESSURE FIT AND GLUE INTO PLACE. 1/2" DIA.; PROJECTS 3/8" - 5/16" DIA. MOUNTING DOWEL. BOX FEET SOLD IN SETS OF FOUR. USA.
|
|
|
|
Advanced Search Tools
Browse
