|
|
|
Abrasives - Accessories
|
VITRIFIED AND RESIN BONDED MOUNTED POINTS
|
| 3/4x2-1/2x1/4 Resin Bonded
...plus other(s)
|
A&H ABRASIVES™ VITRIFIED AND RESIN BONDED MOUNTED POINTS ARE PRECISION GRINDING SPECIALITY PRODUCTS:
VITRIFIED POINTS ARE 60 GRIT ALUMINUM OXIDE GRAIN, HEATED AND COMPRESSED TO SHAPE ON A 1-1/2" LONG X 1/4" DIA. SHANK. PINK VITRIFIED POINTS ARE USED FOR DEBURRING AND FINISHING FERROUS METALS. GRAY RESIN BONDED POINTS ARE 36 GRIT ALUMINUM OXIDE GRAIN. PERFECTLY BALANCED FOR FAST FERROUS METAL REMOVAL AND HEAVY DUTY USE. 1-1/2" LONG X 1/4" DIA. SHANK. NOTE: CUT SPEED IS THE MAXIMUM RECOMMENDED RPM. USA.
|
|
|
|
Abrasives - Accessories
|
SPIRALCOOL RESIN FIBER ABRASIVE DISC BACKUP PADS EXTEND DISC LIFE
|
| 9" Med Resin Fiber Back Up Pad
...plus other(s)
|
SPIRALCOOL BACKING PADS ARE HIGHLY RECOMMENDED FOR USE WITH ALL RESIN FIBER DISCS:
SLOTTED HUB DRAWS COOL AIR BEHIND THE DISC WHILE SPIRAL-SHAPED RIBS PROVIDE CONTACT POINTS AND FORM CHANNELS FOR AIR FLOW - DESIGN EXTENDS DISC LIFE 30% TO 50%. EXCLUSIVE RUBBER, FABRIC AND FIBERBOARD CONSTRUCTION GIVES EXTRA STRENGTH AND RELIABILITY. EACH PAD IS MACHINE TESTED FOR BALANCE TO PROVIDE EVEN WEAR ON YOUR SANDING DISCS. 5/8-11 THREADED HUBS. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CERAMIC RESIN FIBER ABRASIVE DISCS - 127-504. ZIRCONIA ALUMINA ABRASIVE DISCS - 125-516. ALUMINUM OXIDE ABRASIVE DISCS - 100-808. SILICON CARBIDE ABRASIVE DISCS - 121-076.
|
|
|
|
Abrasives - Accessories
|
SURFACE PREPARATION DISC HOOK AND LOOP BACKUP PADS AND MANDRELS
|
| 4" X M10-0.125 H&l Surf Prep Pad
...plus other(s)
|
A&H ABRASIVES™ H&L BACKUP PADS AND MANDRELS HAVE A HEAVY DUTY LOOP DESIGNED TO FIRMLY HOLD SURFACE PREP DISCS:
FIT MOST ANGLE GRINDERS, DIE GRINDERS AND ANY TOOL THAT ACCEPTS A 1/4" MANDREL. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
SURFACE PREPARATION H&L DISCS - 125-576.
|
|
|
|
Abrasives - Accessories
|
LUBRICANT CAN DOUBLE THE LIFE OF YOUR SANDING BELTS OR DISCS
|
| 3.2 Oz Mag Lub Abrasive Lubricant
...plus other(s)
|
MAGLUBE® SOLID BLOCK LUBRICANT REALLY WORKS AND IS COMPLETELY BIODEGRADABLE, SAFE AND CAN DOUBLE THE LIFE OF ABRASIVE BELTS OR DISCS:
KEEPS SANDPAPER CLEAN AND SHARP LONGER - WON'T SPOT OR STAIN WOOD. GENTLY RUB ON FOR IMMEDIATE RESULTS. 1-3/8"H X 2-3/4"W X 1-13/16"D BLOCK; 2" DIA. X 9" TUBE. BEST RESULTS ARE ACHIEVED WHEN USED IN COMBINATION WITH AN ABRASIVE CLEANING STICK. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
ABRASIVE CLEANING STICKS - 111-001.
|
|
|
|
Abrasives - Accessories
|
3M™ FEATHERING DISC ADHESIVE BONDS ABRASIVE DISCS TO BACK-UP PADS
|
| Feathering Disc Adhes 50z Tube
|
A TRANSPARENT, FAST-DRYING ADHESIVE FOR ADHERING PAPER- OR CLOTH-BACKED ABRASIVE DISCS TO CLOTH, SPONGE RUBBER, METAL, PLASTIC OR OTHER BACK-UP PLATES, 3M™ FEATHERING DISC ADHESIVE (TYPE II) IS SPECIALLY FORMULATED TO ALLOW MULTIPLE APPLICATIONS WITHOUT ADHESIVE BUILDUP OR PAPER DELAMINATION:
DESIGNED FOR USE WITH A-WEIGHT ABRASIVE DISCS. SOLD IN 5 OZ. TUBES. NOTE: GROUND SHIPMENT ONLY.
|
|
|
|
Abrasives - Accessories
|
BOSCH RANDOM ORBIT SANDER/POLISHERS PROVIDE A SMOOTH, CONSISTENT FINISH
|
| 6" Extra Soft Backing Pad
...plus other(s)
|
A WORKBENCH® MAGAZINE AWARD OF QUALITY JULY 2004 EDITOR'S CHOICE, THE BOSCH 1250DEVS 6" DUAL MODE RANDOM ORBIT SANDER/POLISHER HAS TWO OPERATING MODES - RANDOM ORBIT FOR NORMAL STOCK REMOVAL AND "TURBO" DRIVEN ECCENTRIC ORBIT FOR MORE AGGRESSIVE REMOVAL:
120VAC, 6.5A, 3,100 TO 6,650 OPM MOTOR. CONSTANT RESPONSE CIRCUITRY™ MAINTAINS PAD SPEED UNDER HEAVY LOADS AND PROTECTS AGAINST OVERLOADS. BUILT-IN PASSIVE DUST COLLECTION SYSTEM (VACUUM CLEANER AND HOSES REQUIRED). TAPERED, SOFT-GRIP TOP AND NARROW BARREL GRIP. INCLUDES DUST TUBE, 6-HOLE HOOK & LOOP (H&L) SOFT BACKING PAD, SANDING DISC, AMBIDEXTROUS AUXILIARY HANDLE AND PAD WRENCH. 6"H X 6"W X 12"L. 5.3 LBS. NET WEIGHT; 7.2 LBS. SHIPPING WEIGHT.
THESE BOSCH 5" AND 6" RANDOM ORBIT SANDER/POLISHERS COME WITH THE MICROFILTER™ SYSTEM THAT TRAPS 120% MORE DUST THAN CLOTH BAGS. DURABLE AND REUSABLE AIR FILTER AND CANISTER, SIMILAR TO WHAT IS FOUND IN AUTOMOBILES, ARE EASY TO EMPTY AND CLEAN:
1295D 5" PALM RANDOM ORBIT SANDER/POLISHER: 120V, 2A, 12,000 OPM MOTOR. 8 HOLE H&L SANDING ACCESSORIES - THROUGH THE PAD DUST COLLECTION. 5"H X 3.5"W X 10"L. 3.4 LBS. NET WEIGHT; 4.3 LBS. SHIPPING WEIGHT.
1295DVS 5" PALM VARIABLE SPEED RANDOM ORBIT SANDER/POLISHER: SAME AS 1295D BUT WITH A 2.2A, 7,000-12,000 OPM MOTOR. 3.5 LBS. NET WEIGHT; 4.5 LBS. SHIPPING WEIGHT.
3727DEVS 6" ELECTRONIC VARIABLE SPEED RANDOM ORBIT SANDER/POLISHER: 120V, 3.3A, 4,500-12,000 OPM MOTOR. REMOVABLE FRONT HANDLE FOR WORK IN CLOSE QUARTERS. 8 HOLE H&L SANDING ACCESSORIES - THROUGH THE PAD DUST COLLECTION. 5.25"H X 6"W X 12"L. 5.2 LBS. NET WEIGHT; 6.3 LBS. SHIPPING WEIGHT.
3725DEVS 5" ELECTRONIC VARIABLE SPEED RANDOM ORBIT SANDER/POLISHER: SIMILAR TO 3727DEVS BUT USES 5" H&L ACCESSORIES. 5"H X 5"W X 12"L. 5.1 LBS. NET WEIGHT; 6.2 LBS. SHIPPING WEIGHT.
DUST CANISTER, SOFT BACKING PAD, WRENCH AND SANDING DISC INCLUDED. ONE-YEAR MANUFACTURER'S WARRANTY. IMPORTED.
OPTIONAL MICROCELLULAR™ BACKING PADS PROVIDE FIVE TIMES THE LIFE SPAN OF REGULAR PADS.
|
|
|
|
Abrasives - Accessories
|
ABRASIVE BELT GREASE STICK
|
| Abrasive Belt Grease Stick F-26
...plus other(s)
|
USE FORMAX ABRASIVE BELT GREASE STICKS ON BELTS AND DISCS TO PREVENT LOADING AND GLAZING AS WELL AS TO HELP THEM CUT COOLER WITH COATED ABRASIVE PRODUCTS:
F-26 SPREADS OUT THINLY AND REMAINS WET ON THE BELT. IT PROVIDES LUBRICATION BY PENETRATING THE COATED ABRASIVE SURFACE - RECOMMENDED FOR ALL BELT AND DISC POLISHING OPERATIONS INVOLVING METALS, PLASTIC AND GLASS. F-115 IS A COMBINATION OF BELT GREASE AND TRIPOLI ABRASIVE - RECOMMENDED FOR BELT POLISHING NON-FERROUS METALS. A COMBINATION OF BELT GREASE AND SOFT ALUMINUM OXIDE, F-122 IS RECOMMENDED FOR BELT POLISHING ALL TYPES OF STEEL. USA.
|
|
|
|
Abrasives - Accessories
|
ABRASIVE CLEANING STICKS GET EXTRA MILEAGE OUT OF LOADED SANDING BELTS AND DISCS
|
| Abrasive Cleaning Stick
...plus other(s)
|
USED LIKE GIANT ERASERS, ABRASIVE CLEANING STICKS REMOVE PITCH AND LOADED DUST FROM SANDING DISCS AND BELTS:
DIFFERENT SIZES AND SHAPES FOR ALL APPLICATIONS. CLEANED BELTS AND DISCS WORK EVEN BETTER AFTER BEING TREATED WITH SOLID BLOCK LUBRICANT. USA.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
MAGLUBE® SOLID BLOCK LUBRICANT - 110-021.
|
|
|
|
Abrasives - Accessories
|
PREPPIN' WEAPON IS THE BEST DESIGNED HAND SANDING BLOCK, EVER
|
| Preppin Weapon Sanding Block
|
THE PREPPIN' WEAPON SANDING BLOCK LETS YOU LOAD UP TO FOUR SHEETS OF SANDPAPER AT ONE TIME AND THEN TEAR OFF EACH SHEET AS IT WEARS OUT:
USES 1/4 SHEETS CUT FROM 9" X 11" SANDPAPER. EASY TO USE LEVER ACTION CLIPS MAKE RELOADING A SNAP. HIGH IMPACT ABS PLASTIC BODY. POLISHED STAINLESS STEEL CLIPS WON'T RUST, PERMITTING DRY OR WET SANDING - STYROFOAM CORE MEANS BLOCK WILL FLOAT. TAPERED EDGES ALLOW SANDING INTO CORNERS. COMFORTABLE GRIP REDUCES FATIGURE DURING EXTENDED PERIODS OF WORK. 7-3/4"L X 2-3/4"W, WEIGHS 1 LB. USA.
|
|
|
|
Abrasives - Accessories
|
5" AND 6" ROUND RUBBER HAND SANDERS - A MUST IF YOU OWN A RANDOM ORBITAL SANDER
|
| 5" Psa Round Rubber Hand Sander
...plus other(s)
|
USING THE SAME 5" OR 6" DIA. HOOK & LOOP (H&L) OR PRESSURE SENSITIVE ADHESIVE (PSA) DISC SANDPAPER AS YOUR POWERED SANDER, A ROUND RUBBER HAND SANDER WORKS GREAT WITH FINE GRIT TO GET OUT THE FINAL SWIRL MARKS LEFT BY A RANDOM ORBIT SANDER:
EASY GRIP HANDLE FOR QUICK AND EFFICIENT HAND SANDING. ALTHOUGH ROUND AND FLAT, SANDER WILL STILL ROLL UP ONTO A BACK SPLASH OR GENTLE CONTOUR, WHEN NEEDED.
|
|
|
|
Abrasives - Accessories
|
COARSE FLEXIBLE SANDING PADS HANDLE CONTOURS
|
| Flexible Sanding Pads (coarse)
|
FEATURING A CLOTH BACK INSTEAD OF THE USUAL PAPER BACKING, GLIT® COARSE FLEXIBLE SANDING PADS HOLD UP EVEN WHEN WET SANDING:
MADE FROM THE FINEST ALUMINUM OXIDE; CLEAN BY RINSING IN WATER. OUTLAST REGULAR SANDPAPER BY AS MUCH AS 10 TIMES. PERFECT FOR LATHE WORK SINCE THE 1/2" FOAM PAD KEEPS HEAT BUILD-UP FROM YOUR FINGERS. EACH PAD IS 3" X 4" X 1/2".
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Accessories
|
PSA SANDING PROFILES EASILY HANDLE CONTOUR SANDING
|
| Tadpole Small Flat Grip Set
...plus other(s)
|
USE SOFT, PREFORMED SANDING PROFILES ALONG WITH PRESSURE SENSITIVE ADHESIVE (PSA) SANDPAPER TO SMOOTH ALMOST ANY SURFACE:
CHOOSE FROM FLAT, CONCAVE, CONVEX OR ANGLED PROFILES.
LIMITED TO QUANTITIES ON HAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
PRECUT PSA SANDPAPER - 123-596.
|
|
|
|
Abrasives - Accessories
|
CONVERT PSA ORBITAL SANDERS TO H&L
|
| H&l Conversion Kit W/psa
...plus other(s)
|
HOOK & LOOP (H&L) BACKED ABRASIVE IS MUCH MORE REUSABLE THAN PRESSURE SENSITIVE ADHESIVE (PSA):
OUR CONVERSION KIT (901-872) INCLUDES 2 SQUARES OF H&L MATERIAL WITH A PEEL AND STICK BACK. CUT THE MATERIAL TO FIT YOUR SANDER AND STICK IT ON. IT'S THAT SIMPLE. CAN BE REMOVED TO CONVERT BACK TO PSA. 850-112 - MAKE YOUR OWN H&L CORK SANDING BLOCK BY CUTTING A 2" X 4" PIECE OF H&L MATERIAL AND APPLYING IT TO THE BOTTOM OF THE BLOCK.
|
|
|
|
Abrasives - Accessories
|
REPLACEMENT H&L AND PSA PADS FOR RANDOM ORBIT SANDERS
|
| Pad, Psa 5" Pc332
...plus other(s)
|
QUALITY REPLACEMENTS FOR THE ORIGINAL PADS ON MANY POPULAR RANDOM ORBIT SANDERS. AVAILABLE WITH HOOK & LOOP (H&L) OR PRESSURE SENSITIVE ADHESIVE (PSA) FACES:
908-204 - 5", 5 HOLE H&L - PORTER-CABLE® 97355. 908-246 - 5", 5 HOLE PSA - SIOUX® 690X. 908-232 - 5", SOLID PSA - SIOUX® 690. 908-239 - 6", 6 HOLE PSA - SIOUX® 697W. 908-211 - 6", SOLID PSA - PORTER-CABLE® 97366. 915-485 - 5", 5 HOLE H&L - PORTER-CABLE® 333. 915-492 - 5", 5 HOLE PSA - PORTER-CABLE® 334. 908-218 - 5", 8 HOLE H&L - DEWALT® DW421. 908-225 - 5", 8 HOLE PSA - DEWALT® DW422. 908-197 - 5", SOLID PSA - PORTER-CABLE® 332. 909-898 - 6", 6 HOLE H&L - DEWALT® DW441, 444. 909-905 - 6", 6 HOLE H&L - DEWALT® DW443. 123-251 - 6", 6 HOLE H&L X-SOFT PAD - BOSCH 3727 DEVS. 820-949 - 5", 8 HOLE H&L SOFT PAD - BOSCH 3725DVS, 3107DVS, 1295D, 1295DVS. 10,000 MAXIMUM RPM FOR 6"; 12,000 RPM FOR 5". CALL FOR AVAILABILITY ON MODELS NOT LISTED. USA.
|
|
|
|
Abrasives - Accessories
|
A GRAPHITE COATED PLATEN IMPROVES BELT SANDER PERFORMANCE
|
| 4" Wide Graphite Canvas
...plus other(s)
|
AN EASY-TO-INSTALL ACCESSORY THAT HELPS REDUCE FRICTION AND HEAT BUILD-UP, WITH A&H ABRASIVES™ GRAPHITE-COATED PLATENS YOU CAN PUT MORE PRESSURE ONTO YOUR SANDER AND STILL MAINTAIN BELT SPEED:
PRICED PER YARD, 4", 5" OR 6" WIDE GRAPHITE-COATED CANVAS COMES IN CONTINUOUS ROLLS FOR CUSTOM APPLICATIONS. SOLD WITHOUT PSA BACKING (APPLY SPRAY ADHESIVE FOR A SOLID BOND). SOLD IN PACKAGES OF THREE; PRESSURE SENSITIVE ADHESIVE (PSA) BACKED PLATENS ADHERE TO YOUR SANDER'S METAL BASEPLATE. 3" X 6" FITS 3" X 21" BELT SANDERS. 4" X 6" IS FOR 4" X 24" BELT SANDERS. 6" X 18" IS FOR 6" X 48" BELT SANDER/CUSTOM APPLICATIONS. USA.
TO HELP COMPLETE YOUR PURCHASE, MAY WE SUGGEST:
3M™ REPOSITIONABLE 75 SPRAY ADHESIVE - 100-169.
|
|
|
|
Abrasives - Accessories
|
PADDED INTERFACE PADS FOR RANDOM ORBIT SANDERS
|
| 5"interface Pad H&l/psa
...plus other(s)
|
SPONGY PADS DESIGNED TO HANDLE GENTLE RADII OR CURVED SURFACES:
HOOK & LOOP (H&L) FRONT; BACK IS EITHER H&L OR PRESSURE SENSITIVE ADHESIVE (PSA). 5" AND 6" DIAMETERS. USA.
|
|
|
|
Abrasives - Accessories
|
DYNABUG® AIR SANDER FITS RIGHT INTO TIGHT CORNERS
|
| Rplcmt Backup Pad For Dynabug
...plus other(s)
|
VIRTUALLY ELIMINATE HAND SANDING INSIDE CABINETS, DRAWERS AND CORNERS WITH THE DYNABUG® MODEL 57920 1/4 SHEET FINISHING SANDER:
NON-VACUUM UNIT WEIGHS JUST 1 LB. AND HAS A TIGHT 3/32" 20,000 RPM ORBIT FOR FINE FINISHES. 8 SCFM @ 90 PSI; 1/4" NPT INLET. TURBINE STYLE VANELESS AIR MOTOR NEEDS NO OIL. INCLUDES A 4" X 4-5/16" VINYL FACE PAD FOR USE WITH PRESSURE SENSITIVE ADHESIVE (PSA) SANDPAPER (ORDER SEPARATELY); CLIPS ALSO LET YOU USE SHEET ABRASIVES.
|
|
|
|
Abrasives - Belts
|
SUPER FLEXIBLE PREMIUM J-WEIGHT CLOTH PUMP SLEEVES
|
| 8"x13-3/4" 100j Pump Sleeve J900
...plus other(s)
|
A&H ABRASIVES™ CLOTH PUMP SLEEVES ARE NON-LOADING AND HOLD THEIR ABRASIVE, EVEN ON THE EDGES:
USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Belts
|
SLIM DESIGN LETS MAKITA® 3/8" X 21" BELT SANDER FILE AND SAND IN CONFINED AREAS
|
| 1/4"x21" 80x A/o Belt
...plus other(s)
|
SPECIALLY DESIGNED TO FIT INTO TIGHT PLACES, THE MAKITA® 3/8" X 21" BELT SANDER RELIES ON VARIABLE 980-5,600 FPM SPEEDS TO INCREASE ITS VERSATILITY. IMPORTED.
ADJUSTABLE SANDING ARM PIVOTS 100° FOR HARD TO REACH AREAS.BELT TRACKING ADJUSTS WITH THE TURN OF A KNOB.INCLUDES TWO 80 GRIT BELTS AND COMPLETE INSTRUCTIONS.115V, 4.4A, 3.3 LBS.OPTIONAL 1/4" AND 1/2" ARM ASSEMBLIES AND BELTS AVAILABLE.
|
|
|
|
Abrasives - Belts
|
43" X 75" ALUMINUM OXIDE PAPER BACKED SANDING BELTS
|
| 43 X 75 120e A/o Paper Belt
...plus other(s)
|
A&H ABRASIVES™ 43" X 75" ALUMINUM OXIDE PAPER BACKED SANDING BELTS ARE NON-LOADING AND HOLD THEIR ABRASIVE, EVEN ON THE EDGES:
NOT RECOMMENDED FOR WET SANDING. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
to see Sub Categories)
