|
|
|
Air Tool Accessories - Fittings
|
AIR HOSES, REELS AND BLOW GUNS DESIGNED FOR RUGGED JOB SITE CONDITIONS
|
| Ag2-10 Extendable Blow Gun
...plus other(s)
|
LEGACY™ CONTRACTOR™ SERIES AIR REELS ARE LOADED WITH DESIGN FEATURES - BAKED ENAMEL FINISH, REINFORCED STEEL WITH TAPERED SIDE WALLS, 3' LEAD-IN HOSES AND BRAKES TO KEEP HOSE FROM UNWINDING AND SWIVEL HANDLES AND BRACKETS FOR WALL, WORKBENCH OR VEHICLE USE:
L8650 100' CAPACITY REEL INCLUDES 50' WORKFORCE™ SERIES AIR HOSE: 15-3/8" X 10-5/8" X 13-1/8" REEL - HOSE AND REEL WEIGH 18.63 LBS. L8652 200' CAPACITY REEL COMES WITH 100' WORKFORCE™ SERIES HOSE: 19-7/16" X 10-5/8" X 12" REEL - HOSE AND REEL WEIGH 22.88 LBS. HOSES ARE 3/8" I.D. REINFORCED PVC WITH SOLID 1/4" BRASS NPT FITTINGS AND BEND RESTRICTORS TO PROLONG HOSE LIFE - 350 PSI MAXIMUM WORKING PRESSURE.
AG2-10 BLOW GUN EXTENDS FROM 6-1/2" TO 11", SWIVELS 360° AND HAS A REMOVABLE RUBBER SCRATCH GUARD TIP - 1/4" NPT BRASS AIR INLET THREAD: 13 CFM @ 90 PSI WITH 1/4" HOSE; 15 CFM WITH 3/8" HOSE - 110 MAXIMUM PSI. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
INTACAP® KEEPS GRIME AND DIRT OUT OF PNEUMATIC TOOLS
|
| Air Tool End Caps
|
INTACAP® PNEUMATIC TOOL CAPS HELP PREVENT THE WEAR AND TEAR OF DUST AND CONTAMINANTS INSIDE OF AIR-POWERED TOOLS:
PLIABLE, FORM FITTING CAP ON ONE END FITS OVER AND SEALS THE 1/4" AIR TOOL INTAKE CONNECTOR - RING ON OPPOSITE END ATTACHES TO TOOL TO PREVENT LOSS. BRIGHT YELLOW FOR VISIBILITY; SOLD IN PACKAGES OF 5. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
HIGH-VOLUME BLOW GUN MAKES HEAVY-DUTY CLEAN-UPS EASIER
|
| Typhoon Blow Gun
...plus other(s)
|
DELIVERING UP TO 51 CFM AND OVER 3 LBS. OF THRUST AT 125 PSI, COILHOUSE PNEUMATICS® TYPHOON HIGH-VOLUME BLOW GUN IS IDEAL FOR HEAVY-DUTY CLEAN-UP AND BLOW-OFF OF EVEN THE HEAVIEST CHIPS AND SHAVINGS - MEETS OR EXCEEDS OSHA REGULATIONS:
130-160 - MODEL TYP-3800CS 3/8" NPT BLOW GUN IS LIGHTWEIGHT AND ERGONOMIC: 10-1/2"L X 5-3/4"W X 2-1/8" H, WEIGHS 6.2 OZ. COMES WITH MJN-0-DL MULTI-JET AND HFN-00F-DL HIGH FLOW TIPS (FEMALE).
120-941 - MODEL 1506BS - OPTIONAL 3/8" INDUSTRIAL BALL SWIVEL CONNECTOR ADDS FLEXIBLE TOOL-TO-HOSE CONNECTIVITY: 1/4" DIA. HOSE CONNECTOR AND NUT ARE NICKEL-PLATED, HARDENED STEEL - 3/8" DIA. MALE THREAD IS ALL BRASS.
ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
|
|
|
|
Air Tool Accessories - Fittings
|
A COMPACT INLINE BLOWGUN WILL END HUNTING FOR YOUR STANDARD BLOWGUN
|
| Inline Blow Gun W/ Osha Tip
...plus other(s)
|
SIMPLY SCREW A COILHOSE PNEUMATICS® 600 SERIES IN-LINE BLOWGUN ONTO THE END OF YOUR AIR HOSE, INSTALL A QUICK CONNECT COUPLING ON THE BLOWGUN'S OPPOSITE END AND YOU WILL ALWAYS KNOW WHERE THIS HANDY TOOL IS LOCATED:
UNIQUE "FULL FLOW" DESIGN WILL NOT RESTRICT DOWNSTREAM AIR FLOW. 150 PSI RATING; 32° TO +175°F. OPERATING RANGE. 1/4" NPT FEMALE THREADS; 1/8" DIA. NOZZLE PORT. REPLACEABLE METAL OSHA TIP MEETS APPROVED SAFETY STANDARDS; REPLACEABLE RUBBER TIP FEATURES A CONICAL SHAPE. 1-5/8"H X 3/4"W X 1-7/8"L CHROME PLATED ZINC BODY; WEIGHS 0.2 LBS. 834-793 - QUICK CONNECT COUPLING SOLD SEPARATELY (AIR HOSE NOT INCLUDED).
|
|
|
|
Air Tool Accessories - Fittings
|
COILHOSE PNEUMATICS® IN-LINE FILTER ATTACHES DIRECTLY TO YOUR AIR TOOL
|
| 1/4" Npt In-line Air Filter Plug
...plus other(s)
|
FOR USE WITH ANY AIR TOOL OPERATING IN A DIRTY OR DUSTY ENVIRONMENT, THE PATENT-PENDING COILHOSE PNEUMATICS® INDUSTRIAL INTERCHANGE FILTERPLUG™ INCORPORATES A SINTERED BRONZE FILTER INSIDE OF THE PNEUMATIC CONNECTOR PLUG:
TOOL BACK PRESSURE AUTOMATICALLY CLEANS THE FILTER, WHICH CAN BE CLEANED EASILY OR REPLACED. FILTER BODY IS HARDENED, NICKEL-PLATED BRASS - THREADS ARE NICKEL-PLATED BRASS. 1501LF (146-942): 1/4" MPT IN-LINE FILTER PLUG. 1503LF (146-945): 3/8" MPT IN-LINE FILTER PLUG. 150 PSI MAXIMUM PRESSURE. 200°F MAXIMUM OPERATING TEMPERATURE. 2-7/16" LONG W/3/4" HEX; WEIGHS 0.115 LBS. OPTIONAL ILF-KIT (146-948) CAN BE USED TO REPLACE FILTER IN EITHER 1/4" OR 3/8" PLUG. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
WITH COILHOSE PNEUMATICS® AUTOMATIC COUPLERS SWITCHING BETWEEN AIR TOOLS IS A SNAP
|
| 1/4" Npt-f Automatic Coupler
...plus other(s)
|
DESIGNED FOR STATIONARY MOUNTING, COILHOSE PNEUMATICS® COILFLOW™ TYPE 15 AUTOMATIC COUPLERS OFFER AN EASIER WAY TO MAKE AIR HOSE CONNECTIONS - NO MORE RETRACTING A COLLAR AND PUSHING AGAINST A BLAST OF AIR:
15C90B4F (146-951) AND 15C90B4M (146-954): 1/4" NPT THREADED FEMALE AND MALE. 15C90B6F (146-957) AND 15C90B6M (146-960): 3/8" NPT THREADED FEMALE AND MALE. 1/4" BODY SIZE, ALL-BRASS CONSTRUCTION AND INTERCHANGEABLE WITH ANY INDUSTRIAL INTERCHANGE CONNECTOR THAT CONFORMS TO MIL-C4109 SPECIFICATIONS. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
COMPACT INLINE BLOWGUN MEETS OSHA REQUIREMENTS
|
| Rj001 Inline Blowgun
|
THE READY JET RJ001 SAFETY INLINE BLOWGUN MEETS OSHA REQUIREMENTS BY HAVING A SPECIAL RELIEF HOLE IN THE NOZZLE THAT LIMITS PRESSURE TO 30 PSI WHEN DEAD ENDED ON AN AIR LINE OF 150 PSI OR LESS:
PRECISION MACHINED FROM AIRCRAFT QUALITY ALUMINUM WITH A BRASS BUTTON AND NEOPRENE O-RING. SEALED UNIT WORKS AT A NATURAL ANGLE TO YOUR AIR HOSE. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
USE YOUR AIR COMPRESSOR TO BLOW AWAY UNWANTED SAWDUST
|
| Adjust Air Valve And Mag Base
|
HEAVY MAGNETIC BASE STICKS TO MOST MACHINES AND THE MOVABLE SNAP-LOCK AIR HOSE BENDS TO REACH ANYWHERE:
WIDE NOZZLE PROVIDES A LARGE FAN OF AIR; BUILT-IN AIR FLOW ADJUSTER. ACCEPTS 3/8" AIR HOSE; WORKS BEST AT 30 TO 35 PSI. IMPORTED.
|
|
|
|
Air Tool Accessories - Fittings
|
AIR TOOL STANDARD QUICK COUPLERS HELP SPEED THE JOB
|
| 1/4" Female Thread Plug
...plus other(s)
|
PLATED STEEL WITH HARDENED STEEL BALLS AND STAINLESS STEEL SPRINGS, COUPLERS ARE HEAT TREATED AND PLATED TO REDUCE WEAR ON CRITICAL MATING SURFACES:
ALL THREADS ARE NPT. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
TAMPER PROOF AIR TOOL SAFETY BLOW GUN
|
| Tamper Proof Safety Blow Gun
|
TIP SWIVELS FREELY, YET CANNOT BE REMOVED:
TIP PRESSURE WILL NOT EXCEED 30 PSI, YET PROVIDES AN EXCELLENT BLAST OF AIR FOR CLEANING. 1/4" NPT. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
YOU CAN GET THE MOST OUT OF YOUR AIR COMPRESSOR WITH THIS 17 PIECE ACCESSORY KIT
|
| 17 Pc Air Tool Accessory Kit
|
COMBINED INTO ONE PACKAGE, THE DEVILBISS EXCELL EAK253 17 PIECE AIR TOOL ACCESSORY KIT CONTAINS ESSENTIAL ITEMS AT A PRICE FAR LESS THAN IF YOU PURCHASED EACH, SEPARATELY:
INCLUDES 1/4" NPT QUICK DISCONNECT MALE AND FEMALE FITTINGS, HEAVY DUTY BLOW GUN, TIRE GAUGE, TIRE INFLATOR, TAPERED INFLATOR NEEDLE, BALL INFLATION NEEDLES, AIR CLEANING WIRE BRUSH, MALE HOSE CONNECTORS AND A SAFETY NOZZLE. IMPORTED.
|
|
|
|
Air Tool Accessories - Fittings
|
HIGH QUALITY AIR LINE SWIVELS FROM DYNABRADE®
|
| 1/4" Composite Swivel
...plus other(s)
|
THE DYNABRADE® DYNASWIVEL IS A PATENTED "UNIVERSAL JOINT" THAT CONNECTS PORTABLE AIR TOOLS TO AN AIR LINE. SWIVELS 360° AT TWO PIVOT POINTS, ALLOWING AIR HOSE TO DROP DIRECTLY ONTO THE FLOOR WHILE PROVIDING SUPERB TOOL HANDLING. IMPROVES TOOL MANEUVERABILITY, MINIMIZES OPERATOR FATIGUE AND EXTENDS HOSE LIFE. BOTH SWIVELS OFFER IMPROVED AIR FLOW AND CAN HANDLE UP TO 150 PSI:
921-810 - 1/4" NPT COMPOSITE DYNASWIVEL:
HANDLES UP TO 33 CFM. LIGHTWEIGHT, NON-MARRING COMPOSITE CONSTRUCTION; INDUSTRIAL QUALITY. WEIGHS 2.15 OZ.
921-817 - 3/8" NPT HEAVY DUTY DYNASWIVEL:
HANDLES UP TO 45 CFM. ALUMINUM AND STAINLESS STEEL CONSTRUCTION. WEIGHS 6.4 OZ.
|
|
|
|
Air Tool Accessories - Fittings
|
DYNABRADE® SPRAYGUN SWIVEL™ REDUCES OPERATOR FATIGUE
|
| 1/4" Spray Gun Swivel
|
THE DYNABRADE® MODEL 95586 SPRAYGUN SWIVEL™ ALLOWS AN AIR HOSE TO HANG STRAIGHT TO THE FLOOR AND OUT OF THE WAY, NO MATTER HOW THE GUN IS TURNED, IMPROVING CONTROL AND ELIMINATING KINKED HOSES:
CONNECTS TO AIR HOSE WITH 1/4" FEMALE NPT FITTING AND TO SPRAY GUN WITH 1/4"-18 FEMALE NPSM FITTING. BUILT-IN FLOW CONTROL KNOB WITH EASY-TO-READ GAUGE. HANDLES UP TO 25 CFM - NOT TO EXCEED 150 PSI. WEIGHS 1/2 LB. NOTE: SPRAY GUN USE ONLY - NOT FOR USE WITH PERCUSSION TOOLS.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Air Tool Accessories - Fittings
|
DYNABRADE® AIR TOOL COUPLERS AND PLUGS PROVIDE 35% MORE AIR FLOW
|
| 1/4"quick Coupler-female End
...plus other(s)
|
AIR TOOLS ARE NEVER STARVED WHEN USING DYNABRADE® AIR TOOL COUPLERS AND PLUGS:
COMPATIBLE WITH MANY OTHER 1/4" AND 3/8" PLUG MODELS. TOOLS ARE NEVER STARVED, RESULTING IN NO MORE "PROUD" NAIL HEADS OR STALLED STANDERS. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
AIR LINE BARB HOSE FITTINGS ARE MADE FROM SOLID BRASS
|
| 1/4" Hose X 1/8" Mpt Adapt
...plus other(s)
|
SOLID BRASS AIR LINE HOSE FITTING BARBS ARE GREAT FOR PERMANENT OR REPAIR APPLICATIONS:
300 PSI RATED MAXIMUM WORKING PRESSURE. ALL THREADS ARE NPT. MUST BE SECURED WITH HOSE CLAMPS (934-014) OR CRIMP-ON FERRULES. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
SOLID BRASS BARB HOSE FITTINGS
|
| 3/8" Hose X 3/8" Fpt Swivel
...plus other(s)
|
SOLID BRASS BARB FITTINGS ARE GREAT FOR AIR HOSE PERMANENT OR REPAIR APPLICATIONS:
300 PSI MAXIMUM WORKING PRESSURE. ALL THREADS ARE NPT. MUST BE SECURED TO THE AIR HOSE WITH HOSE CLAMPS OR CRIMPED-ON FERRULES. USA.
|
|
|
|
Air Tool Accessories - Fittings
|
QUICKFIT LOW PRESSURE FITTINGS SPECIFICALLY DESIGNED FOR AIR CLAMPING APPLICATIONS
|
| Male 1/8 Npt X 1/4 Tube
...plus other(s)
|
QUICKFIT FITTINGS ARE NICKEL PLATED BRASS WITH ENGINEERING GRADE POLYMER AND/OR TEFLON® PRE-COATED THREADED BRASS CONNECTORS:
1/4" OD PLASTIC TUBING SIMPLY PLUGS INTO POLYMER CONNECTORS AND SEALS, INSTANTLY. NITRILE O-RINGS. SEVEN CONFIGURATIONS TO MEET ALMOST ANY REQUIREMENTS.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
96-015 - FOOT OPERATED AIR VALVES. 96-018 - 1/4" NYLON AIR TUBING.
|
|
|
|
Air Tool Accessories - Hoses
|
HEAVY DUTY, SELF WINDING AIR HOSE REEL INCLUDES THE HOSE, MOUNTS JUST ABOUT ANYWHERE
|
| Self Winding Air Hose Reel
|
TAKE ALL THE FUSS OUT OF STORING AND CARING FOR YOUR AIR HOSE WITH THE SELF WINDING, RC 2000 AIR HOSE REEL:
PULL THE HOSE OUT...A SPECIAL LATCHING MECHANISM HOLDS THE HOSE AT THE DESIRED LENGTH UNTIL YOU ARE FINISHED. THEN, WITH A SIMPLE TUG, THE HOSE RETRACTS BACK INTO THE CASE. POLYPROPYLENE COPOLYMER BRACKET LETS YOU MOUNT REEL ON THE GROUND, WALL, OVERHEAD OR ON A VEHICLE; ONCE INSTALLED, THE AIR HOSE FOLLOWS THE USER WITH A 180° SWIVEL ACTION. 14-1/2"H X 20"L X 9"D, INSTALLED. INCLUDES 50'L X 3/8" I.D. PVC AIR HOSE WITH 3' INLET HOSE; 240 PSI MAXIMUM WORKING PRESSURE; 3/8" NPT INLET AND OUTLET. ONE YEAR MANUFACTURER'S WARRANTY. CANADA.
|
|
|
|
Air Tool Accessories - Hoses
|
ELIMINATE KINKS OR CRACKS WITH LIGHTWEIGHT, COILED OR RETRACTABLE VINYL AIR TOOL HOSES
|
| 1/4"x30' Coil Air Hose
...plus other(s)
|
REPLACE TANGLED OR DAMAGED PLASTIC AIR TOOL HOSES WITH LIGHTWEIGHT, COILED OR RETRACTABLE VINYL AIR TOOL HOSES FROM BEAVER TOOLS. EACH HOSE HAS A 250 PSI MAXIMUM WORKING PRESSURE:
BA-1202, BA-1203 - 1/4" X 30' (20 CFM MAXIMUM) OR 3/8" X 30' (35 CFM MAXIMUM) DURABLE, HEAVY DUTY VINYL HOSE IS COILED FOR COMPACT STORAGE. FEATURES BRASS NPT FITTINGS AND A LIGHTWEIGHT DESIGN. BA-1207 - 1/4" X 25' (20 CFM MAXIMUM) FLEXIBLE VINYL HOSE FITS INSIDE THE HOUSING SHOWN AND FEATURES A POSITIVE POSITION, LOCKING RETRACTOR. HIGH-IMPACT PLASTIC CASE; SOLID BRASS FITTINGS; RUBBER NIPPLE COVER AND STOP BALL (MOUNTING HARDWARE INCLUDED). USA.
|
|
|
|
Air Tool Accessories - Hoses
|
RETRACTABLE HOSE REEL INCLUDES AIR HOSE
|
| 50' Self Retracting Air Hose
|
THE LEGACY™ LEVELWIND™ RETRACTABLE HOSE REEL AUTOMATICALLY LAYERS HOSE BACK AND FORTH, ENSURING SMOOTH COILING EVERY TIME:
IDEAL FOR AIR TOOLS AND LOW COST HOSE STORAGE. FEATURES INCLUDE ADJUSTABLE HOSE STOPPER, SEVEN POSITION LOCKING BRACKET AND LATCHING MODE SWITCH TO LATCH HOSE EVERY 3' OR AUTOMATICALLY REWIND. HEAVY DUTY UV STABILIZED POLYPROPYLENE, THE REEL SITS FLAT AND HAS BUILT IN CARRYING HANDLE. INCLUDES 50' OF 3/8" ID REINFORCED PVC COMPRESSED AIR HOSE WITH SOLID 1/4" BRASS MNPT FITTINGS. 350 PSI MAXIMUM WORKING PRESSURE. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
50% LIGHTER THAN RUBBER HOSES, FLEXEEL® PNEUMATIC AIR HOSES REMAIN FLEXIBLE AT COLD TEMPERATURES
|
| Yellow Flexsteel Hose 1/4"x25'
...plus other(s)
|
EXTREMELY LIGHTWEIGHT BUT TOUGH, FLEXEEL® AIR HOSES FEATURE INTERIOR BRAIDED, REINFORCED CONSTRUCTION TO ELIMINATE SEPARATION CAUSED BY PULSATING OPERATIONS:
IDEAL FOR INDOOR INDUSTRIAL OR OUTDOOR CONTRACTOR USE. 200 PSI WORKING PRESSURE AT 70°F. - HIGHLY ABRASION AND LUBRICANT RESISTANT. RETAINS FLEXIBILITY IN SUBZERO (-40° F.) TEMPERATURES. THINNER OVERALL DIAMETER THAN RUBBER AND PLASTIC HOSES, BUT PROVIDE THE SAME VOLUME OF AIR. TRANSPARENT, BRIGHT YELLOW POLYURETHANE WITH BRASS MPT FITTINGS THAT INCLUDE STRAIN RELIEF. USE BRASS SPLICERS TO CONNECT HOSES OR FOR IN THE FIELD REPLACEMENTS OR REPAIRS. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
LIGHTWEIGHT HOSE REEL COMES WITH 100 FEET OF HOSE
|
| 100 Ft. Hose Reel
|
THE LIGHTWEIGHT POWERPORT PRODUCTS HOSE REEL WITH HOSE CAN BE WALL MOUNTED OR HAND CARRIED:
UV-STABILIZED POLYPROPYLENE REEL INCLUDES CRANK HANDLE, TOP CARRYING HANDLE AND 5' LONG FULL-FLOW SWIVEL SUPPLY HOSE. CAN ALSO BE WALL MOUNTED. 100' LONG, 3/8" ID PVC AIR HOSE HAS 1/4" NPT FITTINGS - 300 PSI MAXIMUM WORKING PRESSURE. WEIGHS LESS THAN 25 LBS. LIFETIME MANUFACTURER'S WARRANTY.
|
|
|
|
Air Tool Accessories - Hoses
|
PORTER-CABLE® AIR HOSE
|
| 3/8" X 50' Vinyl Air Hose, 1/4"npt
|
GIVE YOUR AIR COMPRESSOR A BREAK BY USING ADDITIONAL PORTER-CABLE® MODEL 60250 VINYL AIR HOSE INSTEAD OF EXTENSION CORDS - YOU'LL GET THE SAME PRESSURE WHILE YOUR COMPRESSOR WILL LAST LONGER AND HAVE MORE POWER:
3/8" X 50' - 300 PSI. WILL ACCOMMODATE GRINDERS, SANDERS, DRILLS AND OTHER LARGE AIR TOOLS. 1/4" NPT MALE BRASS FITTINGS SECURED WITH FERRULES ON BOTH ENDS. PREMIUM PVC COVER WITH HEAVY-DUTY SPIRAL REINFORCEMENT. ABRASION RESISTANT, NON MARRING. SHIPPING WEIGHT 4.6 LBS. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
CLAMPVAC2800 VACUUM SYSTEM PROVIDES 14 PSI CLAMPING PRESSURE WITH 5 CFM FLOW
|
| 25'x3/8"od Yellow Tubing
...plus other(s)
|
THE CLAMPVAC2800 SYSTEM IS THE PERFECT CHOICE FOR VACUUM CLAMPING LAMINATES AND ODD SHAPES:
HOLD DOWN PACKAGE INCLUDES PUMP, RESERVOIR TANK, LATCHING FOOT VALVE, SEAL TAPE, 3/8" TUBING AND FITTINGS. VENEER PACKAGE INCLUDES PUMP, VINYL BAG AND 3/8" TUBING WITH FITTINGS. 1/4 HP, 120VAC PUMP ASSEMBLY PULLS 5 CFM AT ZERO VACUUM. VACUUM CUTOFF IS ADJUSTABLE FROM 30 TO 1.5 INCHES MERCURY (HG.) WITH AUTOMATIC OVERLOAD PROTECTION. RESERVOIR TANK AVAILABLE SEPARATELY. HEAVY DUTY, 20-MIL VINYL BAGS AVAILABLE IN TWO SIZES. ALL TUBING AND FITTINGS ARE 3/8" OD. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
HEAVY DUTY, COILED AIR TOOL HOSES DESIGNED FOR HIGH PRESSURES
|
| 1/4" X 25' Hd Coil Hose
...plus other(s)
|
THESE HEAVY DUTY, COILED AIR TOOL HOSES CAN HANDLE WORKING PRESSURES UP TO 250 PSI AT 70° F.:
HOSE WALL IS 20% HEAVIER THAN STANDARD HOSE. COILED DESIGN PREVENTS KINKING AND TANGLES. MALE THREADED ENDS. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
STEEL CONSTRUCTION MAKES RAPID-REEL® AIR HOSE REELS TOUGH AND DURABLE
|
| 50' Air Hose Reel 3/8" Hose
...plus other(s)
|
TOUGH, STEEL CONSTRUCTION AND A DURABLE POWDER BAKED FINISH ENSURE THAT RAPID-REEL ® AIR HOSE REELS WILL PROVIDE YEARS OF DEPENDABLE SERVICE:
AN AUTOMATIC BRAKE KEEPS THE HOSE FROM UNWINDING BY ITSELF AND ONLY RELEASES HOSE AS IT'S PULLED - WALK AROUND WITH AN AIR TOOL AND YOU WON'T BE FOLLOWED BY A TANGLED MESS. REELS MOUNT TO WALLS OR BENCHTOPS (AIR HOSE NOT INCLUDED). - 920-135 - HOLDS 50' OF 3/8" DIA. AIR HOSE.
- 920-142 - HOLDS 100' OF 3/8" DIA. HOSE.
- 920-949 - 16-1/2" X 17-1/2" CONTRACTOR CADDY GIVES EITHER REEL A STEADY, BUT MOVEABLE, BASE. RUBBER FEET WON'T HARM FLOORS.
WITH OPTIONAL BRACKETS, RAPID-REEL ® CAN BE MOUNTED DIRECTLY ONTO THE HANDLES OF MANY POPULAR AIR COMPRESSORS: - 920-156 - FITS MOST CRAFTSMAN® AND DEVILBISS COMPRESSORS.
- 920-163 - FITS CAMPBELL-HAUSFELD® AND COLEMAN POWERMATE®.
USA.
|
|
|
|
Air Tool Accessories - Hoses
|
STEEL CONSTRUCTION MAKES RAPID-REEL® AIR HOSE REELS TOUGH AND DURABLE
|
| 100' Air Hose Reel 3/8" Hose
...plus other(s)
|
TOUGH, STEEL CONSTRUCTION AND A DURABLE POWDER BAKED FINISH ENSURE THAT RAPID-REEL ® AIR HOSE REELS WILL PROVIDE YEARS OF DEPENDABLE SERVICE:
AN AUTOMATIC BRAKE KEEPS THE HOSE FROM UNWINDING BY ITSELF AND ONLY RELEASES HOSE AS IT'S PULLED - WALK AROUND WITH AN AIR TOOL AND YOU WON'T BE FOLLOWED BY A TANGLED MESS. REELS MOUNT TO WALLS OR BENCHTOPS (AIR HOSE NOT INCLUDED). - 920-142 - HOLDS 100' OF 3/8" DIA. HOSE.
- 920-949 - 16-1/2" X 17-1/2" CONTRACTOR CADDY PROVIDES A STEADY, BUT MOVEABLE, BASE. RUBBER FEET WON'T HARM FLOORS.
WITH OPTIONAL BRACKETS, RAPID-REEL ® CAN BE MOUNTED DIRECTLY ONTO THE HANDLES OF MANY POPULAR AIR COMPRESSORS: - 920-156 - FITS MOST CRAFTSMAN® AND DEVILBISS COMPRESSORS.
- 920-163 - FITS CAMPBELL-HAUSFELD® AND COLEMAN POWERMATE®.
NOTE: ALL, EXCEPT 920-142, LIMITED TO QUANTITIES ON HAND. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
PORTER-CABLE® AIR HOSE
|
| 3/8" X 25' Vinyl Air Hose, 1/4"npt
...plus other(s)
|
GIVE YOUR AIR COMPRESSOR A BREAK BY USING ADDITIONAL PORTER-CABLE® VINYL AIR HOSE INSTEAD OF EXTENSION CORDS - YOU'LL GET THE SAME PRESSURE WHILE YOUR COMPRESSOR WILL LAST LONGER AND HAVE MORE POWER:
3/8" - 300 PSI. WILL ACCOMMODATE GRINDERS, SANDERS, DRILLS AND OTHER LARGE AIR TOOLS. 1/4" NPT MALE BRASS FITTINGS SECURED WITH FERRULES ON BOTH ENDS. PREMIUM PVC COVER WITH HEAVY-DUTY SPIRAL REINFORCEMENT. ABRASION RESISTANT, NON MARRING. USA.
|
|
|
|
Air Tool Accessories - Hoses
|
TOUGH 1/4" POLYETHYLENE TUBING STANDS UP TO AIR CLAMPING REQUIREMENTS
|
| 1/4" X 25' Yel P.e. Vacuum Tubing
...plus other(s)
|
AVAILABLE IN 25' OR 100' LENGTHS, 1/4" POLYETHYLENE TUBING OFFERS EXCELLENT RESISTANCE TO ALKALIS, PETROLEUM PRODUCTS, GREASES, ABRASION, FATIGUE AND CORROSION:
28" HG VACUUM RATING; 200 PSI BURSTING PRESSURE. BRIGHT YELLOW FOR EASY VISIBILITY. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
NPT QUICKFIT FITTINGS - 96-008. FOOT OPERATED AIR VALVES - 96-015.
|
|
|
|
Air Tool Accessories - Valves
|
FREE UP YOUR HANDS WHEN USING AIR TOOLS AND ACCESSORIES
|
| V4208 Valve 4-way Momentary
...plus other(s)
|
CONTROL THE AIR SUPPLY TO TOOLS USING VALVES THAT MAKE IT POSSIBLE TO BETTER CONCENTRATE ON THE JOB:
96-015 - MOMENTARY ACTION FOOT VALVE LETS AIR FLOW WHEN YOU DEPRESS IT; AIR STOPS WHEN FOOT IS REMOVED. USES 1/4" NPT FITTINGS (NOT INCLUDED). 96-016 - LATCHING FOOT VALVE IS A TREADLE TYPE WITH DETENT THAT REQUIRES A HEEL AND TOE MOTION TO CLAMP AND UNCLAMP. USES 1/4" NPT FITTINGS (NOT INCLUDED). 96-017 - 120° BENCH THROW VALVE USES 1/8" NPT FITTINGS (NOT INCLUDED). ONE PORT FOR INCOMING AIR, TWO PORTS TO RUN TUBING TO CYLINDERS PLUS AN EXHAUST VALVE. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
96-008 - NPT QUICKFIT FITTINGS. 96-018 - 1/4" NYLON AIR TUBING.
|
|
|
|
to see Sub Categories)