Results Sorted by Product Category
(Click on  to see Sub Categories)
|
|---|
Bits Drill And Boring (18)
Bradpoint (18)
|
|
|
Bits Drill And Boring - Bradpoint
|
MAKITA DEPENDABILITY NOW POWERED BY NI-MH BATTERIES
|
| 19/64" Hss Bradpoint Bit
...plus other(s)
|
|
|
|
Bits Drill And Boring - Bradpoint
|
SUPERIOR PRECISION BRADPOINT DRILL BITS - IN METRIC SIZES, TOO
|
| 1/8" Hss Bradpoint Bit
...plus other(s)
|
PRECISION GROUND, HIGH SPEED STEEL BRADPOINT DRILL BITS ARE POLISHED TO A BRIGHT FINISH TO RESIST CLOGGING AND HELP EJECT CHIPS FASTER:
SUPER SHARP OUTLINING SPURS ARE GROUND AT 60° TO GIVE YOU CLEAN, ACCURATE ENTRANCE HOLES WITH MINIMAL BLOW OUT AROUND EXIT HOLES. SMALL RELIEF GRIND ON THE POINT KEEPS THE BIT DRILLING STRAIGHT - EVEN IN TWISTED AND CURLY GRAIN. AVAILABLE IN DIAMETERS 1/64" OVER OR UNDER DOWEL SIZES FOR A PRECISE FIT. 25 PIECE DRILL BIT SET INCLUDES EACH OF THE INDIVIDUAL ENGLISH BITS LISTED BELOW AND IS HOUSED IN AN INDEXED, METAL CASE. 7 PIECE DRILL BIT SET FEATURES A SELECTION OF THE MOST COMMONLY USED INDIVIDUAL ENGLISH BITS. STOP COLLARS ARE RECOMMENDED FOR DRILLING TO EXACT DEPTH. IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
6 PIECE SLIPSTOP™ ENGLISH COLLAR SET - 908-298. 7 PIECE SLIPSTOP™ METRIC COLLAR SET - 908-410.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
BORE CABINET PARTS AND INSERT ALL TYPES OF BLUM® HARDWARE
|
| 10mm Rh Boring Bit For Minipress
...plus other(s)
|
THE BLUM® MINIPRESS P IS AN EASY TO USE MACHINE, DESIGNED FOR BORING ALL HINGE AND MOUNTING PLATE SYSTEMS, METABOX™ FRONT FIXING BRACKETS AND 32MM LINE BORING FOR CABINET SIDES USING AN OPTIONAL SEVEN SPINDLE LINE BORING HEAD:
220V, 1PH MOTOR - 220V, 3PH AVAILABLE AS A SPECIAL ORDER. SPINDLE CONFIGURATION IS ADJUSTED BY A 90° ROTATION OF THE HEAD. ONE SETTING IS DEDICATED TO THE BLUM® HINGE BORING PATTERN. PRESET DEPTH POSITIONS AND ADJUSTABLE FENCE STOPS MAKE SETUPS SIMPLE. THE MACHINE FEATURES A FIVE SPINDLE SWIVELING HEAD, PNEUMATIC MOISTURE TRAP, ADJUSTABLE STROKE AND BORING DEPTH, PNEUMATIC HOLD DOWN CLAMPS, SWING ARM FOR INSERTION RAM, DUST EVACUATION JET AND DUST COLLECTION ADAPTER. WORK TABLE, CENTER RULER, FOUR RULER STOPS, TWO FIXED BORING DEPTH STOPS, REPLACEMENT BREAKAWAY CLUTCH AND TOOL KIT INCLUDED. OPTIONAL INSERTION RAMS ARE AVAILABLE FOR MOST COMPONENTS. MANUFACTURER'S LIFETIME WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
EASILY ALIGN BLUM® DRAWER FRONTS USING THESE ADJUSTERS
|
| 20mm Rh Boring Bit For Minipress
...plus other(s)
|
BLUM® 295.1000 DRAWER FRONT ADJUSTERS ADJUST HEIGHT AND SIDE-TO-SIDE BY 5MM (3/16") - SOLD IN BAGS OF 10 PAIR OR BOXES OF 1,000:
NYLON HOUSING WITH PRE-MOUNTED #8-32 STEEL NUT. USE ON FOUR SIDED WOODEN DRAWERS. FIT 20MM BORE, 10.5MM DEEP. USE #8-32 MACHINE SCREWS TO MOUNT FRONT TO DRAWER (OPTIONAL #8-32 X 1-3/4" BREAKAWAY SCREWS 807-128 - SCORED IN 1/4" INCREMENTS - PROVIDE A 3/4" TO 1-3/4" WORKING LENGTH). 65.2950.10 - OPTIONAL MARKING GAUGE SIMPLIFIES LOCATING SCREW HOLES IN THE DRAWER BOX - STANDARD BORING FOR DRAWER FRONT ADJUSTERS ALLOWS MARKING GAUGE TO FUNCTION LIKE A DOWEL CENTER TO MARK BORING LOCATIONS. 135-671, 913-686 - DRILL BITS SOLD SEPARATELY. LIFETIME MANUFACTURER'S WARRANTY. AUSTRIA.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
EL GRANDE BALL POINT PEN HARDWARE FOR WOODTURNERS
|
| 31/64" Hss Bradpoint Bit
...plus other(s)
|
THE EL GRANDE BALL POINT PEN HARDWARE KIT IS ACCENTED BY BRILLIANT PLATINUM OR GOLD FOR AN OVERALL BEAUTIFUL AND UNIQUE EFFECT:
DESIGN REQUIRES STEP DRILLING. PEN BLANK, "16B" BUSHING SET, "B" MANDREL, 33/64" AND 31/64" DRILL BITS REQUIRED (ALL SOLD SEPARATELY). IMPORTED.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ACRYLIC ACETATE PEN BLANKS - 141-212. NATURAL WOOD PEN BLANKS - 141-182. RESIN IMPREGNATED BURL PEN BLANKS - 141-386.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
CIGAR BALL POINT PEN HARDWARE FOR WOODTURNERS
|
| 10mm Hss Bradpoint Bit
...plus other(s)
|
|
|
|
Bits Drill And Boring - Bradpoint
|
BUTTON CLICK BALLPOINT PEN HARDWARE FOR WOODTURNERS
|
| 11/32" Hss Bradpoint Bit
...plus other(s)
|
|
|
|
Bits Drill And Boring - Bradpoint
|
EUROPEAN CARBIDE-TIPPED BRADPOINT BITS AT A GREAT PRICE
|
| 1/4" X 4" Carbide Tip Brad Point Bit
...plus other(s)
|
|
|
|
Bits Drill And Boring - Bradpoint
|
LIMITED QUANTITIES OF PRECISION BRADPOINT DRILL BITS
|
| 18mm 3/8sh Hss Bradpoint Bit
...plus other(s)
|
PRECISION GROUND, HIGH SPEED STEEL BRADPOINT BITS ARE POLISHED TO A BRIGHT FINISH TO RESIST CLOGGING AND TO HELP EJECT CHIPS FASTER:
SUPER SHARP OUTLINING SPURS ARE GROUND AT 60° TO GIVE CLEAN, ACCURATE ENTRANCE HOLES WITH MINIMAL BLOW OUT AROUND THE EXIT HOLE. A SMALL RELIEF GRIND ON THE POINT KEEPS THE BIT DRILLING STRAIGHT, EVEN IN TWISTED AND CURLY GRAIN. ALL BITS HAVE STRAIGHT, 3/8" DIA. SHANKS. USA.
LIMITED TO QUANTITIES ON HAND
908-298, 908-410 - SLIPSTOP™ COLLARS RECOMMENDED FOR DRILLING TO EXACT DEPTHS.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
HEX SHANK BRADPOINT DRILL BITS
|
| 1/8"hex Shank Bradpoint Bit
...plus other(s)
|
HIGH SPEED STEEL HEX SHANK BRADPOINT DRILL BITS LET YOU QUICKLY CHANGE FROM ONE BIT TO ANOTHER TO SAVE VALUABLE TIME:
AVAILABLE IN ALL OF THE MOST CONVENIENT SIZES.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
ECONOMICAL, ACCURATE SEVEN PIECE BRADPOINT DRILL BIT SET
|
| 7pc Brad Pt Bit Set- Plastic Case
...plus other(s)
|
SURPRISINGLY HIGH QUALITY FOR THE PRICE - THE OUTSIDE SPURS OF THIS SEVEN PIECE BRADPOINT DRILL BIT SET CUT CHIP-FREE HOLES AND KEEP THE BIT ON TRACK IN TWISTED GRAIN:
INCLUDES 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" AND 1/2" BITS, 2-3/4" TO 6" LONG - STOP COLLARS RECOMMENDED. ALL HAVE 3/8" SHANKS - LARGER BITS TURNED DOWN TO 3/8". IMPORTED.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
1/2" X 10" BRADPOINT DRILL BITS AT REDUCED PRICES
|
| 1/2"x10" Brad Pt Drill Bit
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
LONG BITS TAKE A LOT OF ABUSE BECAUSE OF HEAT BUILDUP IN DEEP HOLES. OUR 1/2" X 10" CHROME-VANADIUM BRADPOINTS OFFER SOLID PERFORMANCE AT A REDUCED PRICE:
3/8" SHANK - HIGHLY POLISHED TO REDUCE FRICTION. PRECISION GROUND POINTS AND OUTLINING SPURS KEEP TIP FROM DRIFTING OFF CENTER.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Bits Drill And Boring - Bradpoint
|
CARBIDE TIPPED BRADPOINT DRILL BITS - AN INCREDIBLE VALUE!
|
| 13pc Carbide Bradpoint Set
...plus other(s)
|
CARBIDE LASTS UP TO 50 TIMES LONGER THAN STEEL, WHICH MEANS YOU'LL BE ABLE TO USE THESE BRADPOINT DRILL BITS FOR A LONG TIME:
SHARP POINTS AND OUTLINING SPURS CUT EXTREMELY CLEAN HOLES. DOUBLE FLUTE DESIGN REMOVES CHIPS, QUICKLY, SO THE BIT WORKS WITH LESS EFFORT. BITS OVER 3/8" DIA. HAVE TURNED DOWN SHANKS TO FIT 3/8" DRILLS. 13 PIECE SET INCLUDES 1/8" TO 1/2" BITS IN 1/32" INCREMENTS. IMPORTED.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
FREUD® INDUSTRIAL CARBIDE TIPPED BORING BITS
|
| 8mm X 57mm Lh Bradpnt Boring Bit
...plus other(s)
|
FREUD® INDUSTRIAL CARBIDE TIPPED BORING BITS CAN BE USED ON ALL COMPOSITION MATERIALS, SOLID SURFACE MATERIALS, PLYWOOD, HARDWOOD AND SOFT WOOD USING AUTOMATIC AND MANUAL MULTI-SPINDLE BORING MACHINES:
10MM X 20MM SHANKS. 60° POINT ON THROUGH HOLE BITS HELPS ENSURE PINPOINT ACCURACY. ITALY.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
RITTER MANUFACTURING PNEUMATIC AND MANUAL LINE DRILLS INCLUDE DURABLE METAL STANDS
|
| 5mm X 57mm Lh Bradpnt Boring Bit
...plus other(s)
|
|
|
|
Bits Drill And Boring - Bradpoint
|
HIGH SPEED STEEL HEX SHANK BRADPOINT DRILL BITS
|
| 5/32"hex Shank Bradpoint Bit
...plus other(s)
|
AVAILABLE AS A COST SAVING SET OR INDIVIDUALLY, HSS HEX SHANK BRADPOINT DRILL BITS ARE MANUFACTURED IN THE USA:
959-866 - SET INCLUDES 1/16", 3/32", 1/8", 5/32", 3/16" AND 1/4" BITS.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
EXTRA LONG BRADPOINT DRILL BITS TACKLE DEEPER HOLES
|
| 1/8" X 10" Hss Bradpoint Bit
...plus other(s)
|
LONG BITS TAKE LOTS OF ABUSE BECAUSE OF HEAT BUILDUP IN DEEP HOLES. HOWEVER, THESE EXTRA LONG HIGH SPEED STEEL BRADPOINT BITS HAVE BETTER RESISTANCE TO HEAT FOR MUCH LONGER WORKING LIVES:
SELECT BETWEEN 10" OR 12" LONG BITS; PRECISION GROUND POINTS AND OUTLINING SPURS KEEP THE TIPS FROM DRIFTING OFF OF CENTER. SEVEN PIECE SETS INCLUDE 1/8", 3/16", 1/4", 5/16", 3/8", 7/16" AND 1/2" DIA., STRAIGHT SHANK BITS (7/16" AND 1/2" BITS WILL NOT RUN IN A 3/8" CHUCK) . IMPORTED.
|
|
|
|
Bits Drill And Boring - Bradpoint
|
FACE MAKER - UNIQUE CLAMP/DRILL GUIDE FOR ASSEMBLING FRAMES
|
| Brad Pt Drill Bit F/fm50
...plus other(s)
|
USING THE PATENTED FACE MAKER, YOU WILL BE ABLE TO ASSEMBLE FACE FRAMES, CABINET DOORS AND PICTURE FRAMES MUCH MORE QUICKLY AND ACCURATELY THAN EVER BEFORE:
SIMPLY CLAMP THE SELF-CENTERING JAWS ONTO ONE SECTION OF FRAME, SLIDE THE SECOND SECTION UNDER THE T-BAR, TIGHTEN, BORE TWO HOLES, DRIVE TWO SCREWS AND THE JOINT IS DONE. IT'S THAT SIMPLE! COMES WITH BRADPOINT DRILL BIT, DRILL STOP COLLAR, SQUARE-HEAD DRIVER, SELF-TAPPING SCREWS AND INSTRUCTIONS. DURABLE METAL CONSTRUCTION FOR YEARS OF SERVICE. 8-1/4"H X 12"W X 15"L (UNEXTENDED). 10 LBS. NET WEIGHT; 13 LBS. SHIPPING WEIGHT. OPTIONAL QUICK-ATTACH KIT ALLOWS FASTER DRILL/DRIVER CHANGEOVERS TO SPEED ASSEMBLY TIME (QUICK-CHANGE DRILL BIT, SQUARE-HEAD DRIVER AND CHUCK INCLUDED). OPTIONAL CARBIDE CUTTER WITH PILOT DRILL IS RECOMMENDED FOR DRILLING INTO HARDWOOD. USA.
|
|
|
|
Advanced Search Tools
Browse our
(Reconditioned)
