|
|
|
Adhesives - Not Listed Elsewhere
|
SILICONE X-TREME TAPE® IS MILITARY TOUGH FOR THE TOUGHEST JOBS
|
| Silicone X-treme Marine Tape
...plus other(s)
|
ORIGINALLY DEVELOPED FOR THE MILITARY, SILICONE X-TREME TAPE® IS A SUPER-STRONG, HIGH-QUALITY WRAP MADE FROM A SPECIAL SILICONE COMPOUND THAT ADHERES TO ITSELF WHEN WRAPPED UNDER TENSION:
USE FOR HOUSEHOLD, AUTOMOTIVE, PLUMBING AND ELECTRICAL REPAIRS; ALSO IDEAL FOR REDUCING HAND TOOL VIBRATION AND INCREASING GRIP. WITHSTANDS SALT WATER, UV RAYS, ACIDS, FUELS AND MORE - FORMS A PERMANENT AIR AND WATERTIGHT SEAL. 600 PSI TENSILE STRENGTH. STRETCHES TO 3 TIMES ITS LENGTH - CONFORMS TO IRREGULAR SHAPES. WON'T MELT UP TO +500°F.; REMAINS FLEXIBLE TO -60°F. INSULATES TO 8,000V. 1"W X 20 MIL THICK X 36' ROLL - BLACK. SILICONE X-TREME TAPE® MARINE HAS SIMILAR PROPERTIES BUT IS DESIGNED SPECIFICALLY FOR THE RIGORS OF MARINE ENVIRONMENTS. USE TO WRAP RIGGING HARDWARE, INSULATE AND WATERPROOF ELECTRIC WIRING AND WHIP ROPE ENDS. 1"W X 20 MIL THICK X 10' ROLL - WHITE. USA.
|
|
|
|
Adhesives - Not Listed Elsewhere
|
CLOTH REINFORCED, DOUBLE SIDED TAPE IDEAL FOR A VARIETY OF APPLICATIONS
|
| 2" Wide Double Stick Nylon Tape
...plus other(s)
|
DURABLE, TESA® DOUBLE SIDED CLOTH TAPE CAN BE USED FOR LAYING CARPET, REPLACING GRIPS ON TOOLS OR LIGHT DUTY MOUNTING APPLICATIONS:
11 MIL THICK WITH NYLON MESH AND RUBBER BASED ADHESIVE. 1" OR 2" WIDE ROLLS; EACH IS 75' LONG. GERMANY.
|
|
|
|
Adhesives - Not Listed Elsewhere
|
DOUBLE SIDED TAPE FOR MOUNTING WORK
|
| 1-1/2" X 36 Yd Double Stick Tape
...plus other(s)
|
HIGH TACK, PRESSURE SENSITIVE ADHESIVE WITH A COATED RELEASE LINER FOR HIGH PERFORMANCE:
IDEAL FOR MOUNTING SMALL BOWL BLANKS, ETC., ONTO FACEPLATES OR MOUNTING PATTERNS ONTO WOOD. EACH ROLL IS 36 YARDS LONG.
|
|
|
|
Adhesives - Not Listed Elsewhere
|
DON'T REPLACE ROTTED WOOD...WOOD FIX IT
|
| Wood Fix
|
SO SIMPLE TO USE, YET MR. MAC'S® WOOD FIX WITH POLYMER ACT-91™ BONDS SO STRONG:
SPECIAL LIQUID POLYMER/LATEX FORMULA MIXES WITH BASE POWDER TO PERMANENTLY REBUILD AND RESTORE ROTTED, SPLINTERED, BLISTERED OR CRACKED WOOD ON DECKS, WINDOW SILLS AND GLAZING, POSTS, FLOORS, EVEN STRUCTURAL DAMAGE. COATS AND SEALS TO PREVENT FURTHER DAMAGE - HELPS JOIN WOOD TO MASONRY OR WOOD TO GLASS. WATER-BASED, NON-EPOXY - 4 LB. PACKAGE MAKES ABOUT 1 QT. THAT COVERS 3.2 SQ. FT., 1/8" THICK. SAND AND SHAPE WHEN DRY.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Not Listed Elsewhere
|
BLUE FINISHER'S TAPE IS STAIN AND UV RESISTANT
|
| 3/4" X 60 Yd. Blue Finisher's Tape
|
PAPER-BACKED BLUE FINISHER'S TAPE USES A SPECIALLY FORMULATED MEDIUM-STRENGTH ADHESIVE THAT STAYS STUCK BUT RELEASES EASILY FOR UP TO 14 DAYS - EVEN WHEN EXPOSED TO DIRECT SUNLIGHT:
COMPATIBLE WITH LACQUER, POLYURETHANES, UNFINISHED WOOD, WALL PAPER AND UNPAINTED OR FRESHLY PAINTED WALLBOARD. RESISTS MOST CONTACT ADHESIVES, CLEAR FINISHES, PAINTS AND STAINS. CONFORMS WELL TO SEMI-SMOOTH SURFACES. 3/4" X 60 YARD ROLL. INTERIOR OR EXTERIOR APPLICATIONS. USA.
|
|
|
|
Adhesives - Not Listed Elsewhere
|
THE TOUGHEST TAPE ON PLANET EARTH™
|
| Gorilla Tape
|
YOU CAN SAY GOODBYE TO THAT OLD ROLL OF DUCT TAPE, NEW GORILLA TAPE BONDS TO THINGS ORDINARY TAPES CAN'T INCLUDING ROUGH WOOD, BRICK, STUCCO AND MORE - EVEN WORKS GREAT FOR MAKING QUICK CLAMPS FOR ODD SHAPED WOODWORKING PROJECTS:
DOUBLE THICK ADHESIVE FILLS GAPS FOR A "STICKIER" GRIP. STRONG, REINFORCED BACKING IS TIGHTLY WOVEN FOR IMPROVED CONFORMABILITY. TOUGH, ALL WEATHER SHELL CREATES A BARRIER TO SHUT OUT THE ELEMENTS AND RESIST ABRASION. 1-7/8" X 105' ROLL. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Not Listed Elsewhere
|
DOUBLE SIDED TAPE FOR MOUNTING WORK
|
| 1" X 36 Yd Double Stick Tape
...plus other(s)
|
HIGH TACK, PRESSURE SENSITIVE ADHESIVE WITH A COATED RELEASE LINER FOR HIGH PERFORMANCE:
IDEAL FOR MOUNTING SMALL BOWL BLANKS, ETC., ONTO FACEPLATES OR MOUNTING PATTERNS ONTO WOOD. EACH ROLL IS 36 YARDS LONG.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...NON-SAG PVA TRIM AND MOLDING GLUE
|
| Ol Yeller Nsg Glue
|
OL' YELLER™ NON SAG GLUE COMPARES FAVORABLY WITH SIMILAR GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA WOODWORKING ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. ESPECIALLY RECOMMENDED FOR VERTICAL GLUING APPLICATIONS. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...QUICK SET CABINET MAKER'S YELLOW GLUE
|
| Ol Yeller Quickset
...plus other(s)
|
OL' YELLER™ QUICK SET COMPARES FAVORABLY WITH SIMILAR GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. CLAMP TIME CAN BE AS SHORT AS 15 MINUTES BUT VARIES DUE TO HUMIDITY AND TEMPERATURE (A TEST PANEL IS SUGGESTED FOR CLAMP TIMES OF LESS THAN ONE HOUR). TYPICAL BONDING APPLICATIONS INCLUDE CABINETS, FURNITURE, INTERIOR DOORS, TRIM, PLYWOOD, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR EDGEBONDING AND MITER-FOLD (V-GROOVE) JOINTS. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® MELAMINE GLUE BONDS WOOD AND SHEET GOODS DIRECTLY TO MELAMINE
|
| Titebond Melamine 5gal
...plus other(s)
|
TITEBOND® MELAMINE GLUE HAS BEEN FORMULATED FOR BONDING WOOD, PARTICLEBOARD, MDF AND OTHER POROUS SUBSTRATES TO SYNTHETIC MATERIALS SUCH AS MELAMINE, VINYL AND HPL AS WELL AS METALS:
WATER BASED, NONFLAMMABLE, LOW ODOR AND DRIES CLEAR. THICKER FORMULATION OFFERS FEWER RUNS AND DRIPS, MAKING IT EASIER TO USE AND MORE EFFECTIVE FOR PRECISE ASSEMBLIES. FAST INITIAL TACK, YET A LONGER OPEN TIME ALLOWS FOR ACCURATE ALIGNMENT OF WORKING MATERIALS (10-15 MINUTE ASSEMBLY TIME AFTER APPLICATION; 12 HOUR SET TIME). CLEANS UP WITH WATER. NOTE: NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® WOOD MOLDING GLUE IS SPECIFICALLY FORMULATED FOR TRIM
|
| Franklin Wood Molding Glue
|
TITEBOND® WOOD MOLDING GLUE IS THE THICKEST, FASTEST DRYING GLUE AVAILABLE FOR POROUS AND SEMI-POROUS MATERIALS. IDEAL FOR FOR FINISH TRIM, CROWN MOLDING, BASEBOARDS, WINDOW CASINGS AND SIMILAR APPLICATIONS:
EXTRA THICK FORMULA HELPS FILL SMALL CRACKS AND GAPS. STRONG INITIAL TACK AND FAST SET SPEED (3-5 MINUTE ASSEMBLY TIME AFTER APPLICATION), YET ALLOWS REALIGNMENT OF WORKING PIECES; BOND STRONGER THAN THE WOOD ITSELF. EXCELLENT SANDABILITY; UNAFFECTED BY FINISHES. CLEANS UP WITH WATER. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. USA
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...WATER RESISTANT PVA GLUE
|
| Ol'yeller Waterdog
...plus other(s)
|
OL' YELLER™ WATER DOG IS AN INDUSTRIAL, WATER RESISTANT TYPE II PVA GLUE THAT STANDS UP TO THE BEST GLUES ON THE MARKET IN SHEAR (BOND STRENGTH PSI) AND WOOD FAILURE RATE TESTS BUT COSTS LESS:
INDUSTRIAL GRADE CROSSLINKING ALIPHATIC ADHESIVE FROM WOODWORKER'S SUPPLY® COMBINES THE CONVENIENCE OF A READY-TO-USE GLUE. PROVIDES TYPE II WATER RESISTANCE AND CREATES A BOND STRONGER THAN MOST WOOD SPECIES. TYPICAL BONDING APPLICATIONS INCLUDE INTERIOR/EXTERIOR DOORS, TRIM, PLYWOOD, EDGEBONDING, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR BONDING HIGH PRESSURE LAMINATE (HPL) TO WOOD OR WOOD-BASED SUBSTRATES. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
OL' YELLER™...CABINET MAKER'S YELLOW GLUE
|
| Ol'yeller Regular-1 Gallon
...plus other(s)
|
OL' YELLER™ REGULAR COMPARES FAVORABLY WITH OTHER YELLOW GLUES IN PERFORMANCE - BUT COSTS A LOT LESS!
INDUSTRIAL GRADE ALIPHATIC PVA ADHESIVE FROM WOODWORKER'S SUPPLY® CREATES A BOND STRONGER THAN MOST WOOD SPECIES. TYPICAL BONDING APPLICATIONS INCLUDE CABINETS, FURNITURE, INTERIOR DOORS, TRIM, PLYWOOD, EDGEBONDING, PANEL-TO-FRAME, GENERAL WOOD ASSEMBLY AND COUNTERTOPS. RECOMMENDED FOR BONDING HIGH PRESSURE LAMINATE (HPL) TO WOOD OR WOOD-BASED SUBSTRATES. HARD BOND LINES HAVE GOOD SANDING PROPERTIES. NON-FLAMMABLE, NON-HAZARDOUS, NON-STAINING AND EASY TO CLEAN-UP WITH WATER WHILE WET. USA.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® LIQUID HIDE GLUE
|
| Liquid Hide Glue 16oz.
...plus other(s)
|
|
SLOW SET SPEED PERMITS PRECISE ASSEMBLY OF PARTS. GREAT FOR CREATING CRACKLE FINISHES AND FINE FURNITURE REPAIR. TITEBOND® LIQUID HIDE GLUE IS ALSO THE RECOMMENDED GLUE FOR CANING PROJECTS.
|
|
|
|
Adhesives - Water Based
|
PREMIUM TITEBOND® GLUES FOR ALMOST ANY WOODWORKING APPLICATION
|
| Quart Original Titebond
...plus other(s)
|
TITEBOND® ADHESIVES SPREAD EASILY, ARE NON-TOXIC AND SOLVENT-FREE AND FORM SANDABLE, PAINTABLE AND EXTREMELY DURABLE BONDS WITH VIRTUALLY ANY POROUS OR SEMI-POROUS SURFACE - CLEAN UP WITH WATER:
TITEBOND® ORIGINAL WOOD GLUE IS THE INDUSTRY STANDARD FOR WOODWORKING:
STRONG INITIAL TACK AND FAST SET-SPEED REDUCE CLAMP TIME - DEVELOPS A BOND STRONGER THAN THE WOOD. IDEAL FOR WOOD, HARDBOARD, PARTICLEBOARD, LEATHER AND CLOTH. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. AVAILABLE IN PINTS, QUARTS, GALLONS AND 5-GALLON PAILS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 12 HOURS.
TITEBOND® DARK WOOD GLUE IS A DYED VERSION OF ORIGINAL WOOD GLUE:
AVAILABLE IN PINTS AND GALLONS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 12 HOURS.
TITEBOND® EXTEND WOOD GLUE IS A SLOWER-SETTING VERSION OF ORIGINAL WOOD GLUE:
SUPERIOR PERFORMANCE IN A BROAD RANGE OF APPLICATIONS, INCLUDING EDGE AND FACE GLUING - PARTICULARLY USEFUL IN COMPLEX OPERATIONS SUCH AS CURVED RAILINGS AND OTHER ASSEMBLIES THAT REQUIRE MORE TIME TO ALIGN. AVAILABLE IN PINTS AND GALLONS. ASSEMBLY TIME: 15 MINUTES. SET TIME: 24 HOURS. SIMILAR TO EXTEND WOOD GLUE, TITEBOND® II EXTEND WOOD GLUE CAN BE USED FOR EXTERIOR APPLICATIONS (ALSO AVAILABLE IN PINTS AND GALLONS).
TITEBOND® LIQUID HIDE GLUE SLOW SET-SPEED PERMITS PRECISE ASSEMBLY OF PARTS:
READY-TO-USE - MIXING, HEATING OR STIRRING NOT REQUIRED. RECOMMENDED FOR CANING PROJECTS - ALSO GREAT FOR CREATING CRACKLE FINISHES. NOT INTENDED FOR EXTERIOR USE OR WHERE MOISTURE IS LIKELY. AVAILABLE IN 4 OZ., 8 OZ. AND QUART CONTAINERS. ASSEMBLY TIME: 10 MINUTES. SET TIME: 12 HOURS.
TITEBOND® MELAMINE GLUE IS DESIGNED FOR BONDING WOOD, PARTICLE BOARD AND MDF TO SYNTHETIC MATERIALS SUCH AS MELAMINE, VINYL AND HPL AS WELL AS METALS:
FAST INITIAL TACK, YET HAS A LONGER OPEN TIME THAT ALLOWS FOR ACCURATE ALIGNMENT. THICKER FORMULATION - FEWER RUNS AND DRIPS. AVAILABLE IN PINTS AND GALLONS. ASSEMBLY TIME: 10-15 MINUTES. SET TIME: 12 HOURS.
TITEBOND® II PREMIUM WOOD GLUE IS IDEAL FOR EXTERIOR WOODWORKING PROJECTS, INCLUDING FURNITURE, BIRDHOUSES, MAILBOXES, PLANTERS AND PICNIC TABLES:
SO WATER RESISTANT, IT'S THE ONLY ONE-PART GLUE TO PASS ANSI/HPVA TYPE II WATER-RESISTANCE SPECIFICATIONS (NOT INTENDED FOR CONTINUOUS SUBMERSION). STRONG INITIAL TACK, FAST SET-SPEED, SUPERIOR STRENGTH AND EXCELLENT SANDABILITY. FDA APPROVED FOR INDIRECT FOOD CONTACT (CUTTING BOARDS) AND IDEAL FOR HOT PRESS AND RADIO FREQUENCY GLUING SYSTEMS. AVAILABLE IN PINTS, QUARTS, GALLONS AND 5-GALLON PAILS. ASSEMBLY TIME: 5 MINUTES. SET TIME: 24 HOURS.
TITEBOND® III ULTIMATE WOOD GLUE IS THE FIRST, ONE-PART, WOOD GLUE PROVEN WATERPROOF - PASSES ANSI/HPVA TYPE I WATER-RESISTANCE SPECIFICATIONS AND OFFERS SUPERIOR BOND STRENGTH, LONGER OPEN ASSEMBLY TIME AND LOWER APPLICATION TEMPERATURE (NOT INTENDED FOR CONTINUOUS SUBMERSION):
THE ULTIMATE IN WOOD GLUES - IDEAL FOR BOTH INTERIOR AND EXTERIOR APPLICATIONS. STRONG INITIAL TACK, SANDS EASILY WITHOUT SOFTENING AND FDA APPROVED FOR INDIRECT FOOD CONTACT (CUTTING BOARDS). USE AS AN ECONOMICAL SUBSTITUTE FOR POLYURETHANE WHEN GLUING UP MOST EXTERIOR WOOD - SAFER TO USE THAN TRADITIONAL WATERPROOF WOOD GLUES. AVAILABLE IN PINTS, QUARTS AND GALLONS. ASSEMBLY TIME: 8 MINUTES. SET TIME: 12 HOURS.
TITEBOND® WOOD MOLDING GLUE IS WELL-SUITED FOR APPLYING WINDOW CASINGS, FINISH TRIM, BASEBOARDS AND CROWN MOLDING:
STRONG INITIAL TACK, LONGER WORKING TIME. THICK AND FAST DRYING. INTERIOR APPLICATIONS - FOR EXTERIORS, USE TITEBOND® III ULTIMATE WOOD GLUE. AVAILABLE IN PINTS. ASSEMBLY TIME: 3-5 MINUTES. SET TIME: 24 HOURS.
ALL GLUES COVER APPROXIMATELY 200-250 SQ. FT. PER GALLON. NOTE: WHEN GLUING SOFT WOODS, 100-150 PSI CLAMPING PRESSURE IS RECOMMENDED - 175-250 PSI FOR HARDWOODS.
|
|
|
|
Adhesives - Water Based
|
LEICHTUNG WORK SHOPS® SUPER-STRONG, SPEED SET WOOD GLUE
|
| Speed Set Wood Glue 16 Oz.
|
LEICHTUNG WORK SHOPS® SPEED SET WOOD GLUE SETS IN JUST 20 MINUTES, THEN CURES IN ONLY TWO HOURS TO A BOND STRONGER THAN THE WOOD ITSELF (3,250 PSI):
DRIES CLEAR, SO IT'S GREAT FOR CABINETMAKING OR LAMINATES. RESISTS ALL PAINTS AND FINISHES AND SANDS EASILY - USE FOR EDGE GLUING, ASSEMBLY GLUING, VENEERING, CABINET MAKING - ANY JOB YOU DON'T WANT TO CLAMP FOR MORE THAN 20 MINUTES. NON-TOXIC. HANDY 16 OZ. SQUEEZE BOTTLE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Water Based
|
TITEBOND® DOWELING GLUE L.V. IS FOR USE WITH AUTOMATIC DOWELING EQUIPMENT
|
| Doweling Glue L.v.-5gal
|
ITS LOW VISCOSITY (140 CPS) ALLOWS THE APPROPRIATE FLOW THROUGH THE NARROW FEED LINES AND INJECTORS OF EUROPEAN-MADE DOWELING MACHINERY:
SETS FAST TO REDUCE ASSEMBLY TIME, OFFERS EXCELLENT STRENGTH AND PROVIDES A TRANSLUCENT GLUE LINE. FORMULATED FOR USE ON SOLID WOODS, PARTICLEBOARD, MDF, PLYWOOD AND OTHER POROUS MATERIALS. USA.
|
|
|
|
Adhesives - Water Based
|
SUPER TITEBOND® WOOD GLUE
|
| Super Titebond-5 Gal
|
AN EXCELLENT CHOICE FOR EDGE AND FACE GLUING, PROFESSIONAL GRADE SUPER TITEBOND® WOOD GLUE OFFERS SUPERIOR SANDABILITY AND SOLVENT RESISTANCE - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
BONDS STRONGER THAN WOOD AND PROVIDES A LONGER WORKING TIME THAN TRADITIONAL ALIPHATIC RESIN GLUES. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. 5 GALLON CONTAINERS. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® WHITE GLUE
|
| Titebond White Glue-gallon
...plus other(s)
|
IDEAL FOR GENERAL WOODWORKING, TITEBOND® WHITE GLUE PRODUCES A TRANSLUCENT GLUE LINE, OFFERS EXCELLENT SANDABILITY AND IS UNAFFECTED BY FINISHES - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
STRONG INITIAL TACK AND FAST SET SPEED SHORTEN CLAMP TIME. BONDS MOST POROUS AND SEMI-POROUS MATERIALS. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. AVAILABLE IN GALLON AND 5 GALLON CONTAINERS. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® ORIGINAL FLUORESCENT WOOD GLUE
|
| Titebond Flourescent Glue-qt
...plus other(s)
|
TITEBOND® ORIGINAL FLUORESCENT GLUE BONDS STRONGER THAN WOOD, OFFERS EXCELLENT SANDABILITY AND IS UNAFFECTED BY FINISHES - 5 MINUTE ASSEMBLY TIME FOLLOWING APPLICATION:
STRONG INITIAL TACK AND FAST SET SPEED SHORTEN CLAMP TIME. BONDS WOOD, HARDBOARD, LAMINATES AND PARTICLE BOARD. CLEAN UP WITH WATER; SCRAPE OFF DRIED EXCESS. AVAILABLE IN QUART AND 5 GALLON CONTAINERS. NOTE: BLACK LIGHT NOT INCLUDED. USA
|
|
|
|
Adhesives - Water Based
|
TITEBOND® COLD PRESS FOR VENEER
|
| Cold Press For Veneer Glue
...plus other(s)
|
TITEBOND® COLD PRESS FOR VENEER HAS BEEN SPECIFICALLY FORMULATED FOR LARGE SCALE BONDING OF VENEERS TO FLAT SURFACES. YOU CAN USE IT FOR COLD PRESS LAMINATING OF WOOD TO SOLID WOOD, PARTICLEBOARD, MDF, PLYWOOD OR OTHER POROUS MATERIALS:
MODERATE SET SPEED (15 MINUTE ASSEMBLY TIME AFTER APPLICATION), LEAVES A TRANSLUCENT GLUE LINE AND PRODUCES NO HARMFUL OR CORROSIVE FUMES. PREVENTS BLEED THROUGH ON OPEN GRAIN AND UNBACKED WOOD VENEERS. CLEANS UP WITH WATER WHEN GLUE IS WET. FOR CONSISTENT COVERAGE A MECHANICAL SPREADER IS RECOMMENDED. USA.
|
|
|
|
Adhesives - Water Based
|
FINALLY, A PVA WOOD GLUE THAT BONDS STRONGER THAN MOST WOOD AND HELPS FILL GAPS
|
| Critical Bond Ii
...plus other(s)
|
CRITICAL BOND II™ WOODWORKER'S GAP FILLING PVA GLUE IS A POLYVINYL ACETATE EMULSION ADHESIVE THAT CREATES A SUPER STRONG BOND FOR INTERIOR WOODWORK AND WORKS GREAT WITH ALMOST ANY SOFT WOOD AND HARDWOOD:
HIGH SOLIDS' CONTENT ENSURES SUPERIOR GAP FILLING, MANY TIMES ELIMINATING THE NEED FOR WOOD FILLER. NATURAL WOOD TONE COLOR HELPS GLUE JOINTS BLEND IN. NON-STAINING FORMULA HELPS PREVENT GLUE SPOTS ON YOUR WOOD, WHICH CAN CAUSE PROBLEMS WHEN APPLYING COLORED STAINS OR DYES. 10-20 MINUTE OPEN TIME; 30-90 MINUTE CLAMP TIME. NON-TOXIC AND NON-FLAMMABLE. WARM WATER CLEAN UP WHEN GLUE IS WET. CANADA.
|
|
|
|
Adhesives - Water Based
|
FIX LOOSE FURNITURE JOINTS WITH CHAIR-LOC®
|
| Chair-loc
|
NOT A GLUE, CHAIR-LOC® IS A SYNTHETIC PRODUCT THAT PENETRATES WOOD FIBERS, MAKING THEM SWELL TO TIGHTLY LOCK WOODEN JOINTS IN PLACE:
FIXES LOOSE CHAIRS AND LOCKS RUNGS, LEGS, BROOM HANDLES, GARDEN TOOLS, LADDERS, DOWELS AND MORE. THREE OZ. PLASTIC SQUEEZE BOTTLE WITH APPLICATOR NOZZLE. EASY SOAP AND WATER CLEAN UP. BUY SEVERAL SO THEY'RE ON HAND WHEN YOU NEED THEM.
|
|
|
|
Adhesives - Water Based
|
TITEBOND® II DARK WOOD GLUE IS MADE FOR DARKER WOOD
|
| 16 Oz Titebond Ii Dark
...plus other(s)
|
TITEBOND® II DARK WOOD GLUE IS A DYED VERSION OF TITEBOND II WOOD GLUE:
DARKER COLOR HELPS MAKE GLUE JOINTS IN DARK WOOD SUCH AS WALNUT LESS VISIBLE. SO WATER RESISTANT, IT'S THE ONLY ONE-PART GLUE TO PASS ANSI/HPVA TYPE II WATER-RESISTANCE SPECIFICATIONS (NOT INTENDED FOR CONTINUOUS SUBMERSION). ASSEMBLY TIME: 5 MINUTES. SET TIME: 24 HOURS. USA.
|
|
|
|
Adhesives - Tools
|
MULTI-FUNCTION PRODUCTION GLUE BOTTLE PROVIDES CONTINUOUS, EVEN FLOW DURING NUMEROUS APPLICATIONS
|
| Production Glue Bottle
...plus other(s)
|
AN EASY TO USE, HIGH QUALITY TOOL THE GLUEMASTER PRODUCTION GLUE BOTTLE IS UNIQUELY DESIGNED TO HANDLE WOOD, LAMINATE AND PINPOINT GLUING REQUIREMENTS:
SEAMLESS, 14 OZ. SYNTHETIC RUBBER PRODUCTION BOTTLE FEATURES A 1-5/16" OPENING FOR QUICK FILLING. DIE CAST, CONE SHAPED NOZZLE ACCEPTS INTERCHANGEABLE BRASS TIPS. EASY TO CLEAN.
954-392 - GLUEMASTER KIT INCLUDES PRODUCTION GLUE BOTTLE, DIE CAST NOZZLE, ROLLER HEAD ASSEMBLY AND DOWELING (D), BISCUIT JOINER (J), PRECISION (P) AND GENERAL PURPOSE (G) TIPS. 954-357 - PRODUCTION GLUE BOTTLE, DIE CAST NOZZLE AND GENERAL PURPOSE TIP, ONLY. 954-364 - DOWELING TIP HAS FOUR 5/64" APERTURES THROUGH WHICH GLUE COATS THE INSIDE OF DOWEL HOLES; DESIGNED FOR 3/4" TO 1/2" DOWELS. 954-371 - BISCUIT JOINER TIP FITS INTO BISCUIT GROOVES AND COATS SIDES OF CAVITY THROUGH TWO 5/64" APERTURES ON NOZZLE SIDES. 955-798 - PRECISION TIP HAS A 5/64" APERTURE FOR PLACING SMALL LINES OR SPOTS OF GLUE, ACCURATELY. 955-791 - GENERAL PURPOSE TIP, WITH 5/32" APERTURE, IS DESIGNED FOR LAYING BEADS OF GLUE ALONG EDGES, IN GROOVES OR ON FLAT OR CURVED SURFACES. 954-378 - ROLLER HEAD ASSEMBLY USES A SOFT, SYNTHETIC RUBBER ROLLER THAT'S EASILY STRIPPED OF ADHESIVE, WHETHER WET OR DRIED. USE WITH WATER BASED ADHESIVES.
|
|
|
|
Adhesives - Tools
|
SPREADING GLUE DOESN'T HAVE TO BE THE SLOWEST PART OF BISCUIT JOINERY
|
| Biscuit Glue Dispenser Kit
|
BISCUIT JOINERY IS THE FASTEST AND MOST FORGIVING WAY TO JOIN WOOD. AT LEAST IT'S THAT WAY UNTIL IT COMES TIME TO PUT GLUE IN ALL OF THOSE SLOTS:
OUR BISCUIT GLUING BOTTLE HAS A FLAT NOZZLE WITH THREE HOLES SO SLIPS INTO THE SLOT. PLUS, IT CAN SPREAD GLUE ANYWHERE ELSE SUCH AS ALONG THE EDGES OF BOARDS. COMES WITH AN 8 OZ. BOTTLE AND A UNIQUE BOX THAT REALLY SPEEDS UP THE JOB. BOX RESISTS TIPPING, KEEPS GLUE FROM DRYING ON THE TIP, KEEPS GLUE AT THE TIP AND HAS A CAP ON A LANYARD. INCLUDES BOTTLE, NOZZLE, CAP, SPONGE, BOX AND LID WITH RACK FOR LONG AND SHORT TERM STORAGE; NOZZLE FITS MOST 16 OZ. GLUE BOTTLES.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
909-293 - OL' YELLER™ YELLOW WOOD GLUE - CLICK HERE. 900-00 - BISCUITS, BISCUITS, BISCUITS - CLICK HERE.
|
|
|
|
Adhesives - Tools
|
PC-SUPEREPOXY® DISPENSING GUN MAKES APPLICATION CLEAN AND EASY
|
| 50 Ml Dispensing Gun
...plus other(s)
|
|
NO MIXING AND NO GUESSING WHEN USING THE PC-SUPEREPOXY® DISPENSING GUN (949-741): SIMPLY DROP 50ML EPOXY INJECTOR CARTRIDGE (949-734) INTO DISPENSING GUN, PULL THE TRIGGER AND EPOXY IS MIXED AND APPLIED; NO DRIP - APPLY TO BOTH VERTICAL AND OVERHEAD SURFACES. PC-SUPEREPOXY® BONDS WOOD, METAL, GLASS, FIBERGLASS, CONCRETE - JUST ABOUT ANYTHING. 15-20 MINUTE OPEN TIME; REACHES WORKING BOND STRENGTH IN 3-4 HOURS. DISPOSABLE STATIC MIXING NOZZLES (949-748) LET YOU USE THE GUN, AGAIN AND AGAIN.
|
|
|
|
Adhesives - Tools
|
EASILY APPLY GLUE WITH AN ADJUSTABLE BRUSH DISPENSER
|
| Adjustable Glue Dispenser
...plus other(s)
|
DURABLE PLASTIC JAR HOLDS UP TO 16 OZ. OF GLUE, WHILE THE MACHINED ALUMINUM APPLICATOR HAS A KNURLED HANDLE AND REPLACEABLE HORSEHAIR BRUSH TIP:
BRASS COMPRESSION FITTING IN AIRTIGHT LID HOLDS BRUSH AT PROPER HEIGHT - CLEAN-UP IS MINIMAL. COMPATIBLE WITH ALL BUT THE MOST CORROSIVE GLUES. USA. NOTE: ALWAYS REMOVE, CLEAN AND STORE BRUSH SEPARATELY AFTER USE.
|
|
|
|
Adhesives - Tools
|
REPAIR FURNITURE, LAMINATES OR VENEER WITHOUT DISASSEMBLY
|
| High Pressure Glue Injector
...plus other(s)
|
PRECISION MACHINED, THE PATENTED MAX HIGH PRESSURE GLUE INJECTOR DEVELOPS UP TO 600 PSI FOR EXCEPTIONAL GLUE DISPENSING - PERFECT FOR REPAIRING FURNITURE JOINTS, VENEERS AND LAMINATES, CABINETRY, MUSICAL INSTRUMENTS, STAIR RAILS AND MORE:
7/8" X 6-5/8" X 4-1/2" OVERALL - DURABLE, HIGH-IMPACT PLASTIC BARREL AND DOUBLE-HANDLE GRIP. SOLID BRASS 1/32" DIA. NOZZLE HAS O-RING TO PREVENT GLUE BACKUP. PLUNGER AND NOZZLE REMOVE EASILY FOR CLEANING (USE ONLY WHITE OR YELLOW WATER-BASED GLUES). ADDITIONAL 1/32" DIA. NOZZLE OR OPTIONAL 1/16" DIA. NOZZLE SOLD SEPARATELY. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Tools
|
GLUE INJECTORS PUT GLUE WHERE YOU WANT IT WITH LESS MESS
|
| 10cc Glue Injector
...plus other(s)
|
FASTER, MORE ACCURATE AND TIDIER GLUING IS ALMOST ASSURED WHEN YOU USE GLUE INJECTORS:
178-001 - 10CC TAPER POINT IS A MOLDED ONE PIECE INJECTOR. 910-144, 910-151 - 10CC OR 20CC SYRINGE HAS REMOVABLE 1" AND 1-1/2" TIPS. FIVE PACKS INCLUDE ONLY SYRINGES OR TIPS. 891-903, 891-541 - INJECTOR BOTTLES ARE USEFUL WITH GLUE AS WELL AS OIL. 897-541 - SAVE MONEY WITH AN ECONOMY 12 PACK OF 15CC INJECTORS!
|
|
|
|
Adhesives - Tools
|
18 PIECE ALL IN ONE GLUE SPREADER KIT
|
| All In One Glue Spreader Kit
|
OUTFITTED WITH A LARGE SELECTION OF APPLICATORS, THE ALL IN ONE GLUE SPREADER KIT PROVIDES A SINGLE, CONVENIENT LOCATION FOR YOUR GLUING REQUIREMENTS:
INCLUDES TWO 8 OZ. SCREW TOP BOTTLES, ONE ROLLER HEAD, ONE FLAT HEAD FOR BISCUITS, 8 ASSORTED HEADS FOR DOWELS, ETC., GLUE BRUSH, WET WELL, TWO VIALS AND CAPS FITTED INTO A 6" X 8-7/8" BASE. VINYL COMPONENTS ARE EASY TO CLEAN. IMPORTED.
|
|
|
|
Adhesives - Tools
|
HOT MELT GLUE GUN CAN BE USED ALMOST ANYWHERE
|
| Cordless Glue Gun
|
READY TO USE IN JUST 3 MINUTES, THE COMPACT AD TECH CB1000 CORDLESS GLUE GUN IS PERFECTLY SUITED FOR MOST JOBS AND IS COMPLETELY PORTABLE:
PRODUCES 383°F AND USES STANDARD 1/2" DIA. GLUE STICKS (NOT INCLUDED). UP TO A 120 MINUTE RUN TIME - REFILLABLE IN 10 SECONDS OR LESS USING BUTANE LIGHTER FLUID (NOT INCLUDED). ALL IN ONE ON/OFF SWITCH, GAS LEVEL WINDOW AND DETACHABLE SAFETY STAND. 6-1/4"H X 1-1/4"W X 6-1/4"L. IRELAND.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
GENERAL PURPOSE 4" CLEAR GLUE STICKS - 895-016.
|
|
|
|
Adhesives - Tools
|
LARGE CAPACITY GLUE WELL WILL KEEP YOUR GLUE HANDY AND FRESH
|
| .9 Liter Glue Well
...plus other(s)
|
WITH A CAPACITY OF ALMOST 29 OZ., GLUE WELL DOES NOT REQUIRE CONSTANT FILLING AND ITS WIDE, 2-1/2" DIA. MOUTH MAKES IT EASY TO GET JUST THE RIGHT AMOUNT OF GLUE ONTO YOUR BRUSH:
INTEGRATED SPOUT MAKES FILLING SIMPLE. TIGHT FITTING LID CAN ACCOMMODATE A NARROW HANDLE BRUSH UP TO 2"W X 7"L (INCLUDING BRISTLES) AND HELPS KEEP THE BRUSH AND GLUE FROM DRYING OUT. LID STORES ON TOP WHEN GLUE WELL IS BEING USED. DURABLE, WASHABLE, BREAK RESISTANT PLASTIC. IMPORTED. 981-864 - GLUE WELL SET INCLUDES A 16 OZ. BOTTLE OF CRITICAL BOND II™ WOODWORKER'S GLUE.
|
|
|
|
Adhesives - Tools
|
NO MORE MESSY TIPS WITH GLÜ-BOT - THE GLUE BOTTLE THAT DOES NOT DRIP
|
| Glu-bot-16oz
...plus other(s)
|
ACCORDING TO THE MANUFACTURER, THE EASY SQUEEZE FASTCAP™ GLü-BOT IS THE ONLY GLUE BOTTLE THAT WILL NOT DRIP OR SPILL - SUCTION ACTION DRAWS GLUE BACK INTO THE CONTAINER FOR A CLEAN TIP EVERY TIME:
VERTICAL DESIGN LETS YOU APPLY GLUE WHERE YOU WANT IT AND ONLY WHERE YOU WANT IT. VACUUM VALVE KEEPS THE GLUE LEVEL HIGH EVEN WHEN THE GLUE GETTING LOW. WIDE MOUTH FOR EASY FILLING AND A WIDE BOTTOM FOR EXTRA STABILITY. 16 OZ. AND 4 OZ. SIZES - EACH INCLUDES LID, RETAINING RING PLUS ONE BLADE AND ONE YORKER TIP WITH RECOMMENDED CUT LINES. WORKS WITH MOST GLUES AND SOLVENTS (NOT INCLUDED).
|
|
|
|
Adhesives - Tools
|
PIZZI 9001 PNEUMATIC FEEDER CAN DISPENSE 1-1/2 GALLONS OF GLUE WITHOUT RECHARGING
|
| Pneumatic Glue Feeder
...plus other(s)
|
THE PIZZI 9001 PNEUMATIC FEEDER IS AN IDEAL CHOICE FOR PRODUCTION GLUING IN A WOODWORKING SHOP OR ON THE JOB SITE:
FILL INTERNAL CONTAINER WITH 1-1/2 GALLONS GLUE, SEAL OUTER STEEL CONTAINER, PRESSURIZE TO 75 PSI, DISCONNECT AND APPLY GLUE WITHOUT HOSE OR WIRE INTERFERENCE. USE WITH FSV ADHESIVE AND ALL PVA TYPE WATER BASED WOOD GLUES. ALL GLUE IS DISPENSED WITHOUT RECHARGING. ENCLOSED SYSTEM NEVER NEEDS CLEANING WHEN USING SAME TYPE OF GLUE; OCCASIONAL TIP CLEANING IS RECOMMENDED. INCLUDES 13' NYLON REINFORCED HOSE W/FITTINGS, ADJUSTABLE FLOW UNIVERSAL NOZZLE, 1/4" QUICK DISCONNECT FITTING, PRESSURE GAUGE AND SAFETY RELIEF VALVE. APPROXIMATELY 24" TALL (INCLUDING HANDLE) X 8" DIA.; WEIGHS 31 LBS. ITALY. NOTE: FOR CUSTOMIZED NOZZLES, CYLINDERS, ROLLERS OR BRUSHES, CALL 800-645-9292 WITH YOUR REQUIREMENTS.
|
|
|
|
Adhesives - Tools
|
INGENIOUS CAULKING GUN EASILY HANDLES 4 AND 5.5 OZ. TUBES
|
| Formfill Caulking Gun
|
THE FORMFILL® CAULKING GUN IS LIGHTWEIGHT, EASY TO USE, VERSATILE, COST EFFICIENT AND SAVES MONEY:
FITS MOST 4 AND 5.5 OZ. TUBES OF CAULKS AND ADHESIVES, ELIMINATING THE NEED FOR 10 OZ. CARTRIDGES. UNIQUE CONTROLLED-FLOW DESIGN (LETTING UP THE TRIGGER STOPS THE FLOW) GIVES UNPRECEDENTED ACCURACY AND ELIMINATES WASTE. APPLIES PERFECT BEADS DOWN TO THE LAST DROP WITH NO STOPS AND STARTS, OVERFILLS AND BREAKS. IDEAL FOR CRAMPED AND HARD-TO-REACH PLACES.
|
|
|
|
Adhesives - Tools
|
HEAVY DUTY STRETCH WRAP PACKAGING
|
| 3"x1000' Stretch Wrap
...plus other(s)
|
THE SAME STRETCH WRAP PACKAGING USED BY PROFESSIONAL MOVERS AND PACKAGERS:
WRAP BOXES, CABINETS AND OTHER ITEMS FOR SHIPPING OR FOR STORAGE. 3" AND 5" WIDTHS; 1,000'LENGTH. CAN ALSO BE USED TO SEAL OFF UNUSED AIR VENTS AND TIE DOWN LOADS.
|
|
|
|
Adhesives - Specialty
|
J.E. MOSER'S® PREMIUM WATERPROOF POLYURETHANE GLUE BONDS A VARIETY OF MATERIALS
|
| Critical Bond-17oz.
...plus other(s)
|
CRITICAL BOND™ IS ONE OF THE FINEST INDUSTRIAL ADHESIVES WE'VE TESTED AND COSTS LESS THAN MANY COMPARABLE BRANDS:
USE TO BOND WOOD, STONE, METAL, CERAMICS, PLASTICS, GLASS AND MORE. CREATES A GAP FILLING, WATERPROOF, STRUCTURAL BOND WITHOUT MIXING (NOT FOR SUBMERSIBLE APPLICATIONS). SAFE TO USE INDOORS AND OUTDOORS AND WILL NOT EXPAND OR SHRINK AFTER HARDENING. FLOWS AND SPREADS EASILY - NORMALLY REQUIRES JUST A THIN FILM ON ONE SURFACE BEFORE CLAMPING. TOTAL ASSEMBLY TIME IS 25 MINUTES; CLAMP TIME IS 1-4 HOURS. USA.
|
|
|
|
Adhesives - Specialty
|
ALL PURPOSE WHITE, HOT MELT GLUE STICKS ARE STANDARD 1/2" DIAMETER
|
| White 4" Glue Sticks
|
MILKY WHITE, HOT GLUE STICKS ARE AN EXCELLENT, ALL PURPOSE GLUE THAT WORKS BEST ON POROUS MATERIALS:
35 TO 40 SECOND WORKING TIME. APPROXIMATELY 45 STICKS PER 1 LB. PACKAGE.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Adhesives - Specialty
|
ALL HOT MELT GLUES ARE NOT CREATED EQUAL
|
| 10" High Strength Glue Stk
...plus other(s)
|
SELECT FROM THREE DIFFERENT HOT MELT GLUES TO MATCH THE EXACT DEMANDS OF YOUR APPLICATION:
ECONOMY CLEAR IS AN EXCELLENT, ALL PURPOSE GLUE THAT WORKS BEST ON POROUS MATERIALS - 35 TO 45 SECOND WORKING TIME. GENERAL PURPOSE CLEAR IS FOR NON-POROUS MATERIALS LIKE PLASTICS AND GLASS - 30 TO 40 SECOND WORKING TIME. HIGH-PERFORMANCE TAN HAS A 20 TO 30 SECOND WORKING TIME AND WORKS WELL WITH FABRIC, LEATHER UPHOLSTERY, ALL WOODS AND PARTICLE BOARD. 4" OR 10" LONG GLUE STICKS ARE 1/2" DIA. APPROXIMATELY 45, 4" STICKS PER LB.; 18, 10" STICKS PER LB.
|
|
|
|
to see Sub Categories)
