Product Category
(Click on  to see Sub Categories)
|
|---|
Abrasives (14)
Tools (14) |
|
|
Abrasives - Tools
|
PHENOLIC BACKING PLATES PROVIDE MAXIMUM FLEXIBILITY WHEN WORKING WITH RESIN FIBER ABRASIVE DISCS
|
| Spanner Wrench
...plus other(s)
|
PHENOLIC BACKING PLATES FIT ALL 5/8-11 THREAD SANDERS AND PROVIDE THE EXTRA SUPPORT NEEDED WHEN USING HEAVY DUTY RESIN FIBER ABRASIVE DISCS:
THREE SIZES TO SELECT FROM (3" RUBBER PAD MUST BE USED WITH EACH). OPTIONAL SPANNER WRENCH AND DISC PAD NUTS MAKE INSTALLATION FASTER AND EASIER.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
CERAMIC RESIN FIBER ABRASIVE DISCS - 127-504. ZIRCONIA ALUMINA ABRASIVE DISCS - 125-516. ALUMINUM OXIDE ABRASIVE DISCS - 100-808. SILICON CARBIDE ABRASIVE DISCS - 121-076.
|
|
|
|
Abrasives - Tools
|
SAND-O-FLEX SANDS CONTOURS WITHOUT CHANGING THEIR SHAPE
|
| Face Clip Set
...plus other(s)
|
DEVELOPED BACK IN 1945, SAND-O-FLEX IS A PROVEN, BRUSH BACKED SANDER DESIGNED FOR FINISHING A VARIETY OF COMPLEX SURFACES:
WITH ITS FIRM CUSHIONING BRISTLES, SAND-O-FLEX ABRASIVE STRIPS ARE FORCED INTO, AROUND AND OVER CORNERS, HOLLOW AND FLUTED SURFACES AND SMALL OPENINGS. PRESSURE IS DISTRIBUTED EVENLY OVER THE SURFACES TO PREVENT LOSS OF DETAIL AND THE FLATTENING OF ROUNDED AREAS; AS ABRASIVE WEARS, MORE CAN BE FED FROM THE HUB. INCLUDES 80 GRIT SLASHED ABRASIVE, BRUSHES AND 1/4" AND 3/8" DRILL ADAPTER. CHOOSE FROM TWO TYPES OF ABRASIVES - SLASHED OR PLAIN; SLASHED WORKS BEST WITH MOLDINGS AND ODD CONTOURS; USE PLAIN FOR FLAT SURFACES. ABRASIVE REFILLS AVAILABLE IN 60, 80, 120 AND 180 GRITS.
|
|
|
|
Abrasives - Tools
|
KIRJES® INFLATABLE SANDERS - THE SMOOTHEST AND MOST FLEXIBLE FORM OF SANDING
|
| 100k Complete Sanding Kit
...plus other(s)
|
KIRJES® INFLATABLE SANDERS HAVE THIN WALLED, RUBBER BODIES THAT ARE FITTED WITH SOFT, CLOTH BACKED SANDING SLEEVES. AS THE BODY IS PUMPED UP WITH AIR, THE SLEEVE IS HELD IN PLACE - IDEAL FOR SANDING CONVEX, CONCAVE OR FLAT SURFACES SINCE THE SANDER CONFORMS TO THE SURFACE:
100K COMPLETE SANDING KIT COMES WITH: 913K SANDING AND POLISHING MOTOR - 3,000 RPM, 115V; TWO CHUCKS OPEN 1/16" TO 3/8". 201 FLEXIBLE DRIVE SHAFT - 4'-3" LONG WITH KEYED CHUCK; 7/32" MOTOR END SHAFT. 140R INFLATABLE BOWL SANDER - 1-9/16" DIA. 120 INFLATABLE DRUM SANDER - 3/4" DIA. X 1" LONG. 130 INFLATABLE DRUM SANDER - 1-1/8" DIA. X 3-1/8" LONG. 140 INFLATABLE DRUM SANDER - 1-5/8" DIA. X 1-3/4" LONG. 911 DOUBLE ACTION HAND PUMP. FOUR 220 GRIT SANDING SLEEVES. WOODEN CASE, WRENCHES AND INSTRUCTIONS. 15 LBS. SHIPPING WEIGHT.
100 DRUM SANDING KIT INCLUDES CONTENTS OF COMPLETE SANDING KIT EXCLUDING MOTOR, FLEXIBLE SHAFT AND WRENCHES. 1 LB. SHIPPING WEIGHT.
SWEDEN.
|
|
|
|
Abrasives - Tools
|
SOLID SURFACE WORK IS FASTER AND EASIER WITH AN 11" DRIVE PAD ORBITAL SANDER
|
| Heavy Duty Drive Pad
...plus other(s)
|
THE HEAVY DUTY GEM INDUSTRIES' MODEL BW-H ORBITAL SANDER WEIGHS 16 LBS., BUT FEATURES A WELL BALANCED COUNTERWEIGHT SYSTEM THAT LETS YOU EASILY GUIDE ITS 11" DIA. DRIVE PAD AS IT SANDS WITH A MOTION LIKE THE HUMAN HAND:
110/220V, 2.3A BALL BEARING, CAPACITOR MOTOR - 1,700 ORBITS PER MINUTE GREATLY MINIMIZE POSSIBILITY OF SWIRL MARKS ASSOCIATED WITH HIGH-SPEED ROTARY BUFFERS. NO GEARS TO GRIND OR STRIP. NO ARMATURE WINDING TO BURN OUT. NO CARBON BRUSHES TO BURN OUT. HEAVY DUTY ALUMINUM HOUSING - WORKS EQUALLY WELL AND UNIFORMLY ON SOLID SURFACE AND WOOD PRODUCTS. INCLUDES MODEL C-515C DRIVE PAD WITH PAN AND HOOKIT™ II MOUNTING SYSTEM (ORDER SANDING DISCS OR PADS, SEPARATELY). SANDING DISCS OR PADS AVAILABLE IN SCOTCH-BRITE®, ALUMINUM OXIDE OR TRIZACT™ STRUCTURED ABRASIVES. MICRON GRADE VS. U.S. MESH GRADE: 30 = 400, 60 = 220, 80 = 180, 100 = 150, 180 = 80.
123-665 - MODEL C-515HD HEAVY DUTY DRIVE PAD FEATURES LAYER OF RUBBER FOR MORE AGGRESSIVE WORK - LASTS UP TO 5 TIMES LONGER AND HOLDS UP BETTER IN DAMP APPLICATIONS. 123-662 - MODEL S-112 SHROUD ELIMINATES MUCH OF THE DUST ASSOCIATED WITH SANDING OPERATIONS - 1-1/2" DIA. OUTLET INCLUDES ADAPTOR TO FIT 1-1/4" DIA. SHOP VACUUM HOSE. 123-671 - MODEL C-645S SOLID SURFACE COMPOUND PREPARES SURFACE FOR UNIFORM BONDING WITH ACRYLIC AND IS A REQUIRED FIRST STEP BEFORE APPLYING SEALANT - ONCE SANDING AND FINISHING ARE COMPLETE, APPLY COMPOUND WITH POLISHER/SANDER AND MICRO-FIBER BONNET. 123-668 - MODEL C-523S COUNTERTOP SEALANT SEALS SURFACE WITH A LAYER OF ACRYLIC, PROTECTS AGAINST SCRATCHES AND STAINS AND ELIMINATES MOST MAINTENANCE PROBLEMS ON SEMI-GLOSS AND HIGH GLOSS SURFACES.
|
|
|
|
Abrasives - Tools
|
2" AND 3" PAPER BACKED H&L SANDING DISCS PLUS HOLDERS
|
| 3" Extention For 1/4" Shank
...plus other(s)
|
USED BY BOWL TURNERS OR WHERE SMALL DETAIL SANDING IS REQUIRED, A&H ABRASIVES™ PAPER-BACKED SANDING DISCS ALLOW FOR STRONG ATTACHMENT AND QUICK CHANGING OF ABRASIVE GRITS:
HOOK & LOOP (H&L) DISCS ARE TOPPED WITH LUBRICANTS TO RESIST HEAT AND LOADING. ALUMINUM OXIDE GRAIN AND A FULL RESIN BOND FOR STRENGTH AND LONG LIFE. PRICED IN PACKS OF 10 OR 50 DISCS IN A CONVENIENT PLASTIC JAR WITH SCREW-ON LID. HOOK & LOOP HOLDERS ARE AVAILABLE IN SOFT OR FIRM DENSITY. USE FIRM FOR MORE AGGRESSIVE SANDING OR GENTLE CONTOURS AND SOFT FOR LESS AGGRESSIVE, MORE SEVERE CONTOURS OR FINER SANDING. 1/4" SHANKS ADAPT TO BOTH POWERED AND NON-POWERED TOOLS. SHANK EXTENSIONS CAN BE USED TO REACH DEEP INTO TURNINGS OR ANY TIME EXTRA LENGTH IS REQUIRED. USA. 853-042 - DEVELOPED BY AUSTRALIAN WOODTURNER TIM SKILTON, 2" AND 3" "TS" H&L DISC HOLDERS ARE LIMITED TO QUANTITIES ON HAND.
|
|
|
|
Abrasives - Tools
|
QUICK CHANGE SANDING BLOCK USES STANDARD SANDING BELTS
|
| 3x21blockw/10 Belts6080100120150
...plus other(s)
|
MADE FROM THERMOPLASTIC RUBBER, THIS VERSATILE, SPRING-LOADED SANDING BLOCK USES 3" X 21" SANDING BELTS AND IS DESIGNED TO MAKE IT EASIER THAN EVER TO ADVANCE THE BELT TO A CLEAN AND UNUSED SECTION:
LIFT THE LEVER AND A WORN BELT CAN BE EASILY ROTATED TO AN UNUSED SEGMENT OR REPLACED. PUSH THE LEVER DOWN AND THE SANDING BELT IS LOCKED AND LOADED, READY FOR USE. THE ROUNDED NOSE SANDS INTO RELATIVELY TIGHT SPACES. INCLUDES 10 SANDING BELTS - 60, 80, 100, 120, 150 GRIT (TWO EACH). USA.
|
|
|
|
Abrasives - Tools
|
DRUM SANDER KIT HAS SIZES TO PERFECTLY MATCH SPECIFIC JOBS
|
| 25 Pc Drum Sanding Kit
...plus other(s)
|
ALSO A LEICHTUNG WORK SHOPS® PRODUCT
25-PIECE STANDARD DRUM SANDER KIT HAS A HEX NUT THAT EXPANDS THE DRUM TO GRIP THE CLOTH-BACKED ABRASIVE SLEEVES, TIGHTLY - TO CHANGE SLEEVES, SIMPLY LOOSEN THE NUT:
KIT COMES WITH FIVE DRUMS (1/2"X1/2", 3/4"X1", 1"X1", 1-1/2"X1-1/2", 2"X1-1/2") AND FOUR ABRASIVE SLEEVES (#50 COARSE, #80 MEDIUM, #120 FINE, #180 FINE) FOR EACH DRUM. STANDARD SLEEVE SETS INCLUDE THREE, EACH, #50, #80, #120 AND #180 REPLACEMENT SLEEVES. DESIGNED FOR DISCONTINUED, EXTRA-LONG DRUM SANDER KIT 23-697, EXTRA-LONG SLEEVE SETS INCLUDE THREE, EACH, #50, #80, #120 AND #180 SLEEVES THAT FIT 2" LONG DRUMS (NOT INCLUDED).
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Tools
|
REPLACEMENT ACCESSORIES FOR SAND-RITE DB-612 PNEUMATIC DRUM/BRUSH HEAD SANDERS
|
| Db-612 Air Valve Assembly
...plus other(s)
|
YOU CAN EASILY MAINTAIN YOUR SAND-RITE DB-612 SANDER WITH FACTORY ORIGINAL REPLACEMENT ACCESSORIES AT SPECIALLY REDUCED, SELL OUT PRICES:
6" X 7" CANVAS JACKETS, RUBBER TUBES AND AIR VALVE ASSEMBLIES PROVIDE OEM CONVENIENCE. PNEUMATIC SANDING DRUMS HAVE 1" DIA. BORES. CUSHIONING ACTION OF THE DRUMS HELPS EXTEND THE LIVES OF THE ALUMINUM OXIDE SANDING SLEEVES. USA.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Tools
|
PSA SANDING PROFILES EASILY HANDLE CONTOUR SANDING
|
| Tadpole Iv Large Convex Grip Set
...plus other(s)
|
USE SOFT, PREFORMED SANDING PROFILES ALONG WITH PRESSURE SENSITIVE ADHESIVE (PSA) SANDPAPER TO SMOOTH ALMOST ANY SURFACE:
CHOOSE FROM FLAT, CONCAVE, CONVEX OR ANGLED PROFILES.
LIMITED TO QUANTITIES ON HAND.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
PRECUT PSA SANDPAPER - 123-596.
|
|
|
|
Abrasives - Tools
|
BETTER THAN SANDING SPONGES - 5" AND 6" HAND SANDING PADS ARE REUSABLE!
|
| 5" H&l 1/8" Thick Super-flex Pad
...plus other(s)
|
HAND SANDING PADS BEAT FOLDING SANDING DISCS IN HALF AND WEARING DOWN YOUR FINGERS. THESE SPONGE PADS BACK UP SANDING DISCS, SAVING YOUR FINGERPRINTS, ENSURING CONSISTENT SURFACES AND HELPING SANDPAPER LAST LONGER:
5" AND 6" DIA. HOOK & LOOP (H&L) AND PRESSURE SENSITIVE ADHESIVE (PSA) PADS ARE AVAILABLE IN FLEX OR THINNER SUPER-FLEX. THREE-PIECE SET CONTAINS 908-253, 113-747 AND 113-750.
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
5" H&L SANDING DISCS - 112-439. 6" PSA SANDING DISCS - 864-059.
|
|
|
|
Abrasives - Tools
|
BEAUTIFUL HAND SANDING TOOLS WORK AS GREAT AS THEY LOOK
|
| 6" Rd Psa Hand Sander
...plus other(s)
|
FINE QUALITY AND PERFECT BALANCE MAKE THESE VERSATILE HAND SANDERS A PLEASURE TO USE:
SILKY SMOOTH WOODEN HANDLES. 1/8" THICK ALUMINUM PLATES. USE PRESSURE SENSITIVE ADHESIVE (PSA) BACKED ABRASIVES - PSA ADHERES SOLIDLY BUT REMOVES EASILY WHEN WORN.
LIMITED TO QUANTITIES ON HAND
|
|
|
|
Abrasives - Tools
|
HAND SANDING BLOCKS FOR ALMOST EVERY IMAGINABLE SHAPE
|
| Curv-a-flex
...plus other(s)
|
CURVED PIECES, TIGHT CORNERS, NOOKS AND CRANNIES ARE ALL EASIER TO SAND WITH THESE COMFORTABLE, PREMOLDED OR MEDIUM DENSITY RUBBER HAND SANDING BLOCKS:
920-555 - CURV-A-FLEX™ CAN BE ROLLED TIGHTER OR LOOSER TO MATCH ANY RADIUS YOU NEED TO SAND. 5-1/2"L X 2-1/8" OD RADIUS CURVE - PREMOLDED RUBBER. 920-565 - 5" TRUE FLAT PUTS A LOT OF PAPER IN CONTACT WITH THE WOOD TO SPEED PANEL SANDING. 2-3/4"W X 5"L - MEDIUM DENSITY RUBBER. 920-569 - 9" TRUE FLAT IS SIMILAR TO 5" TRUE FLAT BUT IS 9"L. 920-576 - LARGE TEARDROP™ HAS SHARP POINTS AND EDGES THAT ARE GREAT FOR SANDING GLUE FROM CORNERS, WHILE THE SMOOTH RADIUS MAKES IT USEFUL FOR CURVED PIECES. SPLIT DESIGN LOCKS ABRASIVE PAPER IN PLACE. 5-1/2"L X 1-5/8" OD RADIUS CURVE - PREMOLDED RUBBER. 920-583 - SMALL TEARDROP™ IS SIMILAR TO LARGE TEARDROP BUT IS 2-1/2"L. 920-590 - DOUBLE DENSITY BLOCKS HAVE A FIRM SIDE FOR SANDING PANELS AND A SOFTER SIDE FOR CONTOURS. "H X "W X "L - SOFT RUBBER, CAN BE USED FOR WET OR DRY SANDING. 920-592 - BUY ALL SIX SANDING BLOCKS AT ONE TIME AND SAVE ON PRICE AND SHIPPING! SANDING BLOCKS CAN USE 1/4 AND 1/2 SHEET OR ROLL STOCK ABRASIVES (NOT INCLUDED).
TO HELP COMPLETE YOUR PROJECT, MAY WE SUGGEST:
111-122 - 9" X 11" ALUMINUM OXIDE SANDPAPER SHEETS.
|
|
|
|
Abrasives - Tools
|
SAND TRICKY CONTOURS USING YOUR DRILL PRESS OR LATHE
|
| Contour Sander Package
...plus other(s)
|
THE DRUM IN THE VERSATILE A&H ABRASIVES™ CONTOUR SANDER PACKAGE IS INFLATED TO THE DESIRED FIRMNESS AND MOUNTED ONTO YOUR DRILL PRESS OR LATHE (MAXIMUM 1,750 RPM), LEAVING BOTH HANDS FREE TO MANIPULATE THE WORKPIECE:
HEAVY DUTY, CANVAS COVERED RUBBER DRUM ACCEPTS 2-3/8" DIA. X 8" LONG SANDING SLEEVES - INFLATE OR DEFLATE DRUM TO MATCH SHAPE BEING SANDED. INCLUDES MOUNTING HARDWARE AND FIVE, EACH, 80, 100, 120 AND 150 GRIT CLOTH BACKED, ALUMINUM OXIDE SANDING SLEEVES. 956-287 - OPTIONAL HAND PUMP MAKES INFLATION EASY. IMPORTED. ADDITIONAL 2-3/8" DIA. X 8" LONG SANDING SLEEVES CAN BE ORDERED SEPARATELY. USA.
|
|
|
|
Abrasives - Tools
|
INTRICATE SANDING INSTRUMENTS
|
| 24 Pc Standard Kit
...plus other(s)
|
THESE 6-1/4" LONG INTRICATE SANDING INSTRUMENTS ARE ACTUALLY THREE TOOLS IN ONE: ABRASIVE BELTS THAT RUN AROUND OUTSIDE OF DETAIL TOOLS WORK AS MINI BLOCK SANDERS; TAPERED TIPS GET INTO TIGHT CORNERS YOU CAN'T REACH AND OPPOSITE ROUNDED ENDS SAND HARD TO REACH CURVES:
952-311 - 24 PIECE STANDARD KIT INCLUDES SIX, EACH, 1/4" WIDE 80, 120, 180 AND 240 GRIT BELTS. 952-318 - 24 PIECE FINISHING KIT INCLUDES SIX, EACH, 1/4" WIDE 240, 320, 400 AND 600 GRIT BELTS. EACH KIT COMES WITH FOUR, COLOR CODED DETAIL TOOLS; COLORS HELP IDENTIFY AND SEPARATE GRITS. PACKAGES OF 20 REPLACEMENTS BELTS ARE AVAILABLE IN SEVEN GRITS RANGING FROM 80 TO 600.
|
|
|
|
