|
|
|
Hardware Hinges - Accessories
|
BRUSSO® HINGE ROUTING JIGS TAKE THE HAZARD OUT OF HINGING BOX LIDS
|
| Template For 811-418 Hinge
...plus other(s)
|
HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES. IF YOU MAKE A LOT OF BOXES, USE TWO FOR TIME SAVINGS AND BETTER ACCURACY:
105-170 - JIG FITS 936-134 & 811-418 HINGES. 105-173 - JIG FITS 811-419 & 105-164 HINGES. 105-179 - JIG FITS 936-141 & 811-425 HINGES. 105-182 - JIG FITS 105-830 HINGES. 116-468 - TEMPLATE FITS 936-148 & 811-428 HINGES.
COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED).
USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Hardware Hinges - Butt
|
ENGLISH PATTERN SOLID BRASS BUTT HINGES
|
| 3x1-5/8 Narrow Hinge-fixed Pin
...plus other(s)
|
EXTRUDED ENGLISH PATTERN SOLID BRASS BUTT HINGES HAVE NARROWER LEAVES THAN TRADITIONAL HINGES:
AVAILABLE WITH FIXED PIN, BUTTON, BALL OR DECORATOR TIPS (BUTTON, BALL AND DECORATOR TIPS ARE REMOVABLE). HIGH SATIN, LACQUERED FINISH. MINIMAL PLAY BETWEEN LEAVES FOR SMOOTHER PERFORMANCE. SOLD IN PAIRS (SOLID BRASS MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Butt
|
SOLID BRASS 4" CONTINUOUS HINGES
|
| 4x7/8 Continuous Hinge
...plus other(s)
|
|
SOLD IN PAIRS, SOLID BRASS 4" CONTINUOUS HINGES ARE HIGHLY POLISHED AND THEN LACQUERED TO PREVENT TARNISH. AVAILABLE IN TWO WIDTHS, EACH HINGE HAS A FIXED PIN. (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Butt
|
SOLID BRASS BUTT HINGES
|
| 3"x3"ball Tip Hinge-polished Brass
...plus other(s)
|
|
BALL-TIPPED SOLID BRASS BUTT HINGES FEATURE HARDENED STEEL PINS FOR DURABILITY. THREE SIZES TO FIT MOST INTERIOR APPLICATIONS - 3" X 3", 3-1/2" X 3-1/2", 4" X 4". ALL SIZES AVAILABLE IN POLISHED BRASS, ANTIQUE BRASS OR SATIN NICKEL FINISH. FINISHES WARRANTED FOR ONE YEAR. SCREW PATTERNS CAN VARY FROM ILLUSTRATION. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Butt
|
BRASS PLATED SMALL BOX HINGES
|
| 9/16"x 3/4" Brass Plated Hinge
...plus other(s)
|
SOLIDLY CONSTRUCTED BRASS-PLATED STEEL HINGES COME WITH A LACQUER FINISH TO PREVENT TARNISHING:
DIMENSIONS ARE LENGTH X OPEN WIDTH. PACKED 5 PAIR PER BAG (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Butt
|
THESE EXTRUDED SOLID BRASS HINGES FEATURE A SATIN NICKEL FINISH
|
| 3"x2" Ball Tip Hinge-sat Nickel
...plus other(s)
|
|
EXTRUDED SOLID BRASS HINGES FEATURE TIGHT FITTING LEAVES AND SMOOTH OPERATING PINS. SATIN NICKEL FINISH IS PROTECTED BY A CLEAR LACQUER TOP COAT FOR DURABILITY. TRADITIONAL BALL TIP DESIGN ENHANCES BOXES AND CABINETRY. PACKED ONE PAIR IN A POLYBAG WITH MATCHING MOUNTING SCREWS INCLUDED. IMPORTED.
|
|
|
|
Hardware Hinges - Butt
|
BRUSSO® BUTT HINGES FOR SMALL BOXES
|
| 3/4"l Spans 5/16" Stop Hinge
...plus other(s)
|
BRUSSO® BUTT HINGES ARE MILLED FROM SOLID BRASS AND FEATURE A FLAWLESS SATIN FINISH:
811-418 JB-101 FULL MORTISE BUTT HINGES - (3/4" LONG X 3/32" LEAF THICKNESS, SPANS 5/16" MATERIAL) HAVE BUILT-IN STOPS TO ALLOW LID TO REMAIN OPEN AT 95°. 811-425 JB-103 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" LEAF THICKNESS, SPAN 7/16" MATERIAL); OPERATION SIMILAR TO JB-101. 811-419 JB-102 FULL MORTISE BUTT HINGES - (1-1/4" LONG X 3/32" LEAF THICKNESS, SPANS 5/16" MATERIAL); OPERATION SIMILAR TO JB-101. 105-830 JB-804 STOP HINGES - (1-1/4" X 1-1/32, 3/16 LEAF THICKNESS, 1/8" RADIUS CORNER) PROVIDE BUILT-IN STOPS, ALLOWING LID TO REMAIN OPEN AT ABOUT 95° - USE WHEN ADDITIONAL STAYS NOT DESIRED. MORTISE FLAT INTO BOX AND LID. 936-148 CB-407 BUTT HINGE (2 X 1-1/2, 3/32 LEAF THICKNESS) HINGE PINS ARE TOOL STEEL, FITTED TO PRECISION-REAMED BORES. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED)..
OPTIONAL HINGE ROUTING JIGS, MILLED FROM SOLID BRASS, ENSURE QUICK AND PRECISE PLACEMENT OF BRUSSO® HINGES:
TJ-101 JIG - JB-101 HINGES. TJ-102 JIG - JB-102 HINGES. TJ-103 JIG - JB-103 HINGES. TJ-804 JIG - JB-804 HINGES. COMPLETE INSTRUCTIONS INCLUDED. USE 3/4" OD GUIDE BUSHING AND 1/4" CARBIDE ROUTER BIT (NOT INCLUDED). USA. 936-148 IS LIMITED TO QUANTITY ON HAND.
|
|
|
|
Hardware Hinges - Butt
|
TRADITIONAL PATTERN SOLID BRASS CABINET HINGES
|
| 1-1/2x1-1/2 Ball Tip Hinge
...plus other(s)
|
THE FINEST HINGE FOR HIGH END CABINETRY AND FURNITURE. TRADITIONAL PATTERN SOLID BRASS CABINET HINGES HAVE DECORATIVE TIPS THAT THREAD ONTO THE ENDS OF THE HINGE BARREL AND ARE INTERCHANGEABLE:
EXTRUDED LEAVES WITH PRECISION BORES TO ALLOW FOR A SOLID FIT. MINIMAL PLAY BETWEEN LEAVES REDUCES FRICTION AND WEAR. CLEAR LACQUER PRESERVES LUSTER (MOUNTING SCREWS INCLUDED). IMPORTED
|
|
|
|
Hardware Hinges - Butt
|
NON MORTISE CABINET DOOR HINGES
|
| 1-1/2x13/16 Nm Hinge-stat Brz
...plus other(s)
|
NON MORTISE CABINET HINGES ARE AN INDUSTRY STANDARD FOR INSET DOORS, LARGE AND SMALL:
THESE HINGES LEAVE ONLY A GAP OF 1/16" BETWEEN THE DOOR EDGE AND THE CABINET CASE. DIMENSIONS SHOWN ARE H X W. TIGHT PIN, PLAIN END HINGES COME IN STATUARY BRONZE OR BRASS FINISH (MOUNTING SCREWS INCLUDED)."
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® SPRING LOADED HINGES HOLD CABINET DOORS OPEN OR CLOSED
|
| S/c Var.overlay Hinge-bright Brass
...plus other(s)
|
AMEROCK® SPRING-LOADED HINGES ARE AVAILABLE IN TWO STYLES AND FOUR FINISHES TO PROVIDE MAXIMUM VERSATILITY:
INSET HINGES ARE DESIGNED FOR 3/8" INSET DOORS (RABBETED EDGE) WHILE VARIABLE OVERLAY HINGES ACCOMMODATE FULL OVERLAY DOORS. SPRING-LOADED TO CLOSE OR HOLD DOORS OPEN AT 35°. HINGES MEET OR EXCEED KMCA STANDARDS. SOLD IN PAIRS AND BULK BOXES WITH FELT BUMPERS AND MOUNTING SCREWS INCLUDED.
|
|
|
|
Hardware Hinges - Cabinet
|
SELF CLOSING PARTIAL WRAP HINGES ALLOW EASY ADJUSTMENT
|
| S/c 3/8 Inset Part Wrap-burn. Brass
...plus other(s)
|
|
TWO SLOTS IN THE FRAME WING ALLOW 3/16" VERTICAL ADJUSTMENT AFTER INSTALLATION INSET AND OVERLAY STYLES - DESIGNED TO MEET OR EXCEED KCMA STANDARDS. EXPOSED PORTION MEASURES 1-13/16" X 1/2" (MOUNTING SCREWS INCLUDED). BURNISHED BRASS FINISH EXCEPT FOR 905-620 WHICH ARE POLISHED BRASS FINISH SOLD IN PAIRS. NOTE: 801-601 AND 866-917 LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Hardware Hinges - Cabinet
|
MARATHON® SELF CLOSING KNIFE HINGES PERFORM BETTER, LAST LONGER
|
| #3 Knife Hinge-1/4" F/1/2"-burn Brass
...plus other(s)
|
MARATHON® SELF CLOSING KNIFE HINGES INCORPORATE SELF LUBRICATING, SPACE AGE POLYMER FOR FLEXIBILITY AND ENDURANCE - PERFORMANCE IS 10X GREATER THAN KCMA CERTIFICATION STANDARDS:
HIGH STRENGTH STEEL FRAME, FULL 180° OPENING, LOCATING TABS FOR QUICK POSITIONING AND ±1/16" VERTICAL AND HORIZONTAL ADJUSTMENT. INSTALL INTO 9/32" WIDE DADO CUT (SCREWS, PADS AND INSTRUCTIONS INCLUDED). THREE FINISHES TO SELECT FROM - SAVE WHEN YOU BUY IN BULK!
|
|
|
|
Hardware Hinges - Cabinet
|
AMEROCK® NON-MORTISE HINGES ALLOW A CLOSE FIT ON INSET DOORS
|
| Part Wrap-ball Tip-solid Brass
...plus other(s)
|
AMEROCK® FULL INSET, NON-MORTISE HINGES PROVIDE A CLOSE-FITTING (1/16" GAP) DECORATIVE LOOK ON TRADITIONAL, INSET STYLE DOORS WITHOUT MORTISING:
DESIGNED FOR USE ON 3/4" THICK STOCK, SLOTTED HOLES ALLOW EASY ADJUSTMENT FOR A PERFECT FIT; HORIZONTAL AND VERTICAL ADJUSTMENTS ARE EASY TO MAKE. USE FULL WRAP FOR FACE FRAME CABINETS AND PARTIAL WRAP FOR FRAMELESS OR FACE FRAME CABINETS. EXCEED KCMA AND BHMA STANDARDS FOR STRENGTH, QUALITY OF FINISH AND ENDURANCE. STEEL IN A VARIETY OF FINISHES OR SOLID BRASS (MOUNTING SCREWS INCLUDED).
|
|
|
|
Hardware Hinges - Cabinet
|
DUPLEX HINGES
|
| Two Pair Duplex Hinges-brass
...plus other(s)
|
|
|
|
Hardware Hinges - Concealed
|
SOSS® INVISIBLE HINGES - BEAUTIFUL WHEN OPEN, INVISIBLE WHEN CLOSED
|
| 1/2"x1-3/4" Soss Hinge-satin Brass
...plus other(s)
|
SAFETY AND SECURITY AS WELL AS A CLEAN, CONTEMPORARY LOOK ARE EASY WITH SOSS® INVISIBLE HINGES:
WHEN CLOSED, HINGES CANNOT BE SEEN OR TAMPERED WITH - WHEN OPEN, RIVETED PINS CANNOT BE REMOVED (HINGE OPENS TO 180°). HIGH-STRENGTH PLATED STEEL AND HEAVY-DUTY ZINC ALLOY CASTINGS. CHOOSE FROM SB-SATIN BRASS, SC-SATIN CHROME, EE-EBONY EPOXY FINISHES IN A NUMBER OF SIZES. TO INSTALL, MORTISE OUT WOOD DOOR AND JAMB USING A DRILL BIT AND CLEAN UP WITH A CHISEL (PAPER TEMPLATE, INSTRUCTIONS AND MOUNTING SCREWS INCLUDED). SMALLER HINGES SOLD IN CARDED PAIRS; 2-3/4 AND LARGER HINGES SOLD EACH. IMPORTED.
FOR FASTER AND MORE ACCURATE HINGE INSTALLATION, THE OPTIONAL SOSS® ROUTER GUIDE TEMPLATE ENSURES A PERFECT MORTISE:
INDIVIDUALLY HANDCRAFTED TEMPLATE FASTENS TO DOOR AND JAMB WITH NAILS - GUIDE PINS LOCATE THE DEEP MORTISE. ROUTER, ROUTER BIT AND 3/4" O.D. GUIDE BUSHING WITH LOCK NUT REQUIRED (NOT INCLUDED). 101 SERIES TEMPLATE - USE WITH 1/4" DIA BIT. 103 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 203 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 204 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 208 SERIES TEMPLATE - USE WITH 3/8" DIA BIT. 216 SERIES TEMPLATE - USE WITH 1/2" DIA BIT.
|
|
|
|
Hardware Hinges - Concealed
|
HIGH QUALITY, SOLID BRASS CYLINDER HINGES INSTALL EASILY
|
| 10mm Cylinder Hinge
...plus other(s)
|
TO INSTALL SOLID BRASS CYLINDER HINGES, SIMPLY DRILL TWO HOLES:
DESIGNED FOR FLUSH INSET APPLICATIONS, THESE HINGES ARE COMPLETELY CONCEALED WITH DOOR/LID CLOSED AND BARELY SHOW WHEN DOOR/LID IS OPEN. OPENING ANGLE IS 180°. FIVE SIZES OF CYLINDERS ACCOMMODATE MATERIAL FROM 1/2" TO 1-1/8" THICK. ONCE CORRECTLY LOCATED, THE CYLINDER CAN BE LOCKED INTO PLACE WITH A SET SCREW. IMPORTED. TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
BRADPOINT BITS 896-545.
|
|
|
|
Hardware Hinges - Concealed
|
SEMI CONCEALED FLAP AND LID HINGES
|
| Concealed Flap Hinge-brass Plate
...plus other(s)
|
SEMI-CONCEALED FLAP AND LID HINGES FEATURE SIX WAY ADJUSTABILITY FOR A PERFECTLY ALIGNED FIT:
HINGES DETACH FOR SEPARATE MOUNTING ON FLAP AND SHELF. FLAP OPENS FLUSH WITH SHELF. BORING SETUP IS IDENTICAL FOR FLAP AND SHELF. NICKEL OR BRASS PLATED DIE CAST STEEL (SCREWS INCLUDED). SOLD IN PACKAGES OF TWO.
|
|
|
|
Hardware Hinges - Continuous
|
CONTINUOUS HINGES FOR ALL APPLICATIONS
|
| Full Wrap Cont.hinge-pb
...plus other(s)
|
FACE MOUNTING MAKES FULL WRAP AND PARTIAL WRAP PIANO HINGES IDEAL FOR PLYWOOD PROJECTS:
WRAPPED PORTION IS 3/4" WIDE X 13/16" DEEP. BORED 2" ON CENTER WITH SLOTS FOR FINAL FITTING. 48" LONG BRASS PLATED STEEL. STANDARD PIANO HINGES ARE AVAILABLE IN BRASS OR NICKEL PLATED STEEL BORED 2" ON CENTER. 1-1/16" TO 2" OPEN WIDTHS IN 72" LENGTHS. ALL USE #5 SCREWS (NOT INCLUDED).
|
|
|
|
Hardware Hinges - Continuous
|
CONTINUOUS HINGES INCLUDE MOUNTING SCREWS
|
| 1.06"wx36"l Pb Hinge W/screws
...plus other(s)
|
CONTINUOUS HINGES HAVE 0.040" THICK LEAVES WITH 0.090" STEEL PINS ON PLATED HINGES AND PIERCED, COINED HOLES - SPACED 2" ON CENTER WITH OBROUND (OVAL) SLOTS AT EACH END FOR EASE OF ADJUSTMENT:
STEEL HINGES WITH POLISHED BRASS (PB) FINISH. 1.06" OR 1.50" OPEN WIDTHS; 36", 48" OR 60" LENGTHS. #5 X 5/8" #17 AUGER POINT SCREWS INCLUDED. IMPORTED.
|
|
|
|
Hardware Hinges - Specialty
|
BRASS KNIFE HINGES IN TWO POPULAR STYLES FROM BRUSSO®
|
| 5/16" Straight Knife Hinge
...plus other(s)
|
MILLED FROM SOLID BRASS, BRUSSO® STRAIGHT KNIFE AND L-HINGE OFFSET CABINET HINGES FEATURE HAND FITTED PINS TO ENSURE SMOOTH OPERATION:
STRAIGHT KNIFE HINGES ARE USED WHEN A MINIMUM OF VISIBLE HARDWARE IS REQUIRED OR WHEN BUTT HINGES ARE INAPPROPRIATE. THEY ARE MORTISED INTO THE TOP AND BOTTOM OF THE DOOR AND INTO THE FRAME. L-HINGE USE AND INSTALLATION ARE SIMILAR, HOWEVER, THE PIVOT PROJECTS FROM THE CABINET. 2" X 5" HINGE WILL ACCOMMODATE STANDARD INTERIOR DOORS. SOLD IN PAIRS WITH APPROPRIATE MOUNTING SCREWS INCLUDED. USA.
|
|
|
|
Hardware Hinges - Specialty
|
270° PIVOT HINGES FOR CABINETS AND FURNITURE
|
| 270 Degree Hinge-brass
...plus other(s)
|
270° PIVOT HINGES ALLOW TOTAL ACCESS TO TELEVISIONS, DVDS, VCRS AND PULLOUTS:
WRAP-AROUND DESIGN SURFACE MOUNTS TO CABINET WALL AND 35MM DOOR HOLE. CUP AND ARM SEPARATE WITHOUT TOOLS. ±1/8" VERTICAL ADJUSTMENT IS ACCOMPLISHED WITHOUT LOOSENING MOUNTING SCREWS. AVAILABLE IN FOUR FINISHES. USES #6 SCREWS (NOT INCLUDED). NOTE: HINGE KNUCKLE IS EXPOSED OUTSIDE CABINET.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SURFACE MOUNT HINGE SCREWS - 946-161."
|
|
|
|
Hardware Hinges - Specialty
|
BRASS BOX HINGES WITH STAYS
|
| 6mm Sb Box Hinge W/stay
...plus other(s)
|
|
SOLID BRASS BOX HINGES WITH STAYS OPEN TO 110°. STAYS ARE ROUND WIRE. POLISHED, LACQUERED FINISH. MOUNTING SCREWS INCLUDED.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® SOLID BRASS CABINET HINGES LIFT OFF FOR CONVENIENCE
|
| 2-1/2"x3/4" Left Lift Off Hinge
...plus other(s)
|
BRUSSO® LIFT OFF CABINET HINGES ARE 2-1/2" X 3/4" DURABLE SOLID BRASS, TWO KNUCKLE BUTT HINGES:
DESIGNED FOR 3/4" TO 1" THICK DOORS AND SOLD IN PAIRS OF LEFT HAND OR RIGHT HAND (PHILLIPS HEAD MOUNTING SCREWS INCLUDED). USA.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® OFFSET HINGES HANDLE LARGE LOADS
|
| 2" 'l' Knife Hinge
|
MILLED FROM SOLID BRASS, BRUSSO® L-19 OFFSET HINGES ARE USED WHEN A MINIMUM OF VISIBLE HARDWARE IS REQUIRED OR WHEN BUTT HINGES ARE INAPPROPRIATE:
MORTISE INTO THE TOP AND BOTTOM OF THE DOOR AND THE FRAME - ONLY THE PIVOT PROJECTS. LEAVES MEASURE 5" X 2" X 3/8" THICK. HINGES SOLD IN PAIRS (BRASS MOUNTING SCREWS INCLUDED); PACKAGE WEIGHS 2-1/2 LBS. USA.
|
|
|
|
Hardware Hinges - Specialty
|
CHEST HINGE AND LID SUPPORT
|
| Cedar Chest Hng-brt Bras For 3/4" Mat.
...plus other(s)
|
DURABLE CHEST HINGES ARE SIZED TO HANDLE LARGE LIDS AND ARE AVAILABLE IN BRIGHT OR ANTIQUE BRASS FINISHES:
HINGE SURFACES MOUNT ONTO UNDERSIDE OF LID AND INSIDE OF CHEST. MECHANISM ALLOWS A SLAB STYLE TOP TO CLEAR REAR EDGE OF CASE AND PIVOT TO VERTICAL. HOLDS OPEN AT 90° (SCREWS INCLUDED). SOLD IN PAIRS.
|
|
|
|
Hardware Hinges - Specialty
|
SOLID BRASS DOUBLE KNUCKLE HINGES LET FLAPS FOLD FLAT
|
| Sb Dbl Knuckle Hng 2-13/16"x1/2"
...plus other(s)
|
DOUBLE KNUCKLE FLAP HINGE DESIGN ALLOWS FLAPS TO FOLD FLAT WHEN CLOSED:
OPEN TO 180° FOR A LEVEL WORK SURFACE. 936-030 SOLD IN PAIRS WITH SCREWS INCLUDED. 210-004 SOLD EACH AND REQUIRES #4 SCREWS (NOT INCLUDED).
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
#4X5/8" BRASS PLATED STEEL SCREWS - 853-259.
|
|
|
|
Hardware Hinges - Specialty
|
BRUSSO® QUADRANT HINGES INCLUDE POSITIVE STOPS
|
| 1" Quadrant Hinge
...plus other(s)
|
BRUSSO® QUADRANT HINGES WITH SUPPORTS ARE PRECISION MILLED FROM SOLID BRASS AND HAVE A HIGH SATIN FINISH:
HD-638 - (1" BARREL WITH 1" X 1" LEAF) COMES WITH A BUILT-IN STOP, ALLOWING LID TO REMAIN OPEN AT 95° - ARC IS MORTISED INTO SIDE OF BOX BENEATH LEAF. HD-680 - (1-1/2" BARREL WITH 1-1/2" X 1-3/4" LEAF); OPERATION SIMILAR TO HD-638. SOLD IN PAIRS (MOUNTING SCREWS INCLUDED). USA.
|
|
|
|
Hardware Hinges - Specialty
|
PARLIAMENT HINGES 6"
|
| Trad Parlimnt Hinge 6" Ant Br
|
DESIGNED FOR INSET DOORS, THESE ELEGANT TRADITIONAL PARLIAMENT HINGES FEATURE CENTERED INLINE WINGS THAT REQUIRE MORTISING ONLY ON THE DOOR:
SLOTTED HOLE IN EACH WING ALLOWS FOR 1/8" HORIZONTAL ADJUSTMENT. THE ALMOST 6" TALL STEEL HINGES HAVE A DARK, ANTIQUE BRASS FINISH (MOUNTING SCREWS INCLUDED). SOLD IN PAIRS."
|
|
|
|
Hardware Hinges - Specialty
|
DOUBLE ACTING HINGES
|
| Dbl Action Hinge 1-3/4" X 3/4"
...plus other(s)
|
DOUBLE ACTING HINGES ARE THE BEST CHOICE FOR BUILDING FOLDING SCREENS OR DOUBLE PANEL SHUTTERS. BRASS-PLATED STEEL DOUBLE ACTION HINGES OPEN IN BOTH DIRECTIONS:
COUNTERSUNK HOLES ACCEPT #6 SCREWS (INCLUDED). TWO SIZES ALLOW USE IN STOCK UP TO 1-1/8 THICK.IMPORTED
|
|
|
|
Hardware Hinges - Specialty
|
180° OPENING WRAPAROUND HINGES
|
| Inln Hng For Fld Doors Ant Br
|
SIMPLE, WRAP AROUND HINGES PROVIDE FULL 180° ACTION TO ALLOW FLUSH FIT DOORS TO FOLD OUT OF THE WAY. SURFACE MOUNT TO BACK OF CABINET FRAME AND DOOR:
ANTIQUED BRASS, 1-11/16" TALL STEEL HINGES WORK WITH 5/8" TO 7/8" THICK DOORS (MOUNTING SCREWS INCLUDED). SOLD IN PAIRS."
|
|
|
|
Advanced Search Tools
Browse
symbol next to the category that matches your desired product and select a sub-category link.
